My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

Makefile 16KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514
  1. # Sprinter Arduino Project Makefile
  2. #
  3. # Makefile Based on:
  4. # Arduino 0011 Makefile
  5. # Arduino adaptation by mellis, eighthave, oli.keller
  6. # Marlin adaption by Daid
  7. #
  8. # This has been tested with Arduino 0022.
  9. #
  10. # This makefile allows you to build sketches from the command line
  11. # without the Arduino environment (or Java).
  12. #
  13. # Detailed instructions for using the makefile:
  14. #
  15. # 1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that
  16. # contains the Arduino installation (for example, under Mac OS X, this
  17. # might be /Applications/Arduino.app/Contents/Resources/Java).
  18. #
  19. # 2. Modify the line containing "UPLOAD_PORT" to refer to the filename
  20. # representing the USB or serial connection to your Arduino board
  21. # (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file
  22. # changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
  23. #
  24. # 3. Set the line containing "MCU" to match your board's processor.
  25. # Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
  26. # or Diecimila have the atmega168. If you're using a LilyPad Arduino,
  27. # change F_CPU to 8000000. If you are using Gen7 electronics, you
  28. # probably need to use 20000000. Either way, you must regenerate
  29. # the speed lookup table with create_speed_lookuptable.py.
  30. #
  31. # 4. Type "make" and press enter to compile/verify your program.
  32. #
  33. # 5. Type "make upload", reset your Arduino board, and press enter to
  34. # upload your program to the Arduino board.
  35. #
  36. # Note that all settings are set with ?=, this means you can override them
  37. # from the commandline with "make HARDWARE_MOTHERBOARD=71" for example
  38. # This defined the board you are compiling for (see boards.h for the options)
  39. HARDWARE_MOTHERBOARD ?= 11
  40. # Arduino source install directory, and version number
  41. # On most linuxes this will be /usr/share/arduino
  42. ARDUINO_INSTALL_DIR ?= /usr/share/arduino
  43. ARDUINO_VERSION ?= 105
  44. # You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
  45. AVR_TOOLS_PATH ?=
  46. #Programmer configuration
  47. UPLOAD_RATE ?= 115200
  48. AVRDUDE_PROGRAMMER ?= wiring
  49. # on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
  50. UPLOAD_PORT ?= /dev/arduino
  51. #Directory used to build files in, contains all the build files, from object files to the final hex file
  52. #on linux it is best to put an absolute path like /home/username/tmp .
  53. BUILD_DIR ?= applet
  54. # This defines whether Liquid_TWI2 support will be built
  55. LIQUID_TWI2 ?= 0
  56. # this defines if Wire is needed
  57. WIRE ?= 0
  58. ############################################################################
  59. # Below here nothing should be changed...
  60. # Here the Arduino variant is selected by the board type
  61. # HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
  62. # MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
  63. #Gen7
  64. ifeq ($(HARDWARE_MOTHERBOARD),10)
  65. HARDWARE_VARIANT ?= Gen7
  66. MCU ?= atmega644
  67. F_CPU ?= 20000000
  68. else ifeq ($(HARDWARE_MOTHERBOARD),11)
  69. HARDWARE_VARIANT ?= Gen7
  70. MCU ?= atmega644p
  71. F_CPU ?= 20000000
