marlin/Marlin/Conditionals_LCD.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Conditionals_LCD.h
 * Conditionals that need to be set before Configuration_adv.h or pins.h
 */

#ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first
#define CONDITIONALS_LCD_H

  #define LCD_HAS_DIRECTIONAL_BUTTONS (BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))

  #if ENABLED(CARTESIO_UI)

    #define DOGLCD
    #define ULTIPANEL
    #define DEFAULT_LCD_CONTRAST 90
    #define LCD_CONTRAST_MIN 60
    #define LCD_CONTRAST_MAX 140

  #elif ENABLED(MAKRPANEL)

    #define U8GLIB_ST7565_64128N

  #elif ENABLED(ANET_KEYPAD_LCD)

    #define REPRAPWORLD_KEYPAD
    #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
    #define ADC_KEYPAD
    #define ADC_KEY_NUM 8
    #define ULTIPANEL

    // this helps to implement ADC_KEYPAD menus
    #define ENCODER_PULSES_PER_STEP 1
    #define ENCODER_STEPS_PER_MENU_ITEM 1
    #define ENCODER_FEEDRATE_DEADZONE 2
    #define REVERSE_MENU_DIRECTION

  #elif ENABLED(ANET_FULL_GRAPHICS_LCD)

    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

  #elif ENABLED(BQ_LCD_SMART_CONTROLLER)

    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

  #elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)

    #define ULTRA_LCD  //general LCD support, also 16x2
    #define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
    #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.

    #if ENABLED(miniVIKI)
      #define LCD_CONTRAST_MIN      75
      #define LCD_CONTRAST_MAX     115
      #define DEFAULT_LCD_CONTRAST  95
      #define U8GLIB_ST7565_64128N
    #elif ENABLED(VIKI2)
      #define LCD_CONTRAST_MIN       0
      #define LCD_CONTRAST_MAX     255
      #define DEFAULT_LCD_CONTRAST 140
      #define U8GLIB_ST7565_64128N
    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
      #define LCD_CONTRAST_MIN      90
      #define LCD_CONTRAST_MAX     130
      #define DEFAULT_LCD_CONTRAST 110
      #define U8GLIB_LM6059_AF
      #define SD_DETECT_INVERTED
    #endif

  #elif ENABLED(OLED_PANEL_TINYBOY2)

    #define U8GLIB_SSD1306
    #define ULTIPANEL
    #define REVERSE_ENCODER_DIRECTION
    #define REVERSE_MENU_DIRECTION

  #elif ENABLED(RA_CONTROL_PANEL)

    #define LCD_I2C_TYPE_PCA8574
    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
    #define ULTIPANEL

  #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)

    #define DOGLCD
    #define U8GLIB_ST7920
    #define ULTIPANEL

  #elif ENABLED(CR10_STOCKDISPLAY)

    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
    #ifndef ST7920_DELAY_1
      #define ST7920_DELAY_1 DELAY_2_NOP
    #endif
    #ifndef ST7920_DELAY_2
      #define ST7920_DELAY_2 DELAY_2_NOP
    #endif
    #ifndef ST7920_DELAY_3
      #define ST7920_DELAY_3 DELAY_2_NOP
    #endif

  #elif ENABLED(MKS_12864OLED)

    #define REPRAP_DISCOUNT_SMART_CONTROLLER
    #define U8GLIB_SH1106

  #elif ENABLED(MKS_MINI_12864)

    #define MINIPANEL

  #endif

  #if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
    #define DOGLCD
    #define ULTIPANEL
    #define DEFAULT_LCD_CONTRAST 17
  #endif

  // Generic support for SSD1306 / SH1106 OLED based LCDs.
  #if ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SH1106)
    #define ULTRA_LCD  //general LCD support, also 16x2
    #define DOGLCD  // Support for I2C LCD 128x64 (Controller SSD1306 / SH1106 graphic Display Family)
  #endif

  #if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)

    #define ULTIMAKERCONTROLLER

  #elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)

    #define REPRAP_DISCOUNT_SMART_CONTROLLER
    #define LCD_WIDTH 16
    #define LCD_HEIGHT 2

  #endif

  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) || ENABLED(SILVER_GATE_GLCD_CONTROLLER)
    #define DOGLCD
    #define U8GLIB_ST7920
    #define REPRAP_DISCOUNT_SMART_CONTROLLER
  #endif

  #if ENABLED(ULTIMAKERCONTROLLER)              \
   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
   || ENABLED(G3D_PANEL)                        \
   || ENABLED(RIGIDBOT_PANEL)
    #define ULTIPANEL
  #endif

  #if ENABLED(REPRAPWORLD_KEYPAD)
    #define NEWPANEL
    #if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP)
      #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
    #endif
  #endif

  /**
   * I2C PANELS
   */

  #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)

    // Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
    // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home

