My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

Configuration.h 84KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Example configuration file for OpenBeam Kossel Pro
  25. */
  26. /**
  27. * Configuration.h
  28. *
  29. * Basic settings such as:
  30. *
  31. * - Type of electronics
  32. * - Type of temperature sensor
  33. * - Printer geometry
  34. * - Endstop configuration
  35. * - LCD controller
  36. * - Extra features
  37. *
  38. * Advanced settings can be found in Configuration_adv.h
  39. *
  40. */
  41. #define CONFIGURATION_H_VERSION 020000
  42. //===========================================================================
  43. //============================= Getting Started =============================
  44. //===========================================================================
  45. /**
  46. * Here are some standard links for getting your machine calibrated:
  47. *
  48. * http://reprap.org/wiki/Calibration
  49. * http://youtu.be/wAL9d7FgInk
  50. * http://calculator.josefprusa.cz
  51. * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  52. * http://www.thingiverse.com/thing:5573
  53. * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  54. * http://www.thingiverse.com/thing:298812
  55. */
  56. //===========================================================================
  57. //============================= DELTA Printer ===============================
  58. //===========================================================================
  59. // For a Delta printer start with one of the configuration files in the
  60. // config/examples/delta directory and customize for your machine.
  61. //
  62. //===========================================================================
  63. //============================= SCARA Printer ===============================
  64. //===========================================================================
  65. // For a SCARA printer start with the configuration files in
  66. // config/examples/SCARA and customize for your machine.
  67. //
  68. // @section info
  69. // Author info of this build printed to the host during boot and M115
  70. #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
  71. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
  72. /**
  73. * *** VENDORS PLEASE READ ***
  74. *
  75. * Marlin allows you to add a custom boot image for Graphical LCDs.
  76. * With this option Marlin will first show your custom screen followed
  77. * by the standard Marlin logo with version number and web URL.
  78. *
  79. * We encourage you to take advantage of this new feature and we also
  80. * respectfully request that you retain the unmodified Marlin boot screen.
  81. */
  82. // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
  83. #define SHOW_BOOTSCREEN
  84. // Show the bitmap in Marlin/_Bootscreen.h on startup.
  85. //#define SHOW_CUSTOM_BOOTSCREEN
  86. // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
  87. //#define CUSTOM_STATUS_SCREEN_IMAGE
  88. // @section machine
  89. /**
  90. * Select the serial port on the board to use for communication with the host.
  91. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  92. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  93. *
  94. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  95. */
  96. #define SERIAL_PORT 0
  97. /**
  98. * Select a secondary serial port on the board to use for communication with the host.
  99. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  100. * Serial port -1 is the USB emulated serial port, if available.
  101. *
  102. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  103. */
  104. //#define SERIAL_PORT_2 -1
  105. /**
  106. * This setting determines the communication speed of the printer.
  107. *
  108. * 250000 works in most cases, but you might try a lower speed if
  109. * you commonly experience drop-outs during host printing.
  110. * You may try up to 1000000 to speed up SD file transfer.
  111. *
  112. * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  113. */
  114. #define BAUDRATE 115200
  115. // Enable the Bluetooth serial interface on AT90USB devices
  116. //#define BLUETOOTH
  117. // Choose the name from boards.h that matches your setup
  118. #ifndef MOTHERBOARD
  119. #define MOTHERBOARD BOARD_BRAINWAVE_PRO
  120. #endif
  121. // Name displayed in the LCD "Ready" message and Info menu
  122. #define CUSTOM_MACHINE_NAME "Kossel Pro"
  123. // Printer's unique ID, used by some programs to differentiate between machines.
  124. // Choose your own or use a service like http://www.uuidgenerator.net/version4
  125. //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
  126. // @section extruder
  127. // This defines the number of extruders
  128. // :[1, 2, 3, 4, 5, 6]
  129. #define EXTRUDERS 1
  130. // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
  131. #define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
  132. // For Cyclops or any "multi-extruder" that shares a single nozzle.
  133. //#define SINGLENOZZLE
  134. /**
  135. * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
  136. *
  137. * This device allows one stepper driver on a control board to drive
  138. * two to eight stepper motors, one at a time, in a manner suitable
  139. * for extruders.
  140. *
  141. * This option only allows the multiplexer to switch on tool-change.
  142. * Additional options to configure custom E moves are pending.
  143. */
  144. //#define MK2_MULTIPLEXER
  145. #if ENABLED(MK2_MULTIPLEXER)
  146. // Override the default DIO selector pins here, if needed.
  147. // Some pins files may provide defaults for these pins.
  148. //#define E_MUX0_PIN 40 // Always Required
  149. //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
  150. //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
  151. #endif
  152. /**
  153. * Prusa Multi-Material Unit v2
  154. *
  155. * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  156. * Requires EXTRUDERS = 5
  157. *
  158. * For additional configuration see Configuration_adv.h
  159. */
  160. //#define PRUSA_MMU2
  161. // A dual extruder that uses a single stepper motor
  162. //#define SWITCHING_EXTRUDER
  163. #if ENABLED(SWITCHING_EXTRUDER)
  164. #define SWITCHING_EXTRUDER_SERVO_NR 0
  165. #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
  166. #if EXTRUDERS > 3
  167. #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
  168. #endif
  169. #endif
  170. // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
  171. //#define SWITCHING_NOZZLE
  172. #if ENABLED(SWITCHING_NOZZLE)
  173. #define SWITCHING_NOZZLE_SERVO_NR 0
  174. //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
  175. #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo)
  176. #endif
  177. /**
  178. * Two separate X-carriages with extruders that connect to a moving part
  179. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
  180. */
  181. //#define PARKING_EXTRUDER
  182. /**
  183. * Two separate X-carriages with extruders that connect to a moving part
  184. * via a magnetic docking mechanism using movements and no solenoid
  185. *
  186. * project : https://www.thingiverse.com/thing:3080893
  187. * movements : https://youtu.be/0xCEiG9VS3k
  188. * https://youtu.be/Bqbcs0CU2FE
  189. */
  190. //#define MAGNETIC_PARKING_EXTRUDER
  191. #if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  192. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
  193. #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
  194. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  195. #if ENABLED(PARKING_EXTRUDER)
  196. #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
  197. #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
  198. #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined.
  199. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  200. #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
  201. #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point
  202. #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple
  203. #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point
  204. #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling
  205. #endif
  206. #endif
  207. /**
  208. * Switching Toolhead
  209. *
  210. * Support for swappable and dockable toolheads, such as
  211. * the E3D Tool Changer. Toolheads are locked with a servo.
  212. */
  213. //#define SWITCHING_TOOLHEAD
  214. /**
  215. * Magnetic Switching Toolhead
  216. *
  217. * Support swappable and dockable toolheads with a magnetic
  218. * docking mechanism using movement and no servo.
  219. */
  220. //#define MAGNETIC_SWITCHING_TOOLHEAD
  221. /**
  222. * Electromagnetic Switching Toolhead
  223. *
  224. * Parking for CoreXY / HBot kinematics.
  225. * Toolheads are parked at one edge and held with an electromagnet.
  226. * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
  227. */
  228. //#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
  229. #if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  230. #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
  231. #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
  232. #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
  233. #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
  234. #if ENABLED(SWITCHING_TOOLHEAD)
  235. #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
  236. #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
  237. #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
  238. #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
  239. #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
  240. //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
  241. #if ENABLED(PRIME_BEFORE_REMOVE)
  242. #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
  243. #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
  244. #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
  245. #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
  246. #endif
  247. #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  248. #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
  249. #endif
  250. #endif
  251. /**
  252. * "Mixing Extruder"
  253. * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
  254. * - Extends the stepping routines to move multiple steppers in proportion to the mix.
  255. * - Optional support for Repetier Firmware's 'M164 S<index>' supporting virtual tools.
  256. * - This implementation supports up to two mixing extruders.
  257. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
  258. */
  259. //#define MIXING_EXTRUDER
  260. #if ENABLED(MIXING_EXTRUDER)
  261. #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
  262. #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
  263. //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
  264. //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD
  265. #if ENABLED(GRADIENT_MIX)
  266. //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias
  267. #endif
  268. #endif
  269. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  270. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  271. // For the other hotends it is their distance from the extruder 0 hotend.
  272. //#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
  273. //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
  274. //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
  275. // @section machine
  276. /**
  277. * Power Supply Control
  278. *
  279. * Enable and connect the power supply to the PS_ON_PIN.
  280. * Specify whether the power supply is active HIGH or active LOW.
