My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Gen7 v1.4 pin assignments
  24. */
  25. #define GEN7_VERSION 14 // v1.4
  26. #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
  27. #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
  28. #endif
  29. //x axis pins
  30. #define X_STEP_PIN 29
  31. #define X_DIR_PIN 28
  32. #define X_ENABLE_PIN 25
  33. #define X_STOP_PIN 0
  34. //y axis pins
  35. #define Y_STEP_PIN 27
  36. #define Y_DIR_PIN 26
  37. #define Y_ENABLE_PIN 25
  38. #define Y_STOP_PIN 1
  39. //z axis pins
  40. #define Z_STEP_PIN 23
  41. #define Z_DIR_PIN 22
  42. #define Z_ENABLE_PIN 25
  43. #define Z_STOP_PIN 2
  44. //extruder pins
  45. #define E0_STEP_PIN 19
  46. #define E0_DIR_PIN 18
  47. #define E0_ENABLE_PIN 25
  48. #define TEMP_0_PIN 1
  49. #define TEMP_1_PIN -1
  50. #define TEMP_2_PIN -1
  51. #define TEMP_BED_PIN 0
  52. #define HEATER_0_PIN 4
  53. #define HEATER_1_PIN -1
  54. #define HEATER_2_PIN -1
  55. #define HEATER_BED_PIN 3
  56. #define KILL_PIN -1
  57. #define SDPOWER -1
  58. #define SDSS -1 // SCL pin of I2C header
  59. #define LED_PIN -1
  60. #define FAN_PIN -1
  61. #define PS_ON_PIN 15
  62. //our pin for debugging.
  63. #define DEBUG_PIN 0
  64. //our RS485 pins
  65. #define TX_ENABLE_PIN 12
  66. #define RX_ENABLE_PIN 13