marlin/Marlin/temperature.cpp

/*
  temperature.c - temperature control
  Part of Marlin
  
 Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.
 
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

/*
 This firmware is a mashup between Sprinter and grbl.
  (https://github.com/kliment/Sprinter)
  (https://github.com/simen/grbl/tree)
 
 It has preliminary support for Matthew Roberts advance algorithm 
    http://reprap.org/pipermail/reprap-dev/2011-May/003323.html

 This firmware is optimized for gen6 electronics.
 */
#include <avr/pgmspace.h>

#include "fastio.h"
#include "Configuration.h"
#include "pins.h"
#include "Marlin.h"
#include "ultralcd.h"
#include "temperature.h"
#include "watchdog.h"

//===========================================================================
//=============================public variables============================
//===========================================================================
int target_raw[3] = {0, 0, 0};
int current_raw[3] = {0, 0, 0};

#ifdef PIDTEMP
  
  // probably used external
  float HeaterPower;
  float pid_setpoint = 0.0;

  
  float Kp=DEFAULT_Kp;
  float Ki=DEFAULT_Ki;
  float Kd=DEFAULT_Kd;
  #ifdef PID_ADD_EXTRUSION_RATE
    float Kc=DEFAULT_Kc;
  #endif
#endif //PIDTEMP
  
  
//===========================================================================
//=============================private variables============================
//===========================================================================
static bool temp_meas_ready = false;

static unsigned long previous_millis_heater, previous_millis_bed_heater;

#ifdef PIDTEMP
  //static cannot be external:
  static float temp_iState = 0;
  static float temp_dState = 0;
  static float pTerm;
  static float iTerm;
  static float dTerm;
  //int output;
  static float pid_error;
  static float temp_iState_min;
  static float temp_iState_max;
  static float pid_input;
  static float pid_output;
  static bool pid_reset;
 
#endif //PIDTEMP
  
#ifdef WATCHPERIOD
  static int watch_raw[3] = {-1000,-1000,-1000};
  static unsigned long watchmillis = 0;
#endif //WATCHPERIOD

// Init min and max temp with extreme values to prevent false errors during startup
  static int minttemp_0   = 0;
  static int maxttemp_0   = 16383;
  static int minttemp_1   = 0;
  static int maxttemp_1   = 16383;
  static int bed_minttemp = 0;
  static int bed_maxttemp = 16383;

//===========================================================================
//=============================functions         ============================
//===========================================================================
  
void updatePID()
{
#ifdef PIDTEMP
  temp_iState_max = PID_INTEGRAL_DRIVE_MAX / Ki;
#endif
}
  
void manage_heater()
{
  #ifdef USE_WATCHDOG
    wd_reset();
  #endif
  
  float pid_input;
  float pid_output;
  if(temp_meas_ready != true)   //better readability
    return; 

  CRITICAL_SECTION_START;
    temp_meas_ready = false;
  CRITICAL_SECTION_END;

  #ifdef PIDTEMP
    pid_input = analog2temp(current_raw[TEMPSENSOR_HOTEND_0]);

    #ifndef PID_OPENLOOP
        pid_error = pid_setpoint - pid_input;
        if(pid_error > 10){
          pid_output = PID_MAX;
          pid_reset = true;
        }
        else if(pid_error < -10) {
          pid_output = 0;
          pid_reset = true;
        }
        else {
          if(pid_reset == true) {
            temp_iState = 0.0;
            pid_reset = false;
          }
          pTerm = Kp * pid_error;
          temp_iState += pid_error;
          temp_iState = constrain(temp_iState, temp_iState_min, temp_iState_max);
          iTerm = Ki * temp_iState;
          //K1 defined in Configuration.h in the PID settings
          #define K2 (1.0-K1)
          dTerm = (Kd * (pid_input - temp_dState))*K2 + (K1 * dTerm);
          temp_dState = pid_input;
//          #ifdef PID_ADD_EXTRUSION_RATE
//            pTerm+=Kc*current_block->speed_e; //additional heating if extrusion speed is high
//          #endif
          pid_output = constrain(pTerm + iTerm - dTerm, 0, PID_MAX);
          
