My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.

Configuration_adv.h 131KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Configuration_adv.h
  25. *
  26. * Advanced settings.
  27. * Only change these if you know exactly what you're doing.
  28. * Some of these settings can damage your printer if improperly set!
  29. *
  30. * Basic settings can be found in Configuration.h
  31. *
  32. */
  33. #define CONFIGURATION_ADV_H_VERSION 020005
  34. // @section temperature
  35. //===========================================================================
  36. //=============================Thermal Settings ============================
  37. //===========================================================================
  38. //
  39. // Custom Thermistor 1000 parameters
  40. //
  41. #if TEMP_SENSOR_0 == 1000
  42. #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  43. #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  44. #define HOTEND0_BETA 3950 // Beta value
  45. #endif
  46. #if TEMP_SENSOR_1 == 1000
  47. #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  48. #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  49. #define HOTEND1_BETA 3950 // Beta value
  50. #endif
  51. #if TEMP_SENSOR_2 == 1000
  52. #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  53. #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  54. #define HOTEND2_BETA 3950 // Beta value
  55. #endif
  56. #if TEMP_SENSOR_3 == 1000
  57. #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  58. #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  59. #define HOTEND3_BETA 3950 // Beta value
  60. #endif
  61. #if TEMP_SENSOR_4 == 1000
  62. #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  63. #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  64. #define HOTEND4_BETA 3950 // Beta value
  65. #endif
  66. #if TEMP_SENSOR_5 == 1000
  67. #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  68. #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  69. #define HOTEND5_BETA 3950 // Beta value
  70. #endif
  71. #if TEMP_SENSOR_6 == 1000
  72. #define HOTEND6_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  73. #define HOTEND6_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  74. #define HOTEND6_BETA 3950 // Beta value
  75. #endif
  76. #if TEMP_SENSOR_7 == 1000
  77. #define HOTEND7_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  78. #define HOTEND7_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  79. #define HOTEND7_BETA 3950 // Beta value
  80. #endif
  81. #if TEMP_SENSOR_BED == 1000
  82. #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  83. #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  84. #define BED_BETA 3950 // Beta value
  85. #endif
  86. #if TEMP_SENSOR_CHAMBER == 1000
  87. #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  88. #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
  89. #define CHAMBER_BETA 3950 // Beta value
  90. #endif
  91. //
  92. // Hephestos 2 24V heated bed upgrade kit.
  93. // https://store.bq.com/en/heated-bed-kit-hephestos2
  94. //
  95. //#define HEPHESTOS2_HEATED_BED_KIT
  96. #if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
  97. #undef TEMP_SENSOR_BED
  98. #define TEMP_SENSOR_BED 70
  99. #define HEATER_BED_INVERTING true
  100. #endif
  101. /**
  102. * Heated Chamber settings
  103. */
  104. #if TEMP_SENSOR_CHAMBER
  105. #define CHAMBER_MINTEMP 5
  106. #define CHAMBER_MAXTEMP 60
  107. #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
  108. //#define CHAMBER_LIMIT_SWITCHING
  109. //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
  110. //#define HEATER_CHAMBER_INVERTING false
  111. #endif
  112. #if DISABLED(PIDTEMPBED)
  113. #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
  114. #if ENABLED(BED_LIMIT_SWITCHING)
  115. #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
  116. #endif
  117. #endif
  118. /**
  119. * Thermal Protection provides additional protection to your printer from damage
  120. * and fire. Marlin always includes safe min and max temperature ranges which
  121. * protect against a broken or disconnected thermistor wire.
  122. *
  123. * The issue: If a thermistor falls out, it will report the much lower
  124. * temperature of the air in the room, and the the firmware will keep
  125. * the heater on.
  126. *
  127. * The solution: Once the temperature reaches the target, start observing.
  128. * If the temperature stays too far below the target (hysteresis) for too
  129. * long (period), the firmware will halt the machine as a safety precaution.
  130. *
  131. * If you get false positives for "Thermal Runaway", increase
  132. * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  133. */
  134. #if ENABLED(THERMAL_PROTECTION_HOTENDS)
  135. #define THERMAL_PROTECTION_PERIOD 40 // Seconds
  136. #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
  137. //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
  138. #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
  139. //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
  140. #endif
  141. /**
  142. * Whenever an M104, M109, or M303 increases the target temperature, the
  143. * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
  144. * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
  145. * requires a hard reset. This test restarts with any M104/M109/M303, but only
  146. * if the current temperature is far enough below the target for a reliable
  147. * test.
  148. *
  149. * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
  150. * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
  151. * below 2.
  152. */
  153. #define WATCH_TEMP_PERIOD 20 // Seconds
  154. #define WATCH_TEMP_INCREASE 2 // Degrees Celsius
  155. #endif
  156. /**
  157. * Thermal Protection parameters for the bed are just as above for hotends.
  158. */
  159. #if ENABLED(THERMAL_PROTECTION_BED)
  160. #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
  161. #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
  162. /**
  163. * As described above, except for the bed (M140/M190/M303).
  164. */
  165. #define WATCH_BED_TEMP_PERIOD 60 // Seconds
  166. #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
  167. #endif
  168. /**
  169. * Thermal Protection parameters for the heated chamber.
  170. */
  171. #if ENABLED(THERMAL_PROTECTION_CHAMBER)
  172. #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds
  173. #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius
  174. /**
  175. * Heated chamber watch settings (M141/M191).
  176. */
  177. #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds
  178. #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
  179. #endif
  180. #if ENABLED(PIDTEMP)
  181. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
  182. // A well-chosen Kc value should add just enough power to melt the increased material volume.
  183. //#define PID_EXTRUSION_SCALING
  184. #if ENABLED(PID_EXTRUSION_SCALING)
  185. #define DEFAULT_Kc (100) // heating power = Kc * e_speed
  186. #define LPQ_MAX_LEN 50
  187. #endif
  188. /**
  189. * Add an experimental additional term to the heater power, proportional to the fan speed.
  190. * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
  191. * You can either just add a constant compensation with the DEFAULT_Kf value
  192. * or follow the instruction below to get speed-dependent compensation.
  193. *
  194. * Constant compensation (use only with fanspeeds of 0% and 100%)
  195. * ---------------------------------------------------------------------
  196. * A good starting point for the Kf-value comes from the calculation:
  197. * kf = (power_fan * eff_fan) / power_heater * 255
  198. * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater.
  199. *
  200. * Example:
  201. * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8
  202. * Kf = (2.4W * 0.8) / 40W * 255 = 12.24
  203. *
  204. * Fan-speed dependent compensation
  205. * --------------------------------
  206. * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%).
  207. * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled.
  208. * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature
  209. * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big.
  210. * 2. Note the Kf-value for fan-speed at 100%
  211. * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving.
  212. * 4. Repeat step 1. and 2. for this fan speed.
  213. * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in
  214. * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED
  215. */
  216. //#define PID_FAN_SCALING
  217. #if ENABLED(PID_FAN_SCALING)
  218. //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION
  219. #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION)
  220. // The alternative definition is used for an easier configuration.
  221. // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED.
  222. // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly.
  223. #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf
  224. #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf
  225. #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING
  226. #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED)
  227. #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0
  228. #else
  229. #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed)
  230. #define DEFAULT_Kf 10 // A constant value added to the PID-tuner
  231. #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING
  232. #endif
  233. #endif
  234. #endif
  235. /**
  236. * Automatic Temperature Mode
  237. *
  238. * Dynamically adjust the hotend target temperature based on planned E moves.
  239. *
  240. * (Contrast with PID_EXTRUSION_SCALING, which tracks E movement and adjusts PID
  241. * behavior using an additional kC value.)
  242. *
  243. * Autotemp is calculated by (mintemp + factor * mm_per_sec), capped to maxtemp.
  244. *
  245. * Enable Autotemp Mode with M104/M109 F<factor> S<mintemp> B<maxtemp>.
  246. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL).
  247. */
  248. #define AUTOTEMP
  249. #if ENABLED(AUTOTEMP)
  250. #define AUTOTEMP_OLDWEIGHT 0.98
  251. // Turn on AUTOTEMP on M104/M109 by default using proportions set here
  252. //#define AUTOTEMP_PROPORTIONAL
  253. #if ENABLED(AUTOTEMP_PROPORTIONAL)
  254. #define AUTOTEMP_MIN_P 0 // (°C) Added to the target temperature
  255. #define AUTOTEMP_MAX_P 5 // (°C) Added to the target temperature
  256. #define AUTOTEMP_FACTOR_P 1 // Apply this F parameter by default (overridden by M104/M109 F)
  257. #endif
  258. #endif
  259. // Extra options for the M114 "Current Position" report
  260. //#define M114_DETAIL // Use 'M114` for details to check planner calculations
  261. //#define M114_REALTIME // Real current position based on forward kinematics
  262. //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed.
  263. // Show Temperature ADC value
  264. // Enable for M105 to include ADC values read from temperature sensors.
  265. //#define SHOW_TEMP_ADC_VALUES
  266. /**
  267. * High Temperature Thermistor Support
  268. *
  269. * Thermistors able to support high temperature tend to have a hard time getting
  270. * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
  271. * will probably be caught when the heating element first turns on during the
  272. * preheating process, which will trigger a min_temp_error as a safety measure
  273. * and force stop everything.
  274. * To circumvent this limitation, we allow for a preheat time (during which,
  275. * min_temp_error won't be triggered) and add a min_temp buffer to handle
  276. * aberrant readings.
  277. *
  278. * If you want to enable this feature for your hotend thermistor(s)
  279. * uncomment and set values > 0 in the constants below
  280. */
  281. // The number of consecutive low temperature errors that can occur
  282. // before a min_temp_error is triggered. (Shouldn't be more than 10.)
  283. //#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
  284. // The number of milliseconds a hotend will preheat before starting to check
  285. // the temperature. This value should NOT be set to the time it takes the
  286. // hot end to reach the target temperature, but the time it takes to reach
  287. // the minimum temperature your thermistor can read. The lower the better/safer.
  288. // This shouldn't need to be more than 30 seconds (30000)
  289. //#define MILLISECONDS_PREHEAT_TIME 0
  290. // @section extruder
  291. // Extruder runout prevention.
  292. // If the machine is idle and the temperature over MINTEMP
  293. // then extrude some filament every couple of SECONDS.
  294. //#define EXTRUDER_RUNOUT_PREVENT
  295. #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
  296. #define EXTRUDER_RUNOUT_MINTEMP 190
  297. #define EXTRUDER_RUNOUT_SECONDS 30
  298. #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
  299. #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
  300. #endif
  301. // @section temperature
  302. // Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
  303. // The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
  304. #define TEMP_SENSOR_AD595_OFFSET 0.0
  305. #define TEMP_SENSOR_AD595_GAIN 1.0
  306. #define TEMP_SENSOR_AD8495_OFFSET 0.0
  307. #define TEMP_SENSOR_AD8495_GAIN 1.0
  308. /**
  309. * Controller Fan
  310. * To cool down the stepper drivers and MOSFETs.
  311. *
  312. * The fan turns on automatically whenever any driver is enabled and turns
  313. * off (or reduces to idle speed) shortly after drivers are turned off.
  314. */
  315. //#define USE_CONTROLLER_FAN
  316. #if ENABLED(USE_CONTROLLER_FAN)
  317. //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
  318. //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
  319. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
  320. #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
  321. #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
  322. #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
  323. //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
  324. #if ENABLED(CONTROLLER_FAN_EDITABLE)
  325. #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
  326. #endif
  327. #endif
  328. // When first starting the main fan, run it at full speed for the
  329. // given number of milliseconds. This gets the fan spinning reliably
  330. // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
  331. //#define FAN_KICKSTART_TIME 100
  332. // Some coolers may require a non-zero "off" state.
  333. //#define FAN_OFF_PWM 1
  334. /**
  335. * PWM Fan Scaling
  336. *
  337. * Define the min/max speeds for PWM fans (as set with M106).
  338. *
  339. * With these options the M106 0-255 value range is scaled to a subset
  340. * to ensure that the fan has enough power to spin, or to run lower
  341. * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
  342. * Value 0 always turns off the fan.
  343. *
  344. * Define one or both of these to override the default 0-255 range.
  345. */
  346. //#define FAN_MIN_PWM 50
  347. //#define FAN_MAX_PWM 128
  348. /**
  349. * FAST PWM FAN Settings
  350. *
  351. * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
  352. * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
  353. * frequency as close as possible to the desired frequency.
  354. *
  355. * FAST_PWM_FAN_FREQUENCY [undefined by default]
  356. * Set this to your desired frequency.
  357. * If left undefined this defaults to F = F_CPU/(2*255*1)
  358. * i.e., F = 31.4kHz on 16MHz microcontrollers or F = 39.2kHz on 20MHz microcontrollers.
  359. * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
  360. * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
  361. *
  362. * USE_OCR2A_AS_TOP [undefined by default]
  363. * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
  364. * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
  365. * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
  366. * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
  367. * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
  368. * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
  369. */
  370. #if ENABLED(FAST_PWM_FAN)
  371. //#define FAST_PWM_FAN_FREQUENCY 31400
  372. //#define USE_OCR2A_AS_TOP
  373. #endif
  374. // @section extruder
  375. /**
  376. * Extruder cooling fans
  377. *
  378. * Extruder auto fans automatically turn on when their extruders'
  379. * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
  380. *
  381. * Your board's pins file specifies the recommended pins. Override those here
  382. * or set to -1 to disable completely.
  383. *
  384. * Multiple extruders can be assigned to the same pin in which case
  385. * the fan will turn on when any selected extruder is above the threshold.
  386. */
  387. #define E0_AUTO_FAN_PIN -1
  388. #define E1_AUTO_FAN_PIN -1
  389. #define E2_AUTO_FAN_PIN -1
  390. #define E3_AUTO_FAN_PIN -1
  391. #define E4_AUTO_FAN_PIN -1
  392. #define E5_AUTO_FAN_PIN -1
  393. #define E6_AUTO_FAN_PIN -1
  394. #define E7_AUTO_FAN_PIN -1
  395. #define CHAMBER_AUTO_FAN_PIN -1
  396. #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
  397. #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
  398. #define CHAMBER_AUTO_FAN_TEMPERATURE 30
  399. #define CHAMBER_AUTO_FAN_SPEED 255
  400. /**
  401. * Part-Cooling Fan Multiplexer
  402. *
  403. * This feature allows you to digitally multiplex the fan output.
  404. * The multiplexer is automatically switched at tool-change.
  405. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
  406. */
  407. #define FANMUX0_PIN -1
  408. #define FANMUX1_PIN -1
  409. #define FANMUX2_PIN -1
  410. /**
  411. * M355 Case Light on-off / brightness
  412. */
  413. //#define CASE_LIGHT_ENABLE
  414. #if ENABLED(CASE_LIGHT_ENABLE)
  415. //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
  416. #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
  417. #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
  418. #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
  419. //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
  420. //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
  421. //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
  422. //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
  423. #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
  424. #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
  425. #endif
  426. #endif
  427. // @section homing
  428. // If you want endstops to stay on (by default) even when not homing
  429. // enable this option. Override at any time with M120, M121.