  72. else ifeq ($(HARDWARE_MOTHERBOARD),12)
  73. HARDWARE_VARIANT ?= Gen7
  74. MCU ?= atmega644p
  75. F_CPU ?= 20000000
  76. else ifeq ($(HARDWARE_MOTHERBOARD),13)
  77. HARDWARE_VARIANT ?= Gen7
  78. MCU ?= atmega1284p
  79. F_CPU ?= 20000000
  80. #RAMPS
  81. else ifeq ($(HARDWARE_MOTHERBOARD),3)
  82. HARDWARE_VARIANT ?= arduino
  83. MCU ?= atmega2560
  84. else ifeq ($(HARDWARE_MOTHERBOARD),33)
  85. HARDWARE_VARIANT ?= arduino
  86. MCU ?= atmega2560
  87. else ifeq ($(HARDWARE_MOTHERBOARD),34)
  88. HARDWARE_VARIANT ?= arduino
  89. MCU ?= atmega2560
  90. else ifeq ($(HARDWARE_MOTHERBOARD),35)
  91. HARDWARE_VARIANT ?= arduino
  92. MCU ?= atmega2560
  93. else ifeq ($(HARDWARE_MOTHERBOARD),36)
  94. HARDWARE_VARIANT ?= arduino
  95. MCU ?= atmega2560
  96. else ifeq ($(HARDWARE_MOTHERBOARD),38)
  97. HARDWARE_VARIANT ?= arduino
  98. MCU ?= atmega2560
  99. else ifeq ($(HARDWARE_MOTHERBOARD),43)
  100. HARDWARE_VARIANT ?= arduino
  101. MCU ?= atmega2560
  102. else ifeq ($(HARDWARE_MOTHERBOARD),44)
  103. HARDWARE_VARIANT ?= arduino
  104. MCU ?= atmega2560
  105. else ifeq ($(HARDWARE_MOTHERBOARD),45)
  106. HARDWARE_VARIANT ?= arduino
  107. MCU ?= atmega2560
  108. else ifeq ($(HARDWARE_MOTHERBOARD),46)
  109. HARDWARE_VARIANT ?= arduino
  110. MCU ?= atmega2560
  111. else ifeq ($(HARDWARE_MOTHERBOARD),48)
  112. HARDWARE_VARIANT ?= arduino
  113. MCU ?= atmega2560
  114. #Gen6
  115. else ifeq ($(HARDWARE_MOTHERBOARD),5)
  116. HARDWARE_VARIANT ?= Gen6
  117. MCU ?= atmega644p
  118. else ifeq ($(HARDWARE_MOTHERBOARD),51)
  119. HARDWARE_VARIANT ?= Gen6
  120. MCU ?= atmega644p
  121. #Sanguinololu
  122. else ifeq ($(HARDWARE_MOTHERBOARD),6)
  123. HARDWARE_VARIANT ?= Sanguino
  124. MCU ?= atmega644p
  125. else ifeq ($(HARDWARE_MOTHERBOARD),62)
  126. HARDWARE_VARIANT ?= Sanguino
  127. MCU ?= atmega644p
  128. else ifeq ($(HARDWARE_MOTHERBOARD),63)
  129. HARDWARE_VARIANT ?= Sanguino
  130. MCU ?= atmega644p
  131. else ifeq ($(HARDWARE_MOTHERBOARD),65)
  132. HARDWARE_VARIANT ?= Sanguino
  133. MCU ?= atmega1284p
  134. else ifeq ($(HARDWARE_MOTHERBOARD),66)
  135. HARDWARE_VARIANT ?= Sanguino
  136. MCU ?= atmega1284p
  137. #Ultimaker
  138. else ifeq ($(HARDWARE_MOTHERBOARD),7)
  139. HARDWARE_VARIANT ?= arduino
  140. MCU ?= atmega2560
  141. else ifeq ($(HARDWARE_MOTHERBOARD),71)
  142. HARDWARE_VARIANT ?= arduino
  143. MCU ?= atmega1280
  144. #Teensylu
  145. else ifeq ($(HARDWARE_MOTHERBOARD),8)
  146. HARDWARE_VARIANT ?= Teensy
  147. MCU ?= at90usb1286
  148. else ifeq ($(HARDWARE_MOTHERBOARD),81)
  149. HARDWARE_VARIANT ?= Teensy
  150. MCU ?= at90usb1286
  151. else ifeq ($(HARDWARE_MOTHERBOARD),811)
  152. HARDWARE_VARIANT ?= Teensy
  153. MCU ?= at90usb1286
  154. else ifeq ($(HARDWARE_MOTHERBOARD),82)
  155. HARDWARE_VARIANT ?= Teensy
  156. MCU ?= at90usb646
  157. else ifeq ($(HARDWARE_MOTHERBOARD),83)
  158. HARDWARE_VARIANT ?= Teensy
  159. MCU ?= at90usb1286
  160. else ifeq ($(HARDWARE_MOTHERBOARD),84)
  161. HARDWARE_VARIANT ?= Teensy
  162. MCU ?= at90usb1286
  163. #Gen3+
  164. else ifeq ($(HARDWARE_MOTHERBOARD),9)
  165. HARDWARE_VARIANT ?= Sanguino
  166. MCU ?= atmega644p
  167. #Gen3 Monolithic Electronics
  168. else ifeq ($(HARDWARE_MOTHERBOARD),22)
  169. HARDWARE_VARIANT ?= Sanguino
  170. MCU ?= atmega644p
  171. #Megatronics
  172. else ifeq ($(HARDWARE_MOTHERBOARD),70)
  173. HARDWARE_VARIANT ?= arduino