        }
    #endif //PID_OPENLOOP
    #ifdef PID_DEBUG
     //SERIAL_ECHOLN(" PIDDEBUG Input "<<pid_input<<" Output "<<pid_output" pTerm "<<pTerm<<" iTerm "<<iTerm<<" dTerm "<<dTerm);  
    #endif //PID_DEBUG
    HeaterPower=pid_output;
    // Check if temperature is within the correct range
    if((current_raw[TEMPSENSOR_HOTEND_0] > minttemp_0) && (current_raw[TEMPSENSOR_HOTEND_0] < maxttemp_0)) {
      analogWrite(HEATER_0_PIN, pid_output);
    }
    else {
      analogWrite(HEATER_0_PIN, 0);
    }
  #endif //PIDTEMP

  #ifndef PIDTEMP
    // Check if temperature is within the correct range
    if((current_raw[TEMPSENSOR_HOTEND_0] > minttemp_0) && (current_raw[TEMPSENSOR_HOTEND_0] < maxttemp_0)) {
      if(current_raw[TEMPSENSOR_HOTEND_0] >= target_raw[TEMPSENSOR_HOTEND_0]) {
        WRITE(HEATER_0_PIN,LOW);
      }
      else {
        WRITE(HEATER_0_PIN,HIGH);
      }
    }
    else {
      WRITE(HEATER_0_PIN,LOW);
    }    
  #endif
    
  if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL)
    return;
  previous_millis_bed_heater = millis();
  
  #if TEMP_1_PIN > -1
    // Check if temperature is within the correct range
    if((current_raw[TEMPSENSOR_BED] > bed_minttemp) && (current_raw[TEMPSENSOR_BED] < bed_maxttemp)) {
      if(current_raw[TEMPSENSOR_BED] >= target_raw[TEMPSENSOR_BED])
      {
        WRITE(HEATER_1_PIN,LOW);
      }
      else 
      {
        WRITE(HEATER_1_PIN,HIGH);
      }
    }
    else {
      WRITE(HEATER_1_PIN,LOW);
    }  
  #endif
}

#define PGM_RD_W(x)   (short)pgm_read_word(&x)
// Takes hot end temperature value as input and returns corresponding raw value. 
// For a thermistor, it uses the RepRap thermistor temp table.
// This is needed because PID in hydra firmware hovers around a given analog value, not a temp value.
// This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware.
int temp2analog(int celsius) {
  #ifdef HEATER_0_USES_THERMISTOR
    int raw = 0;
    byte i;

    for (i=1; i<NUMTEMPS_HEATER_0; i++)
    {
      if (PGM_RD_W(heater_0_temptable[i][1]) < celsius)
      {
        raw = PGM_RD_W(heater_0_temptable[i-1][0]) + 
          (celsius - PGM_RD_W(heater_0_temptable[i-1][1])) * 
          (PGM_RD_W(heater_0_temptable[i][0]) - PGM_RD_W(heater_0_temptable[i-1][0])) /
          (PGM_RD_W(heater_0_temptable[i][1]) - PGM_RD_W(heater_0_temptable[i-1][1]));  
        break;
      }
    }

    // Overflow: Set to last value in the table
    if (i == NUMTEMPS_HEATER_0) raw = PGM_RD_W(heater_0_temptable[i-1][0]);

    return (1023 * OVERSAMPLENR) - raw;
  #elif defined HEATER_0_USES_AD595
    return celsius * (1024.0 / (5.0 * 100.0) ) * OVERSAMPLENR;
  #endif
}

// Takes bed temperature value as input and returns corresponding raw value. 
// For a thermistor, it uses the RepRap thermistor temp table.
// This is needed because PID in hydra firmware hovers around a given analog value, not a temp value.
// This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware.
int temp2analogBed(int celsius) {
  #ifdef BED_USES_THERMISTOR

    int raw = 0;
    byte i;
    
    for (i=1; i<BNUMTEMPS; i++)
    {
      if (PGM_RD_W(bedtemptable[i][1]) < celsius)
      {
        raw = PGM_RD_W(bedtemptable[i-1][0]) + 
          (celsius - PGM_RD_W(bedtemptable[i-1][1])) * 
          (PGM_RD_W(bedtemptable[i][0]) - PGM_RD_W(bedtemptable[i-1][0])) /
          (PGM_RD_W(bedtemptable[i][1]) - PGM_RD_W(bedtemptable[i-1][1]));
      
        break;
      }
    }

    // Overflow: Set to last value in the table
    if (i == BNUMTEMPS) raw = PGM_RD_W(bedtemptable[i-1][0]);

    return (1023 * OVERSAMPLENR) - raw;
  #elif defined BED_USES_AD595
    return lround(celsius * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) );
  #endif
}

