My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Conditionals_post.h 23KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Conditionals_post.h
  24. * Defines that depend on configuration but are not editable.
  25. */
  26. #ifndef CONDITIONALS_POST_H
  27. #define CONDITIONALS_POST_H
  28. #if ENABLED(EMERGENCY_PARSER)
  29. #define EMERGENCY_PARSER_CAPABILITIES " EMERGENCY_CODES:M108,M112,M410"
  30. #else
  31. #define EMERGENCY_PARSER_CAPABILITIES ""
  32. #endif
  33. /**
  34. * Axis lengths and center
  35. */
  36. #define X_MAX_LENGTH (X_MAX_POS - (X_MIN_POS))
  37. #define Y_MAX_LENGTH (Y_MAX_POS - (Y_MIN_POS))
  38. #define Z_MAX_LENGTH (Z_MAX_POS - (Z_MIN_POS))
  39. #define X_CENTER float((X_MIN_POS + X_MAX_POS) * 0.5)
  40. #define Y_CENTER float((Y_MIN_POS + Y_MAX_POS) * 0.5)
  41. #define Z_CENTER float((Z_MIN_POS + Z_MAX_POS) * 0.5)
  42. /**
  43. * CoreXY and CoreXZ
  44. */
  45. #if ENABLED(COREXY)
  46. #define CORE_AXIS_1 A_AXIS // XY from A + B
  47. #define CORE_AXIS_2 B_AXIS
  48. #define NORMAL_AXIS Z_AXIS
  49. #elif ENABLED(COREXZ)
  50. #define CORE_AXIS_1 A_AXIS // XZ from A + C
  51. #define CORE_AXIS_2 C_AXIS
  52. #define NORMAL_AXIS Y_AXIS
  53. #elif ENABLED(COREYZ)
  54. #define CORE_AXIS_1 B_AXIS // YZ from B + C
  55. #define CORE_AXIS_2 C_AXIS
  56. #define NORMAL_AXIS X_AXIS
  57. #endif
  58. #define IS_SCARA (ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA))
  59. #define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
  60. #define IS_CARTESIAN !IS_KINEMATIC
  61. /**
  62. * SCARA cannot use SLOWDOWN and requires QUICKHOME
  63. */
  64. #if IS_SCARA
  65. #undef SLOWDOWN
  66. #define QUICK_HOME
  67. #endif
  68. /**
  69. * Set the home position based on settings or manual overrides
  70. */
  71. #ifdef MANUAL_X_HOME_POS
  72. #define X_HOME_POS MANUAL_X_HOME_POS
  73. #elif ENABLED(BED_CENTER_AT_0_0)
  74. #if ENABLED(DELTA)
  75. #define X_HOME_POS 0
  76. #else
  77. #define X_HOME_POS ((X_MAX_LENGTH) * (X_HOME_DIR) * 0.5)
  78. #endif
  79. #else
  80. #if ENABLED(DELTA)
  81. #define X_HOME_POS (X_MIN_POS + (X_MAX_LENGTH) * 0.5)
  82. #else
  83. #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
  84. #endif
  85. #endif
  86. #ifdef MANUAL_Y_HOME_POS
  87. #define Y_HOME_POS MANUAL_Y_HOME_POS
  88. #elif ENABLED(BED_CENTER_AT_0_0)
  89. #if ENABLED(DELTA)
  90. #define Y_HOME_POS 0
  91. #else
  92. #define Y_HOME_POS ((Y_MAX_LENGTH) * (Y_HOME_DIR) * 0.5)
  93. #endif
  94. #else
  95. #if ENABLED(DELTA)
  96. #define Y_HOME_POS (Y_MIN_POS + (Y_MAX_LENGTH) * 0.5)
  97. #else
  98. #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
  99. #endif
  100. #endif
  101. #ifdef MANUAL_Z_HOME_POS
  102. #define Z_HOME_POS MANUAL_Z_HOME_POS
  103. #else
  104. #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
  105. #endif
  106. /**
  107. * Auto Bed Leveling and Z Probe Repeatability Test
  108. */
  109. #define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))
  110. /**
  111. * Z Sled Probe requires Z_SAFE_HOMING
  112. */
