123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #define ALLOW_STM32DUINO
- #include "env_validate.h"
-
- #if HOTENDS > 3 || E_STEPPERS > 5
- #error "MKS Monster supports up to 3 hotends and 5 E steppers."
- #elif HAS_FSMC_TFT
- #error "MKS Monster doesn't support FSMC-based TFT displays."
- #endif
-
- #define HAS_OTG_USB_HOST_SUPPORT // USB Flash Drive support
- #define USES_DIAG_JUMPERS
-
- //#define DISABLE_DEBUG
-
- // Avoid conflict with TIMER_TONE
- #define STEP_TIMER 10
-
- // Use one of these or SDCard-based Emulation will be used
- //#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
- //#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
- #define I2C_EEPROM // Need use jumpers set i2c for EEPROM
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K
- #define I2C_SCL_PIN PB8 // I2C_SCL and CAN_RX
- #define I2C_SDA_PIN PB9 // I2C_SDA and CAN_TX
-
- //
- // Servos
- //
- #define SERVO0_PIN PA8 // Enable BLTOUCH
-
- //
- // Limit Switches for diag signals
- //
- #define X_DIAG_PIN PA14 // Driver0 diag signal is connected to X-
- #define Y_DIAG_PIN PA15 // Driver1 diag signal is connected to Y-
- #define Z_DIAG_PIN PB13 // Driver2 diag signal is connected to Z-
- #define E0_DIAG_PIN PA13 // Driver3 diag signal is connected to X+
- #define E1_DIAG_PIN PC5 // Driver4 diag signal is connected to Y+
- #define E2_DIAG_PIN PB12 // Driver5 diag signal is connected to Z+
- #define E3_DIAG_PIN -1 // Driver6 diag signal is not connected
- #define E4_DIAG_PIN -1 // Driver7 diag signal is not connected
-
- // Limit Switches for endstops
- #define X_MIN_PIN PA14
- #define Y_MIN_PIN PA15
- #define Z_MIN_PIN PB13
- #define Z_MAX_PIN PB12
-
- //
- // Steppers
- //
- #define X_ENABLE_PIN PC15 // Driver0
- #define X_STEP_PIN PC14
- #define X_DIR_PIN PC13
- #ifndef X_CS_PIN
- #define X_CS_PIN PE6
- #endif
-
- #define Y_ENABLE_PIN PC15 // Driver1
- #define Y_STEP_PIN PE5
- #define Y_DIR_PIN PE4
- #ifndef Y_CS_PIN
- #define Y_CS_PIN PE3
- #endif
-
- #define Z_ENABLE_PIN PE2 // Driver2
- #define Z_STEP_PIN PE1
- #define Z_DIR_PIN PE0
- #ifndef Z_CS_PIN
- #define Z_CS_PIN PB7
- #endif
-
- #define E0_ENABLE_PIN PB6 // Driver3
- #define E0_STEP_PIN PB5
- #define E0_DIR_PIN PB4
- #ifndef E0_CS_PIN
- #define E0_CS_PIN PB3
- #endif
-
- #define E1_ENABLE_PIN PD7 // Driver4
- #define E1_STEP_PIN PD6
- #define E1_DIR_PIN PD5
- #ifndef E1_CS_PIN
- #define E1_CS_PIN PD4
- #endif
-
- #define E2_ENABLE_PIN PD3 // Driver5
- #define E2_STEP_PIN PD2
- #define E2_DIR_PIN PD1
- #ifndef E2_CS_PIN
- #define E2_CS_PIN PD0
- #endif
-
- #define E3_ENABLE_PIN PC8 // Driver6
- #define E3_STEP_PIN PC7
- #define E3_DIR_PIN PC6
- #ifndef E3_CS_PIN
- #define E3_CS_PIN PD15
- #endif
-
- #define E4_STEP_PIN PD13 // Driver7
- #define E4_DIR_PIN PD12
- #ifndef E4_CS_PIN
- #define E4_CS_PIN PD11
- #endif
-
- //
- // Software SPI pins for TMC2130 stepper drivers
- // This board only supports SW SPI for stepper drivers
- //
- #if HAS_TMC_SPI