  430. //#define ENDSTOPS_ALWAYS_ON_DEFAULT
  431. // @section extras
  432. //#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
  433. // Employ an external closed loop controller. Override pins here if needed.
  434. //#define EXTERNAL_CLOSED_LOOP_CONTROLLER
  435. #if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
  436. //#define CLOSED_LOOP_ENABLE_PIN -1
  437. //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1
  438. #endif
  439. /**
  440. * Dual Steppers / Dual Endstops
  441. *
  442. * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes.
  443. *
  444. * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to
  445. * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop
  446. * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug
  447. * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'.
  448. *
  449. * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors
  450. * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error
  451. * in X2. Dual endstop offsets can be set at runtime with 'M666 X<offset> Y<offset> Z<offset>'.
  452. */
  453. //#define X_DUAL_STEPPER_DRIVERS
  454. #if ENABLED(X_DUAL_STEPPER_DRIVERS)
  455. #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions
  456. //#define X_DUAL_ENDSTOPS
  457. #if ENABLED(X_DUAL_ENDSTOPS)
  458. #define X2_USE_ENDSTOP _XMAX_
  459. #define X2_ENDSTOP_ADJUSTMENT 0
  460. #endif
  461. #endif
  462. //#define Y_DUAL_STEPPER_DRIVERS
  463. #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
  464. #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions
  465. //#define Y_DUAL_ENDSTOPS
  466. #if ENABLED(Y_DUAL_ENDSTOPS)
  467. #define Y2_USE_ENDSTOP _YMAX_
  468. #define Y2_ENDSTOP_ADJUSTMENT 0
  469. #endif
  470. #endif
  471. //
  472. // For Z set the number of stepper drivers
  473. //
  474. #define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many
  475. #if NUM_Z_STEPPER_DRIVERS > 1
  476. //#define Z_MULTI_ENDSTOPS
  477. #if ENABLED(Z_MULTI_ENDSTOPS)
  478. #define Z2_USE_ENDSTOP _XMAX_
  479. #define Z2_ENDSTOP_ADJUSTMENT 0
  480. #if NUM_Z_STEPPER_DRIVERS >= 3
  481. #define Z3_USE_ENDSTOP _YMAX_
  482. #define Z3_ENDSTOP_ADJUSTMENT 0
  483. #endif
  484. #if NUM_Z_STEPPER_DRIVERS >= 4
  485. #define Z4_USE_ENDSTOP _ZMAX_
  486. #define Z4_ENDSTOP_ADJUSTMENT 0
  487. #endif
  488. #endif
  489. #endif
  490. /**
  491. * Dual X Carriage
  492. *
  493. * This setup has two X carriages that can move independently, each with its own hotend.
  494. * The carriages can be used to print an object with two colors or materials, or in
  495. * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
  496. * The inactive carriage is parked automatically to prevent oozing.
  497. * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
  498. * By default the X2 stepper is assigned to the first unused E plug on the board.
  499. *
  500. * The following Dual X Carriage modes can be selected with M605 S<mode>:
  501. *
  502. * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
  503. * results as long as it supports dual X-carriages. (M605 S0)
  504. *
  505. * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
  506. * that additional slicer support is not required. (M605 S1)
  507. *
  508. * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
  509. * the first X-carriage and extruder, to print 2 copies of the same object at the same time.
  510. * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
  511. * follow with M605 S2 to initiate duplicated movement.
  512. *
  513. * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
  514. * the movement of the first except the second extruder is reversed in the X axis.
  515. * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
  516. * follow with M605 S3 to initiate mirrored movement.
  517. */
  518. //#define DUAL_X_CARRIAGE
  519. #if ENABLED(DUAL_X_CARRIAGE)
  520. #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS
  521. #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage
  522. #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage
  523. #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed
  524. #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position
  525. #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS.
  526. // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
  527. // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
  528. // without modifying the firmware (through the "M218 T1 X???" command).
  529. // Remember: you should set the second extruder x-offset to 0 in your slicer.
  530. // This is the default power-up mode which can be later using M605.
  531. #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
  532. // Default x offset in duplication mode (typically set to half print bed width)
  533. #define DEFAULT_DUPLICATION_X_OFFSET 100
  534. #endif
  535. // Activate a solenoid on the active extruder with M380. Disable all with M381.
  536. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
  537. //#define EXT_SOLENOID
  538. // @section homing
  539. /**
  540. * Homing Procedure
  541. * Homing (G28) does an indefinite move towards the endstops to establish
  542. * the position of the toolhead relative to the workspace.
  543. */
  544. //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing
  545. #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump
  546. #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
  547. //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing
  548. //#define QUICK_HOME // If G28 contains XY do a diagonal move first
  549. //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
  550. //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
  551. // @section bltouch
  552. #if ENABLED(BLTOUCH)
  553. /**
  554. * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
  555. * Do not activate settings that the probe might not understand. Clones might misunderstand
  556. * advanced commands.
  557. *
  558. * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
  559. * check the wiring of the BROWN, RED and ORANGE wires.
  560. *
  561. * Note: If the trigger signal of your probe is not being recognized, it has been very often
  562. * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
  563. * like they would be with a real switch. So please check the wiring first.
  564. *
  565. * Settings for all BLTouch and clone probes:
  566. */
  567. // Safety: The probe needs time to recognize the command.
  568. // Minimum command delay (ms). Enable and increase if needed.
  569. //#define BLTOUCH_DELAY 500
  570. /**
  571. * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
  572. */
  573. // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
  574. // in special cases, like noisy or filtered input configurations.
  575. //#define BLTOUCH_FORCE_SW_MODE
  576. /**
  577. * Settings for BLTouch Smart 3.0 and 3.1
  578. * Summary:
  579. * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
  580. * - High-Speed mode
  581. * - Disable LCD voltage options
  582. */
  583. /**
  584. * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
  585. * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
  586. * If disabled, OD mode is the hard-coded default on 3.0
  587. * On startup, Marlin will compare its eeprom to this vale. If the selected mode
  588. * differs, a mode set eeprom write will be completed at initialization.
  589. * Use the option below to force an eeprom write to a V3.1 probe regardless.
  590. */
  591. //#define BLTOUCH_SET_5V_MODE
  592. /**
  593. * Safety: Activate if connecting a probe with an unknown voltage mode.
  594. * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
  595. * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
  596. * To preserve the life of the probe, use this once then turn it off and re-flash.
  597. */
  598. //#define BLTOUCH_FORCE_MODE_SET
  599. /**
  600. * Use "HIGH SPEED" mode for probing.
  601. * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
  602. * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
  603. * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
  604. */
  605. //#define BLTOUCH_HS_MODE
  606. // Safety: Enable voltage mode settings in the LCD menu.
  607. //#define BLTOUCH_LCD_VOLTAGE_MENU
  608. #endif // BLTOUCH
  609. // @section extras
  610. /**
  611. * Z Steppers Auto-Alignment
  612. * Add the G34 command to align multiple Z steppers using a bed probe.
  613. */
  614. //#define Z_STEPPER_AUTO_ALIGN
  615. #if ENABLED(Z_STEPPER_AUTO_ALIGN)
  616. // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
  617. // If not defined, probe limits will be used.
  618. // Override with 'M422 S<index> X<pos> Y<pos>'
  619. //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } }
  620. /**
  621. * Orientation for the automatically-calculated probe positions.
  622. * Override Z stepper align points with 'M422 S<index> X<pos> Y<pos>'
  623. *
  624. * 2 Steppers: (0) (1)
  625. * | | 2 |
  626. * | 1 2 | |
  627. * | | 1 |
  628. *
  629. * 3 Steppers: (0) (1) (2) (3)
  630. * | 3 | 1 | 2 1 | 2 |
  631. * | | 3 | | 3 |
  632. * | 1 2 | 2 | 3 | 1 |
  633. *
  634. * 4 Steppers: (0) (1) (2) (3)
  635. * | 4 3 | 1 4 | 2 1 | 3 2 |
  636. * | | | | |
  637. * | 1 2 | 2 3 | 3 4 | 4 1 |
  638. *
  639. */
  640. #ifndef Z_STEPPER_ALIGN_XY
  641. //#define Z_STEPPERS_ORIENTATION 0
  642. #endif
  643. // Provide Z stepper positions for more rapid convergence in bed alignment.
  644. // Requires triple stepper drivers (i.e., set NUM_Z_STEPPER_DRIVERS to 3)
  645. //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
  646. #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
  647. // Define Stepper XY positions for Z1, Z2, Z3 corresponding to
  648. // the Z screw positions in the bed carriage.
  649. // Define one position per Z stepper in stepper driver order.
  650. #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
  651. #else
  652. // Amplification factor. Used to scale the correction step up or down in case
  653. // the stepper (spindle) position is farther out than the test point.
  654. #define Z_STEPPER_ALIGN_AMP 1.0 // Use a value > 1.0 NOTE: This may cause instability!
  655. #endif
  656. // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
  657. #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
  658. #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
  659. #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
  660. #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
  661. // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
  662. // Re-homing might be more precise in reproducing the actual 'G28 Z' homing height, especially on an uneven bed.
  663. #define HOME_AFTER_G34
  664. #endif
  665. // @section motion
  666. #define AXIS_RELATIVE_MODES { false, false, false, false }
  667. // Add a Duplicate option for well-separated conjoined nozzles
  668. //#define MULTI_NOZZLE_DUPLICATION
  669. // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
  670. #define INVERT_X_STEP_PIN false
  671. #define INVERT_Y_STEP_PIN false
  672. #define INVERT_Z_STEP_PIN false
  673. #define INVERT_E_STEP_PIN false
  674. // Default stepper release if idle. Set to 0 to deactivate.
  675. // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
  676. // Time can be set by M18 and M84.
  677. #define DEFAULT_STEPPER_DEACTIVE_TIME 120
  678. #define DISABLE_INACTIVE_X true
  679. #define DISABLE_INACTIVE_Y true
  680. #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished.
  681. #define DISABLE_INACTIVE_E true
  682. #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
  683. #define DEFAULT_MINTRAVELFEEDRATE 0.0
  684. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated
  685. // Minimum time that a segment needs to take if the buffer is emptied
  686. #define DEFAULT_MINSEGMENTTIME 20000 // (ms)
  687. // Slow down the machine if the look ahead buffer is (by default) half full.
  688. // Increase the slowdown divisor for larger buffer sizes.
  689. #define SLOWDOWN
  690. #if ENABLED(SLOWDOWN)
  691. #define SLOWDOWN_DIVISOR 2
  692. #endif
  693. /**
  694. * XY Frequency limit
  695. * Reduce resonance by limiting the frequency of small zigzag infill moves.
  696. * See http://hydraraptor.blogspot.com/2010/12/frequency-limit.html
  697. * Use M201 F<freq> G<min%> to change limits at runtime.
  698. */
  699. //#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
  700. #ifdef XY_FREQUENCY_LIMIT
  701. #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G<min%>.
  702. #endif
  703. // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
  704. // of the buffer and all stops. This should not be much greater than zero and should only be changed
  705. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
  706. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
  707. //
  708. // Backlash Compensation
  709. // Adds extra movement to axes on direction-changes to account for backlash.
  710. //
  711. //#define BACKLASH_COMPENSATION
  712. #if ENABLED(BACKLASH_COMPENSATION)
  713. // Define values for backlash distance and correction.
  714. // If BACKLASH_GCODE is enabled these values are the defaults.
  715. #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
  716. #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction
  717. // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
  718. // to reduce print artifacts. (Enabling this is costly in memory and computation!)
  719. //#define BACKLASH_SMOOTHING_MM 3 // (mm)
  720. // Add runtime configuration and tuning of backlash values (M425)
  721. //#define BACKLASH_GCODE
  722. #if ENABLED(BACKLASH_GCODE)
  723. // Measure the Z backlash when probing (G29) and set with "M425 Z"
  724. #define MEASURE_BACKLASH_WHEN_PROBING
  725. #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
  726. // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
  727. // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION
  728. // increments while checking for the contact to be broken.
  729. #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm)
  730. #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm)
  731. #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m)
  732. #endif
  733. #endif
  734. #endif
  735. /**
  736. * Automatic backlash, position and hotend offset calibration
  737. *
  738. * Enable G425 to run automatic calibration using an electrically-
  739. * conductive cube, bolt, or washer mounted on the bed.
  740. *
  741. * G425 uses the probe to touch the top and sides of the calibration object
  742. * on the bed and measures and/or correct positional offsets, axis backlash
  743. * and hotend offsets.
  744. *
  745. * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within
  746. * ±5mm of true values for G425 to succeed.
  747. */
  748. //#define CALIBRATION_GCODE
  749. #if ENABLED(CALIBRATION_GCODE)
  750. #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm
  751. #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m
  752. #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m
  753. #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m
  754. // The following parameters refer to the conical section of the nozzle tip.
  755. #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
  756. #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
  757. // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM).
  758. //#define CALIBRATION_REPORTING
  759. // The true location and dimension the cube/bolt/washer on the bed.
  760. #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
  761. #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
  762. // Comment out any sides which are unreachable by the probe. For best
  763. // auto-calibration results, all sides must be reachable.
  764. #define CALIBRATION_MEASURE_RIGHT
  765. #define CALIBRATION_MEASURE_FRONT
  766. #define CALIBRATION_MEASURE_LEFT
  767. #define CALIBRATION_MEASURE_BACK
  768. // Probing at the exact top center only works if the center is flat. If
  769. // probing on a screwhead or hollow washer, probe near the edges.
  770. //#define CALIBRATION_MEASURE_AT_TOP_EDGES
  771. // Define the pin to read during calibration
  772. #ifndef CALIBRATION_PIN
  773. //#define CALIBRATION_PIN -1 // Define here to override the default pin
  774. #define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin
  775. //#define CALIBRATION_PIN_PULLDOWN
  776. #define CALIBRATION_PIN_PULLUP
  777. #endif
  778. #endif
  779. /**
  780. * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
  781. * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
  782. * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
  783. * lowest stepping frequencies.
  784. */
  785. //#define ADAPTIVE_STEP_SMOOTHING
  786. /**
  787. * Custom Microstepping
  788. * Override as-needed for your setup. Up to 3 MS pins are supported.
  789. */
  790. //#define MICROSTEP1 LOW,LOW,LOW
  791. //#define MICROSTEP2 HIGH,LOW,LOW
  792. //#define MICROSTEP4 LOW,HIGH,LOW
  793. //#define MICROSTEP8 HIGH,HIGH,LOW
  794. //#define MICROSTEP16 LOW,LOW,HIGH
  795. //#define MICROSTEP32 HIGH,LOW,HIGH
  796. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
  797. #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
  798. /**
  799. * @section stepper motor current
  800. *
  801. * Some boards have a means of setting the stepper motor current via firmware.