  113. #if ENABLED(Z_PROBE_SLED)
  114. #define Z_SAFE_HOMING
  115. #endif
  116. /**
  117. * DELTA should ignore Z_SAFE_HOMING and SLOWDOWN
  118. */
  119. #if ENABLED(DELTA)
  120. #undef Z_SAFE_HOMING
  121. #undef SLOWDOWN
  122. #endif
  123. /**
  124. * Safe Homing Options
  125. */
  126. #if ENABLED(Z_SAFE_HOMING)
  127. #ifndef Z_SAFE_HOMING_X_POINT
  128. #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2)
  129. #endif
  130. #ifndef Z_SAFE_HOMING_Y_POINT
  131. #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2)
  132. #endif
  133. #define X_TILT_FULCRUM Z_SAFE_HOMING_X_POINT
  134. #define Y_TILT_FULCRUM Z_SAFE_HOMING_Y_POINT
  135. #else
  136. #define X_TILT_FULCRUM X_HOME_POS
  137. #define Y_TILT_FULCRUM Y_HOME_POS
  138. #endif
  139. /**
  140. * Host keep alive
  141. */
  142. #ifndef DEFAULT_KEEPALIVE_INTERVAL
  143. #define DEFAULT_KEEPALIVE_INTERVAL 2
  144. #endif
  145. /**
  146. * MAX_STEP_FREQUENCY differs for TOSHIBA
  147. */
  148. #if ENABLED(CONFIG_STEPPERS_TOSHIBA)
  149. #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
  150. #else
  151. #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
  152. #endif
  153. // MS1 MS2 Stepper Driver Microstepping mode table
  154. #define MICROSTEP1 LOW,LOW
  155. #define MICROSTEP2 HIGH,LOW
  156. #define MICROSTEP4 LOW,HIGH
  157. #define MICROSTEP8 HIGH,HIGH
  158. #define MICROSTEP16 HIGH,HIGH
  159. /**
  160. * Advance calculated values
  161. */
  162. #if ENABLED(ADVANCE)
  163. #define EXTRUSION_AREA (0.25 * (D_FILAMENT) * (D_FILAMENT) * M_PI)
  164. #define STEPS_PER_CUBIC_MM_E (axis_steps_per_mm[E_AXIS] / (EXTRUSION_AREA))
  165. #endif
  166. #if ENABLED(ULTIPANEL) && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER)
  167. #undef SD_DETECT_INVERTED
  168. #endif
  169. /**
  170. * Set defaults for missing (newer) options
  171. */
  172. #ifndef DISABLE_INACTIVE_X
  173. #define DISABLE_INACTIVE_X DISABLE_X
  174. #endif
  175. #ifndef DISABLE_INACTIVE_Y
  176. #define DISABLE_INACTIVE_Y DISABLE_Y
  177. #endif
  178. #ifndef DISABLE_INACTIVE_Z
  179. #define DISABLE_INACTIVE_Z DISABLE_Z
  180. #endif
  181. #ifndef DISABLE_INACTIVE_E
  182. #define DISABLE_INACTIVE_E DISABLE_E
  183. #endif
  184. // Power Signal Control Definitions
  185. // By default use ATX definition
  186. #ifndef POWER_SUPPLY
  187. #define POWER_SUPPLY 1
  188. #endif
  189. #if (POWER_SUPPLY == 1) // 1 = ATX
  190. #define PS_ON_AWAKE LOW
  191. #define PS_ON_ASLEEP HIGH
  192. #elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W
  193. #define PS_ON_AWAKE HIGH
  194. #define PS_ON_ASLEEP LOW
  195. #endif
  196. #define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
  197. /**
  198. * Temp Sensor defines
  199. */
  200. #if TEMP_SENSOR_0 == -3
  201. #define HEATER_0_USES_MAX6675
  202. #define MAX6675_IS_MAX31855
  203. #elif TEMP_SENSOR_0 == -2
  204. #define HEATER_0_USES_MAX6675
  205. #elif TEMP_SENSOR_0 == -1
  206. #define HEATER_0_USES_AD595
  207. #elif TEMP_SENSOR_0 == 0
  208. #undef HEATER_0_MINTEMP
  209. #undef HEATER_0_MAXTEMP
