My Marlin configs for Fabrikator Mini and CTC i3 Pro B
選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。

SdFatConfig.h 3.7KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * SdFatConfig.h
  24. * Arduino SdFat Library
  25. * Copyright (C) 2009 by William Greiman
  26. *
  27. * This file is part of the Arduino Sd2Card Library
  28. */
  29. #ifndef _SDFATCONFIG_H_
  30. #define _SDFATCONFIG_H_
  31. #include "MarlinConfig.h"
  32. /**
  33. * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero.
  34. *
  35. * Using multiple cards costs 400 - 500 bytes of flash.
  36. *
  37. * Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
  38. */
  39. #define USE_MULTIPLE_CARDS 0
  40. /**
  41. * Call flush for endl if ENDL_CALLS_FLUSH is nonzero
  42. *
  43. * The standard for iostreams is to call flush. This is very costly for
  44. * SdFat. Each call to flush causes 2048 bytes of I/O to the SD.
  45. *
  46. * SdFat has a single 512 byte buffer for SD I/O so it must write the current
  47. * data block to the SD, read the directory block from the SD, update the
  48. * directory entry, write the directory block to the SD and read the data
  49. * block back into the buffer.
  50. *
  51. * The SD flash memory controller is not designed for this many rewrites
  52. * so performance may be reduced by more than a factor of 100.
  53. *
  54. * If ENDL_CALLS_FLUSH is zero, you must call flush and/or close to force
  55. * all data to be written to the SD.
  56. */
  57. #define ENDL_CALLS_FLUSH 0
  58. /**
  59. * Allow use of deprecated functions if ALLOW_DEPRECATED_FUNCTIONS is nonzero
  60. */
  61. #define ALLOW_DEPRECATED_FUNCTIONS 1
  62. /**
  63. * Allow FAT12 volumes if FAT12_SUPPORT is nonzero.
  64. * FAT12 has not been well tested.
  65. */
  66. #define FAT12_SUPPORT 0
  67. /**
  68. * SPI init rate for SD initialization commands. Must be 5 (F_CPU/64)
  69. * or 6 (F_CPU/128).
  70. */
  71. #define SPI_SD_INIT_RATE 5
  72. /**
  73. * Set the SS pin high for hardware SPI. If SS is chip select for another SPI
  74. * device this will disable that device during the SD init phase.
  75. */
  76. #define SET_SPI_SS_HIGH 1
  77. /**
  78. * Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos.
  79. * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.
  80. *
  81. * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used
  82. * on Mega Arduinos. Software SPI works well with GPS Shield V1.1
  83. * but many SD cards will fail with GPS Shield V1.0.
  84. */
  85. #define MEGA_SOFT_SPI 0
  86. // Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
  87. #define USE_SOFTWARE_SPI 0
  88. // Define software SPI pins so Mega can use unmodified 168/328 shields
  89. #define SOFT_SPI_CS_PIN 10 // Software SPI chip select pin for the SD
  90. #define SOFT_SPI_MOSI_PIN 11 // Software SPI Master Out Slave In pin
  91. #define SOFT_SPI_MISO_PIN 12 // Software SPI Master In Slave Out pin
  92. #define SOFT_SPI_SCK_PIN 13 // Software SPI Clock pin
  93. /**
  94. * The __cxa_pure_virtual function is an error handler that is invoked when
  95. * a pure virtual function is called.
  96. */
  97. #define USE_CXA_PURE_VIRTUAL 1
  98. /**
  99. * Defines for 8.3 and long (vfat) filenames
  100. */
  101. #define FILENAME_LENGTH 13 // Number of UTF-16 characters per entry
  102. // Total bytes needed to store a single long filename
  103. #define LONG_FILENAME_LENGTH (FILENAME_LENGTH * MAX_VFAT_ENTRIES + 1)
  104. #endif // _SDFATCONFIG_H_