marlin/Marlin/pins_MINIRAMBO.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Mini-Rambo pin assignments
 */

#ifndef __AVR_ATmega2560__
  #error "Oops!  Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
#endif

#define LARGE_FLASH         true

#define X_STEP_PIN          37
#define X_DIR_PIN           48
#define X_MIN_PIN           12
#define X_MAX_PIN           30
#define X_ENABLE_PIN        29
#define X_MS1_PIN           40
#define X_MS2_PIN           41

#define Y_STEP_PIN          36
#define Y_DIR_PIN           49
#define Y_MIN_PIN           11
#define Y_MAX_PIN           24
#define Y_ENABLE_PIN        28
#define Y_MS1_PIN           69
#define Y_MS2_PIN           39

#define Z_STEP_PIN          35
#define Z_DIR_PIN           47
#define Z_MIN_PIN           10
#define Z_MAX_PIN           23
#define Z_ENABLE_PIN        27
#define Z_MS1_PIN           68
#define Z_MS2_PIN           67

#define HEATER_BED_PIN       4
#define TEMP_BED_PIN         2

#define HEATER_0_PIN         3
#define TEMP_0_PIN           0

#define HEATER_1_PIN         7
#define TEMP_1_PIN           1

#if ENABLED(BARICUDA)
  #define HEATER_2_PIN       6
#endif

#define E0_STEP_PIN         34
#define E0_DIR_PIN          43
#define E0_ENABLE_PIN       26
#define E0_MS1_PIN          65
#define E0_MS2_PIN          66

#define E1_STEP_PIN         -1
#define E1_DIR_PIN          -1
#define E1_ENABLE_PIN       -1

#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN  45
#define MOTOR_CURRENT_PWM_E_PIN  44
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT  {1300, 1300, 1250}
#define SDSS                53
#define LED_PIN             13
#define FAN_PIN              8
#define FAN_1_PIN            6

#if ENABLED(ULTRA_LCD)

  #define KILL_PIN          32

  #if ENABLED(NEWPANEL)

    #define BEEPER_PIN      84  // Beeper on AUX-4
    #define LCD_PINS_RS     82
    #define LCD_PINS_ENABLE 18
    #define LCD_PINS_D4     19
    #define LCD_PINS_D5     70
    #define LCD_PINS_D6     85
    #define LCD_PINS_D7     71

    //buttons are directly attached using AUX-2
    #define BTN_EN1         14
    #define BTN_EN2         72
    #define BTN_ENC          9  // the click

    #define SD_DETECT_PIN   15

  #endif //NEWPANEL
#endif //ULTRA_LCD