My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

pins_GEN6.h 2.6KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Gen6 pin assignments
  24. */
  25. #ifndef __AVR_ATmega644P__
  26. #ifndef __AVR_ATmega1284P__
  27. #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
  28. #endif
  29. #endif
  30. //x axis pins
  31. #define X_STEP_PIN 15
  32. #define X_DIR_PIN 18
  33. #define X_ENABLE_PIN 19
  34. #define X_STOP_PIN 20
  35. //y axis pins
  36. #define Y_STEP_PIN 23
  37. #define Y_DIR_PIN 22
  38. #define Y_ENABLE_PIN 24
  39. #define Y_STOP_PIN 25
  40. //z axis pins
  41. #define Z_STEP_PIN 27
  42. #define Z_DIR_PIN 28
  43. #define Z_ENABLE_PIN 29
  44. #define Z_STOP_PIN 30
  45. //extruder pins
  46. #define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
  47. #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
  48. #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
  49. #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
  50. #define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
  51. #define TEMP_2_PIN -1 //changed @ rkoeppl 20110410
  52. #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
  53. #define HEATER_1_PIN -1
  54. #define HEATER_2_PIN -1
  55. #if MB(GEN6)
  56. #define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
  57. #define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
  58. #else
  59. #define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
  60. #define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
  61. #endif
  62. #define SDPOWER -1
  63. #define SDSS 17
  64. #define LED_PIN -1 //changed @ rkoeppl 20110410
  65. #define FAN_PIN -1 //changed @ rkoeppl 20110410
  66. #define PS_ON_PIN -1 //changed @ rkoeppl 20110410
  67. #define KILL_PIN -1 //changed @ drakelive 20120830
  68. //our pin for debugging.
  69. #define DEBUG_PIN 0
  70. //our RS485 pins
  71. #define TX_ENABLE_PIN 12
  72. #define RX_ENABLE_PIN 13