1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #define BOARD_INFO_NAME "FYSETC S6 2.0"
-
- //
- // EEPROM Emulation
- //
- #if NO_EEPROM_SELECTED
- #undef NO_EEPROM_SELECTED
- //#define FLASH_EEPROM_EMULATION
- #define I2C_EEPROM
- #endif
-
- //
- // Steppers
- //
- #define X_ENABLE_PIN PE9
-
- #if HAS_TMC_UART
- #define X_SERIAL_TX_PIN PE8
- #define X_SERIAL_RX_PIN PE8
- #define Y_SERIAL_TX_PIN PC4
- #define Y_SERIAL_RX_PIN PC4
- #define Z_SERIAL_TX_PIN PD12
- #define Z_SERIAL_RX_PIN PD12
- #define E0_SERIAL_TX_PIN PA15
- #define E0_SERIAL_RX_PIN PA15
- #define E1_SERIAL_TX_PIN PC5
- #define E1_SERIAL_RX_PIN PC5
- #define E2_SERIAL_TX_PIN PE0
- #define E2_SERIAL_RX_PIN PE0
- #endif
-
- //
- // Software SPI pins for TMC2130 stepper drivers
- //
- #define TMC_USE_SW_SPI
- #if ENABLED(TMC_USE_SW_SPI)
- #ifndef TMC_SW_MOSI
- #define TMC_SW_MOSI PE14
- #endif
- #ifndef TMC_SW_MISO
- #define TMC_SW_MISO PE13
- #endif
- #ifndef TMC_SW_SCK
- #define TMC_SW_SCK PE12
- #endif
- #endif
-
- #include "pins_FYSETC_S6.h"
|