My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

language_de.h 52KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <https://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * German
  25. *
  26. * LCD Menu Messages
  27. * See also https://marlinfw.org/docs/development/lcd_language.html
  28. */
  29. namespace Language_de {
  30. using namespace Language_en; // Inherit undefined strings from English
  31. constexpr uint8_t CHARSIZE = 2;
  32. LSTR LANGUAGE = _UxGT("Deutsch");
  33. LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" bereit");
  34. LSTR MSG_YES = _UxGT("JA");
  35. LSTR MSG_NO = _UxGT("NEIN");
  36. LSTR MSG_HIGH = _UxGT("HOCH");
  37. LSTR MSG_LOW = _UxGT("RUNTER");
  38. LSTR MSG_BACK = _UxGT("Zurück");
  39. LSTR MSG_ERROR = _UxGT("Fehler");
  40. LSTR MSG_MEDIA_ABORTING = _UxGT("Abbruch...");
  41. LSTR MSG_MEDIA_INSERTED = _UxGT("Medium erkannt");
  42. LSTR MSG_MEDIA_REMOVED = _UxGT("Medium entfernt");
  43. LSTR MSG_MEDIA_WAITING = _UxGT("Warten auf Medium");
  44. LSTR MSG_MEDIA_INIT_FAIL = _UxGT("Medium Init fehlgesch.");
  45. LSTR MSG_MEDIA_READ_ERROR = _UxGT("Medium Lesefehler");
  46. LSTR MSG_MEDIA_USB_REMOVED = _UxGT("USB Gerät entfernt");
  47. LSTR MSG_MEDIA_USB_FAILED = _UxGT("USB Start fehlge.");
  48. LSTR MSG_KILL_SUBCALL_OVERFLOW = _UxGT("Subcall überschritten");
  49. LSTR MSG_LCD_ENDSTOPS = _UxGT("Endstopp"); // Max length 8 characters
  50. LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Software-Endstopp");
  51. LSTR MSG_MAIN = _UxGT("Hauptmenü");
  52. LSTR MSG_ADVANCED_SETTINGS = _UxGT("Erw. Einstellungen");
  53. LSTR MSG_TOOLBAR_SETUP = _UxGT("Toolbar Einstellung");
  54. LSTR MSG_OPTION_DISABLED = _UxGT("Option Deaktiviert");
  55. LSTR MSG_CONFIGURATION = _UxGT("Konfiguration");
  56. LSTR MSG_RUN_AUTO_FILES = _UxGT("Autostart");
  57. LSTR MSG_DISABLE_STEPPERS = _UxGT("Motoren deaktivieren"); // M84 :: Max length 19 characters
  58. LSTR MSG_DEBUG_MENU = _UxGT("Debug-Menü");
  59. LSTR MSG_PROGRESS_BAR_TEST = _UxGT("Statusbalken-Test");
  60. LSTR MSG_HOMING = _UxGT("Homing");
  61. LSTR MSG_AUTO_HOME = _UxGT("Auto Home");
  62. LSTR MSG_AUTO_HOME_A = _UxGT("Home @");
  63. LSTR MSG_AUTO_HOME_X = _UxGT("Home X");
  64. LSTR MSG_AUTO_HOME_Y = _UxGT("Home Y");
  65. LSTR MSG_AUTO_HOME_Z = _UxGT("Home Z");
  66. LSTR MSG_FILAMENT_SET = _UxGT("Fila. Einstellungen");
  67. LSTR MSG_FILAMENT_MAN = _UxGT("Filament Management");
  68. LSTR MSG_MANUAL_LEVELING = _UxGT("Manuell Nivellierung");
  69. LSTR MSG_LEVBED_FL = _UxGT("Vorne Links");
  70. LSTR MSG_LEVBED_FR = _UxGT("Vorne Rechts");
  71. LSTR MSG_LEVBED_C = _UxGT("Mitte");
  72. LSTR MSG_LEVBED_BL = _UxGT("Hinten Links");
  73. LSTR MSG_LEVBED_BR = _UxGT("Hinten Rechts");
  74. LSTR MSG_MANUAL_MESH = _UxGT("manuelles Netz");
  75. LSTR MSG_AUTO_MESH = _UxGT("Netz auto. erstellen");
  76. LSTR MSG_AUTO_Z_ALIGN = _UxGT("Z-Achsen ausgleichen");
  77. LSTR MSG_ITERATION = _UxGT("G34 Iteration: %i");
  78. LSTR MSG_DECREASING_ACCURACY = _UxGT("Genauigkeit sinkt!");
  79. LSTR MSG_ACCURACY_ACHIEVED = _UxGT("Genauigkeit erreicht");
  80. LSTR MSG_LEVEL_BED_HOMING = _UxGT("XYZ homen");
  81. LSTR MSG_LEVEL_BED_WAITING = _UxGT("Klick zum Starten");
  82. LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("Nächste Koordinate");
  83. LSTR MSG_LEVEL_BED_DONE = _UxGT("Nivellieren fertig!");
  84. LSTR MSG_Z_FADE_HEIGHT = _UxGT("Ausblendhöhe");
  85. LSTR MSG_SET_HOME_OFFSETS = _UxGT("Setze Homeversatz");
  86. LSTR MSG_HOME_OFFSET_X = _UxGT("Homeversatz X");
  87. LSTR MSG_HOME_OFFSET_Y = _UxGT("Homeversatz Y");
  88. LSTR MSG_HOME_OFFSET_Z = _UxGT("Homeversatz Z");
  89. LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("Homeversatz aktiv");
  90. LSTR MSG_TRAMMING_WIZARD = _UxGT("Tramming Assistent");
  91. LSTR MSG_SELECT_ORIGIN = _UxGT("Wählen Sie Ursprung");
  92. LSTR MSG_LAST_VALUE_SP = _UxGT("Letzter Wert ");
  93. #if HAS_PREHEAT
  94. LSTR MSG_PREHEAT_1 = PREHEAT_1_LABEL _UxGT(" Vorwärmen");
  95. LSTR MSG_PREHEAT_1_H = PREHEAT_1_LABEL _UxGT(" Vorwärmen ~");
  96. LSTR MSG_PREHEAT_1_END = PREHEAT_1_LABEL _UxGT(" Extr. Vorwärmen");
  97. LSTR MSG_PREHEAT_1_END_E = PREHEAT_1_LABEL _UxGT(" Extr. Vorwärm. ~");
  98. LSTR MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" Alles Vorwärmen");
  99. LSTR MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" Bett Vorwärmen");
  100. LSTR MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" Einstellungen");
  101. #ifdef PREHEAT_2_LABEL
  102. LSTR MSG_PREHEAT_2 = PREHEAT_2_LABEL _UxGT(" Vorwärmen");
  103. LSTR MSG_PREHEAT_2_SETTINGS = PREHEAT_2_LABEL _UxGT(" Vorwärmen Konf");
  104. #endif
  105. #ifdef PREHEAT_3_LABEL
  106. LSTR MSG_PREHEAT_3 = PREHEAT_3_LABEL _UxGT(" Vorwärmen");
  107. LSTR MSG_PREHEAT_3_SETTINGS = PREHEAT_3_LABEL _UxGT(" Vorwärmen Konf");
  108. #endif
  109. LSTR MSG_PREHEAT_M = _UxGT("$ Vorwärmen");
  110. LSTR MSG_PREHEAT_M_H = _UxGT("$ Vorwärmen") " ~";
  111. LSTR MSG_PREHEAT_M_END = _UxGT("$ Extr. Vorwärmen");
  112. LSTR MSG_PREHEAT_M_END_E = _UxGT("$ Extr. Vorwärm. ~");
  113. LSTR MSG_PREHEAT_M_ALL = _UxGT("$ Alles Vorwärmen");
  114. LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("$ Bett Vorwärmen");
  115. LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("$ Einstellungen");
  116. #endif
  117. LSTR MSG_PREHEAT_CUSTOM = _UxGT("benutzerdef. Heizen");
  118. LSTR MSG_COOLDOWN = _UxGT("Abkühlen");
  119. LSTR MSG_CUTTER_FREQUENCY = _UxGT("Frequenz");
  120. LSTR MSG_LASER_MENU = _UxGT("Laser");
  121. LSTR MSG_SPINDLE_MENU = _UxGT("Spindel-Steuerung");
  122. LSTR MSG_LASER_POWER = _UxGT("Laserleistung");
  123. LSTR MSG_SPINDLE_POWER = _UxGT("Spindelleistung");
  124. LSTR MSG_LASER_TOGGLE = _UxGT("Laser umschalten");