  281. */
  282. #define PSU_CONTROL
  283. //#define PSU_NAME "Power Supply"
  284. #if ENABLED(PSU_CONTROL)
  285. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box
  286. //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80
  287. //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power
  288. //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
  289. #if ENABLED(AUTO_POWER_CONTROL)
  290. #define AUTO_POWER_FANS // Turn on PSU if fans need power
  291. #define AUTO_POWER_E_FANS
  292. #define AUTO_POWER_CONTROLLERFAN
  293. #define AUTO_POWER_CHAMBER_FAN
  294. //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
  295. //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
  296. #define POWER_TIMEOUT 30
  297. #endif
  298. #endif
  299. // @section temperature
  300. //===========================================================================
  301. //============================= Thermal Settings ============================
  302. //===========================================================================
  303. /**
  304. * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  305. *
  306. * Temperature sensors available:
  307. *
  308. * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
  309. * -3 : thermocouple with MAX31855 (only for sensors 0-1)
  310. * -2 : thermocouple with MAX6675 (only for sensors 0-1)
  311. * -4 : thermocouple with AD8495
  312. * -1 : thermocouple with AD595
  313. * 0 : not used
  314. * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  315. * 331 : (3.3V scaled thermistor 1 table)
  316. * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  317. * 3 : Mendel-parts thermistor (4.7k pullup)
  318. * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  319. * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
  320. * 501 : 100K Zonestar (Tronxy X3A) Thermistor
  321. * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  322. * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  323. * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  324. * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  325. * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  326. * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  327. * 10 : 100k RS thermistor 198-961 (4.7k pullup)
  328. * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
  329. * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  330. * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  331. * 15 : 100k thermistor calibration for JGAurora A5 hotend
  332. * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
  333. * 20 : Pt100 with circuit in the Ultimainboard V2.x
  334. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  335. * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  336. * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
  337. * 66 : 4.7M High Temperature thermistor from Dyze Design
  338. * 67 : 450C thermistor from SliceEngineering
  339. * 70 : the 100K thermistor found in the bq Hephestos 2
  340. * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
  341. * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
  342. *
  343. * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
  344. * (but gives greater accuracy and more stable PID)
  345. * 51 : 100k thermistor - EPCOS (1k pullup)
  346. * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  347. * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  348. *
  349. * 1047 : Pt1000 with 4k7 pullup
  350. * 1010 : Pt1000 with 1k pullup (non standard)
  351. * 147 : Pt100 with 4k7 pullup
  352. * 110 : Pt100 with 1k pullup (non standard)
  353. *
  354. * 1000 : Custom - Specify parameters in Configuration_adv.h
  355. *
  356. * Use these for Testing or Development purposes. NEVER for production machine.
  357. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  358. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  359. */
  360. #define TEMP_SENSOR_0 5
  361. #define TEMP_SENSOR_1 0
  362. #define TEMP_SENSOR_2 0
  363. #define TEMP_SENSOR_3 0
  364. #define TEMP_SENSOR_4 0
  365. #define TEMP_SENSOR_5 0
  366. #define TEMP_SENSOR_BED 5
  367. #define TEMP_SENSOR_CHAMBER 0
  368. // Dummy thermistor constant temperature readings, for use with 998 and 999
  369. #define DUMMY_THERMISTOR_998_VALUE 25
  370. #define DUMMY_THERMISTOR_999_VALUE 100
  371. // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
  372. // from the two sensors differ too much the print will be aborted.
  373. //#define TEMP_SENSOR_1_AS_REDUNDANT
  374. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  375. #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
  376. #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  377. #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  378. #define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190
  379. #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  380. #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  381. // Below this temperature the heater will be switched off
  382. // because it probably indicates a broken thermistor wire.
  383. #define HEATER_0_MINTEMP 5
  384. #define HEATER_1_MINTEMP 5
  385. #define HEATER_2_MINTEMP 5
  386. #define HEATER_3_MINTEMP 5
  387. #define HEATER_4_MINTEMP 5
  388. #define HEATER_5_MINTEMP 5
  389. #define BED_MINTEMP 5
  390. // Above this temperature the heater will be switched off.
  391. // This can protect components from overheating, but NOT from shorts and failures.
  392. // (Use MINTEMP for thermistor short/failure protection.)
  393. #define HEATER_0_MAXTEMP 275
  394. #define HEATER_1_MAXTEMP 275
  395. #define HEATER_2_MAXTEMP 275
  396. #define HEATER_3_MAXTEMP 275
  397. #define HEATER_4_MAXTEMP 275
  398. #define HEATER_5_MAXTEMP 275
  399. #define BED_MAXTEMP 150
  400. //===========================================================================
  401. //============================= PID Settings ================================
  402. //===========================================================================
  403. // PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
  404. // Comment the following line to disable PID and enable bang-bang.
  405. #define PIDTEMP
  406. #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
  407. #define PID_MAX 125 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  408. #define PID_K1 0.95 // Smoothing factor within any PID loop
  409. #if ENABLED(PIDTEMP)
  410. //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
  411. //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
  412. //#define PID_DEBUG // Sends debug data to the serial port.
  413. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  414. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  415. //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
  416. // Set/get with gcode: M301 E[extruder number, 0-2]
  417. #define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature
  418. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  419. // Kossel Pro
  420. #define DEFAULT_Kp 19.30
  421. #define DEFAULT_Ki 3.51
  422. #define DEFAULT_Kd 26.56
  423. #endif // PIDTEMP
  424. //===========================================================================
  425. //====================== PID > Bed Temperature Control ======================
  426. //===========================================================================
  427. /**
  428. * PID Bed Heating
  429. *
  430. * If this option is enabled set PID constants below.
  431. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
  432. *
  433. * The PID frequency will be the same as the extruder PWM.
  434. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  435. * which is fine for driving a square wave into a resistive load and does not significantly
  436. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
  437. * heater. If your configuration is significantly different than this and you don't understand
  438. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  439. */
  440. #define PIDTEMPBED
  441. //#define BED_LIMIT_SWITCHING
  442. /**
  443. * Max Bed Power
  444. * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
  445. * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  446. * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  447. */
  448. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  449. #if ENABLED(PIDTEMPBED)
  450. //#define MIN_BED_POWER 0
  451. //#define PID_BED_DEBUG // Sends debug data to the serial port.
  452. //Kossel Pro heated bed plate with borosilicate glass
  453. //from pidautotune (M303 E-1 S60 C8)
  454. #define DEFAULT_bedKp 370.25
  455. #define DEFAULT_bedKi 62.77
  456. #define DEFAULT_bedKd 545.98
  457. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  458. #endif // PIDTEMPBED
  459. // @section extruder
  460. /**
  461. * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
  462. * Add M302 to set the minimum extrusion temperature and/or turn
  463. * cold extrusion prevention on and off.
  464. *
  465. * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
  466. */
  467. #define PREVENT_COLD_EXTRUSION
  468. #define EXTRUDE_MINTEMP 170
  469. /**
  470. * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
  471. * Note: For Bowden Extruders make this large enough to allow load/unload.
  472. */
  473. #define PREVENT_LENGTHY_EXTRUDE
  474. #define EXTRUDE_MAXLENGTH 200
  475. //===========================================================================
  476. //======================== Thermal Runaway Protection =======================
  477. //===========================================================================
  478. /**
  479. * Thermal Protection provides additional protection to your printer from damage
  480. * and fire. Marlin always includes safe min and max temperature ranges which
  481. * protect against a broken or disconnected thermistor wire.
  482. *
  483. * The issue: If a thermistor falls out, it will report the much lower
  484. * temperature of the air in the room, and the the firmware will keep
  485. * the heater on.
  486. *
  487. * If you get "Thermal Runaway" or "Heating failed" errors the
  488. * details can be tuned in Configuration_adv.h
  489. */
  490. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  491. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  492. #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
  493. //===========================================================================
  494. //============================= Mechanical Settings =========================
  495. //===========================================================================
  496. // @section machine
  497. // Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
  498. // either in the usual order or reversed
  499. //#define COREXY
  500. //#define COREXZ
  501. //#define COREYZ
  502. //#define COREYX
  503. //#define COREZX
  504. //#define COREZY
  505. //===========================================================================
  506. //============================== Delta Settings =============================
  507. //===========================================================================
  508. // Enable DELTA kinematics and most of the default configuration for Deltas
  509. #define DELTA
  510. #if ENABLED(DELTA)
  511. // Make delta curves from many straight lines (linear interpolation).
  512. // This is a trade-off between visible corners (not enough segments)
  513. // and processor overload (too many expensive sqrt calls).
  514. #define DELTA_SEGMENTS_PER_SECOND 160
  515. // After homing move down to a height where XY movement is unconstrained
  516. //#define DELTA_HOME_TO_SAFE_ZONE
  517. // Delta calibration menu
  518. // uncomment to add three points calibration menu option.
  519. // See http://minow.blogspot.com/index.html#4918805519571907051
  520. //#define DELTA_CALIBRATION_MENU
  521. // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results)
  522. //#define DELTA_AUTO_CALIBRATION
  523. // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
  524. #if ENABLED(DELTA_AUTO_CALIBRATION)
  525. // set the default number of probe points : n*n (1 -> 7)
  526. #define DELTA_CALIBRATION_DEFAULT_POINTS 4
  527. #endif
  528. #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
  529. // Set the steprate for papertest probing
  530. #define PROBE_MANUALLY_STEP 0.05 // (mm)
  531. #endif
  532. // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
  533. #define DELTA_PRINTABLE_RADIUS 127.0 // (mm)
  534. // Center-to-center distance of the holes in the diagonal push rods.
  535. #define DELTA_DIAGONAL_ROD 301.0 // (mm)
  536. // Distance between bed and nozzle Z home position
  537. #define DELTA_HEIGHT 277.00 // (mm) Get this value from G33 auto calibrate
  538. #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate
  539. // Horizontal distance bridged by diagonal push rods when effector is centered.