  802. *
  803. * The power on motor currents are set by:
  804. * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
  805. * known compatible chips: A4982
  806. * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
  807. * known compatible chips: AD5206
  808. * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
  809. * known compatible chips: MCP4728
  810. * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
  811. * known compatible chips: MCP4451, MCP4018
  812. *
  813. * Motor currents can also be set by M907 - M910 and by the LCD.
  814. * M907 - applies to all.
  815. * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
  816. * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
  817. */
  818. //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
  819. //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
  820. //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
  821. /**
  822. * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro)
  823. */
  824. //#define DIGIPOT_MCP4018 // Requires https://github.com/stawel/SlowSoftI2CMaster
  825. //#define DIGIPOT_MCP4451
  826. #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
  827. #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5
  828. // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
  829. // These correspond to the physical drivers, so be mindful if the order is changed.
  830. #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
  831. //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents)
  832. /**
  833. * Common slave addresses:
  834. *
  835. * A (A shifted) B (B shifted) IC
  836. * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
  837. * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
  838. * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451
  839. * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
  840. * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
  841. */
  842. //#define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT
  843. //#define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT
  844. #endif
  845. //===========================================================================
  846. //=============================Additional Features===========================
  847. //===========================================================================
  848. // @section lcd
  849. #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
  850. #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
  851. #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
  852. #if ENABLED(ULTIPANEL)
  853. #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
  854. #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
  855. #endif
  856. #endif
  857. // Change values more rapidly when the encoder is rotated faster
  858. #define ENCODER_RATE_MULTIPLIER
  859. #if ENABLED(ENCODER_RATE_MULTIPLIER)
  860. #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed
  861. #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
  862. #endif
  863. // Play a beep when the feedrate is changed from the Status Screen
  864. //#define BEEP_ON_FEEDRATE_CHANGE
  865. #if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
  866. #define FEEDRATE_CHANGE_BEEP_DURATION 10
  867. #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
  868. #endif
  869. #if HAS_LCD_MENU
  870. // Include a page of printer information in the LCD Main Menu
  871. //#define LCD_INFO_MENU
  872. #if ENABLED(LCD_INFO_MENU)
  873. //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
  874. #endif
  875. // BACK menu items keep the highlight at the top
  876. //#define TURBO_BACK_MENU_ITEM
  877. /**
  878. * LED Control Menu
  879. * Add LED Control to the LCD menu
  880. */
  881. //#define LED_CONTROL_MENU
  882. #if ENABLED(LED_CONTROL_MENU)
  883. #define LED_COLOR_PRESETS // Enable the Preset Color menu option
  884. #if ENABLED(LED_COLOR_PRESETS)
  885. #define LED_USER_PRESET_RED 255 // User defined RED value
  886. #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
  887. #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
  888. #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
  889. #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
  890. //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
  891. #endif
  892. #endif
  893. #endif // HAS_LCD_MENU
  894. // Scroll a longer status message into view
  895. //#define STATUS_MESSAGE_SCROLLING
  896. // On the Info Screen, display XY with one decimal place when possible
  897. //#define LCD_DECIMAL_SMALL_XY
  898. // The timeout (in ms) to return to the status screen from sub-menus
  899. //#define LCD_TIMEOUT_TO_STATUS 15000
  900. // Add an 'M73' G-code to set the current percentage
  901. //#define LCD_SET_PROGRESS_MANUALLY
  902. // Show the E position (filament used) during printing
  903. //#define LCD_SHOW_E_TOTAL
  904. #if ENABLED(SHOW_BOOTSCREEN)
  905. #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
  906. #endif
  907. #if HAS_GRAPHICAL_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
  908. //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
  909. //#define SHOW_REMAINING_TIME // Display estimated time to completion
  910. #if ENABLED(SHOW_REMAINING_TIME)
  911. //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation
  912. //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time
  913. #endif
  914. #endif
  915. #if HAS_CHARACTER_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
  916. //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
  917. #if ENABLED(LCD_PROGRESS_BAR)
  918. #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
  919. #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message
  920. #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever)
  921. //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it
  922. //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar
  923. #endif
  924. #endif
  925. #if ENABLED(SDSUPPORT)
  926. // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
  927. // Enable this option and set to HIGH if your SD cards are incorrectly detected.
  928. //#define SD_DETECT_STATE HIGH
  929. #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls
  930. #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
  931. #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place
  932. // Reverse SD sort to show "more recent" files first, according to the card's FAT.
  933. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  934. #define SDCARD_RATHERRECENTFIRST
  935. #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing
  936. //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
  937. #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27")
  938. #if ENABLED(PRINTER_EVENT_LEDS)
  939. #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
  940. #endif
  941. /**
  942. * Continue after Power-Loss (Creality3D)
  943. *
  944. * Store the current state to the SD Card at the start of each layer
  945. * during SD printing. If the recovery file is found at boot time, present
  946. * an option on the LCD screen to continue the print from the last-known
  947. * point in the file.
  948. */
  949. //#define POWER_LOSS_RECOVERY
  950. #if ENABLED(POWER_LOSS_RECOVERY)
  951. #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
  952. //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
  953. //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
  954. //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
  955. //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
  956. //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate
  957. //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
  958. //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
  959. // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
  960. // especially with "vase mode" printing. Set too high and vases cannot be continued.
  961. #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
  962. #endif
  963. /**
  964. * Sort SD file listings in alphabetical order.
  965. *
  966. * With this option enabled, items on SD cards will be sorted
  967. * by name for easier navigation.
  968. *
  969. * By default...
  970. *
  971. * - Use the slowest -but safest- method for sorting.
  972. * - Folders are sorted to the top.
  973. * - The sort key is statically allocated.
  974. * - No added G-code (M34) support.
  975. * - 40 item sorting limit. (Items after the first 40 are unsorted.)
  976. *
  977. * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the
  978. * compiler to calculate the worst-case usage and throw an error if the SRAM
  979. * limit is exceeded.
  980. *
  981. * - SDSORT_USES_RAM provides faster sorting via a static directory buffer.
  982. * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer.
  983. * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
  984. * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
  985. */
  986. //#define SDCARD_SORT_ALPHA
  987. // SD Card Sorting options
  988. #if ENABLED(SDCARD_SORT_ALPHA)
  989. #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
  990. #define FOLDER_SORTING -1 // -1=above 0=none 1=below
  991. #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
  992. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
  993. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
  994. #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
  995. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
  996. #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
  997. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
  998. #endif
  999. // This allows hosts to request long names for files and folders with M33
  1000. //#define LONG_FILENAME_HOST_SUPPORT
  1001. // Enable this option to scroll long filenames in the SD card menu
  1002. //#define SCROLL_LONG_FILENAMES
  1003. // Leave the heaters on after Stop Print (not recommended!)
  1004. //#define SD_ABORT_NO_COOLDOWN
  1005. /**
  1006. * This option allows you to abort SD printing when any endstop is triggered.
  1007. * This feature must be enabled with "M540 S1" or from the LCD menu.
  1008. * To have any effect, endstops must be enabled during SD printing.
  1009. */
  1010. //#define SD_ABORT_ON_ENDSTOP_HIT
  1011. /**
  1012. * This option makes it easier to print the same SD Card file again.
  1013. * On print completion the LCD Menu will open with the file selected.
  1014. * You can just click to start the print, or navigate elsewhere.
  1015. */
  1016. //#define SD_REPRINT_LAST_SELECTED_FILE
  1017. /**
  1018. * Auto-report SdCard status with M27 S<seconds>
  1019. */
  1020. //#define AUTO_REPORT_SD_STATUS
  1021. /**
  1022. * Support for USB thumb drives using an Arduino USB Host Shield or
  1023. * equivalent MAX3421E breakout board. The USB thumb drive will appear
  1024. * to Marlin as an SD card.
  1025. *
  1026. * The MAX3421E can be assigned the same pins as the SD card reader, with
  1027. * the following pin mapping:
  1028. *
  1029. * SCLK, MOSI, MISO --> SCLK, MOSI, MISO
  1030. * INT --> SD_DETECT_PIN [1]
  1031. * SS --> SDSS
  1032. *
  1033. * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
  1034. */
  1035. //#define USB_FLASH_DRIVE_SUPPORT
  1036. #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
  1037. #define USB_CS_PIN SDSS
  1038. #define USB_INTR_PIN SD_DETECT_PIN
  1039. /**
  1040. * USB Host Shield Library
  1041. *
  1042. * - UHS2 uses no interrupts and has been production-tested
  1043. * on a LulzBot TAZ Pro with a 32-bit Archim board.
  1044. *
  1045. * - UHS3 is newer code with better USB compatibility. But it
  1046. * is less tested and is known to interfere with Servos.
  1047. * [1] This requires USB_INTR_PIN to be interrupt-capable.
  1048. */
  1049. //#define USE_UHS3_USB
  1050. #endif
  1051. /**
  1052. * When using a bootloader that supports SD-Firmware-Flashing,
  1053. * add a menu item to activate SD-FW-Update on the next reboot.
  1054. *
  1055. * Requires ATMEGA2560 (Arduino Mega)
  1056. *
  1057. * Tested with this bootloader:
  1058. * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560
  1059. */
  1060. //#define SD_FIRMWARE_UPDATE
  1061. #if ENABLED(SD_FIRMWARE_UPDATE)
  1062. #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF
  1063. #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0
  1064. #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF
  1065. #endif
  1066. // Add an optimized binary file transfer mode, initiated with 'M28 B1'
  1067. //#define BINARY_FILE_TRANSFER
  1068. /**
  1069. * Set this option to one of the following (or the board's defaults apply):
  1070. *
  1071. * LCD - Use the SD drive in the external LCD controller.
  1072. * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
  1073. * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
  1074. *
  1075. * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
  1076. */
  1077. //#define SDCARD_CONNECTION LCD
  1078. #endif // SDSUPPORT
  1079. /**
  1080. * By default an onboard SD card reader may be shared as a USB mass-
  1081. * storage device. This option hides the SD card from the host PC.
  1082. */
  1083. //#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security).
  1084. /**
  1085. * Additional options for Graphical Displays
  1086. *
  1087. * Use the optimizations here to improve printing performance,
  1088. * which can be adversely affected by graphical display drawing,
  1089. * especially when doing several short moves, and when printing
  1090. * on DELTA and SCARA machines.
  1091. *
  1092. * Some of these options may result in the display lagging behind
  1093. * controller events, as there is a trade-off between reliable
  1094. * printing performance versus fast display updates.
  1095. */
  1096. #if HAS_GRAPHICAL_LCD
  1097. // Show SD percentage next to the progress bar
  1098. //#define DOGM_SD_PERCENT
  1099. // Save many cycles by drawing a hollow frame or no frame on the Info Screen
  1100. //#define XYZ_NO_FRAME
  1101. #define XYZ_HOLLOW_FRAME
  1102. // Enable to save many cycles by drawing a hollow frame on Menu Screens
  1103. #define MENU_HOLLOW_FRAME
  1104. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
  1105. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1106. //#define USE_BIG_EDIT_FONT
  1107. // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
  1108. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  1109. //#define USE_SMALL_INFOFONT
  1110. // Swap the CW/CCW indicators in the graphics overlay
  1111. //#define OVERLAY_GFX_REVERSE
  1112. /**
  1113. * ST7920-based LCDs can emulate a 16 x 4 character display using
  1114. * the ST7920 character-generator for very fast screen updates.
  1115. * Enable LIGHTWEIGHT_UI to use this special display mode.
  1116. *
  1117. * Since LIGHTWEIGHT_UI has limited space, the position and status
  1118. * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
  1119. * length of time to display the status message before clearing.
  1120. *
  1121. * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
  1122. * This will prevent position updates from being displayed.
  1123. */
  1124. #if ENABLED(U8GLIB_ST7920)
  1125. // Enable this option and reduce the value to optimize screen updates.
  1126. // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
  1127. //#define DOGM_SPI_DELAY_US 5
  1128. //#define LIGHTWEIGHT_UI
  1129. #if ENABLED(LIGHTWEIGHT_UI)
  1130. #define STATUS_EXPIRE_SECONDS 20
  1131. #endif
  1132. #endif
  1133. /**
  1134. * Status (Info) Screen customizations
  1135. * These options may affect code size and screen render time.
  1136. * Custom status screens can forcibly override these settings.
  1137. */
  1138. //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
  1139. //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
  1140. #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
  1141. #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
  1142. #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
  1143. #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
  1144. //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
  1145. //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
  1146. //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
  1147. //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
  1148. //#define STATUS_HEAT_PERCENT // Show heating in a progress bar
  1149. //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
  1150. //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
  1151. // Frivolous Game Options
  1152. //#define MARLIN_BRICKOUT
  1153. //#define MARLIN_INVADERS
  1154. //#define MARLIN_SNAKE
  1155. //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu
  1156. #endif // HAS_GRAPHICAL_LCD
  1157. //
  1158. // Additional options for DGUS / DWIN displays
  1159. //
  1160. #if HAS_DGUS_LCD
  1161. #define DGUS_SERIAL_PORT 3
  1162. #define DGUS_BAUDRATE 115200
  1163. #define DGUS_RX_BUFFER_SIZE 128
  1164. #define DGUS_TX_BUFFER_SIZE 48
  1165. //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
  1166. #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
  1167. #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
  1168. #define DGUS_PRINT_FILENAME // Display the filename during printing
  1169. #define DGUS_PREHEAT_UI // Display a preheat screen during heatup
  1170. #if ENABLED(DGUS_LCD_UI_FYSETC)
  1171. //#define DGUS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
  1172. #else
  1173. #define DGUS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
  1174. #endif
  1175. #define DGUS_FILAMENT_LOADUNLOAD
  1176. #if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
  1177. #define DGUS_FILAMENT_PURGE_LENGTH 10
  1178. #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
  1179. #endif
  1180. #define DGUS_UI_WAITING // Show a "waiting" screen between some screens
  1181. #if ENABLED(DGUS_UI_WAITING)
  1182. #define DGUS_UI_WAITING_STATUS 10
  1183. #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
  1184. #endif
  1185. #endif
  1186. #endif // HAS_DGUS_LCD
  1187. //
  1188. // Touch UI for the FTDI Embedded Video Engine (EVE)
  1189. //
  1190. #if ENABLED(TOUCH_UI_FTDI_EVE)
  1191. // Display board used
  1192. //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
  1193. //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
  1194. //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
  1195. //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
  1196. //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
  1197. //#define LCD_FYSETC_TFT81050 // FYSETC with 5" (800x480)
  1198. // Correct the resolution if not using the stock TFT panel.