  125. LSTR MSG_LASER_EVAC_TOGGLE = _UxGT("Gebläse umschalten");
  126. LSTR MSG_LASER_ASSIST_TOGGLE = _UxGT("Luftunterstützung");
  127. LSTR MSG_LASER_PULSE_MS = _UxGT("Test Impuls ms");
  128. LSTR MSG_LASER_FIRE_PULSE = _UxGT("Fire Impuls");
  129. LSTR MSG_FLOWMETER_FAULT = _UxGT("Feh. Kühlmittelfluss");
  130. LSTR MSG_SPINDLE_TOGGLE = _UxGT("Spindel umschalten");
  131. LSTR MSG_SPINDLE_EVAC_TOGGLE = _UxGT("Vakuum umschalten");
  132. LSTR MSG_SPINDLE_FORWARD = _UxGT("Spindel vorwärts");
  133. LSTR MSG_SPINDLE_REVERSE = _UxGT("Spindelrichtung");
  134. LSTR MSG_SWITCH_PS_ON = _UxGT("Netzteil ein");
  135. LSTR MSG_SWITCH_PS_OFF = _UxGT("Netzteil aus");
  136. LSTR MSG_EXTRUDE = _UxGT("Extrudieren");
  137. LSTR MSG_RETRACT = _UxGT("Einzug");
  138. LSTR MSG_MOVE_AXIS = _UxGT("Achsen bewegen");
  139. LSTR MSG_BED_LEVELING = _UxGT("Bett-Nivellierung");
  140. LSTR MSG_LEVEL_BED = _UxGT("Bett nivellieren");
  141. LSTR MSG_BED_TRAMMING = _UxGT("Bett ausrichten");
  142. LSTR MSG_BED_TRAMMING_MANUAL = _UxGT("Manuelles ausrichten");
  143. LSTR MSG_BED_TRAMMING_RAISE = _UxGT("Das Bett anpassen, bis zum auslösen.");
  144. LSTR MSG_BED_TRAMMING_IN_RANGE = _UxGT("Ecken in der Toleranz. Bett ausger.");
  145. LSTR MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Gute Punkte: ");
  146. LSTR MSG_BED_TRAMMING_LAST_Z = _UxGT("Letztes Z: ");
  147. LSTR MSG_NEXT_CORNER = _UxGT("Nächste Ecke");
  148. LSTR MSG_MESH_EDITOR = _UxGT("Netz Editor");
  149. LSTR MSG_MESH_VIEWER = _UxGT("Netzbetrachter");
  150. LSTR MSG_EDIT_MESH = _UxGT("Netz bearbeiten");
  151. LSTR MSG_MESH_VIEW = _UxGT("Netz ansehen");
  152. LSTR MSG_EDITING_STOPPED = _UxGT("Netzbearb. angeh.");
  153. LSTR MSG_NO_VALID_MESH = _UxGT("Kein gültiges Netz");
  154. LSTR MSG_ACTIVATE_MESH = _UxGT("Nivellierung aktiv.");
  155. LSTR MSG_PROBING_POINT = _UxGT("Messpunkt");
  156. LSTR MSG_MESH_X = _UxGT("Index X");
  157. LSTR MSG_MESH_Y = _UxGT("Index Y");
  158. LSTR MSG_MESH_INSET = _UxGT("Mesh-Einsatz");
  159. LSTR MSG_MESH_MIN_X = _UxGT("Mesh X Minimum");
  160. LSTR MSG_MESH_MAX_X = _UxGT("Mesh X Maximum");
  161. LSTR MSG_MESH_MIN_Y = _UxGT("Mesh Y Minimum");
  162. LSTR MSG_MESH_MAX_Y = _UxGT("Mesh Y Maximum");
  163. LSTR MSG_MESH_AMAX = _UxGT("Bereich maximieren");
  164. LSTR MSG_MESH_CENTER = _UxGT("Center Area");
  165. LSTR MSG_MESH_EDIT_Z = _UxGT("Z-Wert");
  166. LSTR MSG_MESH_CANCEL = _UxGT("Mesh abgebrochen");
  167. LSTR MSG_CUSTOM_COMMANDS = _UxGT("Benutzer-Menü");
  168. LSTR MSG_M48_TEST = _UxGT("M48 Sondentest");
  169. LSTR MSG_M48_POINT = _UxGT("M48 Punkt");
  170. LSTR MSG_M48_OUT_OF_BOUNDS = _UxGT("Zu weit draußen");
  171. LSTR MSG_M48_DEVIATION = _UxGT("Abweichung");
  172. LSTR MSG_IDEX_MENU = _UxGT("IDEX-Modus");
  173. LSTR MSG_OFFSETS_MENU = _UxGT("Werkzeugversätze");
  174. LSTR MSG_IDEX_MODE_AUTOPARK = _UxGT("Autom. parken");
  175. LSTR MSG_IDEX_MODE_DUPLICATE = _UxGT("Duplizieren");
  176. LSTR MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("Spiegelkopie");
  177. LSTR MSG_IDEX_MODE_FULL_CTRL = _UxGT("vollstä. Kontrolle");
  178. LSTR MSG_IDEX_DUPE_GAP = _UxGT("X-Lücke duplizieren");
  179. LSTR MSG_HOTEND_OFFSET_Z = _UxGT("2. Düse Z");
  180. LSTR MSG_HOTEND_OFFSET_A = _UxGT("2. Düse @");
  181. LSTR MSG_UBL_DOING_G29 = _UxGT("G29 ausführen");
  182. LSTR MSG_UBL_TOOLS = _UxGT("UBL-Werkzeuge");
  183. LSTR MSG_UBL_LEVEL_BED = _UxGT("Unified Bed Leveling");
  184. LSTR MSG_LCD_TILTING_MESH = _UxGT("Berührungspunkt");
  185. LSTR MSG_UBL_TILT_MESH = _UxGT("Tilt Mesh");
  186. LSTR MSG_UBL_TILTING_GRID = _UxGT("Tilting Grid Size");
  187. LSTR MSG_UBL_MESH_TILTED = _UxGT("Mesh Tilted");
  188. LSTR MSG_UBL_MANUAL_MESH = _UxGT("Netz manuell erst.");
  189. LSTR MSG_UBL_MESH_WIZARD = _UxGT("UBL Netz Assistent");
  190. LSTR MSG_UBL_BC_INSERT = _UxGT("Unterlegen & messen");
  191. LSTR MSG_UBL_BC_INSERT2 = _UxGT("Messen");
  192. LSTR MSG_UBL_BC_REMOVE = _UxGT("Entfernen & messen");
  193. LSTR MSG_UBL_MOVING_TO_NEXT = _UxGT("Nächster Punkt...");
  194. LSTR MSG_UBL_ACTIVATE_MESH = _UxGT("UBL aktivieren");
  195. LSTR MSG_UBL_DEACTIVATE_MESH = _UxGT("UBL deaktivieren");
  196. LSTR MSG_UBL_SET_TEMP_BED = _UxGT("Betttemperatur");
  197. LSTR MSG_UBL_BED_TEMP_CUSTOM = _UxGT("Betttemperatur");
  198. LSTR MSG_UBL_SET_TEMP_HOTEND = _UxGT("Hotend-Temp.");
  199. LSTR MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("Hotend-Temp.");
  200. LSTR MSG_UBL_MESH_EDIT = _UxGT("Netz bearbeiten");
  201. LSTR MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("Eigenes Netz bearb.");
  202. LSTR MSG_UBL_FINE_TUNE_MESH = _UxGT("Feineinstellung...");
  203. LSTR MSG_UBL_DONE_EDITING_MESH = _UxGT("Bearbeitung beendet");
  204. LSTR MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("Eigenes Netz erst.");
  205. LSTR MSG_UBL_BUILD_MESH_MENU = _UxGT("Netz erstellen");
  206. LSTR MSG_UBL_BUILD_MESH_M = _UxGT("$ Netz erstellen");
  207. LSTR MSG_UBL_BUILD_COLD_MESH = _UxGT("Netz erstellen kalt");
  208. LSTR MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("Netzhöhe einst.");
  209. LSTR MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Höhe");
  210. LSTR MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Netz validieren");
  211. LSTR MSG_UBL_VALIDATE_MESH_M = _UxGT("$ Netz validieren");
  212. LSTR MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Eig. Netz validieren");
  213. LSTR MSG_G26_HEATING_BED = _UxGT("G26 heizt Bett");
  214. LSTR MSG_G26_HEATING_NOZZLE = _UxGT("G26 Düse aufheizen");
  215. LSTR MSG_G26_MANUAL_PRIME = _UxGT("Manuell Prime...");
  216. LSTR MSG_G26_FIXED_LENGTH = _UxGT("Feste Länge Prime");
  217. LSTR MSG_G26_PRIME_DONE = _UxGT("Priming fertig");
  218. LSTR MSG_G26_CANCELED = _UxGT("G26 abgebrochen");
