123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Pin assignments for the MKS RUMBA32
- *
- * https://github.com/makerbase-mks/MKS-RUMBA32
- *
- * The MKS and Aus3D versions have the same pinout but the MKS version
- * has some added resistors and LEDs. The resistors needed for the
- * TMC2208/9 UART interface are among the additions. Also added were
- * connectors and resistors dedicated to the TMC2130 sensorless homing
- * interface.
- */
-
- #define BOARD_INFO_NAME "MKS RUMBA32"
-
- #if NO_EEPROM_SELECTED
- #define FLASH_EEPROM_EMULATION
- #define MARLIN_EEPROM_SIZE 0x1000 // 4K
- #endif
-
- #if ENABLED(FLASH_EEPROM_EMULATION)
- // Decrease delays and flash wear by spreading writes across the
- // 128 kB sector allocated for EEPROM emulation.
- #define FLASH_EEPROM_LEVELING
- #endif
-
- #include "pins_RUMBA32_common.h"
-
- #if HAS_TMC_UART
- /**
- * TMC2208/TMC2209 stepper drivers
- *
- * Hardware serial communication ports.
- * If undefined software serial is used according to the pins below
- */
- //#define X_HARDWARE_SERIAL Serial1
- //#define X2_HARDWARE_SERIAL Serial1
- //#define Y_HARDWARE_SERIAL Serial1
- //#define Y2_HARDWARE_SERIAL Serial1
- //#define Z_HARDWARE_SERIAL Serial1
- //#define Z2_HARDWARE_SERIAL Serial1
- //#define E0_HARDWARE_SERIAL Serial1
- //#define E1_HARDWARE_SERIAL Serial1
- //#define E2_HARDWARE_SERIAL Serial1
- //#define E3_HARDWARE_SERIAL Serial1
- //#define E4_HARDWARE_SERIAL Serial1
-
- #define X_SERIAL_TX_PIN PA3
- #define X_SERIAL_RX_PIN PC14
-
- #define Y_SERIAL_TX_PIN PA4
- #define Y_SERIAL_RX_PIN PE4
-
- #define Z_SERIAL_TX_PIN PD13
- #define Z_SERIAL_RX_PIN PE0
-
- #define E0_SERIAL_TX_PIN PD14
- #define E0_SERIAL_RX_PIN PC13
-
- #define E1_SERIAL_TX_PIN PD15
- #define E1_SERIAL_RX_PIN PD5
-
- #define E2_SERIAL_TX_PIN PD12
- #define E2_SERIAL_RX_PIN PD1
- #endif
|