123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #define ALLOW_STM32DUINO
- #include "env_validate.h"
-
- #if HOTENDS > 6 || E_STEPPERS > 6
- #error "FLYF407ZG supports up to 6 hotends / E steppers."
- #endif
-
- #define BOARD_INFO_NAME "FLYF407ZG"
- #define BOARD_WEBSITE_URL "github.com/FLYmaker/FLYF407ZG"
- #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
-
- // Avoid conflict with fans and TIMER_TONE
- #define TEMP_TIMER 3
- #define STEP_TIMER 5
-
- //
- // EEPROM Emulation
- //
- #if NO_EEPROM_SELECTED
- #define FLASH_EEPROM_EMULATION
- //#define SRAM_EEPROM_EMULATION
- //#define I2C_EEPROM
- #endif
-
- #if ENABLED(FLASH_EEPROM_EMULATION)
- // Decrease delays and flash wear by spreading writes across
- // the 128kB sector allocated for EEPROM emulation.
- #define FLASH_EEPROM_LEVELING
- #elif ENABLED(I2C_EEPROM)
- #define MARLIN_EEPROM_SIZE 0x2000 // 8K
- #endif
-
- #ifndef MARLIN_EEPROM_SIZE
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K
- #endif
-
- //
- // Servos
- //
- #define SERVO0_PIN PE11
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN PC3
- #define X_MAX_PIN PC2
- #define Y_MIN_PIN PF2
- #define Y_MAX_PIN PF1
- #define Z_MIN_PIN PF0
- #define Z_MAX_PIN PC15
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #define Z_MIN_PROBE_PIN PC14 // Z3_PIN
-
- //
- // Steppers
- //
-
- #define X_STEP_PIN PB9
- #define X_DIR_PIN PE0
- #define X_ENABLE_PIN PE1
- #ifndef X_CS_PIN
- #define X_CS_PIN PG13
- #endif
-
- #define Y_STEP_PIN PB8
- #define Y_DIR_PIN PG11
- #define Y_ENABLE_PIN PG12
- #ifndef Y_CS_PIN
- #define Y_CS_PIN PG10
- #endif
-
- #define Z_STEP_PIN PA8
- #define Z_DIR_PIN PD6
- #define Z_ENABLE_PIN PD7
- #ifndef Z_CS_PIN
- #define Z_CS_PIN PD5
- #endif
-
- #define E0_STEP_PIN PC7
- #define E0_DIR_PIN PD3
- #define E0_ENABLE_PIN PD4
- #ifndef E0_CS_PIN
- #define E0_CS_PIN PD1
- #endif
-
- #define E1_STEP_PIN PC6
- #define E1_DIR_PIN PA15
- #define E1_ENABLE_PIN PD0
- #ifndef E1_CS_PIN
- #define E1_CS_PIN PA14
- #endif
-
- #define E2_STEP_PIN PD15
- #define E2_DIR_PIN PG7
- #define E2_ENABLE_PIN PG8
- #ifndef E2_CS_PIN
- #define E2_CS_PIN PG6
- #endif
-
- #define E3_STEP_PIN PD14
- #define E3_DIR_PIN PG4
- #define E3_ENABLE_PIN PG5
- #ifndef E3_CS_PIN
- #define E3_CS_PIN PG3
- #endif
-
- #define E4_STEP_PIN PD13
- #define E4_DIR_PIN PD11
- #define E4_ENABLE_PIN PG2
- #ifndef E4_CS_PIN
- #define E4_CS_PIN PD10
- #endif
-
- #define E5_STEP_PIN PD12
- #define E5_DIR_PIN PD8
- #define E5_ENABLE_PIN PD9
- #ifndef E5_CS_PIN
- #define E5_CS_PIN PB12
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PA0 // Analog Input
- #define TEMP_1_PIN PC1 // Analog Input
- #define TEMP_2_PIN PC0 // Analog Input
- #define TEMP_3_PIN PF10 // Analog Input
- #define TEMP_4_PIN PF5 // Analog Input
- #define TEMP_5_PIN PF4 // Analog Input
- #define TEMP_BED_PIN PF3 // Analog Input
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PF7
- #define HEATER_1_PIN PF6
- #define HEATER_2_PIN PE6
- #define HEATER_3_PIN PE5
- #define HEATER_4_PIN PE4
- #define HEATER_5_PIN PE3
- #define HEATER_BED_PIN PE2
-
- #ifndef FAN_PIN
- #define FAN_PIN PF8
- #endif
- #define FAN1_PIN PF9
- #define FAN2_PIN PA2
