My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Sethi 3D_1 pin assignments - www.sethi3d.com.br
  24. */
  25. #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
  26. #error "Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Sethi 3D_1"
  29. #ifndef GEN7_VERSION
  30. #define GEN7_VERSION 12 // v1.x
  31. #endif
  32. //
  33. // Limit Switches
  34. //
  35. #define X_STOP_PIN 2
  36. #define Y_STOP_PIN 0
  37. #define Z_MIN_PIN 1
  38. #define Z_MAX_PIN 0
  39. //
  40. // Steppers
  41. //
  42. #define X_STEP_PIN 19
  43. #define X_DIR_PIN 18
  44. #define X_ENABLE_PIN 24
  45. #define Y_STEP_PIN 23
  46. #define Y_DIR_PIN 22
  47. #define Y_ENABLE_PIN 24
  48. #define Z_STEP_PIN 26
  49. #define Z_DIR_PIN 25
  50. #define Z_ENABLE_PIN 24
  51. #define E0_STEP_PIN 28
  52. #define E0_DIR_PIN 27
  53. #define E0_ENABLE_PIN 24
  54. //
  55. // Temperature Sensors
  56. //
  57. #define TEMP_0_PIN 1
  58. #define TEMP_BED_PIN 2
  59. //
  60. // Heaters / Fans
  61. //
  62. #define HEATER_0_PIN 4
  63. #define HEATER_BED_PIN 3
  64. #if (GEN7_VERSION >= 13)
  65. // Gen7 v1.3 removed the fan pin
  66. #define FAN_PIN -1
  67. #else
  68. #define FAN_PIN 31
  69. #endif
  70. #define PS_ON_PIN 15
  71. //All these generations of Gen7 supply thermistor power
  72. //via PS_ON, so ignore bad thermistor readings
  73. #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
  74. //our pin for debugging.
  75. #define DEBUG_PIN 0
  76. //our RS485 pins
  77. #define TX_ENABLE_PIN 12
  78. #define RX_ENABLE_PIN 13