12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- * Copyright (c) 2017 Victor Perez
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Fast I/O interfaces for STM32
- * These use GPIO register access for fast port manipulation.
- */
-
- // ------------------------
- // Public Variables
- // ------------------------
-
- extern GPIO_TypeDef * FastIOPortMap[];
-
- // ------------------------
- // Public functions
- // ------------------------
-
- void FastIO_init(); // Must be called before using fast io macros
- #define FASTIO_INIT() FastIO_init()
-
- // ------------------------
- // Defines
- // ------------------------
-
- #define _BV32(b) (1UL << (b))
-
- #ifndef PWM
- #define PWM OUTPUT
- #endif
-
- #if defined(STM32F0xx) || defined(STM32F1xx) || defined(STM32F3xx) || defined(STM32L0xx) || defined(STM32L4xx)
- #define _WRITE(IO, V) do { \
- if (V) FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
- else FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BRR = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
- }while(0)
- #else
- #define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO)) + ((V) ? 0 : 16)))
- #endif
-
- #define _READ(IO) bool(READ_BIT(FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->IDR, _BV32(STM_PIN(digitalPinToPinName(IO)))))
- #define _TOGGLE(IO) TBI32(FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->ODR, STM_PIN(digitalPinToPinName(IO)))
-
- #define _GET_MODE(IO)
- #define _SET_MODE(IO,M) pinMode(IO, M)
- #define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) //!< Output Push Pull Mode & GPIO_NOPULL
- #define _SET_OUTPUT_OD(IO) pinMode(IO, OUTPUT_OPEN_DRAIN)
-
- #define WRITE(IO,V) _WRITE(IO,V)
- #define READ(IO) _READ(IO)
- #define TOGGLE(IO) _TOGGLE(IO)
-
- #define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
- #define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
-
- #define SET_INPUT(IO) _SET_MODE(IO, INPUT) //!< Input Floating Mode
- #define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) //!< Input with Pull-up activation
- #define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) //!< Input with Pull-down activation
- #define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
- #define SET_PWM(IO) _SET_MODE(IO, PWM)
-
- #define IS_INPUT(IO)
- #define IS_OUTPUT(IO)
-
- #define PWM_PIN(P) digitalPinHasPWM(P)
- #define NO_COMPILE_TIME_PWM
-
- // digitalRead/Write wrappers
- #define extDigitalRead(IO) digitalRead(IO)
- #define extDigitalWrite(IO,V) digitalWrite(IO,V)
|