- #define TMC_USE_SW_SPI
- #endif
- #if ENABLED(TMC_USE_SW_SPI)
- #if !defined(TMC_SW_MOSI) || TMC_SW_MOSI == -1
- #define TMC_SW_MOSI PE14
- #endif
- #if !defined(TMC_SW_MISO) || TMC_SW_MISO == -1
- #define TMC_SW_MISO PE13
- #endif
- #if !defined(TMC_SW_SCK) || TMC_SW_SCK == -1
- #define TMC_SW_SCK PE12
- #endif
- #endif
-
- #if HAS_TMC_UART
- //
- // Software serial
- // No Hardware serial for steppers
- //
- #define X_SERIAL_TX_PIN PE6
- #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
-
- #define Y_SERIAL_TX_PIN PE3
- #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
-
- #define Z_SERIAL_TX_PIN PB7
- #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
-
- #define E0_SERIAL_TX_PIN PB3
- #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
-
- #define E1_SERIAL_TX_PIN PD4
- #define E1_SERIAL_RX_PIN E1_SERIAL_TX_PIN
-
- #define E2_SERIAL_TX_PIN PD0
- #define E2_SERIAL_RX_PIN E2_SERIAL_TX_PIN
-
- #define E3_SERIAL_TX_PIN PD15
- #define E3_SERIAL_RX_PIN E3_SERIAL_TX_PIN
-
- #define E4_SERIAL_TX_PIN PD11
- #define E4_SERIAL_RX_PIN E4_SERIAL_TX_PIN
-
- // Reduce baud rate to improve software serial reliability
- #define TMC_BAUD_RATE 19200
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PC1 // TH0
- #define TEMP_1_PIN PC2 // TH1
- #define TEMP_2_PIN PC3 // TH2
- #define TEMP_BED_PIN PC0 // TB
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PB1 // HE0
- #define HEATER_1_PIN PB0 // HE1
- #define HEATER_2_PIN PA3 // HE2
- #define HEATER_BED_PIN PB10 // H-BED
-
- #define FAN_PIN PA2 // FAN0
- #define FAN1_PIN PA1 // FAN1
- #define FAN2_PIN PA0 // FAN2
-
- //
- // Power Supply Control
- //
- #if ENABLED(MKS_PWC)
- #define PS_ON_PIN PW_OFF
- #define KILL_PIN PW_DET
- #define KILL_PIN_STATE HIGH
- #endif
-
- // Random Info
- #define USB_SERIAL -1 // USB Serial
-
- /**
- * ------ ------
- * (BEEPER) PB2 | 1 2 | PE10 (BTN_ENC) (SPI1 MISO) PA6 | 1 2 | PA5 (SPI1 SCK)
- * (LCD_EN) PE11 | 3 4 | PD10 (LCD_RS) (BTN_EN1) PE9 | 3 4 | PA4 (SPI1 CS)
- * (LCD_D4) PD9 5 6 | PD8 (LCD_D5) (BTN_EN2) PE8 5 6 | PA7 (SPI1 MOSI)
- * (LCD_D6) PE15 | 7 8 | PE7 (LCD_D7) (SPI1_RS) PB11 | 7 8 | RESET
- * GND | 9 10 | 5V GND | 9 10 | 3.3V
- * ------ ------
- * EXP1 EXP2
- */
- #define EXP1_01_PIN PB2
- #define EXP1_02_PIN PE10
- #define EXP1_03_PIN PE11
- #define EXP1_04_PIN PD10
- #define EXP1_05_PIN PD9
- #define EXP1_06_PIN PD8
- #define EXP1_07_PIN PE15
- #define EXP1_08_PIN PE7
-
- #define EXP2_01_PIN PA6
- #define EXP2_02_PIN PA5
- #define EXP2_03_PIN PE9
- #define EXP2_04_PIN PA4
- #define EXP2_05_PIN PE8
- #define EXP2_06_PIN PA7
- #define EXP2_07_PIN PB11
- #define EXP2_08_PIN -1 // RESET
-
- #if ENABLED(SDSUPPORT)
- #ifndef SDCARD_CONNECTION
- #define SDCARD_CONNECTION ONBOARD
- #endif
- #if SD_CONNECTION_IS(ONBOARD)
- #define ENABLE_SPI3
- #define SD_SS_PIN -1
- #define SDSS PC9
- #define SD_SCK_PIN PC10
- #define SD_MISO_PIN PC11
- #define SD_MOSI_PIN PC12