  210. #elif TEMP_SENSOR_0 > 0
  211. #define THERMISTORHEATER_0 TEMP_SENSOR_0
  212. #define HEATER_0_USES_THERMISTOR
  213. #endif
  214. #if TEMP_SENSOR_1 <= -2
  215. #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_1"
  216. #elif TEMP_SENSOR_1 == -1
  217. #define HEATER_1_USES_AD595
  218. #elif TEMP_SENSOR_1 == 0
  219. #undef HEATER_1_MINTEMP
  220. #undef HEATER_1_MAXTEMP
  221. #elif TEMP_SENSOR_1 > 0
  222. #define THERMISTORHEATER_1 TEMP_SENSOR_1
  223. #define HEATER_1_USES_THERMISTOR
  224. #endif
  225. #if TEMP_SENSOR_2 <= -2
  226. #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_2"
  227. #elif TEMP_SENSOR_2 == -1
  228. #define HEATER_2_USES_AD595
  229. #elif TEMP_SENSOR_2 == 0
  230. #undef HEATER_2_MINTEMP
  231. #undef HEATER_2_MAXTEMP
  232. #elif TEMP_SENSOR_2 > 0
  233. #define THERMISTORHEATER_2 TEMP_SENSOR_2
  234. #define HEATER_2_USES_THERMISTOR
  235. #endif
  236. #if TEMP_SENSOR_3 <= -2
  237. #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_3"
  238. #elif TEMP_SENSOR_3 == -1
  239. #define HEATER_3_USES_AD595
  240. #elif TEMP_SENSOR_3 == 0
  241. #undef HEATER_3_MINTEMP
  242. #undef HEATER_3_MAXTEMP
  243. #elif TEMP_SENSOR_3 > 0
  244. #define THERMISTORHEATER_3 TEMP_SENSOR_3
  245. #define HEATER_3_USES_THERMISTOR
  246. #endif
  247. #if TEMP_SENSOR_BED <= -2
  248. #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_BED"
  249. #elif TEMP_SENSOR_BED == -1
  250. #define BED_USES_AD595
  251. #elif TEMP_SENSOR_BED == 0
  252. #undef BED_MINTEMP
  253. #undef BED_MAXTEMP
  254. #elif TEMP_SENSOR_BED > 0
  255. #define THERMISTORBED TEMP_SENSOR_BED
  256. #define BED_USES_THERMISTOR
  257. #endif
  258. /**
  259. * Flags for PID handling
  260. */
  261. #define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED))
  262. #define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED))
  263. /**
  264. * Default hotend offsets, if not defined
  265. */
  266. #if HOTENDS > 1
  267. #ifndef HOTEND_OFFSET_X
  268. #define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
  269. #endif
  270. #ifndef HOTEND_OFFSET_Y
  271. #define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
  272. #endif
  273. #if !defined(HOTEND_OFFSET_Z) && (ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_EXTRUDER))
  274. #define HOTEND_OFFSET_Z { 0 }
  275. #endif
  276. #endif
  277. /**
  278. * ARRAY_BY_EXTRUDERS based on EXTRUDERS
  279. */
  280. #define ARRAY_BY_EXTRUDERS(args...) ARRAY_N(EXTRUDERS, args)
  281. #define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1)
  282. /**
  283. * ARRAY_BY_HOTENDS based on HOTENDS
  284. */
  285. #define ARRAY_BY_HOTENDS(args...) ARRAY_N(HOTENDS, args)
  286. #define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
  287. /**
  288. * Z_DUAL_ENDSTOPS endstop reassignment
  289. */
  290. #if ENABLED(Z_DUAL_ENDSTOPS)
  291. #define _XMIN_ 100
  292. #define _YMIN_ 200
  293. #define _ZMIN_ 300
  294. #define _XMAX_ 101
  295. #define _YMAX_ 201
  296. #define _ZMAX_ 301
  297. #if Z2_USE_ENDSTOP == _XMAX_