  540. #define DELTA_RADIUS 152.357 // (mm) Get this value from G33 auto calibrate
  541. // Trim adjustments for individual towers
  542. // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
  543. // measured in degrees anticlockwise looking from above the printer
  544. #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate
  545. // Delta radius and diagonal rod adjustments (mm)
  546. //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 }
  547. //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 }
  548. #endif
  549. //===========================================================================
  550. //============================== Endstop Settings ===========================
  551. //===========================================================================
  552. // @section homing
  553. // Specify here all the endstop connectors that are connected to any endstop or probe.
  554. // Almost all printers will be using one per axis. Probes will use one or more of the
  555. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
  556. //#define USE_XMIN_PLUG
  557. //#define USE_YMIN_PLUG
  558. #define USE_ZMIN_PLUG // a Z probe
  559. #define USE_XMAX_PLUG
  560. #define USE_YMAX_PLUG
  561. #define USE_ZMAX_PLUG
  562. // Enable pullup for all endstops to prevent a floating state
  563. #define ENDSTOPPULLUPS
  564. #if DISABLED(ENDSTOPPULLUPS)
  565. // Disable ENDSTOPPULLUPS to set pullups individually
  566. //#define ENDSTOPPULLUP_XMAX
  567. //#define ENDSTOPPULLUP_YMAX
  568. //#define ENDSTOPPULLUP_ZMAX
  569. //#define ENDSTOPPULLUP_XMIN
  570. //#define ENDSTOPPULLUP_YMIN
  571. //#define ENDSTOPPULLUP_ZMIN
  572. //#define ENDSTOPPULLUP_ZMIN_PROBE
  573. #endif
  574. // Enable pulldown for all endstops to prevent a floating state
  575. //#define ENDSTOPPULLDOWNS
  576. #if DISABLED(ENDSTOPPULLDOWNS)
  577. // Disable ENDSTOPPULLDOWNS to set pulldowns individually
  578. //#define ENDSTOPPULLDOWN_XMAX
  579. //#define ENDSTOPPULLDOWN_YMAX
  580. //#define ENDSTOPPULLDOWN_ZMAX
  581. //#define ENDSTOPPULLDOWN_XMIN
  582. //#define ENDSTOPPULLDOWN_YMIN
  583. //#define ENDSTOPPULLDOWN_ZMIN
  584. //#define ENDSTOPPULLDOWN_ZMIN_PROBE
  585. #endif
  586. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  587. #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  588. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  589. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  590. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  591. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  592. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  593. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
  594. /**
  595. * Stepper Drivers
  596. *
  597. * These settings allow Marlin to tune stepper driver timing and enable advanced options for
  598. * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
  599. *
  600. * A4988 is assumed for unspecified drivers.
  601. *
  602. * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  603. * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
  604. * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
  605. * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
  606. * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  607. * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  608. */
  609. //#define X_DRIVER_TYPE A4988
  610. //#define Y_DRIVER_TYPE A4988
  611. //#define Z_DRIVER_TYPE A4988
  612. //#define X2_DRIVER_TYPE A4988
  613. //#define Y2_DRIVER_TYPE A4988
  614. //#define Z2_DRIVER_TYPE A4988
  615. //#define Z3_DRIVER_TYPE A4988
  616. //#define E0_DRIVER_TYPE A4988
  617. //#define E1_DRIVER_TYPE A4988
  618. //#define E2_DRIVER_TYPE A4988
  619. //#define E3_DRIVER_TYPE A4988
  620. //#define E4_DRIVER_TYPE A4988
  621. //#define E5_DRIVER_TYPE A4988
  622. // Enable this feature if all enabled endstop pins are interrupt-capable.
  623. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
  624. //#define ENDSTOP_INTERRUPTS_FEATURE
  625. /**
  626. * Endstop Noise Threshold
  627. *
  628. * Enable if your probe or endstops falsely trigger due to noise.
  629. *
  630. * - Higher values may affect repeatability or accuracy of some bed probes.
  631. * - To fix noise install a 100nF ceramic capacitor inline with the switch.
  632. * - This feature is not required for common micro-switches mounted on PCBs
  633. * based on the Makerbot design, which already have the 100nF capacitor.
  634. *
  635. * :[2,3,4,5,6,7]
  636. */
  637. //#define ENDSTOP_NOISE_THRESHOLD 2
  638. //=============================================================================
  639. //============================== Movement Settings ============================
  640. //=============================================================================
  641. // @section motion
  642. #define XYZ_FULL_STEPS_PER_ROTATION 200
  643. #define XYZ_MICROSTEPS 32
  644. #define XYZ_BELT_PITCH 2
  645. #define XYZ_PULLEY_TEETH 20
  646. // delta speeds must be the same on xyz
  647. #define XYZ_STEPS ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
  648. /**
  649. * Default Settings
  650. *
  651. * These settings can be reset by M502
  652. *
  653. * Note that if EEPROM is enabled, saved values will override these.
  654. */
  655. /**
  656. * With this option each E stepper can have its own factors for the
  657. * following movement settings. If fewer factors are given than the
  658. * total number of extruders, the last value applies to the rest.
  659. */
  660. //#define DISTINCT_E_FACTORS
  661. /**
  662. * Default Axis Steps Per Unit (steps/mm)
  663. * Override with M92
  664. * X, Y, Z, E0 [, E1[, E2...]]
  665. */
  666. // variables to calculate steps
  667. #define XYZ_FULL_STEPS_PER_ROTATION 200
  668. #define XYZ_MICROSTEPS 32
  669. #define XYZ_BELT_PITCH 2
  670. #define XYZ_PULLEY_TEETH 20
  671. // delta speeds must be the same on xyz
  672. #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH))
  673. #define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 184.8 } // default steps per unit for Kossel (GT2, 20 tooth)
  674. /**
  675. * Default Max Feed Rate (mm/s)
  676. * Override with M203
  677. * X, Y, Z, E0 [, E1[, E2...]]
  678. */
  679. #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 }
  680. //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
  681. #if ENABLED(LIMITED_MAX_FR_EDITING)
  682. #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
  683. #endif
  684. /**
  685. * Default Max Acceleration (change/s) change = mm/s
  686. * (Maximum start speed for accelerated moves)
  687. * Override with M201
  688. * X, Y, Z, E0 [, E1[, E2...]]
  689. */
  690. #define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 }
  691. //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
  692. #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
  693. #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits
  694. #endif
  695. /**
  696. * Default Acceleration (change/s) change = mm/s
  697. * Override with M204
  698. *
  699. * M204 P Acceleration
  700. * M204 R Retract Acceleration
  701. * M204 T Travel Acceleration
  702. */
  703. #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
  704. #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
  705. #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
  706. /**
  707. * Default Jerk limits (mm/s)
  708. * Override with M205 X Y Z E
  709. *
  710. * "Jerk" specifies the minimum speed change that requires acceleration.
  711. * When changing speed and direction, if the difference is less than the
  712. * value set here, it may happen instantaneously.
  713. */
  714. #define CLASSIC_JERK
  715. #if ENABLED(CLASSIC_JERK)
  716. #define DEFAULT_XJERK 10.0
  717. #define DEFAULT_YJERK DEFAULT_XJERK
  718. #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
  719. //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
  720. #if ENABLED(LIMITED_JERK_EDITING)
  721. #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
  722. #endif
  723. #endif
  724. #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
  725. /**
  726. * Junction Deviation Factor
  727. *
  728. * See:
  729. * https://reprap.org/forum/read.php?1,739819
  730. * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  731. */
  732. #if DISABLED(CLASSIC_JERK)
  733. #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
  734. #endif
  735. /**
  736. * S-Curve Acceleration
  737. *
  738. * This option eliminates vibration during printing by fitting a Bézier
  739. * curve to move acceleration, producing much smoother direction changes.
  740. *
  741. * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  742. */
  743. //#define S_CURVE_ACCELERATION
  744. //===========================================================================
  745. //============================= Z Probe Options =============================
  746. //===========================================================================
  747. // @section probes
  748. //
  749. // See http://marlinfw.org/docs/configuration/probes.html
  750. //
  751. /**
  752. * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  753. *
  754. * Enable this option for a probe connected to the Z Min endstop pin.
  755. */
  756. #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  757. /**
  758. * Z_MIN_PROBE_PIN
  759. *
  760. * Define this pin if the probe is not connected to Z_MIN_PIN.
  761. * If not defined the default pin for the selected MOTHERBOARD
  762. * will be used. Most of the time the default is what you want.
  763. *
  764. * - The simplest option is to use a free endstop connector.
  765. * - Use 5V for powered (usually inductive) sensors.
  766. *
  767. * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
  768. * - For simple switches connect...
  769. * - normally-closed switches to GND and D32.
  770. * - normally-open switches to 5V and D32.
  771. *
  772. */
  773. //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
  774. /**
  775. * Probe Type
  776. *
  777. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
  778. * Activate one of these to use Auto Bed Leveling below.
  779. */
  780. /**
  781. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
  782. * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  783. * or (with LCD_BED_LEVELING) the LCD controller.
