My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

pins_RUMBA.h 4.6KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * RUMBA pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
  27. #endif
  28. #if EXTRUDERS > 3
  29. #error RUMBA supports up to 3 extruders. Comment this line to keep going.
  30. #endif
  31. #define DEFAULT_MACHINE_NAME "Rumba"
  32. #define X_STEP_PIN 17
  33. #define X_DIR_PIN 16
  34. #define X_ENABLE_PIN 48
  35. #define X_MIN_PIN 37
  36. #define X_MAX_PIN 36
  37. #define Y_STEP_PIN 54
  38. #define Y_DIR_PIN 47
  39. #define Y_ENABLE_PIN 55
  40. #define Y_MIN_PIN 35
  41. #define Y_MAX_PIN 34
  42. #define Z_STEP_PIN 57
  43. #define Z_DIR_PIN 56
  44. #define Z_ENABLE_PIN 62
  45. #define Z_MIN_PIN 33
  46. #define Z_MAX_PIN 32
  47. #if ENABLED(Z_MIN_PROBE_ENDSTOP)
  48. // Define a pin to use as the signal pin on Arduino for the Z probe endstop.
  49. #define Z_MIN_PROBE_PIN 33
  50. #endif
  51. #define E0_STEP_PIN 23
  52. #define E0_DIR_PIN 22
  53. #define E0_ENABLE_PIN 24
  54. #define E1_STEP_PIN 26
  55. #define E1_DIR_PIN 25
  56. #define E1_ENABLE_PIN 27
  57. #define E2_STEP_PIN 29
  58. #define E2_DIR_PIN 28
  59. #define E2_ENABLE_PIN 39
  60. #define LED_PIN 13
  61. #define FAN_PIN 7
  62. #define FAN1_PIN 8
  63. #define PS_ON_PIN 45
  64. #define KILL_PIN 46
  65. #if TEMP_SENSOR_0 == 0
  66. #define TEMP_0_PIN -1
  67. #define HEATER_0_PIN -1
  68. #else
  69. #define HEATER_0_PIN 2 // EXTRUDER 1
  70. #if TEMP_SENSOR_0 == -1
  71. #define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
  72. #else
  73. #define TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used
  74. #endif
  75. #endif
  76. #if TEMP_SENSOR_1 == 0
  77. #define TEMP_1_PIN -1
  78. #define HEATER_1_PIN -1
  79. #else
  80. #define HEATER_1_PIN 3 // EXTRUDER 2
  81. #if TEMP_SENSOR_1 == -1
  82. #define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
  83. #else
  84. #define TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used
  85. #endif
  86. #endif
  87. #if TEMP_SENSOR_2 == 0
  88. #define TEMP_2_PIN -1
  89. #define HEATER_2_PIN -1
  90. #else
  91. #define HEATER_2_PIN 6 // EXTRUDER 3
  92. #if TEMP_SENSOR_2 == -1
  93. #define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
  94. #else
  95. #define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
  96. #endif
  97. #endif
  98. //optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
  99. //optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4
  100. #if TEMP_SENSOR_BED == 0
  101. #define TEMP_BED_PIN -1
  102. #define HEATER_BED_PIN -1
  103. #else
  104. #define HEATER_BED_PIN 9 // BED
  105. #if TEMP_SENSOR_BED == -1
  106. #define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
  107. #else
  108. #define TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
  109. #endif
  110. #endif
  111. #define SDPOWER -1
  112. #define SDSS 53
  113. #define SD_DETECT_PIN 49
  114. #define BEEPER_PIN 44
  115. #define LCD_PINS_RS 19
  116. #define LCD_PINS_ENABLE 42
  117. #define LCD_PINS_D4 18
  118. #define LCD_PINS_D5 38
  119. #define LCD_PINS_D6 41
  120. #define LCD_PINS_D7 40
  121. #define BTN_EN1 11
  122. #define BTN_EN2 12
  123. #define BTN_ENC 43
  124. #define SERVO0_PIN 5