  298. #define USE_XMAX_PLUG
  299. #elif Z2_USE_ENDSTOP == _YMAX_
  300. #define USE_YMAX_PLUG
  301. #elif Z2_USE_ENDSTOP == _ZMAX_
  302. #define USE_ZMAX_PLUG
  303. #elif Z2_USE_ENDSTOP == _XMIN_
  304. #define USE_XMIN_PLUG
  305. #elif Z2_USE_ENDSTOP == _YMIN_
  306. #define USE_YMIN_PLUG
  307. #elif Z2_USE_ENDSTOP == _ZMIN_
  308. #define USE_ZMIN_PLUG
  309. #endif
  310. #if Z_HOME_DIR > 0
  311. #if Z2_USE_ENDSTOP == _XMAX_
  312. #define Z2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
  313. #define Z2_MAX_PIN X_MAX_PIN
  314. #elif Z2_USE_ENDSTOP == _YMAX_
  315. #define Z2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
  316. #define Z2_MAX_PIN Y_MAX_PIN
  317. #elif Z2_USE_ENDSTOP == _ZMAX_
  318. #define Z2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
  319. #define Z2_MAX_PIN Z_MAX_PIN
  320. #elif Z2_USE_ENDSTOP == _XMIN_
  321. #define Z2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
  322. #define Z2_MAX_PIN X_MIN_PIN
  323. #elif Z2_USE_ENDSTOP == _YMIN_
  324. #define Z2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
  325. #define Z2_MAX_PIN Y_MIN_PIN
  326. #elif Z2_USE_ENDSTOP == _ZMIN_
  327. #define Z2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
  328. #define Z2_MAX_PIN Z_MIN_PIN
  329. #else
  330. #define Z2_MAX_ENDSTOP_INVERTING false
  331. #endif
  332. #else
  333. #if Z2_USE_ENDSTOP == _XMAX_
  334. #define Z2_MIN_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
  335. #define Z2_MIN_PIN X_MAX_PIN
  336. #elif Z2_USE_ENDSTOP == _YMAX_
  337. #define Z2_MIN_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
  338. #define Z2_MIN_PIN Y_MAX_PIN
  339. #elif Z2_USE_ENDSTOP == _ZMAX_
  340. #define Z2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
  341. #define Z2_MIN_PIN Z_MAX_PIN
  342. #elif Z2_USE_ENDSTOP == _XMIN_
  343. #define Z2_MIN_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
  344. #define Z2_MIN_PIN X_MIN_PIN
  345. #elif Z2_USE_ENDSTOP == _YMIN_
  346. #define Z2_MIN_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
  347. #define Z2_MIN_PIN Y_MIN_PIN
  348. #elif Z2_USE_ENDSTOP == _ZMIN_
  349. #define Z2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
  350. #define Z2_MIN_PIN Z_MIN_PIN
  351. #else
  352. #define Z2_MIN_ENDSTOP_INVERTING false
  353. #endif
  354. #endif
  355. #endif
  356. /**
  357. * Set ENDSTOPPULLUPS for active endstop switches
  358. */
  359. #if ENABLED(ENDSTOPPULLUPS)
  360. #if ENABLED(USE_XMAX_PLUG)
  361. #define ENDSTOPPULLUP_XMAX
  362. #endif
  363. #if ENABLED(USE_YMAX_PLUG)
  364. #define ENDSTOPPULLUP_YMAX
  365. #endif
  366. #if ENABLED(USE_ZMAX_PLUG)
  367. #define ENDSTOPPULLUP_ZMAX
  368. #endif
  369. #if ENABLED(USE_XMIN_PLUG)
  370. #define ENDSTOPPULLUP_XMIN
  371. #endif
  372. #if ENABLED(USE_YMIN_PLUG)
  373. #define ENDSTOPPULLUP_YMIN
  374. #endif
  375. #if ENABLED(USE_ZMIN_PLUG)
  376. #define ENDSTOPPULLUP_ZMIN
  377. #endif
  378. #endif
  379. /**
  380. * Shorthand for pin tests, used wherever needed
  381. */
  382. #define HAS_TEMP_0 (PIN_EXISTS(TEMP_0) && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 > -2)