  174. MCU ?= atmega2560
  175. #Alpha OMCA board
  176. else ifeq ($(HARDWARE_MOTHERBOARD),90)
  177. HARDWARE_VARIANT ?= SanguinoA
  178. MCU ?= atmega644
  179. #Final OMCA board
  180. else ifeq ($(HARDWARE_MOTHERBOARD),91)
  181. HARDWARE_VARIANT ?= Sanguino
  182. MCU ?= atmega644p
  183. #Rambo
  184. else ifeq ($(HARDWARE_MOTHERBOARD),301)
  185. HARDWARE_VARIANT ?= arduino
  186. MCU ?= atmega2560
  187. # Azteeg
  188. else ifeq ($(HARDWARE_MOTHERBOARD),67)
  189. HARDWARE_VARIANT ?= arduino
  190. MCU ?= atmega2560
  191. else ifeq ($(HARDWARE_MOTHERBOARD),68)
  192. HARDWARE_VARIANT ?= arduino
  193. MCU ?= atmega2560
  194. endif
  195. # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
  196. # if you are setting this to something other than 16MHz
  197. # Set to 16Mhz if not yet set.
  198. F_CPU ?= 16000000
  199. # Arduino contained the main source code for the Arduino
  200. # Libraries, the "hardware variant" are for boards
  201. # that derives from that, and their source are present in
  202. # the main Marlin source directory
  203. ifeq ($(HARDWARE_VARIANT), arduino)
  204. HARDWARE_DIR = $(ARDUINO_INSTALL_DIR)/hardware
  205. else
  206. ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
  207. HARDWARE_DIR = ../ArduinoAddons/Arduino_1.x.x
  208. else
  209. HARDWARE_DIR = ../ArduinoAddons/Arduino_0.xx
  210. endif
  211. endif
  212. HARDWARE_SRC = $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/cores/arduino
  213. TARGET = $(notdir $(CURDIR))
  214. # VPATH tells make to look into these directory for source files,
  215. # there is no need to specify explicit pathnames as long as the
  216. # directory is added here
  217. VPATH = .
  218. VPATH += $(BUILD_DIR)
  219. VPATH += $(HARDWARE_SRC)
  220. ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy))
  221. VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal
  222. VPATH += $(ARDUINO_INSTALL_DIR)/libraries/SPI
  223. ifeq ($(LIQUID_TWI2), 1)
  224. VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
  225. VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
  226. VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
  227. endif
  228. ifeq ($(WIRE), 1)
  229. VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
  230. VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
  231. endif
  232. else
  233. VPATH += $(HARDWARE_DIR)/libraries/LiquidCrystal
  234. VPATH += $(HARDWARE_DIR)/libraries/SPI
  235. ifeq ($(LIQUID_TWI2), 1)
  236. VPATH += $(HARDWARE_DIR)/libraries/Wire
  237. VPATH += $(HARDWARE_DIR)/libraries/Wire/utility
  238. VPATH += $(HARDWARE_DIR)/libraries/LiquidTWI2
  239. endif
  240. ifeq ($(WIRE), 1)
  241. VPATH += $(HARDWARE_DIR)/libraries/Wire
  242. VPATH += $(HARDWARE_DIR)/libraries/Wire/utility
  243. endif
  244. endif
  245. ifeq ($(HARDWARE_VARIANT), arduino)
  246. HARDWARE_SUB_VARIANT ?= mega
  247. VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/variants/$(HARDWARE_SUB_VARIANT)
  248. else
  249. HARDWARE_SUB_VARIANT ?= standard
  250. VPATH += $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
  251. endif
  252. SRC = wiring.c \
  253. wiring_analog.c wiring_digital.c \
  254. wiring_pulse.c \
  255. wiring_shift.c WInterrupts.c
  256. ifeq ($(HARDWARE_VARIANT), Teensy)
  257. SRC = wiring.c
  258. VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
  259. endif
  260. CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