  1199. //#define TOUCH_UI_320x240
  1200. //#define TOUCH_UI_480x272
  1201. //#define TOUCH_UI_800x480
  1202. // Mappings for boards with a standard RepRapDiscount Display connector
  1203. //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
  1204. //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
  1205. //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
  1206. //#define S6_TFT_PINMAP // FYSETC S6 pin mapping
  1207. //#define CHEETAH_TFT_PINMAP // FYSETC Cheetah pin mapping
  1208. //#define E3_EXP1_PINMAP // E3 type boards (SKR E3/DIP, FYSETC Cheetah and Stock boards) EXP1 pin mapping
  1209. //#define GENERIC_EXP2_PINMAP // GENERIC EXP2 pin mapping
  1210. //#define OTHER_PIN_LAYOUT // Define pins manually below
  1211. #if ENABLED(OTHER_PIN_LAYOUT)
  1212. // Pins for CS and MOD_RESET (PD) must be chosen
  1213. #define CLCD_MOD_RESET 9
  1214. #define CLCD_SPI_CS 10
  1215. // If using software SPI, specify pins for SCLK, MOSI, MISO
  1216. //#define CLCD_USE_SOFT_SPI
  1217. #if ENABLED(CLCD_USE_SOFT_SPI)
  1218. #define CLCD_SOFT_SPI_MOSI 11
  1219. #define CLCD_SOFT_SPI_MISO 12
  1220. #define CLCD_SOFT_SPI_SCLK 13
  1221. #endif
  1222. #endif
  1223. // Display Orientation. An inverted (i.e. upside-down) display
  1224. // is supported on the FT800. The FT810 and beyond also support
  1225. // portrait and mirrored orientations.
  1226. //#define TOUCH_UI_INVERTED
  1227. //#define TOUCH_UI_PORTRAIT
  1228. //#define TOUCH_UI_MIRRORED
  1229. // UTF8 processing and rendering.
  1230. // Unsupported characters are shown as '?'.
  1231. //#define TOUCH_UI_USE_UTF8
  1232. #if ENABLED(TOUCH_UI_USE_UTF8)
  1233. // Western accents support. These accented characters use
  1234. // combined bitmaps and require relatively little storage.
  1235. #define TOUCH_UI_UTF8_WESTERN_CHARSET
  1236. #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET)
  1237. // Additional character groups. These characters require
  1238. // full bitmaps and take up considerable storage:
  1239. //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³
  1240. //#define TOUCH_UI_UTF8_COPYRIGHT // © ®
  1241. //#define TOUCH_UI_UTF8_GERMANIC // ß
  1242. //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ
  1243. //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡
  1244. //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥
  1245. //#define TOUCH_UI_UTF8_ORDINALS // º ª
  1246. //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷
  1247. //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾
  1248. //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬
  1249. #endif
  1250. #endif
  1251. // Use a smaller font when labels don't fit buttons
  1252. #define TOUCH_UI_FIT_TEXT
  1253. // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
  1254. //#define LCD_LANGUAGE_1 en
  1255. //#define LCD_LANGUAGE_2 fr
  1256. //#define LCD_LANGUAGE_3 de
  1257. //#define LCD_LANGUAGE_4 es
  1258. //#define LCD_LANGUAGE_5 it
  1259. // Use a numeric passcode for "Screen lock" keypad.
  1260. // (recommended for smaller displays)
  1261. //#define TOUCH_UI_PASSCODE
  1262. // Output extra debug info for Touch UI events
  1263. //#define TOUCH_UI_DEBUG
  1264. // Developer menu (accessed by touching "About Printer" copyright text)
  1265. //#define TOUCH_UI_DEVELOPER_MENU
  1266. #endif
  1267. //
  1268. // FSMC Graphical TFT
  1269. //
  1270. #if ENABLED(FSMC_GRAPHICAL_TFT)
  1271. //#define TFT_MARLINUI_COLOR 0xFFFF // White
  1272. //#define TFT_MARLINBG_COLOR 0x0000 // Black
  1273. //#define TFT_DISABLED_COLOR 0x0003 // Almost black
  1274. //#define TFT_BTCANCEL_COLOR 0xF800 // Red
  1275. //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow
  1276. //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
  1277. #endif
  1278. //
  1279. // ADC Button Debounce
  1280. //
  1281. #if HAS_ADC_BUTTONS
  1282. #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (ms) Increase if buttons bounce or repeat too fast
  1283. #endif
  1284. // @section safety
  1285. /**
  1286. * The watchdog hardware timer will do a reset and disable all outputs
  1287. * if the firmware gets too overloaded to read the temperature sensors.
  1288. *
  1289. * If you find that watchdog reboot causes your AVR board to hang forever,
  1290. * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO.
  1291. * NOTE: This method is less reliable as it can only catch hangups while
  1292. * interrupts are enabled.
  1293. */
  1294. #define USE_WATCHDOG
  1295. #if ENABLED(USE_WATCHDOG)
  1296. //#define WATCHDOG_RESET_MANUAL
  1297. #endif
  1298. // @section lcd
  1299. /**
  1300. * Babystepping enables movement of the axes by tiny increments without changing
  1301. * the current position values. This feature is used primarily to adjust the Z
  1302. * axis in the first layer of a print in real-time.
  1303. *
  1304. * Warning: Does not respect endstops!
  1305. */
  1306. //#define BABYSTEPPING
  1307. #if ENABLED(BABYSTEPPING)
  1308. //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
  1309. //#define BABYSTEP_WITHOUT_HOMING
  1310. //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
  1311. #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
  1312. #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion.
  1313. #define BABYSTEP_MULTIPLICATOR_XY 1
  1314. //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
  1315. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
  1316. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
  1317. // Note: Extra time may be added to mitigate controller latency.
  1318. //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
  1319. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
  1320. #if ENABLED(MOVE_Z_WHEN_IDLE)
  1321. #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
  1322. #endif
  1323. #endif
  1324. //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
  1325. //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
  1326. #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
  1327. //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
  1328. //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
  1329. #endif
  1330. #endif
  1331. // @section extruder
  1332. /**
  1333. * Linear Pressure Control v1.5
  1334. *
  1335. * Assumption: advance [steps] = k * (delta velocity [steps/s])
  1336. * K=0 means advance disabled.
  1337. *
  1338. * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
  1339. *
  1340. * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
  1341. * Larger K values will be needed for flexible filament and greater distances.
  1342. * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
  1343. * print acceleration will be reduced during the affected moves to keep within the limit.
  1344. *
  1345. * See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
  1346. */
  1347. //#define LIN_ADVANCE
  1348. #if ENABLED(LIN_ADVANCE)
  1349. //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
  1350. #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
  1351. //#define LA_DEBUG // If enabled, this will generate debug information output over USB.
  1352. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
  1353. #endif
  1354. // @section leveling
  1355. /**
  1356. * Points to probe for all 3-point Leveling procedures.
  1357. * Override if the automatically selected points are inadequate.
  1358. */
  1359. #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
  1360. //#define PROBE_PT_1_X 15
  1361. //#define PROBE_PT_1_Y 180
  1362. //#define PROBE_PT_2_X 15
  1363. //#define PROBE_PT_2_Y 20
  1364. //#define PROBE_PT_3_X 170
  1365. //#define PROBE_PT_3_Y 20
  1366. #endif
  1367. /**
  1368. * Override MIN_PROBE_EDGE for each side of the build plate
  1369. * Useful to get probe points to exact positions on targets or
  1370. * to allow leveling to avoid plate clamps on only specific
  1371. * sides of the bed. With NOZZLE_AS_PROBE negative values are
  1372. * allowed, to permit probing outside the bed.
  1373. *
  1374. * If you are replacing the prior *_PROBE_BED_POSITION options,
  1375. * LEFT and FRONT values in most cases will map directly over
  1376. * RIGHT and REAR would be the inverse such as
  1377. * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION)
  1378. *
  1379. * This will allow all positions to match at compilation, however
  1380. * should the probe position be modified with M851XY then the
  1381. * probe points will follow. This prevents any change from causing
  1382. * the probe to be unable to reach any points.
  1383. */
  1384. #if PROBE_SELECTED && !IS_KINEMATIC
  1385. //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE
  1386. //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE
  1387. //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE
  1388. //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE
  1389. #endif
  1390. #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
  1391. // Override the mesh area if the automatic (max) area is too large
  1392. //#define MESH_MIN_X MESH_INSET
  1393. //#define MESH_MIN_Y MESH_INSET
  1394. //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
  1395. //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
  1396. #endif
  1397. /**
  1398. * Repeatedly attempt G29 leveling until it succeeds.
  1399. * Stop after G29_MAX_RETRIES attempts.
  1400. */
  1401. //#define G29_RETRY_AND_RECOVER
  1402. #if ENABLED(G29_RETRY_AND_RECOVER)
  1403. #define G29_MAX_RETRIES 3
  1404. #define G29_HALT_ON_FAILURE
  1405. /**
  1406. * Specify the GCODE commands that will be executed when leveling succeeds,
  1407. * between attempts, and after the maximum number of retries have been tried.
  1408. */
  1409. #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
  1410. #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
  1411. #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
  1412. #endif
  1413. /**
  1414. * Thermal Probe Compensation
  1415. * Probe measurements are adjusted to compensate for temperature distortion.
  1416. * Use G76 to calibrate this feature. Use M871 to set values manually.
  1417. * For a more detailed explanation of the process see G76_M871.cpp.
  1418. */
  1419. #if HAS_BED_PROBE && TEMP_SENSOR_PROBE && TEMP_SENSOR_BED
  1420. // Enable thermal first layer compensation using bed and probe temperatures
  1421. #define PROBE_TEMP_COMPENSATION
  1422. // Add additional compensation depending on hotend temperature
  1423. // Note: this values cannot be calibrated and have to be set manually
  1424. #if ENABLED(PROBE_TEMP_COMPENSATION)
  1425. // Park position to wait for probe cooldown
  1426. #define PTC_PARK_POS { 0, 0, 100 }
  1427. // Probe position to probe and wait for probe to reach target temperature
  1428. #define PTC_PROBE_POS { 90, 100 }
  1429. // Enable additional compensation using hotend temperature
  1430. // Note: this values cannot be calibrated automatically but have to be set manually
  1431. //#define USE_TEMP_EXT_COMPENSATION
  1432. #endif
  1433. #endif
  1434. // @section extras
  1435. //
  1436. // G60/G61 Position Save and Return
  1437. //
  1438. //#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes
  1439. //
  1440. // G2/G3 Arc Support
  1441. //
  1442. #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
  1443. #if ENABLED(ARC_SUPPORT)
  1444. #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment
  1445. //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min
  1446. #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle
  1447. //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
  1448. #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
  1449. //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
  1450. //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
  1451. #endif
  1452. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
  1453. //#define BEZIER_CURVE_SUPPORT
  1454. /**
  1455. * G38 Probe Target
  1456. *
  1457. * This option adds G38.2 and G38.3 (probe towards target)
  1458. * and optionally G38.4 and G38.5 (probe away from target).
  1459. * Set MULTIPLE_PROBING for G38 to probe more than once.
  1460. */
  1461. //#define G38_PROBE_TARGET
  1462. #if ENABLED(G38_PROBE_TARGET)
  1463. //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
  1464. #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
  1465. #endif
  1466. // Moves (or segments) with fewer steps than this will be joined with the next move
  1467. #define MIN_STEPS_PER_SEGMENT 6
  1468. /**
  1469. * Minimum delay before and after setting the stepper DIR (in ns)
  1470. * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
  1471. * 20 : Minimum for TMC2xxx drivers
  1472. * 200 : Minimum for A4988 drivers
  1473. * 400 : Minimum for A5984 drivers
  1474. * 500 : Minimum for LV8729 drivers (guess, no info in datasheet)
  1475. * 650 : Minimum for DRV8825 drivers
  1476. * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
  1477. * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
  1478. *
  1479. * Override the default value based on the driver type set in Configuration.h.
  1480. */
  1481. //#define MINIMUM_STEPPER_POST_DIR_DELAY 650
  1482. //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
  1483. /**
  1484. * Minimum stepper driver pulse width (in µs)
  1485. * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
  1486. * 0 : Minimum 500ns for LV8729, adjusted in stepper.h
  1487. * 1 : Minimum for A4988 and A5984 stepper drivers
  1488. * 2 : Minimum for DRV8825 stepper drivers
  1489. * 3 : Minimum for TB6600 stepper drivers
  1490. * 30 : Minimum for TB6560 stepper drivers
  1491. *
  1492. * Override the default value based on the driver type set in Configuration.h.
  1493. */
  1494. //#define MINIMUM_STEPPER_PULSE 2
  1495. /**
  1496. * Maximum stepping rate (in Hz) the stepper driver allows
  1497. * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
  1498. * 5000000 : Maximum for TMC2xxx stepper drivers
  1499. * 1000000 : Maximum for LV8729 stepper driver
  1500. * 500000 : Maximum for A4988 stepper driver
  1501. * 250000 : Maximum for DRV8825 stepper driver
  1502. * 150000 : Maximum for TB6600 stepper driver
  1503. * 15000 : Maximum for TB6560 stepper driver
  1504. *
  1505. * Override the default value based on the driver type set in Configuration.h.
  1506. */
  1507. //#define MAXIMUM_STEPPER_RATE 250000
  1508. // @section temperature
  1509. // Control heater 0 and heater 1 in parallel.
  1510. //#define HEATERS_PARALLEL
  1511. //===========================================================================
  1512. //================================= Buffers =================================
  1513. //===========================================================================
  1514. // @section hidden
  1515. // The number of linear motions that can be in the plan at any give time.
  1516. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
  1517. #if ENABLED(SDSUPPORT)
  1518. #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
  1519. #else
  1520. #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
  1521. #endif
  1522. // @section serial
  1523. // The ASCII buffer for serial input
  1524. #define MAX_CMD_SIZE 96
  1525. #define BUFSIZE 4
  1526. // Transmission to Host Buffer Size
  1527. // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
  1528. // To buffer a simple "ok" you need 4 bytes.
  1529. // For ADVANCED_OK (M105) you need 32 bytes.
  1530. // For debug-echo: 128 bytes for the optimal speed.
  1531. // Other output doesn't need to be that speedy.
  1532. // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
  1533. #define TX_BUFFER_SIZE 0
  1534. // Host Receive Buffer Size
  1535. // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
  1536. // To use flow control, set this buffer size to at least 1024 bytes.
  1537. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
  1538. //#define RX_BUFFER_SIZE 1024
  1539. #if RX_BUFFER_SIZE >= 1024
  1540. // Enable to have the controller send XON/XOFF control characters to
  1541. // the host to signal the RX buffer is becoming full.
  1542. //#define SERIAL_XON_XOFF
  1543. #endif
  1544. // Add M575 G-code to change the baud rate
  1545. //#define BAUD_RATE_GCODE
  1546. #if ENABLED(SDSUPPORT)
  1547. // Enable this option to collect and display the maximum
  1548. // RX queue usage after transferring a file to SD.
  1549. //#define SERIAL_STATS_MAX_RX_QUEUED
  1550. // Enable this option to collect and display the number
  1551. // of dropped bytes after a file transfer to SD.
  1552. //#define SERIAL_STATS_DROPPED_RX
  1553. #endif
  1554. // Enable an emergency-command parser to intercept certain commands as they
  1555. // enter the serial receive buffer, so they cannot be blocked.
