123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Arduino Mega with RAMPS v1.4 for Anycubic
- */
-
- #define BOARD_INFO_NAME "Anycubic RAMPS 1.4"
-
- //
- // Servos
- //
- #if MB(TRIGORILLA_14_11)
- #define SERVO0_PIN 5
- #define SERVO1_PIN 4
- #define SERVO2_PIN 11
- #define SERVO3_PIN 6
- #endif
-
- //
- // PWM FETS
- //
- #if EITHER(FET_ORDER_EEF, FET_ORDER_EEB)
- #define MOSFET_B_PIN 45 // HEATER1
- #elif FET_ORDER_EFB
- #define MOSFET_B_PIN 9 // FAN0
- #else
- #define MOSFET_B_PIN 7 // FAN1
- #endif
-
- #if FET_ORDER_EEB
- #define MOSFET_C_PIN 8 // BED
- #elif FET_ORDER_EFB
- #if DISABLED(ANYCUBIC_LCD_CHIRON)
- #define MOSFET_C_PIN 8
- #else
- #define MOSFET_C_PIN 45
- #endif
- #else // EEF, EFF
- #define MOSFET_C_PIN 9
- #endif
-
- #if FET_ORDER_EEB
- #define FAN_PIN 9 // Override pin 4 in pins_RAMPS.h
- #endif
-
- //
- // Heaters / Fans
- //
- #if ANY(FET_ORDER_EEF, FET_ORDER_EEB, FET_ORDER_EFB)
- #define FAN1_PIN 7
- #endif
- #define FAN2_PIN 44
- #ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN 44 // Used in Anycubic Kossel example config
- #endif
- #if ENABLED(ANYCUBIC_LCD_I3MEGA)
- #define CONTROLLER_FAN_PIN 7
- #endif
-
- //
- // AnyCubic standard pin mappings
- //
- // On most printers, endstops are NOT all wired to the appropriate pins on the Trigorilla board.
- // For instance, on a Chiron, Y axis goes to an aux connector.
- // There are also other things that have been wired in creative ways.
- // To enable PIN definitions for a specific printer model, #define the appropriate symbol after
- // MOTHERBOARD in Configuration.h
-
- //
- // Limit Switches
- //
- //#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
-
- #if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
- #define X_MAX_PIN 43
- #define Y_STOP_PIN 19
- #elif EITHER(ANYCUBIC_LCD_CHIRON, ANYCUBIC_LCD_I3MEGA)
- #define Y_STOP_PIN 42
- #define Z2_MIN_PIN 43
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 2
- #endif
- #ifndef FIL_RUNOUT_PIN
- #if ENABLED(ANYCUBIC_LCD_CHIRON)
- #define FIL_RUNOUT_PIN 33
- #else
- #define FIL_RUNOUT_PIN 19
- #endif
- #endif
- #define BEEPER_PIN 31
- #define SD_DETECT_PIN 49
- #endif
-
- #include "pins_RAMPS.h"
-
- //
- // AnyCubic made the following changes to 1.1.0-RC8
- // If these are appropriate for your LCD let us know.
- //
- #if 0 && HAS_WIRED_LCD
-
- // LCD Display output pins
- #if BOTH(IS_NEWPANEL, PANEL_ONE)
- #undef LCD_PINS_D6
- #define LCD_PINS_D6 57
- #endif
-
- // LCD Display input pins
- #if IS_NEWPANEL
- #if EITHER(VIKI2, miniVIKI)
- #undef DOGLCD_A0
- #define DOGLCD_A0 23
- #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
- #undef BEEPER_PIN
- #define BEEPER_PIN 33
- #undef LCD_BACKLIGHT_PIN
- #define LCD_BACKLIGHT_PIN 67
- #endif
- #elif ENABLED(MINIPANEL)
- #undef BEEPER_PIN
- #define BEEPER_PIN 33
- #undef DOGLCD_A0
- #define DOGLCD_A0 42
- #endif
-
- #endif // HAS_WIRED_LCD
|