My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

pins_SANGUINOLOLU_11.h 5.2KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Sanguinololu board pin assignments
  24. */
  25. #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
  26. #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #ifndef BOARD_NAME
  29. #define BOARD_NAME "Sanguinololu <1.2"
  30. #endif
  31. #define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D))
  32. //
  33. // Limit Switches
  34. //
  35. #define X_STOP_PIN 18
  36. #define Y_STOP_PIN 19
  37. #define Z_STOP_PIN 20
  38. //
  39. // Steppers
  40. //
  41. #define X_STEP_PIN 15
  42. #define X_DIR_PIN 21
  43. #define Y_STEP_PIN 22
  44. #define Y_DIR_PIN 23
  45. #define Z_STEP_PIN 3
  46. #define Z_DIR_PIN 2
  47. #define E0_STEP_PIN 1
  48. #define E0_DIR_PIN 0
  49. //
  50. // Temperature Sensors
  51. //
  52. #define TEMP_0_PIN 7 // Analog Input (pin 33 extruder)
  53. #define TEMP_BED_PIN 6 // Analog Input (pin 34 bed)
  54. //
  55. // Heaters / Fans
  56. //
  57. #define HEATER_0_PIN 13 // (extruder)
  58. #if ENABLED(SANGUINOLOLU_V_1_2)
  59. #define HEATER_BED_PIN 12 // (bed)
  60. #define X_ENABLE_PIN 14
  61. #define Y_ENABLE_PIN 14
  62. #define Z_ENABLE_PIN 26
  63. #define E0_ENABLE_PIN 14
  64. #if ENABLED(LCD_I2C_PANELOLU2)
  65. #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
  66. #endif
  67. #else
  68. #define HEATER_BED_PIN 14 // (bed)
  69. #define X_ENABLE_PIN -1
  70. #define Y_ENABLE_PIN -1
  71. #define Z_ENABLE_PIN -1
  72. #define E0_ENABLE_PIN -1
  73. #endif
  74. #if MB(AZTEEG_X1) || MB(STB_11) || IS_MELZI
  75. #define FAN_PIN 4 // Works for Panelolu2 too
  76. #endif
  77. //
  78. // Misc. Functions
  79. //
  80. /**
  81. * On some broken versions of the Sanguino libraries the pin definitions are wrong,
  82. * which then needs SDSS as pin 24. But you should upgrade your Sanguino libraries! See #368.
  83. */
  84. //#define SDSS 24
  85. #define SDSS 31
  86. #if IS_MELZI
  87. #define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
  88. #elif MB(STB_11)
  89. #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
  90. #endif
  91. //
  92. // LCD / Controller
  93. //
  94. #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
  95. #if ENABLED(DOGLCD)
  96. #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
  97. #if IS_MELZI // Melzi board
  98. #define LCD_PINS_RS 30 // CS chip select /SS chip slave select
  99. #define LCD_PINS_ENABLE 29 // SID (MOSI)
  100. #define LCD_PINS_D4 17 // SCK (CLK) clock
  101. // Pin 27 is taken by LED_PIN, but Melzi LED does nothing with
  102. // Marlin so this can be used for BEEPER_PIN. You can use this pin
  103. // with M42 instead of BEEPER_PIN.
  104. #define BEEPER_PIN 27
  105. #else // Sanguinololu 1.3
  106. #define LCD_PINS_RS 4
  107. #define LCD_PINS_ENABLE 17
  108. #define LCD_PINS_D4 30
  109. #define LCD_PINS_D5 29
  110. #define LCD_PINS_D6 28
  111. #define LCD_PINS_D7 27
  112. #endif
  113. #else // DOGM SPI LCD Support
  114. #define DOGLCD_A0 30
  115. #define LCD_CONTRAST 1
  116. #if ENABLED(MAKRPANEL)
  117. #define BEEPER_PIN 29
  118. #define DOGLCD_CS 17
  119. #define LCD_BACKLIGHT_PIN 28 // PA3
  120. #else // !MAKRPANEL
  121. #define DOGLCD_CS 29
  122. #endif
  123. #endif
  124. // Uncomment screen orientation
  125. #define LCD_SCREEN_ROT_0
  126. //#define LCD_SCREEN_ROT_90
  127. //#define LCD_SCREEN_ROT_180
  128. //#define LCD_SCREEN_ROT_270
  129. #else // !DOGLCD
  130. #define LCD_PINS_RS 4
  131. #define LCD_PINS_ENABLE 17
  132. #define LCD_PINS_D4 30
  133. #define LCD_PINS_D5 29
  134. #define LCD_PINS_D6 28
  135. #define LCD_PINS_D7 27
  136. #endif // !DOGLCD
  137. #define BTN_EN1 11
  138. #define BTN_EN2 10
  139. #if ENABLED(LCD_I2C_PANELOLU2)
  140. #if IS_MELZI
  141. #define BTN_ENC 29
  142. #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
  143. #else
  144. #define BTN_ENC 30
  145. #endif
  146. #elif ENABLED(OLED_PANEL_TINYBOY2)
  147. #define BTN_ENC 28
  148. #define LCD_SDSS -1
  149. #else // !Panelolu2, !TinyBoy2
  150. #define BTN_ENC 16
  151. #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
  152. #endif // !Panelolu2, !TinyBoy2
  153. #define SD_DETECT_PIN -1
  154. #endif // ULTRA_LCD && NEWPANEL