  784. */
  785. //#define PROBE_MANUALLY
  786. //#define MANUAL_PROBE_START_Z 0.2
  787. /**
  788. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  789. * (e.g., an inductive probe or a nozzle-based probe-switch.)
  790. */
  791. //#define FIX_MOUNTED_PROBE
  792. /**
  793. * Use the nozzle as the probe, as with a conductive
  794. * nozzle system or a piezo-electric smart effector.
  795. */
  796. //#define NOZZLE_AS_PROBE
  797. /**
  798. * Z Servo Probe, such as an endstop switch on a rotating arm.
  799. */
  800. //#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
  801. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
  802. /**
  803. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  804. */
  805. //#define BLTOUCH
  806. /**
  807. * Touch-MI Probe by hotends.fr
  808. *
  809. * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
  810. * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
  811. * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
  812. *
  813. * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
  814. * and a minimum Z_HOMING_HEIGHT of 10.
  815. */
  816. //#define TOUCH_MI_PROBE
  817. #if ENABLED(TOUCH_MI_PROBE)
  818. #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
  819. //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
  820. //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu)
  821. #endif
  822. // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
  823. //#define SOLENOID_PROBE
  824. // A sled-mounted probe like those designed by Charles Bell.
  825. //#define Z_PROBE_SLED
  826. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  827. // A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
  828. //#define RACK_AND_PINION_PROBE
  829. #if ENABLED(RACK_AND_PINION_PROBE)
  830. #define Z_PROBE_DEPLOY_X X_MIN_POS
  831. #define Z_PROBE_RETRACT_X X_MAX_POS
  832. #endif
  833. /**
  834. * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  835. * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
  836. */
  837. #define Z_PROBE_ALLEN_KEY
  838. #if ENABLED(Z_PROBE_ALLEN_KEY)
  839. // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
  840. // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
  841. // Kossel Pro
  842. #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { -105.00, 0.00, 100.0 } // Move left but not quite so far that we'll bump the belt
  843. #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED
  844. #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { -110.00, -125.00, 100.0 } // Move outward to position deploy pin to the left of the arm
  845. #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED
  846. #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { -110.00 * 0.75, -125.00 * 0.75, 100.0 }
  847. #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED
  848. #define Z_PROBE_ALLEN_KEY_DEPLOY_4 { 45.00, -125.00, 100.0 } // Move right to trigger deploy pin
  849. #define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE (XY_PROBE_SPEED)/2
  850. #define Z_PROBE_ALLEN_KEY_STOW_1 { 36.00, -125.00, 75.0 } // Line up with bed retaining clip
  851. #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
  852. #define Z_PROBE_ALLEN_KEY_STOW_2 { 36.00, -125.00, 0.0 } // move down to retract probe
  853. #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/2
  854. #define Z_PROBE_ALLEN_KEY_STOW_3 { 0.0, 0.0, 100.0 } // return to 0,0,100
  855. #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED
  856. #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 100.0 }
  857. #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED
  858. #endif // Z_PROBE_ALLEN_KEY
  859. /**
  860. * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
  861. *
  862. * In the following example the X and Y offsets are both positive:
  863. *
  864. * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
  865. *
  866. * +-- BACK ---+
  867. * | |
  868. * L | (+) P | R <-- probe (20,20)
  869. * E | | I
  870. * F | (-) N (+) | G <-- nozzle (10,10)
  871. * T | | H
  872. * | (-) | T
  873. * | |
  874. * O-- FRONT --+
  875. * (0,0)
  876. *
  877. * Specify a Probe position as { X, Y, Z }
  878. */
  879. #define NOZZLE_TO_PROBE_OFFSET { -23, -6, -17.25 } // KosselPro actual: -22.919, -6.304, -17.45
  880. /**
  881. * Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of
  882. * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed.
  883. */
  884. // Most probes should stay away from the edges of the bed, but
  885. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
  886. #define MIN_PROBE_EDGE 10
  887. // X and Y axis travel speed (mm/m) between probes
  888. #define XY_PROBE_SPEED 8000
  889. // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
  890. #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
  891. // Feedrate (mm/m) for the "accurate" probe of each point
  892. #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
  893. /**
  894. * Multiple Probing
  895. *
  896. * You may get improved results by probing 2 or more times.
  897. * With EXTRA_PROBING the more atypical reading(s) will be disregarded.
  898. *
  899. * A total of 2 does fast/slow probes with a weighted average.
  900. * A total of 3 or more adds more slow probes, taking the average.
  901. */
  902. //#define MULTIPLE_PROBING 2
  903. //#define EXTRA_PROBING 1
  904. /**
  905. * Z probes require clearance when deploying, stowing, and moving between
  906. * probe points to avoid hitting the bed and other hardware.
  907. * Servo-mounted probes require extra space for the arm to rotate.
  908. * Inductive probes need space to keep from triggering early.
  909. *
  910. * Use these settings to specify the distance (mm) to raise the probe (or
  911. * lower the bed). The values set here apply over and above any (negative)
  912. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  913. * Only integer values >= 1 are valid here.
  914. *
  915. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
  916. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
  917. */
  918. #define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow
  919. #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
  920. #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
  921. //#define Z_AFTER_PROBING 5 // Z position after probing is done
  922. #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
  923. // For M851 give a range for adjusting the Z probe offset
  924. #define Z_PROBE_OFFSET_RANGE_MIN -15
  925. #define Z_PROBE_OFFSET_RANGE_MAX 5
  926. // Enable the M48 repeatability test to test probe accuracy
  927. //#define Z_MIN_PROBE_REPEATABILITY_TEST
  928. // Before deploy/stow pause for user confirmation
  929. //#define PAUSE_BEFORE_DEPLOY_STOW
  930. #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
  931. //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
  932. #endif
  933. /**
  934. * Enable one or more of the following if probing seems unreliable.
  935. * Heaters and/or fans can be disabled during probing to minimize electrical
  936. * noise. A delay can also be added to allow noise and vibration to settle.
  937. * These options are most useful for the BLTouch probe, but may also improve
  938. * readings with inductive probes and piezo sensors.
  939. */
  940. //#define PROBING_HEATERS_OFF // Turn heaters off when probing
  941. #if ENABLED(PROBING_HEATERS_OFF)
  942. //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
  943. #endif
  944. //#define PROBING_FANS_OFF // Turn fans off when probing
  945. //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
  946. //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
  947. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  948. // :{ 0:'Low', 1:'High' }
  949. #define X_ENABLE_ON 0
  950. #define Y_ENABLE_ON 0
  951. #define Z_ENABLE_ON 0
  952. #define E_ENABLE_ON 0 // For all extruders
  953. // Disables axis stepper immediately when it's not being used.
  954. // WARNING: When motors turn off there is a chance of losing position accuracy!
  955. #define DISABLE_X false
  956. #define DISABLE_Y false
  957. #define DISABLE_Z false
  958. // Warn on display about possibly reduced accuracy
  959. //#define DISABLE_REDUCED_ACCURACY_WARNING
  960. // @section extruder
  961. #define DISABLE_E false // For all extruders
  962. #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
  963. // @section machine
  964. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  965. #define INVERT_X_DIR true
  966. #define INVERT_Y_DIR true
  967. #define INVERT_Z_DIR true
  968. // @section extruder
  969. // For direct drive extruder v9 set to true, for geared extruder set to false.
  970. #define INVERT_E0_DIR true
  971. #define INVERT_E1_DIR false
  972. #define INVERT_E2_DIR false
  973. #define INVERT_E3_DIR false
  974. #define INVERT_E4_DIR false
  975. #define INVERT_E5_DIR false
  976. // @section homing
  977. //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
  978. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
  979. //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
  980. // Be sure you have this distance over your Z_MAX_POS in case.
  981. // Direction of endstops when homing; 1=MAX, -1=MIN
  982. // :[-1,1]
  983. #define X_HOME_DIR 1 // deltas always home to max
  984. #define Y_HOME_DIR 1
  985. #define Z_HOME_DIR 1
  986. // @section machine
  987. // The size of the print bed
  988. #define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2)
  989. #define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2)
  990. // Travel limits (mm) after homing, corresponding to endstop positions.
  991. #define X_MIN_POS -(DELTA_PRINTABLE_RADIUS)
  992. #define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS)
  993. #define Z_MIN_POS 0
  994. #define X_MAX_POS DELTA_PRINTABLE_RADIUS
  995. #define Y_MAX_POS DELTA_PRINTABLE_RADIUS
  996. #define Z_MAX_POS MANUAL_Z_HOME_POS
  997. /**
  998. * Software Endstops
  999. *
  1000. * - Prevent moves outside the set machine bounds.
  1001. * - Individual axes can be disabled, if desired.
  1002. * - X and Y only apply to Cartesian robots.