  261. MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \
  262. SdFile.cpp SdVolume.cpp planner.cpp stepper.cpp \
  263. temperature.cpp cardreader.cpp configuration_store.cpp \
  264. watchdog.cpp SPI.cpp servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \
  265. dac_mcp4728.cpp vector_3.cpp qr_solve.cpp buzzer.cpp
  266. ifeq ($(LIQUID_TWI2), 0)
  267. CXXSRC += LiquidCrystal.cpp
  268. else
  269. SRC += twi.c
  270. CXXSRC += Wire.cpp LiquidTWI2.cpp
  271. endif
  272. ifeq ($(WIRE), 1)
  273. SRC += twi.c
  274. CXXSRC += Wire.cpp
  275. endif
  276. #Check for Arduino 1.0.0 or higher and use the correct source files for that version
  277. ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
  278. CXXSRC += main.cpp
  279. else
  280. SRC += pins_arduino.c main.c
  281. endif
  282. FORMAT = ihex
  283. # Name of this Makefile (used for "make depend").
  284. MAKEFILE = Makefile
  285. # Debugging format.
  286. # Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
  287. # AVR (extended) COFF requires stabs, plus an avr-objcopy run.
  288. DEBUG = stabs
  289. OPT = s
  290. DEFINES ?=
  291. # Program settings
  292. CC = $(AVR_TOOLS_PATH)avr-gcc
  293. CXX = $(AVR_TOOLS_PATH)avr-g++
  294. OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy
  295. OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump
  296. AR = $(AVR_TOOLS_PATH)avr-ar
  297. SIZE = $(AVR_TOOLS_PATH)avr-size
  298. NM = $(AVR_TOOLS_PATH)avr-nm
  299. AVRDUDE = avrdude
  300. REMOVE = rm -f
  301. MV = mv -f
  302. # Place -D or -U options here
  303. CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)}
  304. CXXDEFS = $(CDEFS)
  305. ifeq ($(HARDWARE_VARIANT), Teensy)
  306. CDEFS += -DUSB_SERIAL
  307. SRC += usb.c pins_teensy.c
  308. CXXSRC += usb_api.cpp
  309. endif
  310. # Add all the source directories as include directories too
  311. CINCS = ${addprefix -I ,${VPATH}}
  312. CXXINCS = ${addprefix -I ,${VPATH}}
  313. # Compiler flag to set the C Standard level.
  314. # c89 - "ANSI" C
  315. # gnu89 - c89 plus GCC extensions
  316. # c99 - ISO C99 standard (not yet fully implemented)
  317. # gnu99 - c99 plus GCC extensions
  318. #CSTANDARD = -std=gnu99
  319. CDEBUG = -g$(DEBUG)
  320. CWARN = -Wall -Wstrict-prototypes
  321. CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \
  322. -fshort-enums -w -ffunction-sections -fdata-sections \
  323. -DARDUINO=$(ARDUINO_VERSION)
  324. ifneq ($(HARDWARE_MOTHERBOARD),)
  325. CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
  326. endif
  327. #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
  328. CEXTRA = -fno-use-cxa-atexit
  329. CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING)
  330. CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING)
  331. #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
  332. LDFLAGS = -lm
  333. # Programming support using avrdude. Settings and variables.
  334. AVRDUDE_PORT = $(UPLOAD_PORT)
  335. AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
  336. ifeq ($(shell uname -s), Linux)
  337. AVRDUDE_CONF = /etc/avrdude/avrdude.conf
  338. else
  339. AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
  340. endif
  341. AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
  342. -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
  343. -b$(UPLOAD_RATE)
  344. # Define all object files.