// Derived from RepRap FiveD extruder::getTemperature()
// For hot end temperature measurement.
float analog2temp(int raw) {
  #ifdef HEATER_0_USES_THERMISTOR
    float celsius = 0;
    byte i;  
    raw = (1023 * OVERSAMPLENR) - raw;
    for (i=1; i<NUMTEMPS_HEATER_0; i++)
    {
      if (PGM_RD_W(heater_0_temptable[i][0]) > raw)
      {
        celsius  = PGM_RD_W(heater_0_temptable[i-1][1]) + 
          (raw - PGM_RD_W(heater_0_temptable[i-1][0])) * 
          (float)(PGM_RD_W(heater_0_temptable[i][1]) - PGM_RD_W(heater_0_temptable[i-1][1])) /
          (float)(PGM_RD_W(heater_0_temptable[i][0]) - PGM_RD_W(heater_0_temptable[i-1][0]));
        break;
      }
    }

    // Overflow: Set to last value in the table
    if (i == NUMTEMPS_HEATER_0) celsius = PGM_RD_W(heater_0_temptable[i-1][1]);

    return celsius;
  #elif defined HEATER_0_USES_AD595
    return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR;
  #endif
}

// Derived from RepRap FiveD extruder::getTemperature()
// For bed temperature measurement.
float analog2tempBed(int raw) {
  #ifdef BED_USES_THERMISTOR
    int celsius = 0;
    byte i;

    raw = (1023 * OVERSAMPLENR) - raw;

    for (i=1; i<BNUMTEMPS; i++)
    {
      if (PGM_RD_W(bedtemptable[i][0]) > raw)
      {
        celsius  = PGM_RD_W(bedtemptable[i-1][1]) + 
          (raw - PGM_RD_W(bedtemptable[i-1][0])) * 
          (PGM_RD_W(bedtemptable[i][1]) - PGM_RD_W(bedtemptable[i-1][1])) /
          (PGM_RD_W(bedtemptable[i][0]) - PGM_RD_W(bedtemptable[i-1][0]));

        break;
      }
    }

    // Overflow: Set to last value in the table
    if (i == BNUMTEMPS) celsius = PGM_RD_W(bedtemptable[i-1][1]);

    return celsius;
    
  #elif defined BED_USES_AD595
    return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR;
  #endif
}

void tp_init()
{
  #if (HEATER_0_PIN > -1) 
    SET_OUTPUT(HEATER_0_PIN);
  #endif  
  #if (HEATER_1_PIN > -1) 
    SET_OUTPUT(HEATER_1_PIN);
  #endif  
  #if (HEATER_2_PIN > -1) 
    SET_OUTPUT(HEATER_2_PIN);
  #endif  

  #ifdef PIDTEMP
    temp_iState_min = 0.0;
    temp_iState_max = PID_INTEGRAL_DRIVE_MAX / Ki;
  #endif //PIDTEMP

  // Set analog inputs
  ADCSRA = 1<<ADEN | 1<<ADSC | 1<<ADIF | 0x07;
  DIDR0 = 0;
  #ifdef DIDR2
    DIDR2 = 0;
  #endif
  #if (TEMP_0_PIN > -1)
    #if TEMP_0_PIN < 8
       DIDR0 |= 1 << TEMP_0_PIN; 
    #else
       DIDR2 |= 1<<(TEMP_0_PIN - 8); 
       ADCSRB = 1<<MUX5;
    #endif
  #endif
  #if (TEMP_1_PIN > -1)
    #if TEMP_1_PIN < 8
       DIDR0 |= 1<<TEMP_1_PIN; 
    #else
       DIDR2 |= 1<<(TEMP_1_PIN - 8); 
       ADCSRB = 1<<MUX5;
    #endif
  #endif
  #if (TEMP_2_PIN > -1)
    #if TEMP_2_PIN < 8
       DIDR0 |= 1 << TEMP_2_PIN; 
    #else
       DIDR2 = 1<<(TEMP_2_PIN - 8); 
       ADCSRB = 1<<MUX5;
    #endif
  #endif
  