  1556. // Currently handles M108, M112, M410
  1557. // Does not work on boards using AT90USB (USBCON) processors!
  1558. //#define EMERGENCY_PARSER
  1559. // Bad Serial-connections can miss a received command by sending an 'ok'
  1560. // Therefore some clients abort after 30 seconds in a timeout.
  1561. // Some other clients start sending commands while receiving a 'wait'.
  1562. // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
  1563. //#define NO_TIMEOUTS 1000 // Milliseconds
  1564. // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
  1565. //#define ADVANCED_OK
  1566. // Printrun may have trouble receiving long strings all at once.
  1567. // This option inserts short delays between lines of serial output.
  1568. #define SERIAL_OVERRUN_PROTECTION
  1569. // @section extras
  1570. /**
  1571. * Extra Fan Speed
  1572. * Adds a secondary fan speed for each print-cooling fan.
  1573. * 'M106 P<fan> T3-255' : Set a secondary speed for <fan>
  1574. * 'M106 P<fan> T2' : Use the set secondary speed
  1575. * 'M106 P<fan> T1' : Restore the previous fan speed
  1576. */
  1577. //#define EXTRA_FAN_SPEED
  1578. /**
  1579. * Firmware-based and LCD-controlled retract
  1580. *
  1581. * Add G10 / G11 commands for automatic firmware-based retract / recover.
  1582. * Use M207 and M208 to define parameters for retract / recover.
  1583. *
  1584. * Use M209 to enable or disable auto-retract.
  1585. * With auto-retract enabled, all G1 E moves within the set range
  1586. * will be converted to firmware-based retract/recover moves.
  1587. *
  1588. * Be sure to turn off auto-retract during filament change.
  1589. *
  1590. * Note that M207 / M208 / M209 settings are saved to EEPROM.
  1591. *
  1592. */
  1593. //#define FWRETRACT
  1594. #if ENABLED(FWRETRACT)
  1595. #define FWRETRACT_AUTORETRACT // Override slicer retractions
  1596. #if ENABLED(FWRETRACT_AUTORETRACT)
  1597. #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length
  1598. #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length
  1599. #endif
  1600. #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value)
  1601. #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value)
  1602. #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting
  1603. #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise
  1604. #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover)
  1605. #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange)
  1606. #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction
  1607. #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction
  1608. #if ENABLED(MIXING_EXTRUDER)
  1609. //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously
  1610. #endif
  1611. #endif
  1612. /**
  1613. * Universal tool change settings.
  1614. * Applies to all types of extruders except where explicitly noted.
  1615. */
  1616. #if EXTRUDERS > 1
  1617. // Z raise distance for tool-change, as needed for some extruders
  1618. #define TOOLCHANGE_ZRAISE 2 // (mm)
  1619. //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled)
  1620. //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change
  1621. #if ENABLED(TOOLCHANGE_NO_RETURN)
  1622. //#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X" // Extra G-code to run after tool-change
  1623. #endif
  1624. /**
  1625. * Retract and prime filament on tool-change to reduce
  1626. * ooze and stringing and to get cleaner transitions.
  1627. */
  1628. //#define TOOLCHANGE_FILAMENT_SWAP
  1629. #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
  1630. // Load / Unload
  1631. #define TOOLCHANGE_FS_LENGTH 12 // (mm) Load / Unload length
  1632. #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH 0 // (mm) Extra length for better restart, fine tune by LCD/Gcode)
  1633. #define TOOLCHANGE_FS_RETRACT_SPEED (50*60) // (mm/m) (Unloading)
  1634. #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/m) (On SINGLENOZZLE or Bowden loading must be slowed down)
  1635. // Longer prime to clean out a SINGLENOZZLE
  1636. #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length
  1637. #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/m) Extra priming feedrate
  1638. #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm/m) Retract before cooling for less stringing, better wipe, etc.
  1639. // Cool after prime to reduce stringing
  1640. #define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip
  1641. #define TOOLCHANGE_FS_FAN_SPEED 255 // 0-255
  1642. #define TOOLCHANGE_FS_FAN_TIME 10 // (seconds)
  1643. // Swap uninitialized extruder with TOOLCHANGE_FS_PRIME_SPEED for all lengths (recover + prime)
  1644. // (May break filament if not retracted beforehand.)
  1645. //#define TOOLCHANGE_FS_INIT_BEFORE_SWAP
  1646. // Prime on the first T0 (If other, TOOLCHANGE_FS_INIT_BEFORE_SWAP applied)
  1647. // Enable it (M217 V[0/1]) before printing, to avoid unwanted priming on host connect
  1648. //#define TOOLCHANGE_FS_PRIME_FIRST_USED
  1649. /**
  1650. * Tool Change Migration
  1651. * This feature provides G-code and LCD options to switch tools mid-print.
  1652. * All applicable tool properties are migrated so the print can continue.
  1653. * Tools must be closely matching and other restrictions may apply.
  1654. * Useful to:
  1655. * - Change filament color without interruption
  1656. * - Switch spools automatically on filament runout
  1657. * - Switch to a different nozzle on an extruder jam
  1658. */
  1659. #define TOOLCHANGE_MIGRATION_FEATURE
  1660. #endif
  1661. /**
  1662. * Position to park head during tool change.
  1663. * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
  1664. */
  1665. //#define TOOLCHANGE_PARK
  1666. #if ENABLED(TOOLCHANGE_PARK)
  1667. #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
  1668. #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
  1669. //#define TOOLCHANGE_PARK_X_ONLY // X axis only move
  1670. //#define TOOLCHANGE_PARK_Y_ONLY // Y axis only move
  1671. #endif
  1672. #endif // EXTRUDERS > 1
  1673. /**
  1674. * Advanced Pause
  1675. * Experimental feature for filament change support and for parking the nozzle when paused.
  1676. * Adds the GCode M600 for initiating filament change.
  1677. * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  1678. *
  1679. * Requires an LCD display.
  1680. * Requires NOZZLE_PARK_FEATURE.
  1681. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  1682. */
  1683. //#define ADVANCED_PAUSE_FEATURE
  1684. #if ENABLED(ADVANCED_PAUSE_FEATURE)
  1685. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
  1686. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
  1687. // This short retract is done immediately, before parking the nozzle.
  1688. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
  1689. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
  1690. #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
  1691. // For Bowden, the full length of the tube and nozzle.
  1692. // For direct drive, the full length of the nozzle.
  1693. // Set to 0 for manual unloading.
  1694. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
  1695. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
  1696. // 0 to disable start loading and skip to fast load only
  1697. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
  1698. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
  1699. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
  1700. // For Bowden, the full length of the tube and nozzle.
  1701. // For direct drive, the full length of the nozzle.
  1702. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
  1703. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
  1704. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
  1705. // Set to 0 for manual extrusion.
  1706. // Filament can be extruded repeatedly from the Filament Change menu
  1707. // until extrusion is consistent, and to purge old filament.
  1708. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
  1709. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
  1710. // Filament Unload does a Retract, Delay, and Purge first:
  1711. #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
  1712. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract.
  1713. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
  1714. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
  1715. #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
  1716. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
  1717. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
  1718. //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
  1719. //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
  1720. //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
  1721. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
  1722. #endif
  1723. // @section tmc
  1724. /**
  1725. * TMC26X Stepper Driver options
  1726. *
  1727. * The TMC26XStepper library is required for this stepper driver.
  1728. * https://github.com/trinamic/TMC26XStepper
  1729. */
  1730. #if HAS_DRIVER(TMC26X)
  1731. #if AXIS_DRIVER_TYPE_X(TMC26X)
  1732. #define X_MAX_CURRENT 1000 // (mA)
  1733. #define X_SENSE_RESISTOR 91 // (mOhms)
  1734. #define X_MICROSTEPS 16 // Number of microsteps
  1735. #endif
  1736. #if AXIS_DRIVER_TYPE_X2(TMC26X)
  1737. #define X2_MAX_CURRENT 1000
  1738. #define X2_SENSE_RESISTOR 91
  1739. #define X2_MICROSTEPS 16
  1740. #endif
  1741. #if AXIS_DRIVER_TYPE_Y(TMC26X)
  1742. #define Y_MAX_CURRENT 1000
  1743. #define Y_SENSE_RESISTOR 91
  1744. #define Y_MICROSTEPS 16
  1745. #endif
  1746. #if AXIS_DRIVER_TYPE_Y2(TMC26X)
  1747. #define Y2_MAX_CURRENT 1000
  1748. #define Y2_SENSE_RESISTOR 91
  1749. #define Y2_MICROSTEPS 16
  1750. #endif
  1751. #if AXIS_DRIVER_TYPE_Z(TMC26X)
  1752. #define Z_MAX_CURRENT 1000
  1753. #define Z_SENSE_RESISTOR 91
  1754. #define Z_MICROSTEPS 16
  1755. #endif
  1756. #if AXIS_DRIVER_TYPE_Z2(TMC26X)
  1757. #define Z2_MAX_CURRENT 1000
  1758. #define Z2_SENSE_RESISTOR 91
  1759. #define Z2_MICROSTEPS 16
  1760. #endif
  1761. #if AXIS_DRIVER_TYPE_Z3(TMC26X)
  1762. #define Z3_MAX_CURRENT 1000
  1763. #define Z3_SENSE_RESISTOR 91
  1764. #define Z3_MICROSTEPS 16
  1765. #endif
  1766. #if AXIS_DRIVER_TYPE_Z4(TMC26X)
  1767. #define Z4_MAX_CURRENT 1000
  1768. #define Z4_SENSE_RESISTOR 91
  1769. #define Z4_MICROSTEPS 16
  1770. #endif
  1771. #if AXIS_DRIVER_TYPE_E0(TMC26X)
  1772. #define E0_MAX_CURRENT 1000
  1773. #define E0_SENSE_RESISTOR 91
  1774. #define E0_MICROSTEPS 16
  1775. #endif
  1776. #if AXIS_DRIVER_TYPE_E1(TMC26X)
  1777. #define E1_MAX_CURRENT 1000
  1778. #define E1_SENSE_RESISTOR 91
  1779. #define E1_MICROSTEPS 16
  1780. #endif
  1781. #if AXIS_DRIVER_TYPE_E2(TMC26X)
  1782. #define E2_MAX_CURRENT 1000
  1783. #define E2_SENSE_RESISTOR 91
  1784. #define E2_MICROSTEPS 16
  1785. #endif
  1786. #if AXIS_DRIVER_TYPE_E3(TMC26X)
  1787. #define E3_MAX_CURRENT 1000
  1788. #define E3_SENSE_RESISTOR 91
  1789. #define E3_MICROSTEPS 16
  1790. #endif
  1791. #if AXIS_DRIVER_TYPE_E4(TMC26X)
  1792. #define E4_MAX_CURRENT 1000
  1793. #define E4_SENSE_RESISTOR 91
  1794. #define E4_MICROSTEPS 16
  1795. #endif
  1796. #if AXIS_DRIVER_TYPE_E5(TMC26X)
  1797. #define E5_MAX_CURRENT 1000
  1798. #define E5_SENSE_RESISTOR 91
  1799. #define E5_MICROSTEPS 16
  1800. #endif
  1801. #if AXIS_DRIVER_TYPE_E6(TMC26X)
  1802. #define E6_MAX_CURRENT 1000
  1803. #define E6_SENSE_RESISTOR 91
  1804. #define E6_MICROSTEPS 16
  1805. #endif
  1806. #if AXIS_DRIVER_TYPE_E7(TMC26X)
  1807. #define E7_MAX_CURRENT 1000
  1808. #define E7_SENSE_RESISTOR 91
  1809. #define E7_MICROSTEPS 16
  1810. #endif
  1811. #endif // TMC26X
  1812. // @section tmc_smart
  1813. /**
  1814. * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
  1815. * connect your SPI pins to the hardware SPI interface on your board and define
  1816. * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3
  1817. * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
  1818. * You may also use software SPI if you wish to use general purpose IO pins.
  1819. *
  1820. * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN
  1821. * to the driver side PDN_UART pin with a 1K resistor.
  1822. * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without
  1823. * a resistor.
  1824. * The drivers can also be used with hardware serial.
  1825. *
  1826. * TMCStepper library is required to use TMC stepper drivers.
  1827. * https://github.com/teemuatlut/TMCStepper
  1828. */
  1829. #if HAS_TRINAMIC_CONFIG
  1830. #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
  1831. #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
  1832. #if AXIS_IS_TMC(X)
  1833. #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
  1834. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
  1835. #define X_MICROSTEPS 16 // 0..256
  1836. #define X_RSENSE 0.11
  1837. #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
  1838. #endif
  1839. #if AXIS_IS_TMC(X2)
  1840. #define X2_CURRENT 800
  1841. #define X2_CURRENT_HOME X2_CURRENT
  1842. #define X2_MICROSTEPS 16
  1843. #define X2_RSENSE 0.11
  1844. #define X2_CHAIN_POS -1
  1845. #endif
  1846. #if AXIS_IS_TMC(Y)
  1847. #define Y_CURRENT 800
  1848. #define Y_CURRENT_HOME Y_CURRENT
  1849. #define Y_MICROSTEPS 16
  1850. #define Y_RSENSE 0.11
  1851. #define Y_CHAIN_POS -1
  1852. #endif
  1853. #if AXIS_IS_TMC(Y2)
  1854. #define Y2_CURRENT 800
  1855. #define Y2_CURRENT_HOME Y2_CURRENT
  1856. #define Y2_MICROSTEPS 16
  1857. #define Y2_RSENSE 0.11
  1858. #define Y2_CHAIN_POS -1
  1859. #endif
  1860. #if AXIS_IS_TMC(Z)
  1861. #define Z_CURRENT 800
  1862. #define Z_CURRENT_HOME Z_CURRENT
  1863. #define Z_MICROSTEPS 16
  1864. #define Z_RSENSE 0.11
  1865. #define Z_CHAIN_POS -1
  1866. #endif
  1867. #if AXIS_IS_TMC(Z2)
  1868. #define Z2_CURRENT 800
  1869. #define Z2_CURRENT_HOME Z2_CURRENT
  1870. #define Z2_MICROSTEPS 16
  1871. #define Z2_RSENSE 0.11
  1872. #define Z2_CHAIN_POS -1
  1873. #endif
  1874. #if AXIS_IS_TMC(Z3)
  1875. #define Z3_CURRENT 800
  1876. #define Z3_CURRENT_HOME Z3_CURRENT
  1877. #define Z3_MICROSTEPS 16
  1878. #define Z3_RSENSE 0.11
  1879. #define Z3_CHAIN_POS -1
  1880. #endif
  1881. #if AXIS_IS_TMC(Z4)
  1882. #define Z4_CURRENT 800
  1883. #define Z4_CURRENT_HOME Z4_CURRENT
  1884. #define Z4_MICROSTEPS 16
  1885. #define Z4_RSENSE 0.11
  1886. #define Z4_CHAIN_POS -1
  1887. #endif
  1888. #if AXIS_IS_TMC(E0)
  1889. #define E0_CURRENT 800
  1890. #define E0_MICROSTEPS 16
  1891. #define E0_RSENSE 0.11
  1892. #define E0_CHAIN_POS -1
  1893. #endif
  1894. #if AXIS_IS_TMC(E1)
  1895. #define E1_CURRENT 800
  1896. #define E1_MICROSTEPS 16
  1897. #define E1_RSENSE 0.11
  1898. #define E1_CHAIN_POS -1
  1899. #endif
  1900. #if AXIS_IS_TMC(E2)
  1901. #define E2_CURRENT 800
  1902. #define E2_MICROSTEPS 16
  1903. #define E2_RSENSE 0.11
  1904. #define E2_CHAIN_POS -1
  1905. #endif
  1906. #if AXIS_IS_TMC(E3)
  1907. #define E3_CURRENT 800
  1908. #define E3_MICROSTEPS 16
  1909. #define E3_RSENSE 0.11
  1910. #define E3_CHAIN_POS -1
  1911. #endif
  1912. #if AXIS_IS_TMC(E4)
  1913. #define E4_CURRENT 800
  1914. #define E4_MICROSTEPS 16
  1915. #define E4_RSENSE 0.11
  1916. #define E4_CHAIN_POS -1
  1917. #endif
  1918. #if AXIS_IS_TMC(E5)
  1919. #define E5_CURRENT 800
  1920. #define E5_MICROSTEPS 16
  1921. #define E5_RSENSE 0.11
  1922. #define E5_CHAIN_POS -1
  1923. #endif
  1924. #if AXIS_IS_TMC(E6)
  1925. #define E6_CURRENT 800
  1926. #define E6_MICROSTEPS 16
  1927. #define E6_RSENSE 0.11
  1928. #define E6_CHAIN_POS -1
  1929. #endif
  1930. #if AXIS_IS_TMC(E7)
  1931. #define E7_CURRENT 800
  1932. #define E7_MICROSTEPS 16
  1933. #define E7_RSENSE 0.11
  1934. #define E7_CHAIN_POS -1
  1935. #endif
  1936. /**
  1937. * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
  1938. * The default pins can be found in your board's pins file.