  219. LSTR MSG_G26_LEAVING = _UxGT("G26 verlassen");
  220. LSTR MSG_UBL_CONTINUE_MESH = _UxGT("Netzerst. forts.");
  221. LSTR MSG_UBL_MESH_LEVELING = _UxGT("Netz-Nivellierung");
  222. LSTR MSG_UBL_3POINT_MESH_LEVELING = _UxGT("3-Punkt-Nivell.");
  223. LSTR MSG_UBL_GRID_MESH_LEVELING = _UxGT("Gitternetz-Nivell.");
  224. LSTR MSG_UBL_MESH_LEVEL = _UxGT("Netz nivellieren");
  225. LSTR MSG_UBL_SIDE_POINTS = _UxGT("Eckpunkte");
  226. LSTR MSG_UBL_MAP_TYPE = _UxGT("Kartentyp");
  227. LSTR MSG_UBL_OUTPUT_MAP = _UxGT("Karte ausgeben");
  228. LSTR MSG_UBL_OUTPUT_MAP_HOST = _UxGT("Ausgabe für Host");
  229. LSTR MSG_UBL_OUTPUT_MAP_CSV = _UxGT("Ausgabe für CSV");
  230. LSTR MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("Externe Sicherung");
  231. LSTR MSG_UBL_INFO_UBL = _UxGT("UBL-Info ausgeben");
  232. LSTR MSG_UBL_FILLIN_AMOUNT = _UxGT("Menge an Füllung");
  233. LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("Manuelles Füllen");
  234. LSTR MSG_UBL_SMART_FILLIN = _UxGT("Cleveres Füllen");
  235. LSTR MSG_UBL_FILLIN_MESH = _UxGT("Netz Füllen");
  236. LSTR MSG_UBL_MESH_FILLED = _UxGT("Fehlende Punkte erg.");
  237. LSTR MSG_UBL_MESH_INVALID = _UxGT("Ungültiges Netz");
  238. LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("Alles annullieren");
  239. LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Nächstlieg. ann.");
  240. LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("Feineinst. Alles");
  241. LSTR MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("Feineinst. Nächstl.");
  242. LSTR MSG_UBL_STORAGE_MESH_MENU = _UxGT("Netz-Speicherplatz");
  243. LSTR MSG_UBL_STORAGE_SLOT = _UxGT("Speicherort");
  244. LSTR MSG_UBL_LOAD_MESH = _UxGT("Bettnetz laden");
  245. LSTR MSG_UBL_SAVE_MESH = _UxGT("Bettnetz speichern");
  246. LSTR MSG_UBL_INVALID_SLOT = _UxGT("Wähle einen Mesh-Slot");
  247. LSTR MSG_MESH_LOADED = _UxGT("Netz %i geladen");
  248. LSTR MSG_MESH_SAVED = _UxGT("Netz %i gespeichert");
  249. LSTR MSG_UBL_NO_STORAGE = _UxGT("Kein Speicher");
  250. LSTR MSG_UBL_SAVE_ERROR = _UxGT("Err:UBL speichern");
  251. LSTR MSG_UBL_RESTORE_ERROR = _UxGT("Err:UBL wiederherst.");
  252. LSTR MSG_UBL_Z_OFFSET = _UxGT("Z-Versatz: ");
  253. LSTR MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z-Versatz angehalten");
  254. LSTR MSG_UBL_STEP_BY_STEP_MENU = _UxGT("Schrittweises UBL");
  255. LSTR MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1.Netz kalt erstellen");
  256. LSTR MSG_UBL_2_SMART_FILLIN = _UxGT("2.Intelligent Füllen");
  257. LSTR MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3.Netz validieren");
  258. LSTR MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4.Alles Feineinst.");
  259. LSTR MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5.Netz validieren");
  260. LSTR MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6.Alles Feineinst.");
  261. LSTR MSG_UBL_7_SAVE_MESH = _UxGT("7.Bettnetz speichern");
  262. LSTR MSG_LED_CONTROL = _UxGT("Licht-Steuerung");
  263. LSTR MSG_LEDS = _UxGT("Licht");
  264. LSTR MSG_LED_PRESETS = _UxGT("Licht-Einstellung");
  265. LSTR MSG_SET_LEDS_RED = _UxGT("Rot");
  266. LSTR MSG_SET_LEDS_ORANGE = _UxGT("Orange");
  267. LSTR MSG_SET_LEDS_YELLOW = _UxGT("Gelb");
  268. LSTR MSG_SET_LEDS_GREEN = _UxGT("Grün");
  269. LSTR MSG_SET_LEDS_BLUE = _UxGT("Blau");
  270. LSTR MSG_SET_LEDS_INDIGO = _UxGT("Indigo");
  271. LSTR MSG_SET_LEDS_VIOLET = _UxGT("Violett");
  272. LSTR MSG_SET_LEDS_WHITE = _UxGT("Weiß");
  273. LSTR MSG_SET_LEDS_DEFAULT = _UxGT("Standard");
  274. LSTR MSG_LED_CHANNEL_N = _UxGT("Kanal =");
  275. LSTR MSG_LEDS2 = _UxGT("Lichter #2");
  276. LSTR MSG_NEO2_PRESETS = _UxGT("Licht #2 Voreinst.");
  277. LSTR MSG_NEO2_BRIGHTNESS = _UxGT("Helligkeit");
  278. LSTR MSG_CUSTOM_LEDS = _UxGT("Benutzerdefiniert");
  279. LSTR MSG_INTENSITY_R = _UxGT("Intensität Rot");
  280. LSTR MSG_INTENSITY_G = _UxGT("Intensität Grün");
  281. LSTR MSG_INTENSITY_B = _UxGT("Intensität Blau");
  282. LSTR MSG_INTENSITY_W = _UxGT("Intensität Weiß");
  283. LSTR MSG_LED_BRIGHTNESS = _UxGT("Helligkeit");
  284. LSTR MSG_MOVING = _UxGT("In Bewegung...");
  285. LSTR MSG_FREE_XY = _UxGT("Abstand XY");
  286. LSTR MSG_MOVE_X = _UxGT("Bewege X");
  287. LSTR MSG_MOVE_Y = _UxGT("Bewege Y");
  288. LSTR MSG_MOVE_Z = _UxGT("Bewege Z");
  289. LSTR MSG_MOVE_N = _UxGT("Bewege @");
  290. LSTR MSG_MOVE_E = _UxGT("Bewege Extruder");
  291. LSTR MSG_MOVE_EN = _UxGT("Bewege Extruder *");
  292. LSTR MSG_HOTEND_TOO_COLD = _UxGT("Hotend zu kalt");
  293. LSTR MSG_MOVE_N_MM = _UxGT(" $ mm");
  294. LSTR MSG_MOVE_01MM = _UxGT(" 0,1 mm");
  295. LSTR MSG_MOVE_1MM = _UxGT(" 1,0 mm");
  296. LSTR MSG_MOVE_10MM = _UxGT(" 10,0 mm");
  297. LSTR MSG_MOVE_100MM = _UxGT("100,0 mm");
  298. LSTR MSG_MOVE_0001IN = _UxGT("0.001 in");
  299. LSTR MSG_MOVE_001IN = _UxGT("0.010 in");
  300. LSTR MSG_MOVE_01IN = _UxGT("0.100 in");
  301. LSTR MSG_MOVE_1IN = _UxGT("1.000 in");
  302. LSTR MSG_SPEED = _UxGT("Geschw.");
  303. LSTR MSG_BED_Z = _UxGT("Bett Z");
  304. LSTR MSG_NOZZLE = _UxGT("Düse");
  305. LSTR MSG_NOZZLE_N = _UxGT("Düse ~");
  306. LSTR MSG_NOZZLE_PARKED = _UxGT("Düse geparkt");
  307. LSTR MSG_NOZZLE_STANDBY = _UxGT("Düse bereit");
  308. LSTR MSG_BED = _UxGT("Bett");
  309. LSTR MSG_CHAMBER = _UxGT("Gehäuse");
  310. LSTR MSG_COOLER = _UxGT("Laser-Kühlmittel");
  311. LSTR MSG_COOLER_TOGGLE = _UxGT("Kühler umschalten");
  312. LSTR MSG_FLOWMETER_SAFETY = _UxGT("Durchflusssicherheit");
  313. LSTR MSG_LASER = _UxGT("Laser");
  314. LSTR MSG_FAN_SPEED = _UxGT("Lüfter");
  315. LSTR MSG_FAN_SPEED_N = _UxGT("Lüfter ~");
  316. LSTR MSG_STORED_FAN_N = _UxGT("Gespeich. Lüfter ~");
  317. LSTR MSG_EXTRA_FAN_SPEED = _UxGT("Geschw. Extralüfter");
