123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #include "env_validate.h"
-
- /**
- * 2017 Victor Perez Marlin for stm32f1 test
- */
-
- #define BOARD_INFO_NAME "Chitu3D"
- #define DEFAULT_MACHINE_NAME "STM32F103RET6"
-
- #define BOARD_NO_NATIVE_USB
-
- // Enable I2C_EEPROM for testing
- //#define I2C_EEPROM
-
- // Ignore temp readings during development.
- //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN PG10
- #define Y_STOP_PIN PA12
- #define Z_STOP_PIN PA14
-
- //
- // Steppers
- //
- #define X_STEP_PIN PE5
- #define X_DIR_PIN PE6
- #define X_ENABLE_PIN PC13
-
- #define Y_STEP_PIN PE2
- #define Y_DIR_PIN PE3
- #define Y_ENABLE_PIN PE4
-
- #define Z_STEP_PIN PB9
- #define Z_DIR_PIN PE0
- #define Z_ENABLE_PIN PE1
-
- #define E0_STEP_PIN PB4
- #define E0_DIR_PIN PB5
- #define E0_ENABLE_PIN PB8
-
- //
- // Misc. Functions
- //
- #define SDSS -1
- #define LED_PIN -1
-
- #ifndef CASE_LIGHT_PIN
- #define CASE_LIGHT_PIN PA8 // 8
- #endif
-
- #define PS_ON_PIN -1
- #define KILL_PIN PD6 // LED strip 24v
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PD12 // HOT-END
- #define HEATER_BED_PIN PG11 // HOT-BED
-
- #ifndef FAN_PIN
- #define FAN_PIN PG14 // MAIN BOARD FAN
- #endif
-
- #define FAN_SOFT_PWM_REQUIRED
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PA1 // Analog Input
- #define TEMP_BED_PIN PA0 // Analog Input
-
- //
- // LCD Pins
- //
- #if HAS_WIRED_LCD
-
- #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select
- #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI)
- #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock
- #elif BOTH(IS_NEWPANEL, PANEL_ONE)
- #define LCD_PINS_RS PB8
- #define LCD_PINS_ENABLE PD2
- #define LCD_PINS_D4 PB12
- #define LCD_PINS_D5 PB13
- #define LCD_PINS_D6 PB14
- #define LCD_PINS_D7 PB15
- #else
- #define LCD_PINS_RS PB8
- #define LCD_PINS_ENABLE PD2
- #define LCD_PINS_D4 PB12
- #define LCD_PINS_D5 PB13
- #define LCD_PINS_D6 PB14
- #define LCD_PINS_D7 PB15
- #if !IS_NEWPANEL
- #define BEEPER_PIN PC1 // 33
- // Buttons attached to a shift register
- // Not wired yet
- //#define SHIFT_CLK_PIN PC6 // 38
- //#define SHIFT_LD_PIN PC10 // 42
- //#define SHIFT_OUT_PIN PC8 // 40
- //#define SHIFT_EN_PIN PA1 // 17
- #endif
- #endif
-
- #if IS_NEWPANEL
-
- #if IS_RRD_SC
-
- #define BEEPER_PIN PC5
-
- #define BTN_EN1 PB15 // 31
- #define BTN_EN2 PC1 // 33
- #define BTN_ENC PC3 // 35
-
- #define SD_DETECT_PIN PD1 // 49
- #define KILL_PIN PC9 // 41
-
- #if ENABLED(BQ_LCD_SMART_CONTROLLER)
- #define LCD_BACKLIGHT_PIN PC7 // 39
- #endif
-
- #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-
- #define BTN_EN1 PE0 // 64
- #define BTN_EN2 PD11 // 59
- #define BTN_ENC PD15 // 63
- #define SD_DETECT_PIN PC10 // 42
-
- #elif ENABLED(LCD_I2C_PANELOLU2)
-
- #define BTN_EN1 PC15 // 47
- #define BTN_EN2 PC11 // 43
- #define BTN_ENC PC0 // 32
- #define LCD_SDSS PD5 // 53
- #define SD_DETECT_PIN -1
- #define KILL_PIN PC9 // 41
-
- #elif ENABLED(LCD_I2C_VIKI)
-
- #define BTN_EN1 PB6 // 22 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
- #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
-
- #define BTN_ENC -1
- #define LCD_SDSS PD5 // 53
- #define SD_DETECT_PIN PD1 // 49
-
- #elif EITHER(VIKI2, miniVIKI)
-
- #define BEEPER_PIN PC1 // 33
-
- // Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 PC12 // 44
- #define DOGLCD_CS PC13 // 45
-
- #define BTN_EN1 PB6 // 22
- #define BTN_EN2 PA7 // 7
- #define BTN_ENC PC7 // 39
-
- #define SDSS PD5 // 53
- #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
-
- #define KILL_PIN PB15 // 31
-
- #define STAT_LED_RED_PIN PC0 // 32
- #define STAT_LED_BLUE_PIN PC3 // 35
-
- #define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
-
- #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
- #define BTN_EN1 PC3 // 35
- #define BTN_EN2 PC5 // 37
- #define BTN_ENC PB15 // 31
- #define SD_DETECT_PIN PD1 // 49
- #define LCD_SDSS PD5 // 53
- #define KILL_PIN PC9 // 41
- #define BEEPER_PIN PB7 // 23
- #define DOGLCD_CS PB13 // 29
- #define DOGLCD_A0 PB11 // 27
- #define LCD_BACKLIGHT_PIN PC1 // 33
-
- #elif ENABLED(MINIPANEL)
-
- #define BEEPER_PIN PC10 // 42
- // Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 PC12 // 44
- #define DOGLCD_CS PE2 // 66
- #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65
- #define SDSS PD5 // 53
-
- #define KILL_PIN PE0 // 64
-
- // The encoder and click button
- #define BTN_EN1 PC8 // 40
- #define BTN_EN2 PD15 // 63
- #define BTN_ENC PD11 // 59
- // not connected to a pin
- #define SD_DETECT_PIN PD1 // 49
-
- //#define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
-
- #else
-
- // Beeper on AUX-4
- #define BEEPER_PIN PC1 // 33
-
- // Buttons directly attached to AUX-2
- #if IS_RRW_KEYPAD
- #define BTN_EN1 PE0 // 64
- #define BTN_EN2 PD11 // 59
- #define BTN_ENC PD15 // 63
- #define SHIFT_OUT_PIN PC8 // 40
- #define SHIFT_CLK_PIN PC12 // 44
- #define SHIFT_LD_PIN PC10 // 42
- #elif ENABLED(PANEL_ONE)
- #define BTN_EN1 PD11 // 59 // AUX2 PIN 3
- #define BTN_EN2 PD15 // 63 // AUX2 PIN 4
- #define BTN_ENC PD1 // 49 // AUX3 PIN 7
- #else
- #define BTN_EN1 PC5 // 37
- #define BTN_EN2 PC3 // 35
- #define BTN_ENC PB15 // 31
- #endif
-
- #if ENABLED(G3D_PANEL)
- #define SD_DETECT_PIN PD1 // 49
- #define KILL_PIN PC9 // 41
- #else
- //#define SD_DETECT_PIN -1 // Ramps doesn't use this
- #endif
-
- #endif
- #endif // IS_NEWPANEL
-
- #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
- #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
- #endif
-
- #endif // HAS_WIRED_LCD
|