  1003. * - Use 'M211' to set software endstops on/off or report current state
  1004. */
  1005. // Min software endstops constrain movement within minimum coordinate bounds
  1006. #define MIN_SOFTWARE_ENDSTOPS
  1007. #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  1008. #define MIN_SOFTWARE_ENDSTOP_X
  1009. #define MIN_SOFTWARE_ENDSTOP_Y
  1010. #define MIN_SOFTWARE_ENDSTOP_Z
  1011. #endif
  1012. // Max software endstops constrain movement within maximum coordinate bounds
  1013. #define MAX_SOFTWARE_ENDSTOPS
  1014. #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
  1015. #define MAX_SOFTWARE_ENDSTOP_X
  1016. #define MAX_SOFTWARE_ENDSTOP_Y
  1017. #define MAX_SOFTWARE_ENDSTOP_Z
  1018. #endif
  1019. #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  1020. //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
  1021. #endif
  1022. /**
  1023. * Filament Runout Sensors
  1024. * Mechanical or opto endstops are used to check for the presence of filament.
  1025. *
  1026. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  1027. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  1028. * By default the firmware assumes HIGH=FILAMENT PRESENT.
  1029. */
  1030. //#define FILAMENT_RUNOUT_SENSOR
  1031. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  1032. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
  1033. #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor.
  1034. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
  1035. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
  1036. // Set one or more commands to execute on filament runout.
  1037. // (After 'M412 H' Marlin will ask the host to handle the process.)
  1038. #define FILAMENT_RUNOUT_SCRIPT "M600"
  1039. // After a runout is detected, continue printing this length of filament
  1040. // before executing the runout script. Useful for a sensor at the end of
  1041. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
  1042. //#define FILAMENT_RUNOUT_DISTANCE_MM 25
  1043. #ifdef FILAMENT_RUNOUT_DISTANCE_MM
  1044. // Enable this option to use an encoder disc that toggles the runout pin
  1045. // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
  1046. // large enough to avoid false positives.)
  1047. //#define FILAMENT_MOTION_SENSOR
  1048. #endif
  1049. #endif
  1050. //===========================================================================
  1051. //=============================== Bed Leveling ==============================
  1052. //===========================================================================
  1053. // @section calibrate
  1054. /**
  1055. * Choose one of the options below to enable G29 Bed Leveling. The parameters
  1056. * and behavior of G29 will change depending on your selection.
  1057. *
  1058. * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
  1059. *
  1060. * - AUTO_BED_LEVELING_3POINT
  1061. * Probe 3 arbitrary points on the bed (that aren't collinear)
  1062. * You specify the XY coordinates of all 3 points.
  1063. * The result is a single tilted plane. Best for a flat bed.
  1064. *
  1065. * - AUTO_BED_LEVELING_LINEAR
  1066. * Probe several points in a grid.
  1067. * You specify the rectangle and the density of sample points.
  1068. * The result is a single tilted plane. Best for a flat bed.
  1069. *
  1070. * - AUTO_BED_LEVELING_BILINEAR
  1071. * Probe several points in a grid.
  1072. * You specify the rectangle and the density of sample points.
  1073. * The result is a mesh, best for large or uneven beds.
  1074. *
  1075. * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  1076. * A comprehensive bed leveling system combining the features and benefits
  1077. * of other systems. UBL also includes integrated Mesh Generation, Mesh
  1078. * Validation and Mesh Editing systems.
  1079. *
  1080. * - MESH_BED_LEVELING
  1081. * Probe a grid manually
  1082. * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
  1083. * For machines without a probe, Mesh Bed Leveling provides a method to perform
  1084. * leveling in steps so you can manually adjust the Z height at each grid-point.
  1085. * With an LCD controller the process is guided step-by-step.
  1086. */
  1087. //#define AUTO_BED_LEVELING_3POINT
  1088. //#define AUTO_BED_LEVELING_LINEAR
  1089. //#define AUTO_BED_LEVELING_BILINEAR
  1090. //#define AUTO_BED_LEVELING_UBL
  1091. //#define MESH_BED_LEVELING
  1092. /**
  1093. * Normally G28 leaves leveling disabled on completion. Enable
  1094. * this option to have G28 restore the prior leveling state.
  1095. */
  1096. //#define RESTORE_LEVELING_AFTER_G28
  1097. /**
  1098. * Enable detailed logging of G28, G29, M48, etc.
  1099. * Turn on with the command 'M111 S32'.
  1100. * NOTE: Requires a lot of PROGMEM!
  1101. */
  1102. //#define DEBUG_LEVELING_FEATURE
  1103. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  1104. // Gradually reduce leveling correction until a set height is reached,
  1105. // at which point movement will be level to the machine's XY plane.
  1106. // The height can be set with M420 Z<height>
  1107. //#define ENABLE_LEVELING_FADE_HEIGHT
  1108. // For Cartesian machines, instead of dividing moves on mesh boundaries,
  1109. // split up moves into short segments like a Delta. This follows the
  1110. // contours of the bed more closely than edge-to-edge straight moves.
  1111. #define SEGMENT_LEVELED_MOVES
  1112. #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
  1113. /**
  1114. * Enable the G26 Mesh Validation Pattern tool.
  1115. */
  1116. //#define G26_MESH_VALIDATION
  1117. #if ENABLED(G26_MESH_VALIDATION)
  1118. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
  1119. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
  1120. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
  1121. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
  1122. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
  1123. #endif
  1124. #endif
  1125. #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  1126. // Set the number of grid points per dimension.
  1127. // Works best with 5 or more points in each dimension.
  1128. #define GRID_MAX_POINTS_X 7
  1129. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1130. // Probe along the Y axis, advancing X after each column
  1131. //#define PROBE_Y_FIRST
  1132. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  1133. // Beyond the probed grid, continue the implied tilt?
  1134. // Default is to maintain the height of the nearest edge.
  1135. //#define EXTRAPOLATE_BEYOND_GRID
  1136. //
  1137. // Experimental Subdivision of the grid by Catmull-Rom method.
  1138. // Synthesizes intermediate points to produce a more detailed mesh.
  1139. //
  1140. //#define ABL_BILINEAR_SUBDIVISION
  1141. #if ENABLED(ABL_BILINEAR_SUBDIVISION)
  1142. // Number of subdivisions between probe points
  1143. #define BILINEAR_SUBDIVISIONS 3
  1144. #endif
  1145. #endif
  1146. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  1147. //===========================================================================
  1148. //========================= Unified Bed Leveling ============================
  1149. //===========================================================================
  1150. //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
  1151. #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
  1152. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
  1153. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1154. #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
  1155. #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
  1156. //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
  1157. // as the Z-Height correction value.
  1158. #elif ENABLED(MESH_BED_LEVELING)
  1159. //===========================================================================
  1160. //=================================== Mesh ==================================
  1161. //===========================================================================
  1162. #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
  1163. #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
  1164. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1165. //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
  1166. #endif // BED_LEVELING
  1167. /**
  1168. * Add a bed leveling sub-menu for ABL or MBL.
  1169. * Include a guided procedure if manual probing is enabled.
  1170. */
  1171. //#define LCD_BED_LEVELING
  1172. #if ENABLED(LCD_BED_LEVELING)
  1173. #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
  1174. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
  1175. //#define MESH_EDIT_MENU // Add a menu to edit mesh points
  1176. #endif
  1177. // Add a menu item to move between bed corners for manual bed adjustment
  1178. //#define LEVEL_BED_CORNERS
  1179. #if ENABLED(LEVEL_BED_CORNERS)
  1180. #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
  1181. #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
  1182. #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
  1183. //#define LEVEL_CENTER_TOO // Move to the center after the last corner
  1184. #endif
  1185. /**
  1186. * Commands to execute at the end of G29 probing.
  1187. * Useful to retract or move the Z probe out of the way.
  1188. */
  1189. //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
  1190. // @section homing
  1191. // The center of the bed is at (X=0, Y=0)
  1192. #define BED_CENTER_AT_0_0
  1193. // Manually set the home position. Leave these undefined for automatic settings.
  1194. // For DELTA this is the top-center of the Cartesian print volume.
  1195. //#define MANUAL_X_HOME_POS 0
  1196. //#define MANUAL_Y_HOME_POS 0
  1197. #define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing
  1198. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
  1199. //
  1200. // With this feature enabled:
  1201. //
  1202. // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
  1203. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
  1204. // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
  1205. // - Prevent Z homing when the Z probe is outside bed area.
  1206. //
  1207. #define Z_SAFE_HOMING
  1208. #if ENABLED(Z_SAFE_HOMING)
  1209. #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
  1210. #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
  1211. #endif
  1212. // Delta only homes to Z
  1213. #define HOMING_FEEDRATE_Z (200*60)
  1214. // Validate that endstops are triggered on homing moves
  1215. #define VALIDATE_HOMING_ENDSTOPS
  1216. // @section calibrate
  1217. /**
  1218. * Bed Skew Compensation
  1219. *
  1220. * This feature corrects for misalignment in the XYZ axes.
  1221. *
  1222. * Take the following steps to get the bed skew in the XY plane:
  1223. * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
  1224. * 2. For XY_DIAG_AC measure the diagonal A to C
  1225. * 3. For XY_DIAG_BD measure the diagonal B to D
  1226. * 4. For XY_SIDE_AD measure the edge A to D
  1227. *
  1228. * Marlin automatically computes skew factors from these measurements.
  1229. * Skew factors may also be computed and set manually:
  1230. *
  1231. * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
  1232. * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
  1233. *
  1234. * If desired, follow the same procedure for XZ and YZ.