  318. LSTR MSG_EXTRA_FAN_SPEED_N = _UxGT("Geschw. Extralüfter ~");
  319. LSTR MSG_CONTROLLER_FAN = _UxGT("Lüfter Kontroller");
  320. LSTR MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("Lüfter Leerlauf");
  321. LSTR MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("Motorlast Modus");
  322. LSTR MSG_CONTROLLER_FAN_SPEED = _UxGT("Lüfter Motorlast");
  323. LSTR MSG_CONTROLLER_FAN_DURATION = _UxGT("Ausschalt Delay");
  324. LSTR MSG_FLOW = _UxGT("Flussrate");
  325. LSTR MSG_FLOW_N = _UxGT("Flussrate ~");
  326. LSTR MSG_CONTROL = _UxGT("Einstellungen");
  327. LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" min");
  328. LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" max");
  329. LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Faktor");
  330. LSTR MSG_AUTOTEMP = _UxGT("Auto Temperatur");
  331. LSTR MSG_LCD_ON = _UxGT("an");
  332. LSTR MSG_LCD_OFF = _UxGT("aus");
  333. LSTR MSG_PID_AUTOTUNE = _UxGT("PID Autotune");
  334. LSTR MSG_PID_AUTOTUNE_E = _UxGT("PID Autotune *");
  335. LSTR MSG_PID_CYCLE = _UxGT("PID Zyklus");
  336. LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("PID Tuning fertig");
  337. LSTR MSG_PID_AUTOTUNE_FAILED = _UxGT("PID Autotune fehlge.!");
  338. LSTR MSG_BAD_EXTRUDER_NUM = _UxGT("ungültiger Extruder.");
  339. LSTR MSG_TEMP_TOO_HIGH = _UxGT("Temperatur zu hoch.");
  340. LSTR MSG_TIMEOUT = _UxGT("Timeout.");
  341. LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Autotune fehlge.! Ungültiger Extruder");
  342. LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Autotune fehlge.! Temperatur zu hoch.");
  343. LSTR MSG_PID_TIMEOUT = _UxGT("Autotune fehlge.! Timeout.");
  344. LSTR MSG_MPC_MEASURING_AMBIENT = _UxGT("teste Wärmeverlust");
  345. LSTR MSG_MPC_AUTOTUNE = _UxGT("Autotune MPC");
  346. LSTR MSG_MPC_EDIT = _UxGT("MPC * bearbeiten");
  347. LSTR MSG_MPC_POWER_E = _UxGT("* Leistung");
  348. LSTR MSG_MPC_BLOCK_HEAT_CAPACITY_E = _UxGT("Block C *");
  349. LSTR MSG_SENSOR_RESPONSIVENESS_E = _UxGT("Sensor res *");
  350. LSTR MSG_MPC_AMBIENT_XFER_COEFF_E = _UxGT("Ambient h *");
  351. LSTR MSG_MPC_AMBIENT_XFER_COEFF_FAN_E = _UxGT("Amb. h fan *");
  352. LSTR MSG_SELECT = _UxGT("Auswählen");
  353. LSTR MSG_SELECT_E = _UxGT("Auswählen *");
  354. LSTR MSG_ACC = _UxGT("Beschleunigung");
  355. LSTR MSG_JERK = _UxGT("Jerk");
  356. LSTR MSG_VA_JERK = _UxGT("Max ") STR_A _UxGT(" Jerk");
  357. LSTR MSG_VB_JERK = _UxGT("Max ") STR_B _UxGT(" Jerk");
  358. LSTR MSG_VC_JERK = _UxGT("Max ") STR_C _UxGT(" Jerk");
  359. LSTR MSG_VN_JERK = _UxGT("Max @ Jerk");
  360. LSTR MSG_VE_JERK = _UxGT("Max ") STR_E _UxGT(" Jerk");
  361. LSTR MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev");
  362. LSTR MSG_MAX_SPEED = _UxGT("Max Geschw. (mm/s)");
  363. LSTR MSG_VMAX_A = _UxGT("V max ") STR_A;
  364. LSTR MSG_VMAX_B = _UxGT("V max ") STR_B;
  365. LSTR MSG_VMAX_C = _UxGT("V max ") STR_C;
  366. LSTR MSG_VMAX_N = _UxGT("V max @");
  367. LSTR MSG_VMAX_E = _UxGT("V max ") STR_E;
  368. LSTR MSG_VMAX_EN = _UxGT("V max *");
  369. LSTR MSG_VMIN = _UxGT("V min ");
  370. LSTR MSG_VTRAV_MIN = _UxGT("V min Leerfahrt");
  371. LSTR MSG_ACCELERATION = _UxGT("Beschleunigung");
  372. LSTR MSG_AMAX_A = _UxGT("A max ") STR_A;
  373. LSTR MSG_AMAX_B = _UxGT("A max ") STR_B;
  374. LSTR MSG_AMAX_C = _UxGT("A max ") STR_C;
  375. LSTR MSG_AMAX_N = _UxGT("A max @");
  376. LSTR MSG_AMAX_E = _UxGT("A max ") STR_E;
  377. LSTR MSG_AMAX_EN = _UxGT("A max *");
  378. LSTR MSG_A_RETRACT = _UxGT("A Einzug");
  379. LSTR MSG_A_TRAVEL = _UxGT("A Leerfahrt");
  380. LSTR MSG_XY_FREQUENCY_LIMIT = _UxGT("max. Frequenz");
  381. LSTR MSG_XY_FREQUENCY_FEEDRATE = _UxGT("min. Vorschub");
  382. LSTR MSG_STEPS_PER_MM = _UxGT("Steps/mm");
  383. LSTR MSG_A_STEPS = STR_A _UxGT(" Steps/mm");
  384. LSTR MSG_B_STEPS = STR_B _UxGT(" Steps/mm");
  385. LSTR MSG_C_STEPS = STR_C _UxGT(" Steps/mm");
  386. LSTR MSG_N_STEPS = _UxGT("@ Steps/mm");
  387. LSTR MSG_E_STEPS = _UxGT("E Steps/mm");
  388. LSTR MSG_EN_STEPS = _UxGT("* Steps/mm");
  389. LSTR MSG_TEMPERATURE = _UxGT("Temperatur");
  390. LSTR MSG_MOTION = _UxGT("Bewegung");
  391. LSTR MSG_FILAMENT = _UxGT("Filament");
  392. LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm") SUPERSCRIPT_THREE;
  393. LSTR MSG_VOLUMETRIC_LIMIT = _UxGT("E Limit in mm") SUPERSCRIPT_THREE;
  394. LSTR MSG_VOLUMETRIC_LIMIT_E = _UxGT("E Limit *");
  395. LSTR MSG_FILAMENT_DIAM = _UxGT("Filamentdurchmesser");
  396. LSTR MSG_FILAMENT_DIAM_E = _UxGT("Filamentdurchmesser *");
  397. LSTR MSG_FILAMENT_UNLOAD = _UxGT("Entladen mm");
  398. LSTR MSG_FILAMENT_LOAD = _UxGT("Laden mm");
  399. LSTR MSG_ADVANCE_K = _UxGT("Vorschubfaktor");
  400. LSTR MSG_ADVANCE_K_E = _UxGT("Vorschubfaktor *");
  401. LSTR MSG_CONTRAST = _UxGT("LCD-Kontrast");
  402. LSTR MSG_BRIGHTNESS = _UxGT("LCD-Helligkeit");
  403. LSTR MSG_SCREEN_TIMEOUT = _UxGT("LCD Timeout (m)");
  404. LSTR MSG_BRIGHTNESS_OFF = _UxGT("LCD ausschalten");
  405. LSTR MSG_STORE_EEPROM = _UxGT("Konfig. speichern");
  406. LSTR MSG_LOAD_EEPROM = _UxGT("Konfig. laden");
  407. LSTR MSG_RESTORE_DEFAULTS = _UxGT("Standardwerte laden");
  408. LSTR MSG_INIT_EEPROM = _UxGT("Werkseinstellungen");
  409. LSTR MSG_ERR_EEPROM_CRC = _UxGT("EEPROM CRC Fehler");
  410. LSTR MSG_ERR_EEPROM_INDEX = _UxGT("EEPROM Index Fehler");
  411. LSTR MSG_ERR_EEPROM_VERSION = _UxGT("EEPROM Version Fehler");
  412. LSTR MSG_SETTINGS_STORED = _UxGT("Einstell. gespei.");
  413. LSTR MSG_MEDIA_UPDATE = _UxGT("FW Update vom Medium");
  414. LSTR MSG_RESET_PRINTER = _UxGT("Drucker neustarten");
  415. LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Aktualisieren");
  416. LSTR MSG_INFO_SCREEN = _UxGT("Info");
  417. LSTR MSG_INFO_MACHINENAME = _UxGT("Machine Name");
