My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

pins_ULTIMAIN_2.h 2.8KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Ultiboard v2.0 pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
  27. #endif
  28. #define DEFAULT_MACHINE_NAME "Ultimaker"
  29. #define DEFAULT_SOURCE_URL "https://github.com/Ultimaker/Marlin"
  30. #define X_STEP_PIN 25
  31. #define X_DIR_PIN 23
  32. #define X_STOP_PIN 22
  33. #define X_ENABLE_PIN 27
  34. #define Y_STEP_PIN 32
  35. #define Y_DIR_PIN 33
  36. #define Y_STOP_PIN 26
  37. #define Y_ENABLE_PIN 31
  38. #define Z_STEP_PIN 35
  39. #define Z_DIR_PIN 36
  40. #define Z_STOP_PIN 29
  41. #define Z_ENABLE_PIN 34
  42. #define HEATER_BED_PIN 4
  43. #define TEMP_BED_PIN 10
  44. #define HEATER_0_PIN 2
  45. #define TEMP_0_PIN 8
  46. #define HEATER_1_PIN 3
  47. #define TEMP_1_PIN 9
  48. #define HEATER_2_PIN -1
  49. #define TEMP_2_PIN -1
  50. #define E0_STEP_PIN 42
  51. #define E0_DIR_PIN 43
  52. #define E0_ENABLE_PIN 37
  53. #define E1_STEP_PIN 49
  54. #define E1_DIR_PIN 47
  55. #define E1_ENABLE_PIN 48
  56. #define SDPOWER -1
  57. #define SDSS 53
  58. #define LED_PIN 8
  59. #define FAN_PIN 7
  60. #define PS_ON_PIN -1
  61. #define KILL_PIN -1
  62. #define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
  63. #define SAFETY_TRIGGERED_PIN 28 //PIN to detect the safety circuit has triggered
  64. #define MAIN_VOLTAGE_MEASURE_PIN 14 //Analogue PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
  65. #define MOTOR_CURRENT_PWM_XY_PIN 44
  66. #define MOTOR_CURRENT_PWM_Z_PIN 45
  67. #define MOTOR_CURRENT_PWM_E_PIN 46
  68. //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
  69. #define MOTOR_CURRENT_PWM_RANGE 2000
  70. #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
  71. #define BEEPER_PIN 18
  72. #define LCD_PINS_RS 20
  73. #define LCD_PINS_ENABLE 15
  74. #define LCD_PINS_D4 14
  75. #define LCD_PINS_D5 21
  76. #define LCD_PINS_D6 5
  77. #define LCD_PINS_D7 6
  78. //buttons are directly attached
  79. #define BTN_EN1 40
  80. #define BTN_EN2 41
  81. #define BTN_ENC 19 //the click
  82. #define BLEN_C 2
  83. #define BLEN_B 1
  84. #define BLEN_A 0
  85. #define SD_DETECT_PIN 39