  345. OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
  346. OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
  347. OBJ += ${patsubst %.S, $(BUILD_DIR)/%.o, ${ASRC}}
  348. # Define all listing files.
  349. LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
  350. # Combine all necessary flags and optional flags.
  351. # Add target processor to flags.
  352. ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
  353. ALL_CXXFLAGS = -mmcu=$(MCU) $(CXXFLAGS)
  354. ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS)
  355. # set V=1 (eg, "make V=1") to print the full commands etc.
  356. ifneq ($V,1)
  357. Pecho=@echo
  358. P=@
  359. else
  360. Pecho=@:
  361. P=
  362. endif
  363. # Default target.
  364. all: sizeafter
  365. build: $(BUILD_DIR) elf hex
  366. # Creates the object directory
  367. $(BUILD_DIR):
  368. $P mkdir -p $(BUILD_DIR)
  369. elf: $(BUILD_DIR)/$(TARGET).elf
  370. hex: $(BUILD_DIR)/$(TARGET).hex
  371. eep: $(BUILD_DIR)/$(TARGET).eep
  372. lss: $(BUILD_DIR)/$(TARGET).lss
  373. sym: $(BUILD_DIR)/$(TARGET).sym
  374. # Program the device.
  375. # Do not try to reset an Arduino if it's not one
  376. upload: $(BUILD_DIR)/$(TARGET).hex
  377. ifeq (${AVRDUDE_PROGRAMMER}, arduino)
  378. stty hup < $(UPLOAD_PORT); true
  379. endif
  380. $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
  381. ifeq (${AVRDUDE_PROGRAMMER}, arduino)
  382. stty -hup < $(UPLOAD_PORT); true
  383. endif
  384. # Display size of file.
  385. HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
  386. ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(BUILD_DIR)/$(TARGET).elf; \
  387. $(SIZE) $(BUILD_DIR)/$(TARGET).elf
  388. sizebefore:
  389. $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
  390. sizeafter: build
  391. $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
  392. # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
  393. COFFCONVERT=$(OBJCOPY) --debugging \
  394. --change-section-address .data-0x800000 \
  395. --change-section-address .bss-0x800000 \
  396. --change-section-address .noinit-0x800000 \
  397. --change-section-address .eeprom-0x810000
  398. coff: $(BUILD_DIR)/$(TARGET).elf
  399. $(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
  400. extcoff: $(TARGET).elf
  401. $(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
  402. .SUFFIXES: .elf .hex .eep .lss .sym
  403. .PRECIOUS: .o
  404. .elf.hex:
  405. $(Pecho) " COPY $@"
  406. $P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
  407. .elf.eep:
  408. -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
  409. --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
  410. # Create extended listing file from ELF output file.
  411. .elf.lss:
  412. $(OBJDUMP) -h -S $< > $@
  413. # Create a symbol table from ELF output file.
  414. .elf.sym:
  415. $(NM) -n $< > $@
  416. # Link: create ELF output file from library.
  417. $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
  418. $(Pecho) " CXX $@"
  419. $P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ -L. $(OBJ) $(LDFLAGS)
  420. $(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
  421. $(Pecho) " CC $<"
  422. $P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
  423. $(BUILD_DIR)/%.o: $(BUILD_DIR)/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
  424. $(Pecho) " CXX $<"
  425. $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
  426. $(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
  427. $(Pecho) " CXX $<"
  428. $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
  429. # Target: clean project.
  430. clean:
  431. $(Pecho) " RM $(BUILD_DIR)/*"
  432. $P $(REMOVE) $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET).cof $(BUILD_DIR)/$(TARGET).elf \
  433. $(BUILD_DIR)/$(TARGET).map $(BUILD_DIR)/$(TARGET).sym $(BUILD_DIR)/$(TARGET).lss $(BUILD_DIR)/$(TARGET).cpp \
  434. $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
  435. $(Pecho) " RMDIR $(BUILD_DIR)/"
  436. $P rm -rf $(BUILD_DIR)
  437. .PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
  438. # Automaticaly include the dependency files created by gcc
  439. -include ${wildcard $(BUILD_DIR)/*.d}