  1939. */
  1940. //#define X_CS_PIN -1
  1941. //#define Y_CS_PIN -1
  1942. //#define Z_CS_PIN -1
  1943. //#define X2_CS_PIN -1
  1944. //#define Y2_CS_PIN -1
  1945. //#define Z2_CS_PIN -1
  1946. //#define Z3_CS_PIN -1
  1947. //#define E0_CS_PIN -1
  1948. //#define E1_CS_PIN -1
  1949. //#define E2_CS_PIN -1
  1950. //#define E3_CS_PIN -1
  1951. //#define E4_CS_PIN -1
  1952. //#define E5_CS_PIN -1
  1953. //#define E6_CS_PIN -1
  1954. //#define E7_CS_PIN -1
  1955. /**
  1956. * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160).
  1957. * The default SW SPI pins are defined the respective pins files,
  1958. * but you can override or define them here.
  1959. */
  1960. //#define TMC_USE_SW_SPI
  1961. //#define TMC_SW_MOSI -1
  1962. //#define TMC_SW_MISO -1
  1963. //#define TMC_SW_SCK -1
  1964. /**
  1965. * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
  1966. * Set the address using jumpers on pins MS1 and MS2.
  1967. * Address | MS1 | MS2
  1968. * 0 | LOW | LOW
  1969. * 1 | HIGH | LOW
  1970. * 2 | LOW | HIGH
  1971. * 3 | HIGH | HIGH
  1972. *
  1973. * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
  1974. * on the same serial port, either here or in your board's pins file.
  1975. */
  1976. #define X_SLAVE_ADDRESS 0
  1977. #define Y_SLAVE_ADDRESS 0
  1978. #define Z_SLAVE_ADDRESS 0
  1979. #define X2_SLAVE_ADDRESS 0
  1980. #define Y2_SLAVE_ADDRESS 0
  1981. #define Z2_SLAVE_ADDRESS 0
  1982. #define Z3_SLAVE_ADDRESS 0
  1983. #define Z4_SLAVE_ADDRESS 0
  1984. #define E0_SLAVE_ADDRESS 0
  1985. #define E1_SLAVE_ADDRESS 0
  1986. #define E2_SLAVE_ADDRESS 0
  1987. #define E3_SLAVE_ADDRESS 0
  1988. #define E4_SLAVE_ADDRESS 0
  1989. #define E5_SLAVE_ADDRESS 0
  1990. #define E6_SLAVE_ADDRESS 0
  1991. #define E7_SLAVE_ADDRESS 0
  1992. /**
  1993. * Software enable
  1994. *
  1995. * Use for drivers that do not use a dedicated enable pin, but rather handle the same
  1996. * function through a communication line such as SPI or UART.
  1997. */
  1998. //#define SOFTWARE_DRIVER_ENABLE
  1999. /**
  2000. * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  2001. * Use Trinamic's ultra quiet stepping mode.
  2002. * When disabled, Marlin will use spreadCycle stepping mode.
  2003. */
  2004. #define STEALTHCHOP_XY
  2005. #define STEALTHCHOP_Z
  2006. #define STEALTHCHOP_E
  2007. /**
  2008. * Optimize spreadCycle chopper parameters by using predefined parameter sets
  2009. * or with the help of an example included in the library.
  2010. * Provided parameter sets are
  2011. * CHOPPER_DEFAULT_12V
  2012. * CHOPPER_DEFAULT_19V
  2013. * CHOPPER_DEFAULT_24V
  2014. * CHOPPER_DEFAULT_36V
  2015. * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
  2016. * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
  2017. *
  2018. * Define you own with
  2019. * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
  2020. */
  2021. #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
  2022. /**
  2023. * Monitor Trinamic drivers
  2024. * for error conditions like overtemperature and short to ground.
  2025. * To manage over-temp Marlin can decrease the driver current until the error condition clears.
  2026. * Other detected conditions can be used to stop the current print.
  2027. * Relevant g-codes:
  2028. * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
  2029. * M911 - Report stepper driver overtemperature pre-warn condition.
  2030. * M912 - Clear stepper driver overtemperature pre-warn condition flag.
  2031. * M122 - Report driver parameters (Requires TMC_DEBUG)
  2032. */
  2033. //#define MONITOR_DRIVER_STATUS
  2034. #if ENABLED(MONITOR_DRIVER_STATUS)
  2035. #define CURRENT_STEP_DOWN 50 // [mA]
  2036. #define REPORT_CURRENT_CHANGE
  2037. #define STOP_ON_ERROR
  2038. #endif
  2039. /**
  2040. * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
  2041. * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
  2042. * This mode allows for faster movements at the expense of higher noise levels.
  2043. * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
  2044. * M913 X/Y/Z/E to live tune the setting
  2045. */
  2046. //#define HYBRID_THRESHOLD
  2047. #define X_HYBRID_THRESHOLD 100 // [mm/s]
  2048. #define X2_HYBRID_THRESHOLD 100
  2049. #define Y_HYBRID_THRESHOLD 100
  2050. #define Y2_HYBRID_THRESHOLD 100
  2051. #define Z_HYBRID_THRESHOLD 3
  2052. #define Z2_HYBRID_THRESHOLD 3
  2053. #define Z3_HYBRID_THRESHOLD 3
  2054. #define Z4_HYBRID_THRESHOLD 3
  2055. #define E0_HYBRID_THRESHOLD 30
  2056. #define E1_HYBRID_THRESHOLD 30
  2057. #define E2_HYBRID_THRESHOLD 30
  2058. #define E3_HYBRID_THRESHOLD 30
  2059. #define E4_HYBRID_THRESHOLD 30
  2060. #define E5_HYBRID_THRESHOLD 30
  2061. #define E6_HYBRID_THRESHOLD 30
  2062. #define E7_HYBRID_THRESHOLD 30
  2063. /**
  2064. * Use StallGuard2 to home / probe X, Y, Z.
  2065. *
  2066. * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
  2067. * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
  2068. * X, Y, and Z homing will always be done in spreadCycle mode.
  2069. *
  2070. * X/Y/Z_STALL_SENSITIVITY is the default stall threshold.
  2071. * Use M914 X Y Z to set the stall threshold at runtime:
  2072. *
  2073. * Sensitivity TMC2209 Others
  2074. * HIGHEST 255 -64 (Too sensitive => False positive)
  2075. * LOWEST 0 63 (Too insensitive => No trigger)
  2076. *
  2077. * It is recommended to set HOMING_BUMP_MM to { 0, 0, 0 }.
  2078. *
  2079. * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only ***
  2080. * Poll the driver through SPI to determine load when homing.
  2081. * Removes the need for a wire from DIAG1 to an endstop pin.
  2082. *
  2083. * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
  2084. * homing and adds a guard period for endstop triggering.
  2085. */
  2086. //#define SENSORLESS_HOMING // StallGuard capable drivers only
  2087. #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
  2088. // TMC2209: 0...255. TMC2130: -64...63
  2089. #define X_STALL_SENSITIVITY 8
  2090. #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY
  2091. #define Y_STALL_SENSITIVITY 8
  2092. #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY
  2093. //#define Z_STALL_SENSITIVITY 8
  2094. //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  2095. //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  2096. //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY
  2097. //#define SPI_ENDSTOPS // TMC2130 only
  2098. //#define IMPROVE_HOMING_RELIABILITY
  2099. #endif
  2100. /**
  2101. * TMC Homing stepper phase.
  2102. *
  2103. * Improve homing repeatability by homing to stepper coil's nearest absolute
  2104. * phase position. Trinamic drivers use a stepper phase table with 1024 values
  2105. * spanning 4 full steps with 256 positions each (ergo, 1024 positions).
  2106. * Full step positions (128, 384, 640, 896) have the highest holding torque.
  2107. *
  2108. * Values from 0..1023, -1 to disable homing phase for that axis.
  2109. */
  2110. //#define TMC_HOME_PHASE { 896, 896, 896 }
  2111. /**
  2112. * Beta feature!
  2113. * Create a 50/50 square wave step pulse optimal for stepper drivers.
  2114. */
  2115. //#define SQUARE_WAVE_STEPPING
  2116. /**
  2117. * Enable M122 debugging command for TMC stepper drivers.
  2118. * M122 S0/1 will enable continous reporting.
  2119. */
  2120. //#define TMC_DEBUG
  2121. /**
  2122. * You can set your own advanced settings by filling in predefined functions.
  2123. * A list of available functions can be found on the library github page
  2124. * https://github.com/teemuatlut/TMCStepper
  2125. *
  2126. * Example:
  2127. * #define TMC_ADV() { \
  2128. * stepperX.diag0_otpw(1); \
  2129. * stepperY.intpol(0); \
  2130. * }
  2131. */
  2132. #define TMC_ADV() { }
  2133. #endif // HAS_TRINAMIC_CONFIG
  2134. // @section L64XX
  2135. /**
  2136. * L64XX Stepper Driver options
  2137. *
  2138. * Arduino-L6470 library (0.8.0 or higher) is required.
  2139. * https://github.com/ameyer/Arduino-L6470
  2140. *
  2141. * Requires the following to be defined in your pins_YOUR_BOARD file
  2142. * L6470_CHAIN_SCK_PIN
  2143. * L6470_CHAIN_MISO_PIN
  2144. * L6470_CHAIN_MOSI_PIN
  2145. * L6470_CHAIN_SS_PIN
  2146. * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset
  2147. */
  2148. #if HAS_L64XX
  2149. //#define L6470_CHITCHAT // Display additional status info
  2150. #if AXIS_IS_L64XX(X)
  2151. #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16
  2152. #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current
  2153. // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down
  2154. // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down
  2155. #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down)
  2156. // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down
  2157. // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down
  2158. // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current
  2159. #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474
  2160. #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI
  2161. #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest
  2162. #endif
  2163. #if AXIS_IS_L64XX(X2)
  2164. #define X2_MICROSTEPS 128
  2165. #define X2_OVERCURRENT 2000
  2166. #define X2_STALLCURRENT 1500
  2167. #define X2_MAX_VOLTAGE 127
  2168. #define X2_CHAIN_POS -1
  2169. #define X2_SLEW_RATE 1
  2170. #endif
  2171. #if AXIS_IS_L64XX(Y)
  2172. #define Y_MICROSTEPS 128
  2173. #define Y_OVERCURRENT 2000
  2174. #define Y_STALLCURRENT 1500
  2175. #define Y_MAX_VOLTAGE 127
  2176. #define Y_CHAIN_POS -1
  2177. #define Y_SLEW_RATE 1
  2178. #endif
  2179. #if AXIS_IS_L64XX(Y2)
  2180. #define Y2_MICROSTEPS 128
  2181. #define Y2_OVERCURRENT 2000
  2182. #define Y2_STALLCURRENT 1500
  2183. #define Y2_MAX_VOLTAGE 127
  2184. #define Y2_CHAIN_POS -1
  2185. #define Y2_SLEW_RATE 1
  2186. #endif
  2187. #if AXIS_IS_L64XX(Z)
  2188. #define Z_MICROSTEPS 128
  2189. #define Z_OVERCURRENT 2000
  2190. #define Z_STALLCURRENT 1500
  2191. #define Z_MAX_VOLTAGE 127
  2192. #define Z_CHAIN_POS -1
  2193. #define Z_SLEW_RATE 1
  2194. #endif
  2195. #if AXIS_IS_L64XX(Z2)
  2196. #define Z2_MICROSTEPS 128
  2197. #define Z2_OVERCURRENT 2000
  2198. #define Z2_STALLCURRENT 1500
  2199. #define Z2_MAX_VOLTAGE 127
  2200. #define Z2_CHAIN_POS -1
  2201. #define Z2_SLEW_RATE 1
  2202. #endif
  2203. #if AXIS_IS_L64XX(Z3)
  2204. #define Z3_MICROSTEPS 128
  2205. #define Z3_OVERCURRENT 2000
  2206. #define Z3_STALLCURRENT 1500
  2207. #define Z3_MAX_VOLTAGE 127
  2208. #define Z3_CHAIN_POS -1
  2209. #define Z3_SLEW_RATE 1
  2210. #endif
  2211. #if AXIS_IS_L64XX(Z4)
  2212. #define Z4_MICROSTEPS 128
  2213. #define Z4_OVERCURRENT 2000
  2214. #define Z4_STALLCURRENT 1500
  2215. #define Z4_MAX_VOLTAGE 127
  2216. #define Z4_CHAIN_POS -1
  2217. #define Z4_SLEW_RATE 1
  2218. #endif
  2219. #if AXIS_IS_L64XX(E0)
  2220. #define E0_MICROSTEPS 128
  2221. #define E0_OVERCURRENT 2000
  2222. #define E0_STALLCURRENT 1500
  2223. #define E0_MAX_VOLTAGE 127
  2224. #define E0_CHAIN_POS -1
  2225. #define E0_SLEW_RATE 1
  2226. #endif
  2227. #if AXIS_IS_L64XX(E1)
  2228. #define E1_MICROSTEPS 128
  2229. #define E1_OVERCURRENT 2000
  2230. #define E1_STALLCURRENT 1500
  2231. #define E1_MAX_VOLTAGE 127
  2232. #define E1_CHAIN_POS -1
  2233. #define E1_SLEW_RATE 1
  2234. #endif
  2235. #if AXIS_IS_L64XX(E2)
  2236. #define E2_MICROSTEPS 128
  2237. #define E2_OVERCURRENT 2000
  2238. #define E2_STALLCURRENT 1500
  2239. #define E2_MAX_VOLTAGE 127
  2240. #define E2_CHAIN_POS -1
  2241. #define E2_SLEW_RATE 1
  2242. #endif
  2243. #if AXIS_IS_L64XX(E3)
  2244. #define E3_MICROSTEPS 128
  2245. #define E3_OVERCURRENT 2000
  2246. #define E3_STALLCURRENT 1500
  2247. #define E3_MAX_VOLTAGE 127
  2248. #define E3_CHAIN_POS -1
  2249. #define E3_SLEW_RATE 1
  2250. #endif
  2251. #if AXIS_IS_L64XX(E4)
  2252. #define E4_MICROSTEPS 128
  2253. #define E4_OVERCURRENT 2000
  2254. #define E4_STALLCURRENT 1500
  2255. #define E4_MAX_VOLTAGE 127
  2256. #define E4_CHAIN_POS -1
  2257. #define E4_SLEW_RATE 1
  2258. #endif
  2259. #if AXIS_IS_L64XX(E5)
  2260. #define E5_MICROSTEPS 128
  2261. #define E5_OVERCURRENT 2000
  2262. #define E5_STALLCURRENT 1500
  2263. #define E5_MAX_VOLTAGE 127
  2264. #define E5_CHAIN_POS -1
  2265. #define E5_SLEW_RATE 1
  2266. #endif
  2267. #if AXIS_IS_L64XX(E6)
  2268. #define E6_MICROSTEPS 128
  2269. #define E6_OVERCURRENT 2000
  2270. #define E6_STALLCURRENT 1500
  2271. #define E6_MAX_VOLTAGE 127
  2272. #define E6_CHAIN_POS -1
  2273. #define E6_SLEW_RATE 1
  2274. #endif
  2275. #if AXIS_IS_L64XX(E7)
  2276. #define E7_MICROSTEPS 128
  2277. #define E7_OVERCURRENT 2000
  2278. #define E7_STALLCURRENT 1500
  2279. #define E7_MAX_VOLTAGE 127
  2280. #define E7_CHAIN_POS -1
  2281. #define E7_SLEW_RATE 1
  2282. #endif
  2283. /**
  2284. * Monitor L6470 drivers for error conditions like over temperature and over current.