    #define LCD_I2C_TYPE_PCF8575
    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
    #define ULTIPANEL

  #elif ENABLED(LCD_I2C_PANELOLU2)

    // PANELOLU2 LCD with status LEDs, separate encoder and click inputs

    #define LCD_I2C_TYPE_MCP23017
    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
    #define ULTIPANEL

  #elif ENABLED(LCD_I2C_VIKI)

    /**
     * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
     *
     * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
     * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
     * Note: The pause/stop/resume LCD button pin should be connected to the Arduino
     *       BTN_ENC pin (or set BTN_ENC to -1 if not used)
     */
    #define LCD_I2C_TYPE_MCP23017
    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
    #define ULTIPANEL

    #define ENCODER_FEEDRATE_DEADZONE 4

    #define STD_ENCODER_PULSES_PER_STEP 1
    #define STD_ENCODER_STEPS_PER_MENU_ITEM 2

  #elif ENABLED(G3D_PANEL)

    #define STD_ENCODER_PULSES_PER_STEP 2
    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1

  #elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
     || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
     || ENABLED(OLED_PANEL_TINYBOY2) \
     || ENABLED(BQ_LCD_SMART_CONTROLLER) \
     || ENABLED(LCD_I2C_PANELOLU2) \
     || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
    #define STD_ENCODER_PULSES_PER_STEP 4
    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
  #endif

  #ifndef STD_ENCODER_PULSES_PER_STEP
    #define STD_ENCODER_PULSES_PER_STEP 5
  #endif
  #ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
  #endif
  #ifndef ENCODER_PULSES_PER_STEP
    #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
  #endif
  #ifndef ENCODER_STEPS_PER_MENU_ITEM
    #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
  #endif
  #ifndef ENCODER_FEEDRATE_DEADZONE
    #define ENCODER_FEEDRATE_DEADZONE 6
  #endif

  // Shift register panels
  // ---------------------
  // 2 wire Non-latching LCD SR from:
  // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection

  #if ENABLED(SAV_3DLCD)
    #define SR_LCD_2W_NL    // Non latching 2 wire shift register
    #define ULTIPANEL
  #endif

  #if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display
    #ifndef LCD_WIDTH
      #define LCD_WIDTH 22
    #endif
    #ifndef LCD_HEIGHT
      #define LCD_HEIGHT 5
    #endif
  #endif

  #if ENABLED(ULTIPANEL)
    #define NEWPANEL  // Disable this if you actually have no click-encoder panel
    #define ULTRA_LCD
    #ifndef LCD_WIDTH
      #define LCD_WIDTH 20
    #endif
    #ifndef LCD_HEIGHT
      #define LCD_HEIGHT 4
    #endif
  #elif ENABLED(ULTRA_LCD)  // no panel but just LCD
    #ifndef LCD_WIDTH
      #define LCD_WIDTH 16
    #endif
    #ifndef LCD_HEIGHT
      #define LCD_HEIGHT 2
    #endif
  #endif

  #if ENABLED(DOGLCD)
    /* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */
    // \x00 intentionally skipped to avoid problems in strings
    #define LCD_STR_REFRESH     "\x01"
    #define LCD_STR_FOLDER      "\x02"
    #define LCD_STR_ARROW_RIGHT "\x03"
    #define LCD_STR_UPLEVEL     "\x04"
    #define LCD_STR_CLOCK       "\x05"
    #define LCD_STR_FEEDRATE    "\x06"
    #define LCD_STR_BEDTEMP     "\x07"
    #define LCD_STR_THERMOMETER "\x08"
    #define LCD_STR_DEGREE      "\x09"

    #define LCD_STR_SPECIAL_MAX '\x09'
    // Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin.
    // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.

    // Symbol characters
    #define LCD_STR_FILAM_DIA   "\xf8"
    #define LCD_STR_FILAM_MUL   "\xa4"
  #else
    /* Custom characters defined in the first 8 characters of the LCD */
    #define LCD_BEDTEMP_CHAR     0x00  // Print only as a char. This will have 'unexpected' results when used in a string!
    #define LCD_DEGREE_CHAR      0x01
    #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
    #define LCD_UPLEVEL_CHAR     0x03
    #define LCD_STR_REFRESH     "\x04"
    #define LCD_STR_FOLDER      "\x05"
    #define LCD_FEEDRATE_CHAR    0x06
    #define LCD_CLOCK_CHAR       0x07
    #define LCD_STR_ARROW_RIGHT ">"  /* from the default character set */
  #endif

  /**
   * Default LCD contrast for dogm-like LCD displays
   */
  #if ENABLED(DOGLCD)

    #define HAS_LCD_CONTRAST ( \
        ENABLED(MAKRPANEL) \
     || ENABLED(CARTESIO_UI) \
     || ENABLED(VIKI2) \
     || ENABLED(miniVIKI) \
     || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
    )