- #define FAN3_PIN PA1
- #define FAN4_PIN PE13
- #define FAN5_PIN PB11
-
- /**
- * ------ ------
- * PB10 | 1 2 | PE15 PB14 | 1 2 | PB13
- * PE14 | 3 4 | PE12 PC5 | 3 4 | PF11
- * PE10 5 6 | PE9 PC4 5 6 | PB15
- * PE8 | 7 8 | PE7 PB2 | 7 8 | RESET
- * GND | 9 10 | 5V GND | 9 10 | --
- * ------ ------
- * EXP1 EXP2
- */
- #define EXP1_01_PIN PB10
- #define EXP1_02_PIN PE15
- #define EXP1_03_PIN PE14
- #define EXP1_04_PIN PE12
- #define EXP1_05_PIN PE10
- #define EXP1_06_PIN PE9
- #define EXP1_07_PIN PE8
- #define EXP1_08_PIN PE7
-
- #define EXP2_01_PIN PB14
- #define EXP2_02_PIN PB13
- #define EXP2_03_PIN PC5
- #define EXP2_04_PIN PF11
- #define EXP2_05_PIN PC4
- #define EXP2_06_PIN PB15
- #define EXP2_07_PIN PB2
- #define EXP2_08_PIN -1 // RESET
-
- //
- // Onboard SD support
- //
- //#define SD_CARD_DETECT_PIN PC13
-
- #ifndef SDCARD_CONNECTION
- #define SDCARD_CONNECTION ONBOARD
- #endif
-
- #if SD_CONNECTION_IS(ONBOARD)
-
- #define SDIO_SUPPORT // Use SDIO for onboard SD
-
- #if DISABLED(SDIO_SUPPORT)
- #define SOFTWARE_SPI // Use soft SPI for onboard SD
- #define SDSS PC11
- #define SD_SCK_PIN PC12
- #define SD_MISO_PIN PC8
- #define SD_MOSI_PIN PD2
- #endif
-
- #elif SD_CONNECTION_IS(LCD)
-
- #define SD_SCK_PIN EXP2_02_PIN
- #define SD_MISO_PIN EXP2_01_PIN
- #define SD_MOSI_PIN EXP2_06_PIN
- #define SDSS EXP2_04_PIN
- #define SD_DETECT_PIN EXP2_07_PIN
-
- #endif
-
- //
- // Trinamic Software SPI
- //
- #if ENABLED(TMC_USE_SW_SPI)
- #ifndef TMC_SW_SCK
- #define TMC_SW_SCK EXP2_02_PIN
- #endif
- #ifndef TMC_SW_MISO
- #define TMC_SW_MISO EXP2_01_PIN
- #endif
- #ifndef TMC_SW_MOSI
- #define TMC_SW_MOSI EXP2_06_PIN
- #endif
- #endif
-
- //
- // Trinamic Software Serial
- //
-
- #if HAS_TMC_UART
- #define X_SERIAL_TX_PIN PG13
- #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
-
- #define Y_SERIAL_TX_PIN PG10
- #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
-
- #define Z_SERIAL_TX_PIN PD5
- #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
-
- #define E0_SERIAL_TX_PIN PD1
- #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
-
- #define E1_SERIAL_TX_PIN PA14
- #define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
-
- #define E2_SERIAL_TX_PIN PG6
- #define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
-
- #define E3_SERIAL_TX_PIN PG3
- #define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
-
- #define E4_SERIAL_TX_PIN PD10
- #define E4_SERIAL_RX_PIN E4_SERIAL_TX_PIN
-
- #define E5_SERIAL_TX_PIN PB12
- #define E5_SERIAL_RX_PIN E5_SERIAL_TX_PIN
- #endif
-
- //
- // LCD / Controller
- //
- #if IS_RRD_SC
- #define BEEPER_PIN EXP1_01_PIN
- #define LCD_PINS_RS EXP1_04_PIN
- #define LCD_PINS_ENABLE EXP1_03_PIN
- #define LCD_PINS_D4 EXP1_05_PIN
- #define LCD_PINS_D5 EXP1_06_PIN
- #define LCD_PINS_D6 EXP1_07_PIN
- #define LCD_PINS_D7 EXP1_08_PIN
- #define BTN_EN1 EXP2_05_PIN
- #define BTN_EN2 EXP2_03_PIN
- #define BTN_ENC EXP1_02_PIN
- #endif
-
- //
- // Filament runout
- //
-
- #define FIL_RUNOUT_PIN PA3
-
- // Alter timing for graphical display
- #if IS_U8GLIB_ST7920
- #define BOARD_ST7920_DELAY_1 96
- #define BOARD_ST7920_DELAY_2 48
- #define BOARD_ST7920_DELAY_3 715
- #endif
|