  1235. * Use these diagrams for reference:
  1236. *
  1237. * Y Z Z
  1238. * ^ B-------C ^ B-------C ^ B-------C
  1239. * | / / | / / | / /
  1240. * | / / | / / | / /
  1241. * | A-------D | A-------D | A-------D
  1242. * +-------------->X +-------------->X +-------------->Y
  1243. * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
  1244. */
  1245. //#define SKEW_CORRECTION
  1246. #if ENABLED(SKEW_CORRECTION)
  1247. // Input all length measurements here:
  1248. #define XY_DIAG_AC 282.8427124746
  1249. #define XY_DIAG_BD 282.8427124746
  1250. #define XY_SIDE_AD 200
  1251. // Or, set the default skew factors directly here
  1252. // to override the above measurements:
  1253. #define XY_SKEW_FACTOR 0.0
  1254. //#define SKEW_CORRECTION_FOR_Z
  1255. #if ENABLED(SKEW_CORRECTION_FOR_Z)
  1256. #define XZ_DIAG_AC 282.8427124746
  1257. #define XZ_DIAG_BD 282.8427124746
  1258. #define YZ_DIAG_AC 282.8427124746
  1259. #define YZ_DIAG_BD 282.8427124746
  1260. #define YZ_SIDE_AD 200
  1261. #define XZ_SKEW_FACTOR 0.0
  1262. #define YZ_SKEW_FACTOR 0.0
  1263. #endif
  1264. // Enable this option for M852 to set skew at runtime
  1265. //#define SKEW_CORRECTION_GCODE
  1266. #endif
  1267. //=============================================================================
  1268. //============================= Additional Features ===========================
  1269. //=============================================================================
  1270. // @section extras
  1271. /**
  1272. * EEPROM
  1273. *
  1274. * Persistent storage to preserve configurable settings across reboots.
  1275. *
  1276. * M500 - Store settings to EEPROM.
  1277. * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  1278. * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  1279. */
  1280. //#define EEPROM_SETTINGS // Persistent storage with M500 and M501
  1281. //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
  1282. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
  1283. #if ENABLED(EEPROM_SETTINGS)
  1284. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
  1285. #endif
  1286. //
  1287. // Host Keepalive
  1288. //
  1289. // When enabled Marlin will send a busy status message to the host
  1290. // every couple of seconds when it can't accept commands.
  1291. //
  1292. #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
  1293. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
  1294. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
  1295. //
  1296. // M100 Free Memory Watcher
  1297. //
  1298. //#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
  1299. //
  1300. // G20/G21 Inch mode support
  1301. //
  1302. //#define INCH_MODE_SUPPORT
  1303. //
  1304. // M149 Set temperature units support
  1305. //
  1306. //#define TEMPERATURE_UNITS_SUPPORT
  1307. // @section temperature
  1308. // Preheat Constants
  1309. #define PREHEAT_1_LABEL "PLA"
  1310. #define PREHEAT_1_TEMP_HOTEND 180
  1311. #define PREHEAT_1_TEMP_BED 70
  1312. #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
  1313. #define PREHEAT_2_LABEL "ABS"
  1314. #define PREHEAT_2_TEMP_HOTEND 240
  1315. #define PREHEAT_2_TEMP_BED 100
  1316. #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
  1317. /**
  1318. * Nozzle Park
  1319. *
  1320. * Park the nozzle at the given XYZ position on idle or G27.
  1321. *
  1322. * The "P" parameter controls the action applied to the Z axis:
  1323. *
  1324. * P0 (Default) If Z is below park Z raise the nozzle.
  1325. * P1 Raise the nozzle always to Z-park height.
  1326. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  1327. */
  1328. //#define NOZZLE_PARK_FEATURE
  1329. #if ENABLED(NOZZLE_PARK_FEATURE)
  1330. // Specify a park position as { X, Y, Z_raise }
  1331. #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 }
  1332. #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
  1333. #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
  1334. #endif
  1335. /**
  1336. * Clean Nozzle Feature -- EXPERIMENTAL
  1337. *
  1338. * Adds the G12 command to perform a nozzle cleaning process.
  1339. *
  1340. * Parameters:
  1341. * P Pattern
  1342. * S Strokes / Repetitions
  1343. * T Triangles (P1 only)
  1344. *
  1345. * Patterns:
  1346. * P0 Straight line (default). This process requires a sponge type material
  1347. * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
  1348. * between the start / end points.
  1349. *
  1350. * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
  1351. * number of zig-zag triangles to do. "S" defines the number of strokes.
  1352. * Zig-zags are done in whichever is the narrower dimension.
  1353. * For example, "G12 P1 S1 T3" will execute:
  1354. *
  1355. * --
  1356. * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
  1357. * | | / \ / \ / \ |
  1358. * A | | / \ / \ / \ |
  1359. * | | / \ / \ / \ |
  1360. * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
  1361. * -- +--------------------------------+
  1362. * |________|_________|_________|
  1363. * T1 T2 T3
  1364. *
  1365. * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
  1366. * "R" specifies the radius. "S" specifies the stroke count.
  1367. * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
  1368. *
  1369. * Caveats: The ending Z should be the same as starting Z.
  1370. * Attention: EXPERIMENTAL. G-code arguments may change.
  1371. *
  1372. */
  1373. //#define NOZZLE_CLEAN_FEATURE
  1374. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  1375. // Default number of pattern repetitions
  1376. #define NOZZLE_CLEAN_STROKES 12
  1377. // Default number of triangles
  1378. #define NOZZLE_CLEAN_TRIANGLES 3
  1379. // Specify positions as { X, Y, Z }
  1380. #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
  1381. #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
  1382. // Circular pattern radius
  1383. #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
  1384. // Circular pattern circle fragments number
  1385. #define NOZZLE_CLEAN_CIRCLE_FN 10
  1386. // Middle point of circle
  1387. #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
  1388. // Move the nozzle to the initial position after cleaning
  1389. #define NOZZLE_CLEAN_GOBACK
  1390. // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
  1391. //#define NOZZLE_CLEAN_NO_Z
  1392. #endif
  1393. /**
  1394. * Print Job Timer
  1395. *
  1396. * Automatically start and stop the print job timer on M104/M109/M190.
  1397. *
  1398. * M104 (hotend, no wait) - high temp = none, low temp = stop timer
  1399. * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
  1400. * M190 (bed, wait) - high temp = start timer, low temp = none
  1401. *
  1402. * The timer can also be controlled with the following commands:
  1403. *
  1404. * M75 - Start the print job timer
  1405. * M76 - Pause the print job timer
  1406. * M77 - Stop the print job timer
  1407. */
  1408. #define PRINTJOB_TIMER_AUTOSTART
  1409. /**
  1410. * Print Counter
  1411. *
  1412. * Track statistical data such as:
  1413. *
  1414. * - Total print jobs
  1415. * - Total successful print jobs
  1416. * - Total failed print jobs
  1417. * - Total time printing
  1418. *
  1419. * View the current statistics with M78.
  1420. */
  1421. //#define PRINTCOUNTER
  1422. //=============================================================================
  1423. //============================= LCD and SD support ============================
  1424. //=============================================================================
  1425. // @section lcd
  1426. /**
  1427. * LCD LANGUAGE
  1428. *
  1429. * Select the language to display on the LCD. These languages are available:
  1430. *
  1431. * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana,
  1432. * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test
  1433. *
  1434. * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  1435. */
  1436. #define LCD_LANGUAGE en
  1437. /**
  1438. * LCD Character Set
  1439. *
  1440. * Note: This option is NOT applicable to Graphical Displays.
  1441. *
  1442. * All character-based LCDs provide ASCII plus one of these
  1443. * language extensions:
  1444. *
  1445. * - JAPANESE ... the most common
  1446. * - WESTERN ... with more accented characters
  1447. * - CYRILLIC ... for the Russian language
  1448. *
  1449. * To determine the language extension installed on your controller:
  1450. *
  1451. * - Compile and upload with LCD_LANGUAGE set to 'test'
  1452. * - Click the controller to view the LCD menu
  1453. * - The LCD will display Japanese, Western, or Cyrillic text
  1454. *
  1455. * See http://marlinfw.org/docs/development/lcd_language.html
  1456. *
  1457. * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  1458. */
  1459. #define DISPLAY_CHARSET_HD44780 JAPANESE
  1460. /**
  1461. * Info Screen Style (0:Classic, 1:Prusa)
  1462. *
  1463. * :[0:'Classic', 1:'Prusa']
  1464. */
  1465. #define LCD_INFO_SCREEN_STYLE 0
  1466. /**
  1467. * SD CARD
  1468. *
  1469. * SD Card support is disabled by default. If your controller has an SD slot,
  1470. * you must uncomment the following option or it won't work.
  1471. *
  1472. */
  1473. #define SDSUPPORT
  1474. /**
  1475. * SD CARD: SPI SPEED
  1476. *
  1477. * Enable one of the following items for a slower SPI transfer speed.
  1478. * This may be required to resolve "volume init" errors.
  1479. */
  1480. //#define SPI_SPEED SPI_HALF_SPEED
  1481. //#define SPI_SPEED SPI_QUARTER_SPEED
  1482. //#define SPI_SPEED SPI_EIGHTH_SPEED
  1483. /**
  1484. * SD CARD: ENABLE CRC
  1485. *
  1486. * Use CRC checks and retries on the SD communication.