  418. LSTR MSG_INFO_SIZE = _UxGT("Größe");
  419. LSTR MSG_INFO_FWVERSION = _UxGT("Firmware Version");
  420. LSTR MSG_INFO_BUILD = _UxGT("Build Datum");
  421. LSTR MSG_PREPARE = _UxGT("Vorbereitung");
  422. LSTR MSG_TUNE = _UxGT("Justierung");
  423. LSTR MSG_POWER_MONITOR = _UxGT("Power Monitor");
  424. LSTR MSG_CURRENT = _UxGT("Strom");
  425. LSTR MSG_VOLTAGE = _UxGT("Spannung");
  426. LSTR MSG_POWER = _UxGT("Power");
  427. LSTR MSG_START_PRINT = _UxGT("Starte Druck");
  428. LSTR MSG_BUTTON_NEXT = _UxGT("Weiter");
  429. LSTR MSG_BUTTON_INIT = _UxGT("Bestätigen");
  430. LSTR MSG_BUTTON_STOP = _UxGT("Stop");
  431. LSTR MSG_BUTTON_PRINT = _UxGT("Drucken");
  432. LSTR MSG_BUTTON_RESET = _UxGT("Reseten");
  433. LSTR MSG_BUTTON_IGNORE = _UxGT("Ignorieren");
  434. LSTR MSG_BUTTON_CANCEL = _UxGT("Abbrechen");
  435. LSTR MSG_BUTTON_CONFIRM = _UxGT("Bestätigen");
  436. LSTR MSG_BUTTON_CONTINUE = _UxGT("Fortsetzen");
  437. LSTR MSG_BUTTON_DONE = _UxGT("Fertig");
  438. LSTR MSG_BUTTON_BACK = _UxGT("Zurück");
  439. LSTR MSG_BUTTON_PROCEED = _UxGT("Weiter");
  440. LSTR MSG_BUTTON_SKIP = _UxGT("Überspringen");
  441. LSTR MSG_BUTTON_INFO = _UxGT("Info");
  442. LSTR MSG_BUTTON_LEVEL = _UxGT("Level");
  443. LSTR MSG_BUTTON_PAUSE = _UxGT("Pause");
  444. LSTR MSG_BUTTON_RESUME = _UxGT("Fortsetzen");
  445. LSTR MSG_BUTTON_ADVANCED = _UxGT("Erweitert");
  446. LSTR MSG_BUTTON_SAVE = _UxGT("Speichern");
  447. LSTR MSG_BUTTON_PURGE = _UxGT("Reinigen");
  448. LSTR MSG_PAUSING = _UxGT("Pause...");
  449. LSTR MSG_PAUSE_PRINT = _UxGT("SD-Druck pausieren");
  450. LSTR MSG_ADVANCED_PAUSE = _UxGT("Erweiterte Pause");
  451. LSTR MSG_RESUME_PRINT = _UxGT("SD-Druck fortsetzen");
  452. LSTR MSG_HOST_START_PRINT = _UxGT("Host-Druck starten");
  453. LSTR MSG_STOP_PRINT = _UxGT("SD-Druck abbrechen");
  454. LSTR MSG_END_LOOPS = _UxGT("Wiederholung beenden");
  455. LSTR MSG_PRINTING_OBJECT = _UxGT("Objekt drucken");
  456. LSTR MSG_CANCEL_OBJECT = _UxGT("Objekt abbrechen");
  457. LSTR MSG_CANCEL_OBJECT_N = _UxGT("Objekt abbrechen =");
  458. LSTR MSG_OUTAGE_RECOVERY = _UxGT("Wiederh. n. Stroma.");
  459. LSTR MSG_CONTINUE_PRINT_JOB = _UxGT("Druckauftrag fortset.");
  460. LSTR MSG_MEDIA_MENU = _UxGT("Druck vom Medium");
  461. LSTR MSG_NO_MEDIA = _UxGT("Kein Medium");
  462. LSTR MSG_DWELL = _UxGT("Warten...");
  463. LSTR MSG_USERWAIT = _UxGT("Klick zum Fortsetzen");
  464. LSTR MSG_PRINT_PAUSED = _UxGT("Druck pausiert...");
  465. LSTR MSG_PRINTING = _UxGT("Druckt...");
  466. LSTR MSG_STOPPING = _UxGT("Stoppen...");
  467. LSTR MSG_REMAINING_TIME = _UxGT("Verbleiben");
  468. LSTR MSG_PRINT_ABORTED = _UxGT("Druck abgebrochen");
  469. LSTR MSG_PRINT_DONE = _UxGT("Druck fertig");
  470. LSTR MSG_PRINTER_KILLED = _UxGT("Drucker killed!");
  471. LSTR MSG_TURN_OFF = _UxGT("Drucker ausschalten");
  472. LSTR MSG_NO_MOVE = _UxGT("Motoren angeschaltet");
  473. LSTR MSG_KILLED = _UxGT("ABGEBROCHEN");
  474. LSTR MSG_STOPPED = _UxGT("ANGEHALTEN");
  475. LSTR MSG_FWRETRACT = _UxGT("Firmware Retract");
  476. LSTR MSG_CONTROL_RETRACT = _UxGT("Einzug mm");
  477. LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Wechs. Einzug mm");
  478. LSTR MSG_CONTROL_RETRACTF = _UxGT("V Einzug");
  479. LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Z-Sprung mm");
  480. LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("Unretr. mm");
  481. LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Wechs. Unretr. mm");
  482. LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Unretract V");
  483. LSTR MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V");
  484. LSTR MSG_AUTORETRACT = _UxGT("Autom. Einzug");
  485. LSTR MSG_FILAMENT_SWAP_LENGTH = _UxGT("Einzugslänge");
  486. LSTR MSG_FILAMENT_SWAP_EXTRA = _UxGT("Extra Einzug");
  487. LSTR MSG_FILAMENT_PURGE_LENGTH = _UxGT("Entladelänge");
  488. LSTR MSG_TOOL_CHANGE = _UxGT("Werkzeugwechsel");
  489. LSTR MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z anheben");
  490. LSTR MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("Prime-Geschwin.");
  491. LSTR MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("Einzug-Geschwin.");
  492. LSTR MSG_FILAMENT_PARK_ENABLED = _UxGT("Kopf parken");
  493. LSTR MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("Rückzugsgeschwindigkeit");
  494. LSTR MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("Lüfter Geschwindigkeit");
  495. LSTR MSG_SINGLENOZZLE_FAN_TIME = _UxGT("Lüfter Zeit");
  496. LSTR MSG_TOOL_MIGRATION_ON = _UxGT("Auto AN");
  497. LSTR MSG_TOOL_MIGRATION_OFF = _UxGT("Auto AUS");
  498. LSTR MSG_TOOL_MIGRATION = _UxGT("Werkzeugmigration");
  499. LSTR MSG_TOOL_MIGRATION_AUTO = _UxGT("Auto-Migration");
  500. LSTR MSG_TOOL_MIGRATION_END = _UxGT("Letzter Extruder");
  501. LSTR MSG_TOOL_MIGRATION_SWAP = _UxGT("Migrieren zu *");
  502. LSTR MSG_FILAMENTCHANGE = _UxGT("Filament wechseln");
  503. LSTR MSG_FILAMENTCHANGE_E = _UxGT("Filament wechseln *");
  504. LSTR MSG_FILAMENTLOAD = _UxGT("Filament laden");
  505. LSTR MSG_FILAMENTLOAD_E = _UxGT("Filament laden *");
  506. LSTR MSG_FILAMENTUNLOAD = _UxGT("Filament entladen");
  507. LSTR MSG_FILAMENTUNLOAD_E = _UxGT("Filament entladen *");
  508. LSTR MSG_FILAMENTUNLOAD_ALL = _UxGT("Alles entladen");
  509. LSTR MSG_ATTACH_MEDIA = _UxGT("Medium initial."); // Manually initialize the SD-card via user interface
  510. LSTR MSG_CHANGE_MEDIA = _UxGT("Medium getauscht"); // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
  511. LSTR MSG_RELEASE_MEDIA = _UxGT("Medium freigeben"); // if Marlin gets confused - M22
  512. LSTR MSG_ZPROBE_OUT = _UxGT("Z-Sonde außerhalb");
  513. LSTR MSG_SKEW_FACTOR = _UxGT("Korrekturfaktor");