  // Use timer0 for temperature measurement
  // Interleave temperature interrupt with millies interrupt
  OCR0B = 128;
  TIMSK0 |= (1<<OCIE0B);  
  
  // Wait for temperature measurement to settle
  delay(200);

#ifdef HEATER_0_MINTEMP
  minttemp_0 = temp2analog(HEATER_0_MINTEMP);
#endif //MINTEMP
#ifdef HEATER_0_MAXTEMP
  maxttemp_0 = temp2analog(HEATER_0_MAXTEMP);
#endif //MAXTEMP

#ifdef HEATER_1_MINTEMP
  minttemp_1 = temp2analog(HEATER_1_MINTEMP);
#endif //MINTEMP
#ifdef HEATER_1_MAXTEMP
  maxttemp_1 = temp2analog(HEATER_1_MAXTEMP);
#endif //MAXTEMP

#ifdef BED_MINTEMP
  bed_minttemp = temp2analog(BED_MINTEMP);
#endif //BED_MINTEMP
#ifdef BED_MAXTEMP
  bed_maxttemp = temp2analog(BED_MAXTEMP);
#endif //BED_MAXTEMP
}



void setWatch() 
{  
#ifdef WATCHPERIOD
  if(isHeatingHotend0())
  {
    watchmillis = max(1,millis());
    watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0];
  }
  else
  {
    watchmillis = 0;
  } 
#endif 
}


void disable_heater()
{
  #if TEMP_0_PIN > -1
  target_raw[0]=0;
   #if HEATER_0_PIN > -1  
     digitalWrite(HEATER_0_PIN,LOW);
   #endif
  #endif
     
  #if TEMP_1_PIN > -1
    target_raw[1]=0;
    #if HEATER_1_PIN > -1 
      digitalWrite(HEATER_1_PIN,LOW);
    #endif
  #endif
      
  #if TEMP_2_PIN > -1
    target_raw[2]=0;
    #if HEATER_2_PIN > -1  
      digitalWrite(HEATER_2_PIN,LOW);
    #endif
  #endif 
}

// Timer 0 is shared with millies
ISR(TIMER0_COMPB_vect)
{
  //these variables are only accesible from the ISR, but static, so they don't loose their value
  static unsigned char temp_count = 0;
  static unsigned long raw_temp_0_value = 0;
  static unsigned long raw_temp_1_value = 0;
  static unsigned long raw_temp_2_value = 0;
  static unsigned char temp_state = 0;
  
  switch(temp_state) {
    case 0: // Prepare TEMP_0
      #if (TEMP_0_PIN > -1)
        #if TEMP_0_PIN > 7
          ADCSRB = 1<<MUX5;
        #endif
        ADMUX = ((1 << REFS0) | (TEMP_0_PIN & 0x07));
        ADCSRA |= 1<<ADSC; // Start conversion
      #endif
      #ifdef ULTIPANEL
        buttons_check();
      #endif
      temp_state = 1;
      break;
    case 1: // Measure TEMP_0
      #if (TEMP_0_PIN > -1)
        raw_temp_0_value += ADC;
      #endif
      temp_state = 2;
      break;
    case 2: // Prepare TEMP_1
      #if (TEMP_1_PIN > -1)
        #if TEMP_1_PIN > 7
          ADCSRB = 1<<MUX5;
        #endif
        ADMUX = ((1 << REFS0) | (TEMP_1_PIN & 0x07));
        ADCSRA |= 1<<ADSC; // Start conversion
      #endif
      #ifdef ULTIPANEL
        buttons_check();
      #endif
      temp_state = 3;
      break;
    case 3: // Measure TEMP_1
      #if (TEMP_1_PIN > -1)
        raw_temp_1_value += ADC;
      #endif
      temp_state = 4;
      break;
    case 4: // Prepare TEMP_2
      #if (TEMP_2_PIN > -1)
        #if TEMP_2_PIN > 7
          ADCSRB = 1<<MUX5;
        #endif
        ADMUX = ((1 << REFS0) | (TEMP_2_PIN & 0x07));
        ADCSRA |= 1<<ADSC; // Start conversion
      #endif
      #ifdef ULTIPANEL
        buttons_check();
      #endif
      temp_state = 5;
      break;
    case 5: // Measure TEMP_2
      #if (TEMP_2_PIN > -1)
        raw_temp_2_value += ADC;
      #endif
      temp_state = 0;
      temp_count++;
      break;
    default:
      SERIAL_ERROR_START;
      SERIAL_ERRORLNPGM("Temp measurement error!");
      break;
  }
    
