My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

pins_GEN3_MONOLITHIC.h 2.1KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Gen3 Monolithic Electronics pin assignments
  24. */
  25. #ifndef __AVR_ATmega644P__
  26. #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
  27. #endif
  28. #define DEBUG_PIN 0
  29. // x axis
  30. #define X_STEP_PIN 15
  31. #define X_DIR_PIN 18
  32. #define X_MIN_PIN 20
  33. // Alex Checar #define X_STOP_PIN 20
  34. #define X_ENABLE_PIN 24 // actually uses Y_enable_pin
  35. #define X_MAX_PIN -1
  36. // y axis
  37. #define Y_STEP_PIN 23
  38. #define Y_DIR_PIN 22
  39. #define Y_MIN_PIN 25
  40. // Alex Checar #define Y_STOP_PIN 25
  41. #define Y_ENABLE_PIN 24 // shared with X_enable_pin
  42. #define Y_MAX_PIN -1
  43. // z axis
  44. #define Z_STEP_PIN 27
  45. #define Z_DIR_PIN 28
  46. #define Z_MIN_PIN 30
  47. // Alex Checar #define Z_STOP_PIN 30
  48. #define Z_ENABLE_PIN 29
  49. #define Z_MAX_PIN -1
  50. // extruder pins
  51. #define E0_STEP_PIN 12
  52. #define E0_DIR_PIN 17
  53. #define E0_ENABLE_PIN 3
  54. #define HEATER_0_PIN 16
  55. #define TEMP_0_PIN 0
  56. #define FAN_PIN -1
  57. // bed pins
  58. #define HEATER_BED_PIN -1
  59. #define TEMP_BED_PIN -1
  60. #define SDSS -1
  61. #define SDPOWER -1
  62. #define LED_PIN -1
  63. // pin for controlling the PSU.
  64. #define PS_ON_PIN 14 // Alex, Do this work on the card?
  65. // Alex extras from Gen3+
  66. #define KILL_PIN -1
  67. #define TEMP_1_PIN -1
  68. #define TEMP_2_PIN -1
  69. #define HEATER_2_PIN -1