  383. #define HAS_TEMP_1 (PIN_EXISTS(TEMP_1) && TEMP_SENSOR_1 != 0 && TEMP_SENSOR_1 > -2)
  384. #define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0 && TEMP_SENSOR_2 > -2)
  385. #define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0 && TEMP_SENSOR_3 > -2)
  386. #define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0 && TEMP_SENSOR_BED > -2)
  387. #define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
  388. #define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
  389. #define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
  390. #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
  391. #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
  392. #define HAS_AUTO_FAN_0 (PIN_EXISTS(EXTRUDER_0_AUTO_FAN))
  393. #define HAS_AUTO_FAN_1 (PIN_EXISTS(EXTRUDER_1_AUTO_FAN))
  394. #define HAS_AUTO_FAN_2 (PIN_EXISTS(EXTRUDER_2_AUTO_FAN))
  395. #define HAS_AUTO_FAN_3 (PIN_EXISTS(EXTRUDER_3_AUTO_FAN))
  396. #define AUTO_1_IS_0 (EXTRUDER_1_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
  397. #define AUTO_2_IS_0 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
  398. #define AUTO_2_IS_1 (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
  399. #define AUTO_3_IS_0 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
  400. #define AUTO_3_IS_1 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
  401. #define AUTO_3_IS_2 (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_2_AUTO_FAN_PIN)
  402. #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
  403. #define HAS_FAN0 (PIN_EXISTS(FAN))
  404. #define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLERFAN_PIN != FAN1_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN1_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN1_PIN)
  405. #define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLERFAN_PIN != FAN2_PIN && EXTRUDER_0_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_1_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_2_AUTO_FAN_PIN != FAN2_PIN && EXTRUDER_3_AUTO_FAN_PIN != FAN2_PIN)
  406. #define HAS_CONTROLLERFAN (PIN_EXISTS(CONTROLLERFAN))
  407. #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
  408. #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
  409. #define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
  410. #define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
  411. #define HAS_SERVO_3 (PIN_EXISTS(SERVO3))
  412. #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
  413. #define HAS_FIL_RUNOUT (PIN_EXISTS(FIL_RUNOUT))
  414. #define HAS_HOME (PIN_EXISTS(HOME))
  415. #define HAS_KILL (PIN_EXISTS(KILL))
  416. #define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
  417. #define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
  418. #define HAS_X_MIN (PIN_EXISTS(X_MIN))
  419. #define HAS_X_MAX (PIN_EXISTS(X_MAX))
  420. #define HAS_Y_MIN (PIN_EXISTS(Y_MIN))
  421. #define HAS_Y_MAX (PIN_EXISTS(Y_MAX))
  422. #define HAS_Z_MIN (PIN_EXISTS(Z_MIN))
  423. #define HAS_Z_MAX (PIN_EXISTS(Z_MAX))
