My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

pins_5DPRINT.h 2.4KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * 5DPrint D8 Driver board pin assignments
  24. *
  25. * https://bitbucket.org/makible/5dprint-d8-controller-board
  26. */
  27. #ifndef __AVR_AT90USB1286__
  28. #error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
  29. #endif
  30. #define DEFAULT_MACHINE_NAME "Makibox"
  31. #define BOARD_NAME "5DPrint D8"
  32. #define LARGE_FLASH true
  33. //
  34. // Limit Switches
  35. //
  36. #define X_STOP_PIN 37
  37. #define Y_STOP_PIN 36
  38. #define Z_STOP_PIN 39
  39. //
  40. // Steppers
  41. //
  42. #define X_STEP_PIN 0
  43. #define X_DIR_PIN 1
  44. #define X_ENABLE_PIN 23
  45. #define Y_STEP_PIN 2
  46. #define Y_DIR_PIN 3
  47. #define Y_ENABLE_PIN 19
  48. #define Z_STEP_PIN 4
  49. #define Z_DIR_PIN 5
  50. #define Z_ENABLE_PIN 18
  51. #define E0_STEP_PIN 6
  52. #define E0_DIR_PIN 7
  53. #define E0_ENABLE_PIN 17
  54. // Microstepping pins - Mapping not from fastio.h (?)
  55. #define X_MS1_PIN 25
  56. #define X_MS2_PIN 26
  57. #define Y_MS1_PIN 9
  58. #define Y_MS2_PIN 8
  59. #define Z_MS1_PIN 7
  60. #define Z_MS2_PIN 6
  61. #define E0_MS1_PIN 5
  62. #define E0_MS2_PIN 4
  63. //
  64. // Temperature Sensors
  65. //
  66. #define TEMP_0_PIN 1 // Analog
  67. #define TEMP_BED_PIN 0 // Analog
  68. //
  69. // Heaters / Fans
  70. //
  71. #define HEATER_0_PIN 21
  72. #define HEATER_BED_PIN 20
  73. // You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
  74. // for the fan and Teensyduino uses a different pin mapping.
  75. #define FAN_PIN 16
  76. //
  77. // SD Card
  78. //
  79. #define SDSS 20