  if(temp_count >= 16) // 6 ms * 16 = 96ms.
  {
    #ifdef HEATER_0_USES_AD595
      current_raw[0] = raw_temp_0_value;
    #else
      current_raw[0] = 16383 - raw_temp_0_value;
    #endif
    
    #ifdef HEATER_1_USES_AD595
      current_raw[2] = raw_temp_2_value;
    #else
      current_raw[2] = 16383 - raw_temp_2_value;
    #endif
    
    #ifdef BED_USES_AD595
      current_raw[1] = raw_temp_1_value;
    #else
      current_raw[1] = 16383 - raw_temp_1_value;
    #endif
    
    temp_meas_ready = true;
    temp_count = 0;
    raw_temp_0_value = 0;
    raw_temp_1_value = 0;
    raw_temp_2_value = 0;
    #ifdef HEATER_0_MAXTEMP
      #if (HEATER_0_PIN > -1)
        if(current_raw[TEMPSENSOR_HOTEND_0] >= maxttemp_0) {
          target_raw[TEMPSENSOR_HOTEND_0] = 0;
          digitalWrite(HEATER_0_PIN, 0);
          SERIAL_ERROR_START;
          SERIAL_ERRORLNPGM("Temperature extruder 0 switched off. MAXTEMP triggered !!");
          kill();
        }
      #endif
    #endif
  #ifdef HEATER_1_MAXTEMP
    #if (HEATER_1_PIN > -1)
      if(current_raw[TEMPSENSOR_HOTEND_1] >= maxttemp_1) {
        target_raw[TEMPSENSOR_HOTEND_1] = 0;
        digitalWrite(HEATER_2_PIN, 0);
        SERIAL_ERROR_START;
        SERIAL_ERRORLNPGM("Temperature extruder 1 switched off. MAXTEMP triggered !!");
        kill();
      }
    #endif
  #endif //MAXTEMP
  
  #ifdef HEATER_0_MINTEMP
    #if (HEATER_0_PIN > -1)
      if(current_raw[TEMPSENSOR_HOTEND_0] <= minttemp_0) {
        target_raw[TEMPSENSOR_HOTEND_0] = 0;
        digitalWrite(HEATER_0_PIN, 0);
        SERIAL_ERROR_START;
        SERIAL_ERRORLNPGM("Temperature extruder 0 switched off. MINTEMP triggered !!");
        kill();
      }
    #endif
  #endif
  
  #ifdef HEATER_1_MINTEMP
    #if (HEATER_2_PIN > -1)
      if(current_raw[TEMPSENSOR_HOTEND_1] <= minttemp_1) {
        target_raw[TEMPSENSOR_HOTEND_1] = 0;
        digitalWrite(HEATER_2_PIN, 0);
        SERIAL_ERROR_START;
        SERIAL_ERRORLNPGM("Temperature extruder 1 switched off. MINTEMP triggered !!");
        kill();
      }
    #endif
  #endif //MAXTEMP
  
  #ifdef BED_MINTEMP
    #if (HEATER_1_PIN > -1)
      if(current_raw[1] <= bed_minttemp) {
        target_raw[1] = 0;
        digitalWrite(HEATER_1_PIN, 0);
        SERIAL_ERROR_START;
        SERIAL_ERRORLNPGM("Temperatur heated bed switched off. MINTEMP triggered !!");
        kill();
      }
    #endif
  #endif
  
  #ifdef BED_MAXTEMP
    #if (HEATER_1_PIN > -1)
      if(current_raw[1] >= bed_maxttemp) {
        target_raw[1] = 0;
        digitalWrite(HEATER_1_PIN, 0);
        SERIAL_ERROR_START;
        SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!");
        kill();
      }
    #endif
  #endif
  }
}