- #define SD_DETECT_PIN PC4 // SD_DETECT_PIN doesn't work with NO_SD_HOST_DRIVE disabled
- #elif SD_CONNECTION_IS(LCD)
- #define ENABLE_SPI1
- #define SDSS EXP2_04_PIN
- #define SD_SCK_PIN EXP2_02_PIN
- #define SD_MISO_PIN EXP2_01_PIN
- #define SD_MOSI_PIN EXP2_06_PIN
- #define SD_DETECT_PIN EXP2_07_PIN
- #endif
- #endif
-
- #if EITHER(TFT_COLOR_UI, TFT_CLASSIC_UI)
- #define TFT_CS_PIN EXP1_07_PIN
- #define TFT_SCK_PIN EXP2_02_PIN
- #define TFT_MISO_PIN EXP2_01_PIN
- #define TFT_MOSI_PIN EXP2_06_PIN
- #define TFT_DC_PIN EXP1_08_PIN
- #define TFT_A0_PIN TFT_DC_PIN
-
- #define TFT_RESET_PIN EXP1_04_PIN
-
- #define LCD_BACKLIGHT_PIN EXP1_03_PIN
- #define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
-
- #define TOUCH_BUTTONS_HW_SPI
- #define TOUCH_BUTTONS_HW_SPI_DEVICE 1
-
- #ifndef TFT_WIDTH
- #define TFT_WIDTH 480
- #endif
- #ifndef TFT_HEIGHT
- #define TFT_HEIGHT 320
- #endif
-
- #define TOUCH_CS_PIN EXP1_05_PIN // SPI1_NSS
- #define TOUCH_SCK_PIN EXP2_02_PIN // SPI1_SCK
- #define TOUCH_MISO_PIN EXP2_01_PIN // SPI1_MISO
- #define TOUCH_MOSI_PIN EXP2_06_PIN // SPI1_MOSI
-
- #define LCD_READ_ID 0xD3
- #define LCD_USE_DMA_SPI
-
- #define TFT_BUFFER_SIZE 14400
-
- #ifndef TOUCH_CALIBRATION_X
- #define TOUCH_CALIBRATION_X -17253
- #endif
- #ifndef TOUCH_CALIBRATION_Y
- #define TOUCH_CALIBRATION_Y 11579
- #endif
- #ifndef TOUCH_OFFSET_X
- #define TOUCH_OFFSET_X 514
- #endif
- #ifndef TOUCH_OFFSET_Y
- #define TOUCH_OFFSET_Y -24
- #endif
- #ifndef TOUCH_ORIENTATION
- #define TOUCH_ORIENTATION TOUCH_LANDSCAPE
- #endif
-
- #elif HAS_WIRED_LCD
-
- #define LCD_PINS_ENABLE EXP1_03_PIN
- #define LCD_PINS_RS EXP1_04_PIN
- #define LCD_BACKLIGHT_PIN -1
-
- // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
- #if ENABLED(MKS_MINI_12864)
-
- #define ENABLE_SPI1
- #define FORCE_SOFT_SPI
- #define DOGLCD_A0 EXP1_07_PIN
- #define DOGLCD_CS EXP1_06_PIN
- #define DOGLCD_SCK EXP2_02_PIN
- #define DOGLCD_MOSI EXP2_06_PIN
- //#define LCD_BACKLIGHT_PIN -1
- //#define LCD_RESET_PIN -1
-
- #elif ENABLED(FYSETC_MINI_12864_2_1)
-
- #define LCD_PINS_DC EXP1_04_PIN
- #define DOGLCD_CS EXP1_03_PIN
- #define DOGLCD_A0 LCD_PINS_DC
- #define LCD_BACKLIGHT_PIN -1
- #define LCD_RESET_PIN EXP1_05_PIN
- #define NEOPIXEL_PIN EXP1_06_PIN
- #define DOGLCD_MOSI EXP2_06_PIN
- #define DOGLCD_SCK EXP2_02_PIN
- #if SD_CONNECTION_IS(ONBOARD)
- #define FORCE_SOFT_SPI
- #endif
- //#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
-
- #else
-
- #define LCD_PINS_D4 EXP1_05_PIN
- #if ENABLED(ULTIPANEL)
- #define LCD_PINS_D5 EXP1_06_PIN
- #define LCD_PINS_D6 EXP1_07_PIN
- #define LCD_PINS_D7 EXP1_08_PIN
- #endif
-
- #define BOARD_ST7920_DELAY_1 96
- #define BOARD_ST7920_DELAY_2 48
- #define BOARD_ST7920_DELAY_3 600
-
- #endif // !MKS_MINI_12864
-
- #endif // HAS_WIRED_LCD
-
- #if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI, HAS_WIRED_LCD)
- #define BEEPER_PIN EXP1_01_PIN
- #define BTN_EN1 EXP2_03_PIN
- #define BTN_EN2 EXP2_05_PIN
- #define BTN_ENC EXP1_02_PIN
- #endif
|