  514. LSTR MSG_BLTOUCH = _UxGT("BLTouch");
  515. LSTR MSG_BLTOUCH_SELFTEST = _UxGT("Selbsttest");
  516. LSTR MSG_BLTOUCH_RESET = _UxGT("Zurücksetzen");
  517. LSTR MSG_BLTOUCH_STOW = _UxGT("Einfahren");
  518. LSTR MSG_BLTOUCH_DEPLOY = _UxGT("Ausfahren");
  519. LSTR MSG_BLTOUCH_SW_MODE = _UxGT("SW-Modus");
  520. LSTR MSG_BLTOUCH_SPEED_MODE = _UxGT("High Speed");
  521. LSTR MSG_BLTOUCH_5V_MODE = _UxGT("5V-Modus");
  522. LSTR MSG_BLTOUCH_OD_MODE = _UxGT("OD-Modus");
  523. LSTR MSG_BLTOUCH_MODE_STORE = _UxGT("Mode-Store");
  524. LSTR MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Setze auf 5V");
  525. LSTR MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Setze auf OD");
  526. LSTR MSG_BLTOUCH_MODE_ECHO = _UxGT("Modus: ");
  527. LSTR MSG_BLTOUCH_MODE_CHANGE = _UxGT("ACHTUNG: Falsche Einstellung - kann zu Beschädigung führen! Fortfahren?");
  528. LSTR MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
  529. LSTR MSG_TOUCHMI_INIT = _UxGT("TouchMI initial.");
  530. LSTR MSG_TOUCHMI_ZTEST = _UxGT("Test Z-Versatz");
  531. LSTR MSG_TOUCHMI_SAVE = _UxGT("Speichern");
  532. LSTR MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("TouchMI ausfahren");
  533. LSTR MSG_MANUAL_DEPLOY = _UxGT("Z-Sonde ausfahren");
  534. LSTR MSG_MANUAL_STOW = _UxGT("Z-Sonde einfahren");
  535. LSTR MSG_HOME_FIRST = _UxGT("Vorher %s%s%s homen");
  536. LSTR MSG_ZPROBE_SETTINGS = _UxGT("Sondeneinstellungen");
  537. LSTR MSG_ZPROBE_OFFSETS = _UxGT("Sondenversatz");
  538. LSTR MSG_ZPROBE_XOFFSET = _UxGT("Sondenversatz X");
  539. LSTR MSG_ZPROBE_YOFFSET = _UxGT("Sondenversatz Y");
  540. LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Sondenversatz Z");
  541. LSTR MSG_ZPROBE_MARGIN = _UxGT("Sondenrand");
  542. LSTR MSG_Z_FEED_RATE = _UxGT("Z-Vorschub");
  543. LSTR MSG_ENABLE_HS_MODE = _UxGT("HS-Modus aktivieren");
  544. LSTR MSG_MOVE_NOZZLE_TO_BED = _UxGT("Bewege Düse zum Bett");
  545. LSTR MSG_BABYSTEP_X = _UxGT("Babystep X");
  546. LSTR MSG_BABYSTEP_Y = _UxGT("Babystep Y");
  547. LSTR MSG_BABYSTEP_Z = _UxGT("Babystep Z");
  548. LSTR MSG_BABYSTEP_N = _UxGT("Babystep @");
  549. LSTR MSG_BABYSTEP_TOTAL = _UxGT("Total");
  550. LSTR MSG_ENDSTOP_ABORT = _UxGT("Abbr. mit Endstopp");
  551. LSTR MSG_HEATING_FAILED_LCD = _UxGT("HEIZEN ERFOLGLOS");
  552. LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("REDUND. TEMP-ABWEI.");
  553. LSTR MSG_THERMAL_RUNAWAY = " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT");
  554. LSTR MSG_TEMP_MALFUNCTION = _UxGT("TEMP-FEHLER");
  555. LSTR MSG_THERMAL_RUNAWAY_BED = _UxGT("BETT") " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT");
  556. LSTR MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("GEH.") " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT");
  557. LSTR MSG_THERMAL_RUNAWAY_COOLER = _UxGT("Kühler Runaway");
  558. LSTR MSG_COOLING_FAILED = _UxGT("Kühlung fehlgeschla.");
  559. LSTR MSG_ERR_MAXTEMP = " " LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN");
  560. LSTR MSG_ERR_MINTEMP = " " LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN");
  561. LSTR MSG_HALTED = _UxGT("DRUCKER GESTOPPT");
  562. LSTR MSG_PLEASE_WAIT = _UxGT("Bitte warten...");
  563. LSTR MSG_PLEASE_RESET = _UxGT("Bitte neustarten");
  564. LSTR MSG_PREHEATING = _UxGT("vorheizen...");
  565. LSTR MSG_HEATING = _UxGT("heizt...");
  566. LSTR MSG_COOLING = _UxGT("kühlt...");
  567. LSTR MSG_BED_HEATING = _UxGT("Bett heizt...");
  568. LSTR MSG_BED_COOLING = _UxGT("Bett kühlt...");
  569. LSTR MSG_PROBE_HEATING = _UxGT("Sonde heizt...");
  570. LSTR MSG_PROBE_COOLING = _UxGT("Sonde kühlt...");
  571. LSTR MSG_CHAMBER_HEATING = _UxGT("Gehäuse heizt...");
  572. LSTR MSG_CHAMBER_COOLING = _UxGT("Gehäuse kühlt...");
  573. LSTR MSG_LASER_COOLING = _UxGT("Laser kühlt...");
  574. LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta kalibrieren");
  575. LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Kalibriere X");
  576. LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibriere Y");
  577. LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibriere Z");
  578. LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibriere Mitte");
  579. LSTR MSG_DELTA_SETTINGS = _UxGT("Delta Einst. anzeig.");
  580. LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("Autom. Kalibrierung");
  581. LSTR MSG_DELTA_DIAG_ROD = _UxGT("Diag Rod");
  582. LSTR MSG_DELTA_HEIGHT = _UxGT("Höhe");
  583. LSTR MSG_DELTA_RADIUS = _UxGT("Radius");
  584. LSTR MSG_INFO_MENU = _UxGT("Über den Drucker");
  585. LSTR MSG_INFO_PRINTER_MENU = _UxGT("Drucker-Info");
  586. LSTR MSG_3POINT_LEVELING = _UxGT("3-Punkt-Nivellierung");
  587. LSTR MSG_LINEAR_LEVELING = _UxGT("Lineare Nivellierung");
  588. LSTR MSG_BILINEAR_LEVELING = _UxGT("Bilineare Nivell.");
  589. LSTR MSG_UBL_LEVELING = _UxGT("Einheit. Bettnivell.");
  590. LSTR MSG_MESH_LEVELING = _UxGT("Netz-Nivellierung");
  591. LSTR MSG_MESH_DONE = _UxGT("Nivellierung fertig");
  592. LSTR MSG_INFO_STATS_MENU = _UxGT("Drucker-Statistik");
  593. LSTR MSG_INFO_BOARD_MENU = _UxGT("Board-Info");
  594. LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistoren");
  595. LSTR MSG_INFO_EXTRUDERS = _UxGT("Extruder");
  596. LSTR MSG_INFO_BAUDRATE = _UxGT("Baudrate");
  597. LSTR MSG_INFO_PROTOCOL = _UxGT("Protokoll");
  598. LSTR MSG_INFO_RUNAWAY_OFF = _UxGT("Runaway Watch: AUS");
  599. LSTR MSG_INFO_RUNAWAY_ON = _UxGT("Runaway Watch: AN");
  600. LSTR MSG_HOTEND_IDLE_TIMEOUT = _UxGT("Hotend Idle Timeout");
  601. LSTR MSG_FAN_SPEED_FAULT = _UxGT("Fehler Lüftergeschw.");
  602. LSTR MSG_CASE_LIGHT = _UxGT("Beleuchtung");
  603. LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Helligkeit");
  604. LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("Falscher Drucker");