  1487. */
  1488. //#define SD_CHECK_AND_RETRY
  1489. /**
  1490. * LCD Menu Items
  1491. *
  1492. * Disable all menus and only display the Status Screen, or
  1493. * just remove some extraneous menu items to recover space.
  1494. */
  1495. //#define NO_LCD_MENUS
  1496. //#define SLIM_LCD_MENUS
  1497. //
  1498. // ENCODER SETTINGS
  1499. //
  1500. // This option overrides the default number of encoder pulses needed to
  1501. // produce one step. Should be increased for high-resolution encoders.
  1502. //
  1503. //#define ENCODER_PULSES_PER_STEP 4
  1504. //
  1505. // Use this option to override the number of step signals required to
  1506. // move between next/prev menu items.
  1507. //
  1508. //#define ENCODER_STEPS_PER_MENU_ITEM 1
  1509. /**
  1510. * Encoder Direction Options
  1511. *
  1512. * Test your encoder's behavior first with both options disabled.
  1513. *
  1514. * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
  1515. * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
  1516. * Reversed Value Editing only? Enable BOTH options.
  1517. */
  1518. //
  1519. // This option reverses the encoder direction everywhere.
  1520. //
  1521. // Set this option if CLOCKWISE causes values to DECREASE
  1522. //
  1523. //#define REVERSE_ENCODER_DIRECTION
  1524. //
  1525. // This option reverses the encoder direction for navigating LCD menus.
  1526. //
  1527. // If CLOCKWISE normally moves DOWN this makes it go UP.
  1528. // If CLOCKWISE normally moves UP this makes it go DOWN.
  1529. //
  1530. //#define REVERSE_MENU_DIRECTION
  1531. //
  1532. // This option reverses the encoder direction for Select Screen.
  1533. //
  1534. // If CLOCKWISE normally moves LEFT this makes it go RIGHT.
  1535. // If CLOCKWISE normally moves RIGHT this makes it go LEFT.
  1536. //
  1537. //#define REVERSE_SELECT_DIRECTION
  1538. //
  1539. // Individual Axis Homing
  1540. //
  1541. // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
  1542. //
  1543. //#define INDIVIDUAL_AXIS_HOMING_MENU
  1544. //
  1545. // SPEAKER/BUZZER
  1546. //
  1547. // If you have a speaker that can produce tones, enable it here.
  1548. // By default Marlin assumes you have a buzzer with a fixed frequency.
  1549. //
  1550. //#define SPEAKER
  1551. //
  1552. // The duration and frequency for the UI feedback sound.
  1553. // Set these to 0 to disable audio feedback in the LCD menus.
  1554. //
  1555. // Note: Test audio output with the G-Code:
  1556. // M300 S<frequency Hz> P<duration ms>
  1557. //
  1558. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
  1559. //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
  1560. //=============================================================================
  1561. //======================== LCD / Controller Selection =========================
  1562. //======================== (Character-based LCDs) =========================
  1563. //=============================================================================
  1564. //
  1565. // RepRapDiscount Smart Controller.
  1566. // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
  1567. //
  1568. // Note: Usually sold with a white PCB.
  1569. //
  1570. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  1571. //
  1572. // Original RADDS LCD Display+Encoder+SDCardReader
  1573. // http://doku.radds.org/dokumentation/lcd-display/
  1574. //
  1575. //#define RADDS_DISPLAY
  1576. //
  1577. // ULTIMAKER Controller.
  1578. //
  1579. //#define ULTIMAKERCONTROLLER
  1580. //
  1581. // ULTIPANEL as seen on Thingiverse.
  1582. //
  1583. //#define ULTIPANEL
  1584. //
  1585. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  1586. // http://reprap.org/wiki/PanelOne
  1587. //
  1588. //#define PANEL_ONE
  1589. //
  1590. // GADGETS3D G3D LCD/SD Controller
  1591. // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  1592. //
  1593. // Note: Usually sold with a blue PCB.
  1594. //
  1595. //#define G3D_PANEL
  1596. //
  1597. // RigidBot Panel V1.0
  1598. // http://www.inventapart.com/
  1599. //
  1600. //#define RIGIDBOT_PANEL
  1601. //
  1602. // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
  1603. // https://www.aliexpress.com/item/32765887917.html
  1604. //
  1605. //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
  1606. //
  1607. // ANET and Tronxy 20x4 Controller
  1608. //
  1609. //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
  1610. // This LCD is known to be susceptible to electrical interference
  1611. // which scrambles the display. Pressing any button clears it up.
  1612. // This is a LCD2004 display with 5 analog buttons.
  1613. //
  1614. // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
  1615. //
  1616. //#define ULTRA_LCD
  1617. //=============================================================================
  1618. //======================== LCD / Controller Selection =========================
  1619. //===================== (I2C and Shift-Register LCDs) =====================
  1620. //=============================================================================
  1621. //
  1622. // CONTROLLER TYPE: I2C
  1623. //
  1624. // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
  1625. // library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  1626. //
  1627. //
  1628. // Elefu RA Board Control Panel
  1629. // http://www.elefu.com/index.php?route=product/product&product_id=53
  1630. //
  1631. //#define RA_CONTROL_PANEL
  1632. //
  1633. // Sainsmart (YwRobot) LCD Displays
  1634. //
  1635. // These require F.Malpartida's LiquidCrystal_I2C library
  1636. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
  1637. //
  1638. //#define LCD_SAINSMART_I2C_1602
  1639. //#define LCD_SAINSMART_I2C_2004
  1640. //
  1641. // Generic LCM1602 LCD adapter
  1642. //
  1643. //#define LCM1602
  1644. //
  1645. // PANELOLU2 LCD with status LEDs,
  1646. // separate encoder and click inputs.
  1647. //
  1648. // Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
  1649. // For more info: https://github.com/lincomatic/LiquidTWI2
  1650. //
  1651. // Note: The PANELOLU2 encoder click input can either be directly connected to
  1652. // a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  1653. //
  1654. //#define LCD_I2C_PANELOLU2
  1655. //
  1656. // Panucatt VIKI LCD with status LEDs,
  1657. // integrated click & L/R/U/D buttons, separate encoder inputs.
  1658. //
  1659. //#define LCD_I2C_VIKI
  1660. //
  1661. // CONTROLLER TYPE: Shift register panels
  1662. //
  1663. //
  1664. // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
  1665. // LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
  1666. //
  1667. //#define SAV_3DLCD
  1668. //
  1669. // 3-wire SR LCD with strobe using 74HC4094
  1670. // https://github.com/mikeshub/SailfishLCD
  1671. // Uses the code directly from Sailfish
  1672. //
  1673. //#define FF_INTERFACEBOARD
  1674. //=============================================================================
  1675. //======================= LCD / Controller Selection =======================
  1676. //========================= (Graphical LCDs) ========================
  1677. //=============================================================================
  1678. //
  1679. // CONTROLLER TYPE: Graphical 128x64 (DOGM)
  1680. //
  1681. // IMPORTANT: The U8glib library is required for Graphical Display!
  1682. // https://github.com/olikraus/U8glib_Arduino
  1683. //
  1684. //
  1685. // RepRapDiscount FULL GRAPHIC Smart Controller
  1686. // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  1687. //
  1688. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  1689. //
  1690. // ReprapWorld Graphical LCD
  1691. // https://reprapworld.com/?products_details&products_id/1218
  1692. //
  1693. //#define REPRAPWORLD_GRAPHICAL_LCD
  1694. //
  1695. // Activate one of these if you have a Panucatt Devices
  1696. // Viki 2.0 or mini Viki with Graphic LCD
  1697. // http://panucatt.com
  1698. //
  1699. //#define VIKI2
  1700. //#define miniVIKI
  1701. //
  1702. // MakerLab Mini Panel with graphic
  1703. // controller and SD support - http://reprap.org/wiki/Mini_panel
  1704. //
  1705. //#define MINIPANEL
  1706. //
  1707. // MaKr3d Makr-Panel with graphic controller and SD support.
  1708. // http://reprap.org/wiki/MaKr3d_MaKrPanel
  1709. //
  1710. //#define MAKRPANEL
  1711. //
  1712. // Adafruit ST7565 Full Graphic Controller.
  1713. // https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  1714. //
  1715. //#define ELB_FULL_GRAPHIC_CONTROLLER
  1716. //
  1717. // BQ LCD Smart Controller shipped by
  1718. // default with the BQ Hephestos 2 and Witbox 2.
  1719. //
  1720. //#define BQ_LCD_SMART_CONTROLLER
  1721. //
  1722. // Cartesio UI
  1723. // http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
  1724. //
  1725. //#define CARTESIO_UI
  1726. //
  1727. // LCD for Melzi Card with Graphical LCD
  1728. //
  1729. //#define LCD_FOR_MELZI
  1730. //
  1731. // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
  1732. // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
  1733. //
  1734. //#define ULTI_CONTROLLER
  1735. //
  1736. // MKS MINI12864 with graphic controller and SD support
  1737. // https://reprap.org/wiki/MKS_MINI_12864
  1738. //
  1739. //#define MKS_MINI_12864
  1740. //
  1741. // FYSETC variant of the MINI12864 graphic controller with SD support
  1742. // https://wiki.fysetc.com/Mini12864_Panel/
  1743. //
  1744. //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
  1745. //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
  1746. //#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
  1747. //#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight
  1748. //
  1749. // Factory display for Creality CR-10
  1750. // https://www.aliexpress.com/item/32833148327.html
  1751. //
  1752. // This is RAMPS-compatible using a single 10-pin connector.
