123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
- #include "../../inc/MarlinConfig.h"
-
- #if HAS_PID_HEATING
-
- #include "../gcode.h"
- #include "../../lcd/marlinui.h"
- #include "../../module/temperature.h"
-
- #if ENABLED(EXTENSIBLE_UI)
- #include "../../lcd/extui/ui_api.h"
- #elif ENABLED(DWIN_LCD_PROUI)
- #include "../../lcd/e3v2/proui/dwin.h"
- #endif
-
- /**
- * M303: PID relay autotune
- *
- * S<temperature> Set the target temperature. (Default: 150C / 70C)
- * E<extruder> Extruder number to tune, or -1 for the bed. (Default: E0)
- * C<cycles> Number of times to repeat the procedure. (Minimum: 3, Default: 5)
- * U<bool> Flag to apply the result to the current PID values
- *
- * With PID_DEBUG, PID_BED_DEBUG, or PID_CHAMBER_DEBUG:
- * D Toggle PID debugging and EXIT without further action.
- */
-
- void GcodeSuite::M303() {
-
- #if HAS_PID_DEBUG
- if (parser.seen_test('D')) {
- thermalManager.pid_debug_flag ^= true;
- SERIAL_ECHO_START();
- SERIAL_ECHOPGM("PID Debug ");
- serialprintln_onoff(thermalManager.pid_debug_flag);
- return;
- }
- #endif
-
- const heater_id_t hid = (heater_id_t)parser.intval('E');
- celsius_t default_temp;
- switch (hid) {
- #if ENABLED(PIDTEMP)
- case 0 ... HOTENDS - 1: default_temp = PREHEAT_1_TEMP_HOTEND; break;
- #endif
- #if ENABLED(PIDTEMPBED)
- case H_BED: default_temp = PREHEAT_1_TEMP_BED; break;
- #endif
- #if ENABLED(PIDTEMPCHAMBER)
- case H_CHAMBER: default_temp = PREHEAT_1_TEMP_CHAMBER; break;
- #endif
- default:
- SERIAL_ECHOPGM(STR_PID_AUTOTUNE);
- SERIAL_ECHOLNPGM(STR_PID_BAD_HEATER_ID);
- TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_BAD_EXTRUDER_NUM));
- TERN_(DWIN_LCD_PROUI, DWIN_PidTuning(PID_BAD_EXTRUDER_NUM));
- return;
- }
-
- const bool seenC = parser.seenval('C');
- const int c = seenC ? parser.value_int() : 5;
- const bool seenS = parser.seenval('S');
- const celsius_t temp = seenS ? parser.value_celsius() : default_temp;
- const bool u = parser.boolval('U');
-
- #if ENABLED(DWIN_LCD_PROUI)
- if (seenC) HMI_data.PidCycles = c;
- if (seenS) { if (hid == H_BED) HMI_data.BedPidT = temp; else HMI_data.HotendPidT = temp; }
- #endif
-
- #if DISABLED(BUSY_WHILE_HEATING)
- KEEPALIVE_STATE(NOT_BUSY);
- #endif
-
- LCD_MESSAGE(MSG_PID_AUTOTUNE);
- thermalManager.PID_autotune(temp, hid, c, u);
- ui.reset_status();
- }
-
- #endif // HAS_PID_HEATING
|