  424. #define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN))
  425. #define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
  426. #define HAS_Z_MIN_PROBE_PIN (PIN_EXISTS(Z_MIN_PROBE))
  427. #define HAS_SOLENOID_1 (PIN_EXISTS(SOL1))
  428. #define HAS_SOLENOID_2 (PIN_EXISTS(SOL2))
  429. #define HAS_SOLENOID_3 (PIN_EXISTS(SOL3))
  430. #define HAS_MICROSTEPS_X (PIN_EXISTS(X_MS1))
  431. #define HAS_MICROSTEPS_Y (PIN_EXISTS(Y_MS1))
  432. #define HAS_MICROSTEPS_Z (PIN_EXISTS(Z_MS1))
  433. #define HAS_MICROSTEPS_E0 (PIN_EXISTS(E0_MS1))
  434. #define HAS_MICROSTEPS_E1 (PIN_EXISTS(E1_MS1))
  435. #define HAS_MICROSTEPS_E2 (PIN_EXISTS(E2_MS1))
  436. #define HAS_MICROSTEPS (HAS_MICROSTEPS_X || HAS_MICROSTEPS_Y || HAS_MICROSTEPS_Z || HAS_MICROSTEPS_E0 || HAS_MICROSTEPS_E1 || HAS_MICROSTEPS_E2)
  437. #define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
  438. #define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE))
  439. #define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE))
  440. #define HAS_Y_ENABLE (PIN_EXISTS(Y_ENABLE))
  441. #define HAS_Y2_ENABLE (PIN_EXISTS(Y2_ENABLE))
  442. #define HAS_Z_ENABLE (PIN_EXISTS(Z_ENABLE))
  443. #define HAS_Z2_ENABLE (PIN_EXISTS(Z2_ENABLE))
  444. #define HAS_E0_ENABLE (PIN_EXISTS(E0_ENABLE))
  445. #define HAS_E1_ENABLE (PIN_EXISTS(E1_ENABLE))
  446. #define HAS_E2_ENABLE (PIN_EXISTS(E2_ENABLE))
  447. #define HAS_E3_ENABLE (PIN_EXISTS(E3_ENABLE))
  448. #define HAS_E4_ENABLE (PIN_EXISTS(E4_ENABLE))
  449. #define HAS_X_DIR (PIN_EXISTS(X_DIR))
  450. #define HAS_X2_DIR (PIN_EXISTS(X2_DIR))
  451. #define HAS_Y_DIR (PIN_EXISTS(Y_DIR))
  452. #define HAS_Y2_DIR (PIN_EXISTS(Y2_DIR))
  453. #define HAS_Z_DIR (PIN_EXISTS(Z_DIR))
  454. #define HAS_Z2_DIR (PIN_EXISTS(Z2_DIR))
  455. #define HAS_E0_DIR (PIN_EXISTS(E0_DIR))
  456. #define HAS_E1_DIR (PIN_EXISTS(E1_DIR))
  457. #define HAS_E2_DIR (PIN_EXISTS(E2_DIR))
  458. #define HAS_E3_DIR (PIN_EXISTS(E3_DIR))
  459. #define HAS_E4_DIR (PIN_EXISTS(E4_DIR))
  460. #define HAS_X_STEP (PIN_EXISTS(X_STEP))
  461. #define HAS_X2_STEP (PIN_EXISTS(X2_STEP))
  462. #define HAS_Y_STEP (PIN_EXISTS(Y_STEP))
  463. #define HAS_Y2_STEP (PIN_EXISTS(Y2_STEP))
  464. #define HAS_Z_STEP (PIN_EXISTS(Z_STEP))
  465. #define HAS_Z2_STEP (PIN_EXISTS(Z2_STEP))
  466. #define HAS_E0_STEP (PIN_EXISTS(E0_STEP))
  467. #define HAS_E1_STEP (PIN_EXISTS(E1_STEP))
  468. #define HAS_E2_STEP (PIN_EXISTS(E2_STEP))
  469. #define HAS_E3_STEP (PIN_EXISTS(E3_STEP))
  470. #define HAS_E4_STEP (PIN_EXISTS(E4_STEP))
  471. #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
  472. #define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
  473. #define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E))
  474. #define HAS_TEMP_HOTEND (HAS_TEMP_0 || ENABLED(HEATER_0_USES_MAX6675))
  475. #define HAS_THERMALLY_PROTECTED_BED (HAS_TEMP_BED && HAS_HEATER_BED && ENABLED(THERMAL_PROTECTION_BED))
  476. /**
  477. * This setting is also used by M109 when trying to calculate
  478. * a ballpark safe margin to prevent wait-forever situation.
