My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.

pins_AZTEEG_X3_PRO.h 3.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * AZTEEG_X3_PRO (Arduino Mega) pin assignments
  24. */
  25. #define BOARD_NAME "Azteeg X3 Pro"
  26. #include "pins_RAMPS.h"
  27. //
  28. // Tested this pin with bed leveling on a Delta with 1 servo.
  29. // Physical wire attachment on EXT1: GND, 5V, D47.
  30. //
  31. #undef SERVO0_PIN
  32. #define SERVO0_PIN 47
  33. //
  34. // Swap the MIN and MAX endstop pins because the X3 Pro comes with only
  35. // MIN endstop pin headers soldered onto the board.
  36. //
  37. #if ENABLED(DELTA)
  38. #undef X_MIN_PIN
  39. #undef X_MAX_PIN
  40. #undef Y_MIN_PIN
  41. #undef Y_MAX_PIN
  42. #undef Z_MIN_PIN
  43. #undef Z_MAX_PIN
  44. #define X_MIN_PIN 2
  45. #define X_MAX_PIN 3
  46. #define Y_MIN_PIN 15
  47. #define Y_MAX_PIN 14
  48. #define Z_MIN_PIN 19
  49. #define Z_MAX_PIN 18
  50. #endif
  51. //
  52. // Z Probe (when not Z_MIN_PIN)
  53. //
  54. #ifndef Z_MIN_PROBE_PIN
  55. #define Z_MIN_PROBE_PIN 18
  56. #endif
  57. //
  58. // Steppers
  59. //
  60. #define E2_STEP_PIN 23
  61. #define E2_DIR_PIN 25
  62. #define E2_ENABLE_PIN 40
  63. #define E3_STEP_PIN 27
  64. #define E3_DIR_PIN 29
  65. #define E3_ENABLE_PIN 41
  66. #define E4_STEP_PIN 43
  67. #define E4_DIR_PIN 37
  68. #define E4_ENABLE_PIN 42
  69. //
  70. // Temperature Sensors
  71. //
  72. #define TEMP_2_PIN 12 // ANALOG NUMBERING
  73. #define TEMP_3_PIN 11 // ANALOG NUMBERING
  74. #define TEMP_4_PIN 10 // ANALOG NUMBERING
  75. #define TC1 4 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
  76. #define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
  77. //
  78. // Heaters / Fans
  79. //
  80. #define HEATER_2_PIN 16
  81. #define HEATER_3_PIN 17
  82. #define HEATER_4_PIN 4
  83. #define HEATER_5_PIN 5
  84. #define HEATER_6_PIN 6
  85. #define HEATER_7_PIN 11
  86. #undef FAN_PIN
  87. #define FAN_PIN 6 //Part Cooling System
  88. #define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable)
  89. // Fans/Water Pump to cool the hotend cool side.
  90. #define EXTRUDER_0_AUTO_FAN_PIN 5
  91. #define EXTRUDER_1_AUTO_FAN_PIN 5
  92. #define EXTRUDER_2_AUTO_FAN_PIN 5
  93. #define EXTRUDER_3_AUTO_FAN_PIN 5
  94. //
  95. // LCD / Controller
  96. //
  97. #undef BEEPER_PIN
  98. #define BEEPER_PIN 33
  99. #if ENABLED(VIKI2) || ENABLED(miniVIKI)
  100. #undef SD_DETECT_PIN
  101. #define SD_DETECT_PIN 49 // For easy adapter board
  102. #else
  103. #define STAT_LED_RED 32
  104. #define STAT_LED_BLUE 35
  105. #endif