  2285. * In the case of over temperature Marlin can decrease the drive until the error condition clears.
  2286. * Other detected conditions can be used to stop the current print.
  2287. * Relevant g-codes:
  2288. * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given.
  2289. * I not present or I0 or I1 - X, Y, Z or E0
  2290. * I2 - X2, Y2, Z2 or E1
  2291. * I3 - Z3 or E3
  2292. * I4 - Z4 or E4
  2293. * I5 - E5
  2294. * M916 - Increase drive level until get thermal warning
  2295. * M917 - Find minimum current thresholds
  2296. * M918 - Increase speed until max or error
  2297. * M122 S0/1 - Report driver parameters
  2298. */
  2299. //#define MONITOR_L6470_DRIVER_STATUS
  2300. #if ENABLED(MONITOR_L6470_DRIVER_STATUS)
  2301. #define KVAL_HOLD_STEP_DOWN 1
  2302. //#define L6470_STOP_ON_ERROR
  2303. #endif
  2304. #endif // HAS_L64XX
  2305. // @section i2cbus
  2306. //
  2307. // I2C Master ID for LPC176x LCD and Digital Current control
  2308. // Does not apply to other peripherals based on the Wire library.
  2309. //
  2310. //#define I2C_MASTER_ID 1 // Set a value from 0 to 2
  2311. /**
  2312. * TWI/I2C BUS
  2313. *
  2314. * This feature is an EXPERIMENTAL feature so it shall not be used on production
  2315. * machines. Enabling this will allow you to send and receive I2C data from slave
  2316. * devices on the bus.
  2317. *
  2318. * ; Example #1
  2319. * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
  2320. * ; It uses multiple M260 commands with one B<base 10> arg
  2321. * M260 A99 ; Target slave address
  2322. * M260 B77 ; M
  2323. * M260 B97 ; a
  2324. * M260 B114 ; r
  2325. * M260 B108 ; l
  2326. * M260 B105 ; i
  2327. * M260 B110 ; n
  2328. * M260 S1 ; Send the current buffer
  2329. *
  2330. * ; Example #2
  2331. * ; Request 6 bytes from slave device with address 0x63 (99)
  2332. * M261 A99 B5
  2333. *
  2334. * ; Example #3
  2335. * ; Example serial output of a M261 request
  2336. * echo:i2c-reply: from:99 bytes:5 data:hello
  2337. */
  2338. //#define EXPERIMENTAL_I2CBUS
  2339. #if ENABLED(EXPERIMENTAL_I2CBUS)
  2340. #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
  2341. #endif
  2342. // @section extras
  2343. /**
  2344. * Photo G-code
  2345. * Add the M240 G-code to take a photo.
  2346. * The photo can be triggered by a digital pin or a physical movement.
  2347. */
  2348. //#define PHOTO_GCODE
  2349. #if ENABLED(PHOTO_GCODE)
  2350. // A position to move to (and raise Z) before taking the photo
  2351. //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z)
  2352. //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P)
  2353. //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S)
  2354. // Canon RC-1 or homebrew digital camera trigger
  2355. // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
  2356. //#define PHOTOGRAPH_PIN 23
  2357. // Canon Hack Development Kit
  2358. // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
  2359. //#define CHDK_PIN 4
  2360. // Optional second move with delay to trigger the camera shutter
  2361. //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J)
  2362. // Duration to hold the switch or keep CHDK_PIN high
  2363. //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D)
  2364. /**
  2365. * PHOTO_PULSES_US may need adjustment depending on board and camera model.
  2366. * Pin must be running at 48.4kHz.
  2367. * Be sure to use a PHOTOGRAPH_PIN which can rise and fall quick enough.
  2368. * (e.g., MKS SBase temp sensor pin was too slow, so used P1.23 on J8.)
  2369. *
  2370. * Example pulse data for Nikon: https://bit.ly/2FKD0Aq
  2371. * IR Wiring: https://git.io/JvJf7
  2372. */
  2373. //#define PHOTO_PULSES_US { 2000, 27850, 400, 1580, 400, 3580, 400 } // (µs) Durations for each 48.4kHz oscillation
  2374. #ifdef PHOTO_PULSES_US
  2375. #define PHOTO_PULSE_DELAY_US 13 // (µs) Approximate duration of each HIGH and LOW pulse in the oscillation
  2376. #endif
  2377. #endif
  2378. /**
  2379. * Spindle & Laser control
  2380. *
  2381. * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
  2382. * to set spindle speed, spindle direction, and laser power.
  2383. *
  2384. * SuperPid is a router/spindle speed controller used in the CNC milling community.
  2385. * Marlin can be used to turn the spindle on and off. It can also be used to set
  2386. * the spindle speed from 5,000 to 30,000 RPM.
  2387. *
  2388. * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V
  2389. * hardware PWM pin for the speed control and a pin for the rotation direction.
  2390. *
  2391. * See https://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
  2392. */
  2393. //#define SPINDLE_FEATURE
  2394. //#define LASER_FEATURE
  2395. #if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
  2396. #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
  2397. #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
  2398. #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
  2399. #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
  2400. /**
  2401. * Speed / Power can be set ('M3 S') and displayed in terms of:
  2402. * - PWM255 (S0 - S255)
  2403. * - PERCENT (S0 - S100)
  2404. * - RPM (S0 - S50000) Best for use with a spindle
  2405. */
  2406. #define CUTTER_POWER_DISPLAY PWM255
  2407. /**
  2408. * Relative mode uses relative range (SPEED_POWER_MIN to SPEED_POWER_MAX) instead of normal range (0 to SPEED_POWER_MAX)
  2409. * Best use with SuperPID router controller where for example S0 = 5,000 RPM and S255 = 30,000 RPM
  2410. */
  2411. //#define CUTTER_POWER_RELATIVE // Set speed proportional to [SPEED_POWER_MIN...SPEED_POWER_MAX] instead of directly
  2412. #if ENABLED(SPINDLE_FEATURE)
  2413. //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
  2414. #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
  2415. #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
  2416. #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
  2417. #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
  2418. /**
  2419. * M3/M4 uses the following equation to convert speed/power to PWM duty cycle
  2420. * Power = ((DC / 255 * 100) - SPEED_POWER_INTERCEPT)) * (1 / SPEED_POWER_SLOPE)
  2421. * where PWM DC varies from 0 to 255
  2422. *
  2423. * Set these required parameters for your controller
  2424. */
  2425. #define SPEED_POWER_SLOPE 118.4 // SPEED_POWER_SLOPE = SPEED_POWER_MAX / 255
  2426. #define SPEED_POWER_INTERCEPT 0
  2427. #define SPEED_POWER_MIN 5000
  2428. #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
  2429. #define SPEED_POWER_STARTUP 25000 // The default value for speed power when M3 is called without arguments
  2430. #else
  2431. #define SPEED_POWER_SLOPE 0.3922 // SPEED_POWER_SLOPE = SPEED_POWER_MAX / 255
  2432. #define SPEED_POWER_INTERCEPT 0
  2433. #define SPEED_POWER_MIN 0
  2434. #define SPEED_POWER_MAX 100 // 0-100%
  2435. #define SPEED_POWER_STARTUP 80 // The default value for speed power when M3 is called without arguments
  2436. /**
  2437. * Enable inline laser power to be handled in the planner / stepper routines.
  2438. * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)
  2439. * or by the 'S' parameter in G0/G1/G2/G3 moves (see LASER_MOVE_POWER).
  2440. *
  2441. * This allows the laser to keep in perfect sync with the planner and removes
  2442. * the powerup/down delay since lasers require negligible time.
  2443. */
  2444. #define LASER_POWER_INLINE
  2445. #if ENABLED(LASER_POWER_INLINE)
  2446. /**
  2447. * Scale the laser's power in proportion to the movement rate.
  2448. *
  2449. * - Sets the entry power proportional to the entry speed over the nominal speed.
  2450. * - Ramps the power up every N steps to approximate the speed trapezoid.
  2451. * - Due to the limited power resolution this is only approximate.
  2452. */
  2453. #define LASER_POWER_INLINE_TRAPEZOID
  2454. /**
  2455. * Continuously calculate the current power (nominal_power * current_rate / nominal_rate).
  2456. * Required for accurate power with non-trapezoidal acceleration (e.g., S_CURVE_ACCELERATION).
  2457. * This is a costly calculation so this option is discouraged on 8-bit AVR boards.
  2458. *
  2459. * LASER_POWER_INLINE_TRAPEZOID_CONT_PER defines how many step cycles there are between power updates. If your
  2460. * board isn't able to generate steps fast enough (and you are using LASER_POWER_INLINE_TRAPEZOID_CONT), increase this.
  2461. * Note that when this is zero it means it occurs every cycle; 1 means a delay wait one cycle then run, etc.
  2462. */
  2463. //#define LASER_POWER_INLINE_TRAPEZOID_CONT
  2464. /**
  2465. * Stepper iterations between power updates. Increase this value if the board
  2466. * can't keep up with the processing demands of LASER_POWER_INLINE_TRAPEZOID_CONT.
  2467. * Disable (or set to 0) to recalculate power on every stepper iteration.
  2468. */
  2469. //#define LASER_POWER_INLINE_TRAPEZOID_CONT_PER 10
  2470. /**
  2471. * Include laser power in G0/G1/G2/G3/G5 commands with the 'S' parameter
  2472. */
  2473. //#define LASER_MOVE_POWER
  2474. #if ENABLED(LASER_MOVE_POWER)
  2475. // Turn off the laser on G0 moves with no power parameter.
  2476. // If a power parameter is provided, use that instead.
  2477. //#define LASER_MOVE_G0_OFF
  2478. #endif
  2479. /**
  2480. * Inline flag inverted
  2481. *
  2482. * WARNING: M5 will NOT turn off the laser unless another move
  2483. * is done (so G-code files must end with 'M5 I').
  2484. */
  2485. //#define LASER_POWER_INLINE_INVERT
  2486. /**
  2487. * Continuously apply inline power. ('M3 S3' == 'G1 S3' == 'M3 S3 I')
  2488. *
  2489. * The laser might do some weird things, so only enable this
  2490. * feature if you understand the implications.
  2491. */
  2492. //#define LASER_POWER_INLINE_CONTINUOUS
  2493. #else
  2494. #define SPINDLE_LASER_POWERUP_DELAY 50 // (ms) Delay to allow the spindle/laser to come up to speed/power
  2495. #define SPINDLE_LASER_POWERDOWN_DELAY 50 // (ms) Delay to allow the spindle to stop
  2496. #endif
  2497. #endif
  2498. #endif
  2499. /**
  2500. * Coolant Control
  2501. *
  2502. * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
  2503. *
  2504. * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
  2505. */
  2506. //#define COOLANT_CONTROL
  2507. #if ENABLED(COOLANT_CONTROL)
  2508. #define COOLANT_MIST // Enable if mist coolant is present
  2509. #define COOLANT_FLOOD // Enable if flood coolant is present
  2510. #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
  2511. #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
  2512. #endif
  2513. /**
  2514. * Filament Width Sensor
  2515. *
  2516. * Measures the filament width in real-time and adjusts
  2517. * flow rate to compensate for any irregularities.
  2518. *
  2519. * Also allows the measured filament diameter to set the
  2520. * extrusion rate, so the slicer only has to specify the
  2521. * volume.
  2522. *
  2523. * Only a single extruder is supported at this time.
  2524. *
  2525. * 34 RAMPS_14 : Analog input 5 on the AUX2 connector
  2526. * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
  2527. * 301 RAMBO : Analog input 3
  2528. *
  2529. * Note: May require analog pins to be defined for other boards.
  2530. */
  2531. //#define FILAMENT_WIDTH_SENSOR
  2532. #if ENABLED(FILAMENT_WIDTH_SENSOR)
  2533. #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
  2534. #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
  2535. #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it
  2536. #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
  2537. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
  2538. // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
  2539. //#define FILAMENT_LCD_DISPLAY
  2540. #endif
  2541. /**
  2542. * CNC Coordinate Systems
  2543. *
  2544. * Enables G53 and G54-G59.3 commands to select coordinate systems
  2545. * and G92.1 to reset the workspace to native machine space.