  605. LSTR MSG_COLORS_GET = _UxGT("Farbe");
  606. LSTR MSG_COLORS_SELECT = _UxGT("Farben auswählen");
  607. LSTR MSG_COLORS_APPLIED = _UxGT("Farben verwenden");
  608. LSTR MSG_COLORS_RED = _UxGT("Rot");
  609. LSTR MSG_COLORS_GREEN = _UxGT("Grün");
  610. LSTR MSG_COLORS_BLUE = _UxGT("Blau");
  611. LSTR MSG_COLORS_WHITE = _UxGT("Weiß");
  612. LSTR MSG_UI_LANGUAGE = _UxGT("UI Sprache");
  613. LSTR MSG_SOUND_ENABLE = _UxGT("Ton aktivieren");
  614. LSTR MSG_LOCKSCREEN = _UxGT("Bildschirm sperren");
  615. LSTR MSG_LOCKSCREEN_LOCKED = _UxGT("Drucker ist gesperrt,");
  616. LSTR MSG_LOCKSCREEN_UNLOCK = _UxGT("Scrollen zum Entsper.");
  617. #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2
  618. LSTR MSG_MEDIA_NOT_INSERTED = _UxGT("Kein Medium eingelegt.");
  619. LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Bitte auf Neustart warten.");
  620. LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte das Hotend vorheizen.");
  621. LSTR MSG_INFO_PRINT_COUNT_RESET = _UxGT("Druckzähler zurücksetzen");
  622. LSTR MSG_INFO_PRINT_COUNT = _UxGT("Gesamte Drucke");
  623. LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Komplette Drucke");
  624. LSTR MSG_INFO_PRINT_TIME = _UxGT("Gesamte Druckzeit");
  625. LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Längste Druckzeit");
  626. LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Gesamt Extrudiert");
  627. #else
  628. LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Auf Neustart warten");
  629. LSTR MSG_PLEASE_PREHEAT = _UxGT("Bitte vorheizen");
  630. LSTR MSG_INFO_PRINT_COUNT = _UxGT("Drucke");
  631. LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Komplette");
  632. LSTR MSG_INFO_PRINT_TIME = _UxGT("Gesamte");
  633. LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Längste");
  634. LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Extrud.");
  635. #endif
  636. LSTR MSG_INFO_MIN_TEMP = _UxGT("Min Temp");
  637. LSTR MSG_INFO_MAX_TEMP = _UxGT("Max Temp");
  638. LSTR MSG_INFO_PSU = _UxGT("Netzteil");
  639. LSTR MSG_DRIVE_STRENGTH = _UxGT("Motorleistung");
  640. LSTR MSG_DAC_PERCENT_N = _UxGT("@ Treiber %");
  641. LSTR MSG_ERROR_TMC = _UxGT("TMC Verbindungsfehler");
  642. LSTR MSG_DAC_EEPROM_WRITE = _UxGT("Werte speichern");
  643. LSTR MSG_FILAMENT_CHANGE_HEADER = _UxGT("FILAMENT WECHSEL");
  644. LSTR MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("DRUCK PAUSIERT");
  645. LSTR MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("FILAMENT LADEN");
  646. LSTR MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("FILAMENT ENTLADEN");
  647. LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("FORTS. OPTIONEN:");
  648. LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Mehr entladen");
  649. LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Druck weiter");
  650. LSTR MSG_FILAMENT_CHANGE_PURGE_CONTINUE = _UxGT("Löschen o. fortfah.?");
  651. LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Düse: ");
  652. LSTR MSG_RUNOUT_SENSOR = _UxGT("Runout-Sensor");
  653. LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Runout-Weg mm");
  654. LSTR MSG_RUNOUT_ENABLE = _UxGT("Runout aktivieren");
  655. LSTR MSG_RUNOUT_ACTIVE = _UxGT("Runout aktiv");
  656. LSTR MSG_INVERT_EXTRUDER = _UxGT("Invert Extruder");
  657. LSTR MSG_EXTRUDER_MIN_TEMP = _UxGT("Extruder Min Temp.");
  658. LSTR MSG_FANCHECK = _UxGT("Lüftergeschw. prüfen");
  659. LSTR MSG_KILL_HOMING_FAILED = _UxGT("Homing gescheitert");
  660. LSTR MSG_LCD_PROBING_FAILED = _UxGT("Probing gescheitert");
  661. LSTR MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("FILAMENT WÄHLEN");
  662. LSTR MSG_MMU2_MENU = _UxGT("MMU");
  663. LSTR MSG_KILL_MMU2_FIRMWARE = _UxGT("Update MMU Firmware!");
  664. LSTR MSG_MMU2_NOT_RESPONDING = _UxGT("MMU handeln erfor.");
  665. LSTR MSG_MMU2_RESUME = _UxGT("Druck fortsetzen");
  666. LSTR MSG_MMU2_RESUMING = _UxGT("Fortfahren...");
  667. LSTR MSG_MMU2_LOAD_FILAMENT = _UxGT("Filament laden");
  668. LSTR MSG_MMU2_LOAD_ALL = _UxGT("Lade alle");
  669. LSTR MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Düse laden");
  670. LSTR MSG_MMU2_EJECT_FILAMENT = _UxGT("Filament auswerfen");
  671. LSTR MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Filament ~ auswerfen");
  672. LSTR MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Filament entladen ");
  673. LSTR MSG_MMU2_LOADING_FILAMENT = _UxGT("Lade Fila. %i...");
  674. LSTR MSG_MMU2_EJECTING_FILAMENT = _UxGT("Fila. auswerfen...");
  675. LSTR MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Fila. entladen...");
  676. LSTR MSG_MMU2_ALL = _UxGT("Alle");
  677. LSTR MSG_MMU2_FILAMENT_N = _UxGT("Filament ~");
  678. LSTR MSG_MMU2_RESET = _UxGT("setze MMU zurück");
  679. LSTR MSG_MMU2_RESETTING = _UxGT("MMU zurücksetzen...");
  680. LSTR MSG_MMU2_EJECT_RECOVER = _UxGT("Entfernen, klicken");
  681. LSTR MSG_MIX = _UxGT("Mix");
  682. LSTR MSG_MIX_COMPONENT_N = _UxGT("Komponente =");
  683. LSTR MSG_MIXER = _UxGT("Mixer");
  684. LSTR MSG_GRADIENT = _UxGT("Gradient"); // equal Farbverlauf
  685. LSTR MSG_FULL_GRADIENT = _UxGT("Volle Gradient");
  686. LSTR MSG_TOGGLE_MIX = _UxGT("Mix umschalten");
  687. LSTR MSG_CYCLE_MIX = _UxGT("Zyklus Mix");
  688. LSTR MSG_GRADIENT_MIX = _UxGT("Gradient Mix");
  689. LSTR MSG_REVERSE_GRADIENT = _UxGT("Umgekehrte Gradient");
  690. LSTR MSG_ACTIVE_VTOOL = _UxGT("Aktives V-Tool");
  691. LSTR MSG_START_VTOOL = _UxGT("V-Tool Start");
  692. LSTR MSG_END_VTOOL = _UxGT("V-Tool Ende");
  693. LSTR MSG_GRADIENT_ALIAS = _UxGT("V-Tool Alias");
  694. LSTR MSG_RESET_VTOOLS = _UxGT("V-Tools Reseten");
  695. LSTR MSG_COMMIT_VTOOL = _UxGT("V-Tool Mix sichern");
  696. LSTR MSG_VTOOLS_RESET = _UxGT("V-Tools ist resetet");