  479. */
  480. #ifndef EXTRUDE_MINTEMP
  481. #define EXTRUDE_MINTEMP 170
  482. #endif
  483. /**
  484. * Helper Macros for heaters and extruder fan
  485. */
  486. #define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v)
  487. #if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
  488. #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v)
  489. #if HOTENDS > 2
  490. #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v)
  491. #if HOTENDS > 3
  492. #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v)
  493. #endif
  494. #endif
  495. #endif
  496. #if ENABLED(HEATERS_PARALLEL)
  497. #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); }
  498. #else
  499. #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
  500. #endif
  501. #if HAS_HEATER_BED
  502. #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v)
  503. #endif
  504. /**
  505. * Up to 3 PWM fans
  506. */
  507. #if HAS_FAN2
  508. #define FAN_COUNT 3
  509. #elif HAS_FAN1
  510. #define FAN_COUNT 2
  511. #elif HAS_FAN0
  512. #define FAN_COUNT 1
  513. #else
  514. #define FAN_COUNT 0
  515. #endif
  516. #if HAS_FAN0
  517. #define WRITE_FAN(v) WRITE(FAN_PIN, v)
  518. #define WRITE_FAN0(v) WRITE_FAN(v)
  519. #endif
  520. #if HAS_FAN1
  521. #define WRITE_FAN1(v) WRITE(FAN1_PIN, v)
  522. #endif
  523. #if HAS_FAN2
  524. #define WRITE_FAN2(v) WRITE(FAN2_PIN, v)
  525. #endif
  526. #define WRITE_FAN_N(n, v) WRITE_FAN##n(v)
  527. /**
  528. * Servos and probes
  529. */
  530. #if HAS_SERVOS
  531. #ifndef Z_ENDSTOP_SERVO_NR
  532. #define Z_ENDSTOP_SERVO_NR -1
  533. #endif
  534. #endif
  535. #define PROBE_PIN_CONFIGURED (HAS_Z_MIN_PROBE_PIN || (HAS_Z_MIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)))
  536. #define HAS_BED_PROBE (PROBE_SELECTED && PROBE_PIN_CONFIGURED)
  537. #if ENABLED(Z_PROBE_ALLEN_KEY)
  538. #define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
  539. #endif
  540. /**
  541. * Bed Probe dependencies
  542. */
  543. #if HAS_BED_PROBE
  544. #if ENABLED(ENDSTOPPULLUPS) && HAS_Z_MIN_PROBE_PIN
  545. #define ENDSTOPPULLUP_ZMIN_PROBE
  546. #endif
  547. #ifndef Z_PROBE_OFFSET_RANGE_MIN
  548. #define Z_PROBE_OFFSET_RANGE_MIN -20
  549. #endif
  550. #ifndef Z_PROBE_OFFSET_RANGE_MAX
  551. #define Z_PROBE_OFFSET_RANGE_MAX 20
  552. #endif
  553. #ifndef XY_PROBE_SPEED
  554. #ifdef HOMING_FEEDRATE_XY
  555. #define XY_PROBE_SPEED HOMING_FEEDRATE_XY
  556. #else
  557. #define XY_PROBE_SPEED 4000
  558. #endif
  559. #endif
  560. #if Z_CLEARANCE_BETWEEN_PROBES > Z_CLEARANCE_DEPLOY_PROBE
  561. #define _Z_CLEARANCE_DEPLOY_PROBE Z_CLEARANCE_BETWEEN_PROBES
  562. #else
  563. #define _Z_CLEARANCE_DEPLOY_PROBE Z_CLEARANCE_DEPLOY_PROBE
  564. #endif
  565. #else
  566. #undef X_PROBE_OFFSET_FROM_EXTRUDER
  567. #undef Y_PROBE_OFFSET_FROM_EXTRUDER
  568. #undef Z_PROBE_OFFSET_FROM_EXTRUDER
  569. #define X_PROBE_OFFSET_FROM_EXTRUDER 0
  570. #define Y_PROBE_OFFSET_FROM_EXTRUDER 0
  571. #define Z_PROBE_OFFSET_FROM_EXTRUDER 0
  572. #endif
  573. /**
  574. * Delta radius/rod trimmers
  575. */
  576. #if ENABLED(DELTA)
  577. #ifndef DELTA_RADIUS_TRIM_TOWER_1
  578. #define DELTA_RADIUS_TRIM_TOWER_1 0.0
