My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.

pins_RIGIDBOARD.h 2.9KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * RIGIDBOARD Arduino Mega with RAMPS v1.4 pin assignments
  24. */
  25. #define BOARD_NAME "RigidBoard"
  26. #define RAMPS_D10_PIN 9 // EXTRUDER 1
  27. #define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN
  28. #ifndef Z_MIN_PROBE_PIN
  29. #define Z_MIN_PROBE_PIN 19 // Z-MAX pin J14 End Stops
  30. #endif
  31. #include "pins_RAMPS.h"
  32. #undef TEMP_0_PIN
  33. #undef TEMP_1_PIN
  34. #define TEMP_0_PIN 14 // ANALOG NUMBERING
  35. #define TEMP_1_PIN 13 // ANALOG NUMBERING
  36. // LCD Panel options for the RigidBoard
  37. #if ENABLED(RIGIDBOT_PANEL)
  38. #undef BEEPER_PIN
  39. #define BEEPER_PIN -1
  40. // Direction buttons
  41. #define BTN_UP 37
  42. #define BTN_DWN 35
  43. #define BTN_LFT 33
  44. #define BTN_RT 32
  45. // 'R' button
  46. #undef BTN_ENC
  47. #define BTN_ENC 31
  48. // Disable encoder
  49. #undef BTN_EN1
  50. #define BTN_EN1 -1
  51. #undef BTN_EN2
  52. #define BTN_EN2 -1
  53. #undef SD_DETECT_PIN
  54. #define SD_DETECT_PIN 22
  55. #elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
  56. #undef BEEPER_PIN
  57. #define BEEPER_PIN -1
  58. #undef SD_DETECT_PIN
  59. #define SD_DETECT_PIN 22
  60. #undef KILL_PIN
  61. #define KILL_PIN 32
  62. #endif
  63. // SPI for Max6675 or Max31855 Thermocouple
  64. #undef MAX6675_SS
  65. #if ENABLED(SDSUPPORT)
  66. #define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
  67. #else
  68. #define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
  69. #endif
  70. // RigidBot swaps E0 / E1 plugs vs RAMPS 1.3
  71. #undef E0_STEP_PIN
  72. #undef E0_DIR_PIN
  73. #undef E0_ENABLE_PIN
  74. #define E0_STEP_PIN 36
  75. #define E0_DIR_PIN 34
  76. #define E0_ENABLE_PIN 30
  77. #undef E1_STEP_PIN
  78. #undef E1_DIR_PIN
  79. #undef E1_ENABLE_PIN
  80. #define E1_STEP_PIN 26
  81. #define E1_DIR_PIN 28
  82. #define E1_ENABLE_PIN 24
  83. #undef FAN_PIN
  84. #define FAN_PIN 8 // Same as RAMPS_13_EEF
  85. #undef PS_ON_PIN
  86. #define PS_ON_PIN -1
  87. #undef HEATER_BED_PIN
  88. #define HEATER_BED_PIN 10
  89. #undef TEMP_BED_PIN
  90. #define TEMP_BED_PIN 15 // ANALOG NUMBERING
  91. #define STEPPER_RESET_PIN 41 // Stepper drivers have a reset on RigidBot