  2546. */
  2547. //#define CNC_COORDINATE_SYSTEMS
  2548. /**
  2549. * Auto-report temperatures with M155 S<seconds>
  2550. */
  2551. #define AUTO_REPORT_TEMPERATURES
  2552. /**
  2553. * Include capabilities in M115 output
  2554. */
  2555. #define EXTENDED_CAPABILITIES_REPORT
  2556. /**
  2557. * Expected Printer Check
  2558. * Add the M16 G-code to compare a string to the MACHINE_NAME.
  2559. * M16 with a non-matching string causes the printer to halt.
  2560. */
  2561. //#define EXPECTED_PRINTER_CHECK
  2562. /**
  2563. * Disable all Volumetric extrusion options
  2564. */
  2565. //#define NO_VOLUMETRICS
  2566. #if DISABLED(NO_VOLUMETRICS)
  2567. /**
  2568. * Volumetric extrusion default state
  2569. * Activate to make volumetric extrusion the default method,
  2570. * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  2571. *
  2572. * M200 D0 to disable, M200 Dn to set a new diameter.
  2573. */
  2574. //#define VOLUMETRIC_DEFAULT_ON
  2575. #endif
  2576. /**
  2577. * Enable this option for a leaner build of Marlin that removes all
  2578. * workspace offsets, simplifying coordinate transformations, leveling, etc.
  2579. *
  2580. * - M206 and M428 are disabled.
  2581. * - G92 will revert to its behavior from Marlin 1.0.
  2582. */
  2583. //#define NO_WORKSPACE_OFFSETS
  2584. /**
  2585. * Set the number of proportional font spaces required to fill up a typical character space.
  2586. * This can help to better align the output of commands like `G29 O` Mesh Output.
  2587. *
  2588. * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
  2589. * Otherwise, adjust according to your client and font.
  2590. */
  2591. #define PROPORTIONAL_FONT_RATIO 1.0
  2592. /**
  2593. * Spend 28 bytes of SRAM to optimize the GCode parser
  2594. */
  2595. #define FASTER_GCODE_PARSER
  2596. #if ENABLED(FASTER_GCODE_PARSER)
  2597. //#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
  2598. #endif
  2599. //#define GCODE_CASE_INSENSITIVE // Accept G-code sent to the firmware in lowercase
  2600. /**
  2601. * CNC G-code options
  2602. * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
  2603. * Note that G0 feedrates should be used with care for 3D printing (if used at all).
  2604. * High feedrates may cause ringing and harm print quality.
  2605. */
  2606. //#define PAREN_COMMENTS // Support for parentheses-delimited comments
  2607. //#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
  2608. // Enable and set a (default) feedrate for all G0 moves
  2609. //#define G0_FEEDRATE 3000 // (mm/m)
  2610. #ifdef G0_FEEDRATE
  2611. //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
  2612. #endif
  2613. /**
  2614. * Startup commands
  2615. *
  2616. * Execute certain G-code commands immediately after power-on.
  2617. */
  2618. //#define STARTUP_COMMANDS "M17 Z"
  2619. /**
  2620. * G-code Macros
  2621. *
  2622. * Add G-codes M810-M819 to define and run G-code macros.
  2623. * Macros are not saved to EEPROM.
  2624. */
  2625. //#define GCODE_MACROS
  2626. #if ENABLED(GCODE_MACROS)
  2627. #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
  2628. #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
  2629. #endif
  2630. /**
  2631. * User-defined menu items that execute custom GCode
  2632. */
  2633. //#define CUSTOM_USER_MENUS
  2634. #if ENABLED(CUSTOM_USER_MENUS)
  2635. //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
  2636. #define USER_SCRIPT_DONE "M117 User Script Done"
  2637. #define USER_SCRIPT_AUDIBLE_FEEDBACK
  2638. //#define USER_SCRIPT_RETURN // Return to status screen after a script
  2639. #define USER_DESC_1 "Home & UBL Info"
  2640. #define USER_GCODE_1 "G28\nG29 W"
  2641. #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
  2642. #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
  2643. #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
  2644. #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
  2645. #define USER_DESC_4 "Heat Bed/Home/Level"
  2646. #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
  2647. #define USER_DESC_5 "Home & Info"
  2648. #define USER_GCODE_5 "G28\nM503"
  2649. #endif
  2650. /**
  2651. * Host Action Commands
  2652. *
  2653. * Define host streamer action commands in compliance with the standard.
  2654. *
  2655. * See https://reprap.org/wiki/G-code#Action_commands
  2656. * Common commands ........ poweroff, pause, paused, resume, resumed, cancel
  2657. * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
  2658. *
  2659. * Some features add reason codes to extend these commands.
  2660. *
  2661. * Host Prompt Support enables Marlin to use the host for user prompts so
  2662. * filament runout and other processes can be managed from the host side.
  2663. */
  2664. //#define HOST_ACTION_COMMANDS
  2665. #if ENABLED(HOST_ACTION_COMMANDS)
  2666. //#define HOST_PROMPT_SUPPORT
  2667. #endif
  2668. /**
  2669. * Cancel Objects
  2670. *
  2671. * Implement M486 to allow Marlin to skip objects
  2672. */
  2673. //#define CANCEL_OBJECTS
  2674. /**
  2675. * I2C position encoders for closed loop control.
  2676. * Developed by Chris Barr at Aus3D.
  2677. *
  2678. * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder
  2679. * Github: https://github.com/Aus3D/MagneticEncoder
  2680. *
  2681. * Supplier: http://aus3d.com.au/magnetic-encoder-module
  2682. * Alternative Supplier: http://reliabuild3d.com/
  2683. *
  2684. * Reliabuild encoders have been modified to improve reliability.
  2685. */
  2686. //#define I2C_POSITION_ENCODERS
  2687. #if ENABLED(I2C_POSITION_ENCODERS)
  2688. #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5
  2689. // encoders supported currently.
  2690. #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200.
  2691. #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. <X|Y|Z|E>_AXIS.
  2692. #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or-
  2693. // I2CPE_ENC_TYPE_ROTARY.
  2694. #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for
  2695. // 1mm poles. For linear encoders this is ticks / mm,
  2696. // for rotary encoders this is ticks / revolution.
  2697. //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
  2698. // steps per full revolution (motor steps/rev * microstepping)
  2699. //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
  2700. #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
  2701. #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
  2702. // printer will attempt to correct the error; errors
  2703. // smaller than this are ignored to minimize effects of
  2704. // measurement noise / latency (filter).
  2705. #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2.
  2706. #define I2CPE_ENC_2_AXIS Y_AXIS
  2707. #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR
  2708. #define I2CPE_ENC_2_TICKS_UNIT 2048
  2709. //#define I2CPE_ENC_2_TICKS_REV (16 * 200)
  2710. //#define I2CPE_ENC_2_INVERT
  2711. #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP
  2712. #define I2CPE_ENC_2_EC_THRESH 0.10
  2713. #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options
  2714. #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below.
  2715. #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4.
  2716. #define I2CPE_ENC_4_AXIS E_AXIS
  2717. #define I2CPE_ENC_5_ADDR 34 // Encoder 5.
  2718. #define I2CPE_ENC_5_AXIS E_AXIS
  2719. // Default settings for encoders which are enabled, but without settings configured above.
  2720. #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR
  2721. #define I2CPE_DEF_ENC_TICKS_UNIT 2048
  2722. #define I2CPE_DEF_TICKS_REV (16 * 200)
  2723. #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE
  2724. #define I2CPE_DEF_EC_THRESH 0.1
  2725. //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
  2726. // axis after which the printer will abort. Comment out to
  2727. // disable abort behavior.
  2728. #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
  2729. // for this amount of time (in ms) before the encoder
  2730. // is trusted again.
  2731. /**
  2732. * Position is checked every time a new command is executed from the buffer but during long moves,
  2733. * this setting determines the minimum update time between checks. A value of 100 works well with
  2734. * error rolling average when attempting to correct only for skips and not for vibration.
  2735. */
  2736. #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks.
  2737. // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
  2738. #define I2CPE_ERR_ROLLING_AVERAGE
  2739. #endif // I2C_POSITION_ENCODERS
  2740. /**
  2741. * Analog Joystick(s)
  2742. */
  2743. //#define JOYSTICK
  2744. #if ENABLED(JOYSTICK)
  2745. #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2
  2746. #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2
  2747. #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
  2748. #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
  2749. //#define INVERT_JOY_X // Enable if X direction is reversed
  2750. //#define INVERT_JOY_Y // Enable if Y direction is reversed
  2751. //#define INVERT_JOY_Z // Enable if Z direction is reversed
  2752. // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
  2753. #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
  2754. #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
  2755. #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
  2756. #endif
  2757. /**
  2758. * MAX7219 Debug Matrix
  2759. *
  2760. * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
  2761. * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  2762. */
  2763. //#define MAX7219_DEBUG
  2764. #if ENABLED(MAX7219_DEBUG)
  2765. #define MAX7219_CLK_PIN 64
  2766. #define MAX7219_DIN_PIN 57
  2767. #define MAX7219_LOAD_PIN 44
  2768. //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
  2769. #define MAX7219_INIT_TEST 2 // Test pattern at startup: 0=none, 1=sweep, 2=spiral
  2770. #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
  2771. #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
  2772. // connector at: right=0 bottom=-90 top=90 left=180
  2773. //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
  2774. //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side
  2775. /**
  2776. * Sample debug features
  2777. * If you add more debug displays, be careful to avoid conflicts!
  2778. */
  2779. #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
  2780. #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row
  2781. #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row
  2782. #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row
  2783. // If you experience stuttering, reboots, etc. this option can reveal how
  2784. // tweaks made to the configuration are affecting the printer in real-time.
  2785. #endif
  2786. /**
  2787. * NanoDLP Sync support
  2788. *
  2789. * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  2790. * string to enable synchronization with DLP projector exposure. This change will allow to use
  2791. * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  2792. */
  2793. //#define NANODLP_Z_SYNC
  2794. #if ENABLED(NANODLP_Z_SYNC)
  2795. //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
  2796. // Default behavior is limited to Z axis only.
  2797. #endif
  2798. /**
  2799. * WiFi Support (Espressif ESP32 WiFi)
  2800. */
  2801. //#define WIFISUPPORT // Marlin embedded WiFi managenent
  2802. //#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)
  2803. #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
  2804. //#define WEBSUPPORT // Start a webserver (which may include auto-discovery)
  2805. //#define OTASUPPORT // Support over-the-air firmware updates
  2806. //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
  2807. /**
  2808. * To set a default WiFi SSID / Password, create a file called Configuration_Secure.h with
  2809. * the following defines, customized for your network. This specific file is excluded via
  2810. * .gitignore to prevent it from accidentally leaking to the public.
  2811. *
  2812. * #define WIFI_SSID "WiFi SSID"
  2813. * #define WIFI_PWD "WiFi Password"
  2814. */
  2815. //#include "Configuration_Secure.h" // External file with WiFi SSID / Password
  2816. #endif
  2817. /**
  2818. * Prusa Multi-Material Unit v2
  2819. * Enable in Configuration.h
  2820. */
  2821. #if ENABLED(PRUSA_MMU2)
  2822. // Serial port used for communication with MMU2.
  2823. // For AVR enable the UART port used for the MMU. (e.g., internalSerial)
  2824. // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2)
  2825. #define INTERNAL_SERIAL_PORT 2
  2826. #define MMU2_SERIAL internalSerial
  2827. // Use hardware reset for MMU if a pin is defined for it
  2828. //#define MMU2_RST_PIN 23
  2829. // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
  2830. //#define MMU2_MODE_12V
  2831. // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
  2832. #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
  2833. // Add an LCD menu for MMU2
  2834. //#define MMU2_MENUS
  2835. #if ENABLED(MMU2_MENUS)
  2836. // Settings for filament load / unload from the LCD menu.
  2837. // This is for Prusa MK3-style extruders. Customize for your hardware.
  2838. #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
  2839. #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
  2840. { 7.2, 562 }, \
  2841. { 14.4, 871 }, \
  2842. { 36.0, 1393 }, \
  2843. { 14.4, 871 }, \
  2844. { 50.0, 198 }
  2845. #define MMU2_RAMMING_SEQUENCE \
  2846. { 1.0, 1000 }, \
  2847. { 1.0, 1500 }, \
  2848. { 2.0, 2000 }, \
  2849. { 1.5, 3000 }, \
  2850. { 2.5, 4000 }, \
  2851. { -15.0, 5000 }, \
  2852. { -14.0, 1200 }, \
  2853. { -6.0, 600 }, \
  2854. { 10.0, 700 }, \
  2855. { -10.0, 400 }, \
  2856. { -50.0, 2000 }
  2857. #endif
  2858. // Using a sensor like the MMU2S
  2859. //#define PRUSA_MMU2_S_MODE
  2860. #if ENABLED(PRUSA_MMU2_S_MODE)
  2861. #define MMU2_C0_RETRY 5 // Number of retries (total time = timeout*retries)
  2862. #define MMU2_CAN_LOAD_FEEDRATE 800 // (mm/m)
  2863. #define MMU2_CAN_LOAD_SEQUENCE \
  2864. { 0.1, MMU2_CAN_LOAD_FEEDRATE }, \
  2865. { 60.0, MMU2_CAN_LOAD_FEEDRATE }, \
  2866. { -52.0, MMU2_CAN_LOAD_FEEDRATE }
  2867. #define MMU2_CAN_LOAD_RETRACT 6.0 // (mm) Keep under the distance between Load Sequence values
  2868. #define MMU2_CAN_LOAD_DEVIATION 0.8 // (mm) Acceptable deviation
  2869. #define MMU2_CAN_LOAD_INCREMENT 0.2 // (mm) To reuse within MMU2 module
  2870. #define MMU2_CAN_LOAD_INCREMENT_SEQUENCE \
  2871. { -MMU2_CAN_LOAD_INCREMENT, MMU2_CAN_LOAD_FEEDRATE }
  2872. #endif
  2873. //#define MMU2_DEBUG // Write debug info to serial output
  2874. #endif // PRUSA_MMU2
  2875. /**
  2876. * Advanced Print Counter settings
  2877. */
  2878. #if ENABLED(PRINTCOUNTER)
  2879. #define SERVICE_WARNING_BUZZES 3
  2880. // Activate up to 3 service interval watchdogs
  2881. //#define SERVICE_NAME_1 "Service S"
  2882. //#define SERVICE_INTERVAL_1 100 // print hours
  2883. //#define SERVICE_NAME_2 "Service L"
  2884. //#define SERVICE_INTERVAL_2 200 // print hours
  2885. //#define SERVICE_NAME_3 "Service 3"
  2886. //#define SERVICE_INTERVAL_3 1 // print hours
  2887. #endif
  2888. // @section develop
  2889. //
  2890. // M100 Free Memory Watcher to debug memory usage
  2891. //
  2892. //#define M100_FREE_MEMORY_WATCHER
  2893. //
  2894. // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
  2895. //
  2896. //#define PINS_DEBUGGING
  2897. // Enable Marlin dev mode which adds some special commands
  2898. //#define MARLIN_DEV_MODE