  1753. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
  1754. //
  1755. //#define CR10_STOCKDISPLAY
  1756. //
  1757. // ANET and Tronxy Graphical Controller
  1758. //
  1759. // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
  1760. // A clone of the RepRapDiscount full graphics display but with
  1761. // different pins/wiring (see pins_ANET_10.h).
  1762. //
  1763. //#define ANET_FULL_GRAPHICS_LCD
  1764. //
  1765. // AZSMZ 12864 LCD with SD
  1766. // https://www.aliexpress.com/item/32837222770.html
  1767. //
  1768. //#define AZSMZ_12864
  1769. //
  1770. // Silvergate GLCD controller
  1771. // http://github.com/android444/Silvergate
  1772. //
  1773. //#define SILVER_GATE_GLCD_CONTROLLER
  1774. //=============================================================================
  1775. //============================== OLED Displays ==============================
  1776. //=============================================================================
  1777. //
  1778. // SSD1306 OLED full graphics generic display
  1779. //
  1780. //#define U8GLIB_SSD1306
  1781. //
  1782. // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
  1783. //
  1784. //#define SAV_3DGLCD
  1785. #if ENABLED(SAV_3DGLCD)
  1786. #define U8GLIB_SSD1306
  1787. //#define U8GLIB_SH1106
  1788. #endif
  1789. //
  1790. // TinyBoy2 128x64 OLED / Encoder Panel
  1791. //
  1792. //#define OLED_PANEL_TINYBOY2
  1793. //
  1794. // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
  1795. // http://reprap.org/wiki/MKS_12864OLED
  1796. //
  1797. // Tiny, but very sharp OLED display
  1798. //
  1799. //#define MKS_12864OLED // Uses the SH1106 controller (default)
  1800. //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
  1801. //
  1802. // Einstart S OLED SSD1306
  1803. //
  1804. //#define U8GLIB_SH1106_EINSTART
  1805. //
  1806. // Overlord OLED display/controller with i2c buzzer and LEDs
  1807. //
  1808. //#define OVERLORD_OLED
  1809. //=============================================================================
  1810. //========================== Extensible UI Displays ===========================
  1811. //=============================================================================
  1812. //
  1813. // DGUS Touch Display with DWIN OS
  1814. //
  1815. //#define DGUS_LCD
  1816. //
  1817. // Touch-screen LCD for Malyan M200 printers
  1818. //
  1819. //#define MALYAN_LCD
  1820. //
  1821. // Touch UI for FTDI EVE (FT800/FT810) displays
  1822. // See Configuration_adv.h for all configuration options.
  1823. //
  1824. //#define TOUCH_UI_FTDI_EVE
  1825. //
  1826. // Third-party or vendor-customized controller interfaces.
  1827. // Sources should be installed in 'src/lcd/extensible_ui'.
  1828. //
  1829. //#define EXTENSIBLE_UI
  1830. //=============================================================================
  1831. //=============================== Graphical TFTs ==============================
  1832. //=============================================================================
  1833. //
  1834. // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.)
  1835. //
  1836. //#define FSMC_GRAPHICAL_TFT
  1837. //=============================================================================
  1838. //============================ Other Controllers ============================
  1839. //=============================================================================
  1840. //
  1841. // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
  1842. //
  1843. //#define TOUCH_BUTTONS
  1844. #if ENABLED(TOUCH_BUTTONS)
  1845. #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
  1846. #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
  1847. #define XPT2046_X_CALIBRATION 12316
  1848. #define XPT2046_Y_CALIBRATION -8981
  1849. #define XPT2046_X_OFFSET -43
  1850. #define XPT2046_Y_OFFSET 257
  1851. #endif
  1852. //
  1853. // RepRapWorld REPRAPWORLD_KEYPAD v1.1
  1854. // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
  1855. //
  1856. //#define REPRAPWORLD_KEYPAD
  1857. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
  1858. //=============================================================================
  1859. //=============================== Extra Features ==============================
  1860. //=============================================================================
  1861. // @section extras
  1862. // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
  1863. //#define FAST_PWM_FAN
  1864. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  1865. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  1866. // is too low, you should also increment SOFT_PWM_SCALE.
  1867. //#define FAN_SOFT_PWM
  1868. // Incrementing this by 1 will double the software PWM frequency,
  1869. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  1870. // However, control resolution will be halved for each increment;
  1871. // at zero value, there are 128 effective control positions.
  1872. // :[0,1,2,3,4,5,6,7]
  1873. #define SOFT_PWM_SCALE 0
  1874. // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
  1875. // be used to mitigate the associated resolution loss. If enabled,
  1876. // some of the PWM cycles are stretched so on average the desired
  1877. // duty cycle is attained.
  1878. //#define SOFT_PWM_DITHER
  1879. // Temperature status LEDs that display the hotend and bed temperature.
  1880. // If all hotends, bed temperature, and target temperature are under 54C
  1881. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
  1882. //#define TEMP_STAT_LEDS
  1883. // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
  1884. //#define SF_ARC_FIX
  1885. // Support for the BariCUDA Paste Extruder
  1886. //#define BARICUDA
  1887. // Support for BlinkM/CyzRgb
  1888. //#define BLINKM
  1889. // Support for PCA9632 PWM LED driver
  1890. //#define PCA9632
  1891. // Support for PCA9533 PWM LED driver
  1892. // https://github.com/mikeshub/SailfishRGB_LED
  1893. //#define PCA9533
  1894. /**
  1895. * RGB LED / LED Strip Control
  1896. *
  1897. * Enable support for an RGB LED connected to 5V digital pins, or
  1898. * an RGB Strip connected to MOSFETs controlled by digital pins.
  1899. *
  1900. * Adds the M150 command to set the LED (or LED strip) color.
  1901. * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  1902. * luminance values can be set from 0 to 255.
  1903. * For Neopixel LED an overall brightness parameter is also available.
  1904. *
  1905. * *** CAUTION ***
  1906. * LED Strips require a MOSFET Chip between PWM lines and LEDs,
  1907. * as the Arduino cannot handle the current the LEDs will require.
  1908. * Failure to follow this precaution can destroy your Arduino!
  1909. * NOTE: A separate 5V power supply is required! The Neopixel LED needs
  1910. * more current than the Arduino 5V linear regulator can produce.
  1911. * *** CAUTION ***
  1912. *
  1913. * LED Type. Enable only one of the following two options.
  1914. *
  1915. */
  1916. //#define RGB_LED
  1917. //#define RGBW_LED
  1918. #if EITHER(RGB_LED, RGBW_LED)
  1919. //#define RGB_LED_R_PIN 34
  1920. //#define RGB_LED_G_PIN 43
  1921. //#define RGB_LED_B_PIN 35
  1922. //#define RGB_LED_W_PIN -1
  1923. #endif
  1924. // Support for Adafruit Neopixel LED driver
  1925. //#define NEOPIXEL_LED
  1926. #if ENABLED(NEOPIXEL_LED)
  1927. #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
  1928. #define NEOPIXEL_PIN 4 // LED driving pin
  1929. //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
  1930. //#define NEOPIXEL2_PIN 5
  1931. #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
  1932. #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
  1933. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
  1934. //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
  1935. // Use a single Neopixel LED for static (background) lighting
  1936. //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use
  1937. //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
  1938. #endif
  1939. /**
  1940. * Printer Event LEDs
  1941. *
  1942. * During printing, the LEDs will reflect the printer status:
  1943. *
  1944. * - Gradually change from blue to violet as the heated bed gets to target temp
  1945. * - Gradually change from violet to red as the hotend gets to temperature
  1946. * - Change to white to illuminate work surface
  1947. * - Change to green once print has finished
  1948. * - Turn off after the print has finished and the user has pushed a button
  1949. */
  1950. #if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  1951. #define PRINTER_EVENT_LEDS
  1952. #endif
  1953. /**
  1954. * R/C SERVO support
  1955. * Sponsored by TrinityLabs, Reworked by codexmas
  1956. */
  1957. /**
  1958. * Number of servos
  1959. *
  1960. * For some servo-related options NUM_SERVOS will be set automatically.
  1961. * Set this manually if there are extra servos needing manual control.
  1962. * Leave undefined or set to 0 to entirely disable the servo subsystem.
  1963. */
  1964. //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
  1965. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
  1966. // 300ms is a good value but you can try less delay.
  1967. // If the servo can't reach the requested position, increase it.
  1968. #define SERVO_DELAY { 300 }
  1969. // Only power servos during movement, otherwise leave off to prevent jitter
  1970. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  1971. // Allow servo angle to be edited and saved to EEPROM
  1972. //#define EDITABLE_SERVO_ANGLES