My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

pins_ULTIMAIN_2.h 2.6KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Ultiboard v2.0 pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define DEFAULT_MACHINE_NAME "Ultimaker"
  29. #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
  30. #define BOARD_NAME "Ultimaker 2.x"
  31. #define X_STEP_PIN 25
  32. #define X_DIR_PIN 23
  33. #define X_STOP_PIN 22
  34. #define X_ENABLE_PIN 27
  35. #define Y_STEP_PIN 32
  36. #define Y_DIR_PIN 33
  37. #define Y_STOP_PIN 26
  38. #define Y_ENABLE_PIN 31
  39. #define Z_STEP_PIN 35
  40. #define Z_DIR_PIN 36
  41. #define Z_STOP_PIN 29
  42. #define Z_ENABLE_PIN 34
  43. #define HEATER_BED_PIN 4
  44. #define TEMP_BED_PIN 10
  45. #define HEATER_0_PIN 2
  46. #define TEMP_0_PIN 8
  47. #define HEATER_1_PIN 3
  48. #define TEMP_1_PIN 9
  49. #define E0_STEP_PIN 42
  50. #define E0_DIR_PIN 43
  51. #define E0_ENABLE_PIN 37
  52. #define E1_STEP_PIN 49
  53. #define E1_DIR_PIN 47
  54. #define E1_ENABLE_PIN 48
  55. #define SDSS 53
  56. #define LED_PIN 8
  57. #define FAN_PIN 7
  58. #define SAFETY_TRIGGERED_PIN 28 //PIN to detect the safety circuit has triggered
  59. #define MAIN_VOLTAGE_MEASURE_PIN 14 //Analogue PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
  60. #define MOTOR_CURRENT_PWM_XY_PIN 44
  61. #define MOTOR_CURRENT_PWM_Z_PIN 45
  62. #define MOTOR_CURRENT_PWM_E_PIN 46
  63. //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
  64. #define MOTOR_CURRENT_PWM_RANGE 2000
  65. #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
  66. #define BEEPER_PIN 18
  67. #define LCD_PINS_RS 20
  68. #define LCD_PINS_ENABLE 15
  69. #define LCD_PINS_D4 14
  70. #define LCD_PINS_D5 21
  71. #define LCD_PINS_D6 5
  72. #define LCD_PINS_D7 6
  73. //buttons are directly attached
  74. #define BTN_EN1 40
  75. #define BTN_EN2 41
  76. #define BTN_ENC 19
  77. #define SD_DETECT_PIN 39