  697. LSTR MSG_START_Z = _UxGT("Z Start:");
  698. LSTR MSG_END_Z = _UxGT("Z Ende:");
  699. LSTR MSG_GAMES = _UxGT("Spiele");
  700. LSTR MSG_BRICKOUT = _UxGT("Brickout");
  701. LSTR MSG_INVADERS = _UxGT("Invaders");
  702. LSTR MSG_SNAKE = _UxGT("Sn4k3");
  703. LSTR MSG_MAZE = _UxGT("Maze");
  704. LSTR MSG_BAD_PAGE = _UxGT("ungült. Seitenzahl");
  705. LSTR MSG_BAD_PAGE_SPEED = _UxGT("ungült. Seitengeschw.");
  706. LSTR MSG_EDIT_PASSWORD = _UxGT("Passwort bearbeiten");
  707. LSTR MSG_LOGIN_REQUIRED = _UxGT("Login erforderlich");
  708. LSTR MSG_PASSWORD_SETTINGS = _UxGT("Passwort Einstellungen");
  709. LSTR MSG_ENTER_DIGIT = _UxGT("PIN eingeben");
  710. LSTR MSG_CHANGE_PASSWORD = _UxGT("Passwort ändern");
  711. LSTR MSG_REMOVE_PASSWORD = _UxGT("Passwort löschen");
  712. LSTR MSG_PASSWORD_SET = _UxGT("Passwort ist ");
  713. LSTR MSG_START_OVER = _UxGT("von vorn beginnen");
  714. LSTR MSG_REMINDER_SAVE_SETTINGS = _UxGT("Bald speichern!");
  715. LSTR MSG_PASSWORD_REMOVED = _UxGT("Passwort gelöscht");
  716. //
  717. // Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen
  718. // ...oder 2 Zeilen auf einem 3-Zeilen-Display.
  719. #if LCD_HEIGHT >= 4
  720. LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("Knopf drücken um", "Druck fortzusetzen"));
  721. LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_2_LINE("Druck ist", "pausiert..."));
  722. LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Warte auf den", "Start des", "Filamentwechsels..."));
  723. LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Filament einlegen", "und Knopf drücken", "um fortzusetzen"));
  724. LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Knopf drücken um", "Düse aufzuheizen"));
  725. LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Düse heizt auf", "bitte warten..."));
  726. LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_3_LINE("Warte auf", "Entnahme", "des Filaments..."));
  727. LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_3_LINE("Warte auf", "Laden des", "Filaments..."));
  728. LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_3_LINE("Warte auf", "Spülung", "der Düse..."));
  729. LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_3_LINE("Klicke um", "die Düsenspülung", "zu beenden"));
  730. LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_3_LINE("Warte auf", "Fortsetzen des", "Drucks..."));
  731. #else // LCD_HEIGHT < 4
  732. LSTR MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("Klick zum Fortsetzen"));
  733. LSTR MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("Pausiert..."));
  734. LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Bitte warten..."));
  735. LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Laden und Klick"));
  736. LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Klick zum Heizen"));
  737. LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Heizen..."));
  738. LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Entnehmen..."));
  739. LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Laden..."));
  740. LSTR MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Spülen..."));
  741. LSTR MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("Klick zum beenden", "der Düsenspülung"));
  742. LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Fortsetzen..."));
  743. #endif // LCD_HEIGHT < 4
  744. LSTR MSG_TMC_DRIVERS = _UxGT("TMC Treiber"); // Max length 18 characters
  745. LSTR MSG_TMC_CURRENT = _UxGT("Treiber Strom");
  746. LSTR MSG_TMC_HYBRID_THRS = _UxGT("Hybrid threshold");
  747. LSTR MSG_TMC_HOMING_THRS = _UxGT("Sensorloses Homing");
  748. LSTR MSG_TMC_STEPPING_MODE = _UxGT("Schrittmodus");
  749. LSTR MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop einsch.");
  750. LSTR MSG_SERVICE_RESET = _UxGT("Reset");
  751. LSTR MSG_SERVICE_IN = _UxGT(" im:");
  752. LSTR MSG_BACKLASH = _UxGT("Spiel");
  753. LSTR MSG_BACKLASH_CORRECTION = _UxGT("Korrektur");
  754. LSTR MSG_BACKLASH_SMOOTHING = _UxGT("Glätten");
  755. LSTR MSG_LEVEL_X_AXIS = _UxGT("X Achse leveln");
  756. LSTR MSG_AUTO_CALIBRATE = _UxGT("Auto. Kalibiren");
  757. #if ENABLED(TOUCH_UI_FTDI_EVE)
  758. LSTR MSG_HEATER_TIMEOUT = _UxGT("Idle Timeout, Temperatur gefallen. Drücke Okay, um erneut aufzuheizen und fortzufahren.");
  759. #else
  760. LSTR MSG_HEATER_TIMEOUT = _UxGT("Heizungs Timeout");
  761. #endif
  762. LSTR MSG_REHEAT = _UxGT("Erneut aufheizen");
  763. LSTR MSG_REHEATING = _UxGT("Erneut aufhei. ...");
  764. LSTR MSG_REHEATDONE = _UxGT("Aufwärmen fertig");
  765. LSTR MSG_PROBE_WIZARD = _UxGT("Sonden-Assistent");
  766. LSTR MSG_PROBE_WIZARD_PROBING = _UxGT("Sonden-Bezug");
  767. LSTR MSG_PROBE_WIZARD_MOVING = _UxGT("Bewege zur Position");
  768. LSTR MSG_XATC = _UxGT("X-Verdreh-Assistent");
  769. LSTR MSG_XATC_DONE = _UxGT("X-Verdreh-Assi fertig!");
  770. LSTR MSG_XATC_UPDATE_Z_OFFSET = _UxGT("Z-Versatz Sonde akt. auf ");
  771. LSTR MSG_SOUND = _UxGT("Ton");
  772. LSTR MSG_TOP_LEFT = _UxGT("Oben Links");
  773. LSTR MSG_BOTTOM_LEFT = _UxGT("Unten Links");
  774. LSTR MSG_TOP_RIGHT = _UxGT("Oben Rechts");
  775. LSTR MSG_BOTTOM_RIGHT = _UxGT("Unten Rechts");
  776. LSTR MSG_CALIBRATION_COMPLETED = _UxGT("Kalibrierung beendet");
  777. LSTR MSG_CALIBRATION_FAILED = _UxGT("Kalibrierung geschei.");
  778. LSTR MSG_DRIVER_BACKWARD = _UxGT(" Driver zurück");
  779. LSTR MSG_SD_CARD = _UxGT("SD Karte");
  780. LSTR MSG_USB_DISK = _UxGT("USB Disk");
  781. LSTR MSG_HOST_SHUTDOWN = _UxGT("Host abschalten");
  782. LSTR MSG_SHORT_DAY = _UxGT("t"); // One character only
  783. LSTR MSG_SHORT_HOUR = _UxGT("h"); // One character only
  784. LSTR MSG_SHORT_MINUTE = _UxGT("m"); // One character only
  785. }