  579. #endif
  580. #ifndef DELTA_RADIUS_TRIM_TOWER_2
  581. #define DELTA_RADIUS_TRIM_TOWER_2 0.0
  582. #endif
  583. #ifndef DELTA_RADIUS_TRIM_TOWER_3
  584. #define DELTA_RADIUS_TRIM_TOWER_3 0.0
  585. #endif
  586. #ifndef DELTA_DIAGONAL_ROD_TRIM_TOWER_1
  587. #define DELTA_DIAGONAL_ROD_TRIM_TOWER_1 0.0
  588. #endif
  589. #ifndef DELTA_DIAGONAL_ROD_TRIM_TOWER_2
  590. #define DELTA_DIAGONAL_ROD_TRIM_TOWER_2 0.0
  591. #endif
  592. #ifndef DELTA_DIAGONAL_ROD_TRIM_TOWER_3
  593. #define DELTA_DIAGONAL_ROD_TRIM_TOWER_3 0.0
  594. #endif
  595. #endif
  596. /**
  597. * Set ABL options based on the specific type of leveling
  598. */
  599. #define ABL_PLANAR (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT))
  600. #define ABL_GRID (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR))
  601. #define HAS_ABL (ABL_PLANAR || ABL_GRID)
  602. #define PLANNER_LEVELING (HAS_ABL || ENABLED(MESH_BED_LEVELING))
  603. #define HAS_PROBING_PROCEDURE (HAS_ABL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST))
  604. #if HAS_PROBING_PROCEDURE
  605. #define PROBE_BED_WIDTH abs(RIGHT_PROBE_BED_POSITION - (LEFT_PROBE_BED_POSITION))
  606. #define PROBE_BED_HEIGHT abs(BACK_PROBE_BED_POSITION - (FRONT_PROBE_BED_POSITION))
  607. #endif
  608. /**
  609. * Buzzer/Speaker
  610. */
  611. #if ENABLED(LCD_USE_I2C_BUZZER)
  612. #ifndef LCD_FEEDBACK_FREQUENCY_HZ
  613. #define LCD_FEEDBACK_FREQUENCY_HZ 1000
  614. #endif
  615. #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
  616. #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
  617. #endif
  618. #else
  619. #ifndef LCD_FEEDBACK_FREQUENCY_HZ
  620. #define LCD_FEEDBACK_FREQUENCY_HZ 5000
  621. #endif
  622. #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
  623. #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
  624. #endif
  625. #endif
  626. /**
  627. * Z_HOMING_HEIGHT / Z_CLEARANCE_BETWEEN_PROBES
  628. */
  629. #ifndef Z_HOMING_HEIGHT
  630. #ifndef Z_CLEARANCE_BETWEEN_PROBES
  631. #define Z_HOMING_HEIGHT 0
  632. #else
  633. #define Z_HOMING_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
  634. #endif
  635. #endif
  636. #ifndef Z_CLEARANCE_BETWEEN_PROBES
  637. #define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT
  638. #endif
  639. #if IS_KINEMATIC
  640. // Check for this in the code instead
  641. #define MIN_PROBE_X X_MIN_POS
  642. #define MAX_PROBE_X X_MAX_POS
  643. #define MIN_PROBE_Y Y_MIN_POS
  644. #define MAX_PROBE_Y Y_MAX_POS
  645. #else
  646. // Boundaries for probing based on set limits
  647. #define MIN_PROBE_X (max(X_MIN_POS, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
  648. #define MAX_PROBE_X (min(X_MAX_POS, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER))
  649. #define MIN_PROBE_Y (max(Y_MIN_POS, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
  650. #define MAX_PROBE_Y (min(Y_MAX_POS, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER))
  651. #endif
  652. // Stepper pulse duration, in cycles
  653. #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
  654. #ifndef DELTA_ENDSTOP_ADJ
  655. #define DELTA_ENDSTOP_ADJ { 0 }
  656. #endif
  657. #endif // CONDITIONALS_POST_H