    #if HAS_LCD_CONTRAST
      #ifndef LCD_CONTRAST_MIN
        #define LCD_CONTRAST_MIN 0
      #endif
      #ifndef LCD_CONTRAST_MAX
        #define LCD_CONTRAST_MAX 63
      #endif
      #ifndef DEFAULT_LCD_CONTRAST
        #define DEFAULT_LCD_CONTRAST 32
      #endif
    #endif
  #endif

  // Boot screens
  #if DISABLED(ULTRA_LCD)
    #undef SHOW_BOOTSCREEN
  #elif !defined(BOOTSCREEN_TIMEOUT)
    #define BOOTSCREEN_TIMEOUT 2500
  #endif

  #define HAS_DEBUG_MENU ENABLED(LCD_PROGRESS_BAR_TEST)

  // MK2 Multiplexer forces SINGLENOZZLE to be enabled
  #if ENABLED(MK2_MULTIPLEXER)
    #define SINGLENOZZLE
  #endif

  /**
   * Extruders have some combination of stepper motors and hotends
   * so we separate these concepts into the defines:
   *
   *  EXTRUDERS    - Number of Selectable Tools
   *  HOTENDS      - Number of hotends, whether connected or separate
   *  E_STEPPERS   - Number of actual E stepper motors
   *  E_MANUAL     - Number of E steppers for LCD move options
   *  TOOL_E_INDEX - Index to use when getting/setting the tool state
   *
   */
  #if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
    #define HOTENDS       1
    #undef TEMP_SENSOR_1_AS_REDUNDANT
    #undef HOTEND_OFFSET_X
    #undef HOTEND_OFFSET_Y
  #else                                                         // Two hotends
    #define HOTENDS       EXTRUDERS
    #if ENABLED(SWITCHING_NOZZLE) && !defined(HOTEND_OFFSET_Z)
      #define HOTEND_OFFSET_Z { 0 }
    #endif
  #endif

  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(MIXING_EXTRUDER)   // Unified E axis
    #if ENABLED(MIXING_EXTRUDER)
      #define E_STEPPERS  MIXING_STEPPERS
    #else
      #define E_STEPPERS  1                                     // One E stepper
    #endif
    #define E_MANUAL      1
    #define TOOL_E_INDEX  0
  #else
    #define E_STEPPERS    EXTRUDERS
    #define E_MANUAL      EXTRUDERS
    #define TOOL_E_INDEX  current_block->active_extruder
  #endif

  /**
   * DISTINCT_E_FACTORS affects how some E factors are accessed
   */
  #if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
    #define XYZE_N (XYZ + E_STEPPERS)
    #define E_AXIS_N (E_AXIS + extruder)
  #else
    #undef DISTINCT_E_FACTORS
    #define XYZE_N XYZE
    #define E_AXIS_N E_AXIS
  #endif

  /**
   * The BLTouch Probe emulates a servo probe
   * and uses "special" angles for its state.
   */
  #if ENABLED(BLTOUCH)
    #ifndef Z_ENDSTOP_SERVO_NR
      #define Z_ENDSTOP_SERVO_NR 0
    #endif
    #ifndef NUM_SERVOS
      #define NUM_SERVOS (Z_ENDSTOP_SERVO_NR + 1)
    #endif
    #undef DEACTIVATE_SERVOS_AFTER_MOVE
    #if NUM_SERVOS == 1
      #undef SERVO_DELAY
      #define SERVO_DELAY { 50 }
    #endif
    #ifndef BLTOUCH_DELAY
      #define BLTOUCH_DELAY 375
    #endif
    #undef Z_SERVO_ANGLES
    #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }

    #define BLTOUCH_DEPLOY    10
    #define BLTOUCH_STOW      90
    #define BLTOUCH_SELFTEST 120
    #define BLTOUCH_RESET    160
    #define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)

    // Always disable probe pin inverting for BLTouch
    #undef Z_MIN_PROBE_ENDSTOP_INVERTING
    #define Z_MIN_PROBE_ENDSTOP_INVERTING false

    #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
      #undef Z_MIN_ENDSTOP_INVERTING
      #define Z_MIN_ENDSTOP_INVERTING false
      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN)
    #else
      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE)
    #endif
  #endif

  /**
   * Set a flag for a servo probe
   */
  #define HAS_Z_SERVO_ENDSTOP (defined(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)

  /**
   * Set a flag for any enabled probe
   */
  #define PROBE_SELECTED (ENABLED(PROBE_MANUALLY) || ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE))

  /**
   * Clear probe pin settings when no probe is selected
   */
  #if !PROBE_SELECTED || ENABLED(PROBE_MANUALLY)
    #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
    #undef Z_MIN_PROBE_ENDSTOP
  #endif

  #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
  #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
  #define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED))

#endif // CONDITIONALS_LCD_H