123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- //#define BOARD_CUSTOM_BUILD_FLAGS -DTONE_CHANNEL=4 -DTONE_TIMER=4 -DTIMER_TONE=4
-
- #include "env_validate.h"
-
- #if HOTENDS > 1 || E_STEPPERS > 1
- #error "BTT SKR Mini E3 V3.0.1 supports up to 1 hotend / E stepper."
- #endif
-
- #ifndef BOARD_INFO_NAME
- #define BOARD_INFO_NAME "BTT SKR Mini E3 V3.0.1"
- #endif
-
- #define USES_DIAG_JUMPERS
-
- // Ignore temp readings during development.
- //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
-
- #ifndef NEOPIXEL_LED
- #define LED_PIN PA14
- #endif
-
- // Onboard I2C EEPROM
- #if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
- #undef NO_EEPROM_SELECTED
- #define I2C_EEPROM
- #define SOFT_I2C_EEPROM // Force the use of Software I2C
- #define I2C_SCL_PIN PB8
- #define I2C_SDA_PIN PB9
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K
- #endif
-
- //
- // Servos
- //
- #define SERVO0_PIN PA0 // SERVOS
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN PB5 // X-STOP
- #define Y_STOP_PIN PB6 // Y-STOP
- #define Z_STOP_PIN PB7 // Z-STOP
-
- //
- // Z Probe must be this pin
- //
- #define Z_MIN_PROBE_PIN PA1 // PROBE
-
- //
- // Filament Runout Sensor
- //
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN PC15 // E0-STOP
- #endif
-
- //
- // Power-loss Detection
- //
- #ifndef POWER_LOSS_PIN
- #define POWER_LOSS_PIN PC13 // Power Loss Detection: PWR-DET
- #endif
-
- #ifndef NEOPIXEL_PIN
- #define NEOPIXEL_PIN PA14 // LED driving pin
- #endif
-
- #ifndef PS_ON_PIN
- #define PS_ON_PIN PC14 // Power Supply Control
- #endif
-
- //
- // Steppers
- //
- #define X_ENABLE_PIN PC10
- #define X_STEP_PIN PC11
- #define X_DIR_PIN PC12
-
- #define Y_ENABLE_PIN PB13
- #define Y_STEP_PIN PB12
- #define Y_DIR_PIN PB10
-
- #define Z_ENABLE_PIN PB2
- #define Z_STEP_PIN PB1
- #define Z_DIR_PIN PB0
-
- #define E0_ENABLE_PIN PC3
- #define E0_STEP_PIN PC2
- #define E0_DIR_PIN PC1
-
- #if HAS_TMC_UART
- /**
- * TMC220x stepper drivers
- * Hardware serial communication ports
- */
- #define X_HARDWARE_SERIAL MSerial6
- #define Y_HARDWARE_SERIAL MSerial6
- #define Z_HARDWARE_SERIAL MSerial6
- #define E0_HARDWARE_SERIAL MSerial6
-
- // Default TMC slave addresses
- #ifndef X_SLAVE_ADDRESS
- #define X_SLAVE_ADDRESS 0
- #endif
- #ifndef Y_SLAVE_ADDRESS
- #define Y_SLAVE_ADDRESS 2
- #endif
- #ifndef Z_SLAVE_ADDRESS
- #define Z_SLAVE_ADDRESS 1
- #endif
- #ifndef E0_SLAVE_ADDRESS
- #define E0_SLAVE_ADDRESS 3
- #endif
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PC5 // Analog Input "TH0"
- #define TEMP_BED_PIN PC4 // Analog Input "TB0"
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PA15 // "HE"
- #define HEATER_BED_PIN PB3 // "HB"
- #define FAN_PIN PC9 // "FAN0"
- #define FAN1_PIN PA8 // "FAN1"
- #define FAN2_PIN PC8 // "FAN2"
-
- /**
- * SKR Mini E3 V3.0.1
- * ------
- * (BEEPER) PB15 | 1 2 | PB14 (BTN_ENC)
- * (BTN_EN1) PA9 | 3 4 | RESET
- * (BTN_EN2) PA10 5 6 | PB4 (LCD_D4)
- * (LCD_RS) PD2 | 7 8 | PC0 (LCD_EN)
- * GND | 9 10 | 5V
- * ------
- * EXP1
- */
- #define EXP1_01_PIN PB15
- #define EXP1_02_PIN PB14
- #define EXP1_03_PIN PA9
- #define EXP1_04_PIN -1 // RESET
- #define EXP1_05_PIN PA10
- #define EXP1_06_PIN PB4
- #define EXP1_07_PIN PD2
- #define EXP1_08_PIN PC0
-
- #if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
- /**
- * ------ ------ ------
- * (ENT) | 1 2 | (BEEP) |10 9 | |10 9 |
- * (RX) | 3 4 | (RX) | 8 7 | (TX) RX | 8 7 | TX
- * (TX) 5 6 | (ENT) 6 5 | (BEEP) ENT | 6 5 | BEEP
- * (B) | 7 8 | (A) (B) | 4 3 | (A) B | 4 3 | A
- * GND | 9 10 | (VCC) GND | 2 1 | VCC GND | 2 1 | VCC
- * ------ ------ ------
- * EXP1 DWIN DWIN (plug)
- *
- * All pins are labeled as printed on DWIN PCB. Connect TX-TX, A-A and so on.
- */
-
- #error "DWIN_CREALITY_LCD requires a custom cable, see diagram above this line. Comment out this line to continue."
-
- #define BEEPER_PIN EXP1_02_PIN
- #define BTN_EN1 EXP1_08_PIN
- #define BTN_EN2 EXP1_07_PIN
- #define BTN_ENC EXP1_01_PIN
-
- #elif HAS_WIRED_LCD
-
- #if ENABLED(CR10_STOCKDISPLAY)
-
- #define BEEPER_PIN EXP1_01_PIN
- #define BTN_ENC EXP1_02_PIN
-
- #define BTN_EN1 EXP1_03_PIN
- #define BTN_EN2 EXP1_05_PIN
-
- #define LCD_PINS_RS EXP1_07_PIN
- #define LCD_PINS_ENABLE EXP1_08_PIN
- #define LCD_PINS_D4 EXP1_06_PIN
-
- #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
-
- #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
- #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
- #endif
-
- #define LCD_PINS_RS EXP1_06_PIN
- #define LCD_PINS_ENABLE EXP1_02_PIN
- #define LCD_PINS_D4 EXP1_07_PIN
- #define LCD_PINS_D5 EXP1_05_PIN
- #define LCD_PINS_D6 EXP1_03_PIN
- #define LCD_PINS_D7 EXP1_01_PIN
- #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
-
- #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
-
- #define BTN_ENC EXP1_02_PIN
- #define BTN_EN1 EXP1_03_PIN
- #define BTN_EN2 EXP1_05_PIN
-
- #define DOGLCD_CS EXP1_07_PIN
- #define DOGLCD_A0 EXP1_06_PIN
- #define DOGLCD_SCK EXP1_01_PIN
- #define DOGLCD_MOSI EXP1_08_PIN
-
- #define FORCE_SOFT_SPI
- #define LCD_BACKLIGHT_PIN -1
-
- #elif IS_TFTGLCD_PANEL
-
- #if ENABLED(TFTGLCD_PANEL_SPI)
-
- #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
- #error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
- #endif
-
- /**
- * TFTGLCD_PANEL_SPI display pinout
- *
- * Board Display
- * ------ ------
- * (BEEPER) PB6 | 1 2 | PB15 (SD_DET) 5V |10 9 | GND
- * RESET | 3 4 | PA9 (MOD_RESET) -- | 8 7 | (SD_DET)
- * PB4 5 6 | PA10 (SD_CS) (MOSI) | 6 5 | --
- * PB7 | 7 8 | PD2 (LCD_CS) (SD_CS) | 4 3 | (LCD_CS)
- * GND | 9 10 | 5V (SCK) | 2 1 | (MISO)
- * ------ ------
- * EXP1 EXP1
- *
- * Needs custom cable:
- *
- * Board Display
- *
- * EXP1-10 ---------- EXP1-10
- * EXP1-9 ----------- EXP1-9
- * SPI1-4 ----------- EXP1-6
- * EXP1-7 ----------- FREE
- * SPI1-3 ----------- EXP1-2
- * EXP1-5 ----------- EXP1-4
- * EXP1-4 ----------- FREE
- * EXP1-3 ----------- EXP1-3
- * SPI1-1 ----------- EXP1-1
- * EXP1-1 ----------- EXP1-7
- */
-
- #define TFTGLCD_CS EXP1_03_PIN
-
- #endif
-
- #else
- #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and TFTGLCD_PANEL_(SPI|I2C) are currently supported on the BIGTREE_SKR_MINI_E3."
- #endif
-
- #endif // HAS_WIRED_LCD
-
- #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
-
- #ifndef NO_CONTROLLER_CUSTOM_WIRING_WARNING
- #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
- #endif
-
- /**
- * FYSETC TFT TFT81050 display pinout
- *
- * Board Display
- * ------ ------
- * (SD_DET) PB15 | 1 2 | PB6 (BEEPER) 5V |10 9 | GND
- * (MOD_RESET) PA9 | 3 4 | RESET (RESET) | 8 7 | (SD_DET)
- * (SD_CS) PA10 5 6 | PB4 (FREE) (MOSI) | 6 5 | (LCD_CS)
- * (LCD_CS) PD2 | 7 8 | PB7 (FREE) (SD_CS) | 4 3 | (MOD_RESET)
- * 5V | 9 10 | GND (SCK) | 2 1 | (MISO)
- * ------ ------
- * EXP1 EXP1
- *
- * Needs custom cable:
- *
- * Board Adapter Display
- * _________
- * EXP1-10 ---------- EXP1-10
- * EXP1-9 ----------- EXP1-9
- * SPI1-4 ----------- EXP1-6
- * EXP1-7 ----------- EXP1-5
- * SPI1-3 ----------- EXP1-2
- * EXP1-5 ----------- EXP1-4
- * EXP1-4 ----------- EXP1-8
- * EXP1-3 ----------- EXP1-3
- * SPI1-1 ----------- EXP1-1
- * EXP1-1 ----------- EXP1-7
- */
-
- #define CLCD_SPI_BUS 1 // SPI1 connector
-
- #define BEEPER_PIN EXP1_02_PIN
-
- #define CLCD_MOD_RESET EXP1_03_PIN
- #define CLCD_SPI_CS EXP1_07_PIN
-
- #endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
-
- //
- // SD Support
- //
-
- #ifndef SDCARD_CONNECTION
- #define SDCARD_CONNECTION ONBOARD
- #endif
-
- #if SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL)
- #define SD_DETECT_PIN EXP1_01_PIN
- #define SD_SS_PIN EXP1_05_PIN
- #elif SD_CONNECTION_IS(CUSTOM_CABLE)
- #error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
- #endif
-
- #define ONBOARD_SPI_DEVICE 1 // SPI1 -> used only by HAL/STM32F1...
- #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
-
- #define ENABLE_SPI1
- #define SDSS ONBOARD_SD_CS_PIN
- #define SD_SS_PIN ONBOARD_SD_CS_PIN
- #define SD_SCK_PIN PA5
- #define SD_MISO_PIN PA6
- #define SD_MOSI_PIN PA7
|