123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
- #include "../inc/MarlinConfig.h"
-
- #include "../MarlinCore.h" // for printingIsPaused
-
- #if LED_POWEROFF_TIMEOUT > 0 || BOTH(HAS_WIRED_LCD, PRINTER_EVENT_LEDS)
- #include "../feature/leds/leds.h"
- #endif
-
- #if ENABLED(HOST_ACTION_COMMANDS)
- #include "../feature/host_actions.h"
- #endif
-
- #if BOTH(BROWSE_MEDIA_ON_INSERT, PASSWORD_ON_SD_PRINT_MENU)
- #include "../feature/password/password.h"
- #endif
-
- // All displays share the MarlinUI class
- #include "marlinui.h"
- MarlinUI ui;
-
- #if HAS_DISPLAY
- #include "../gcode/queue.h"
- #include "fontutils.h"
- #endif
-
- #if ENABLED(DWIN_CREALITY_LCD)
- #include "e3v2/creality/dwin.h"
- #elif ENABLED(DWIN_LCD_PROUI)
- #include "e3v2/proui/dwin.h"
- #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
- #include "e3v2/jyersui/dwin.h"
- #endif
-
- #if ENABLED(LCD_PROGRESS_BAR) && !IS_TFTGLCD_PANEL
- #define BASIC_PROGRESS_BAR 1
- #endif
-
- #if ANY(HAS_DISPLAY, HAS_STATUS_MESSAGE, BASIC_PROGRESS_BAR)
- #include "../module/printcounter.h"
- #endif
-
- #if LCD_HAS_WAIT_FOR_MOVE
- bool MarlinUI::wait_for_move; // = false
- #endif
-
- constexpr uint8_t epps = ENCODER_PULSES_PER_STEP;
-
- #if HAS_STATUS_MESSAGE
- #if ENABLED(STATUS_MESSAGE_SCROLLING) && EITHER(HAS_WIRED_LCD, DWIN_LCD_PROUI)
- uint8_t MarlinUI::status_scroll_offset; // = 0
- #endif
- char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1];
- uint8_t MarlinUI::alert_level; // = 0
- #if HAS_STATUS_MESSAGE_TIMEOUT
- millis_t MarlinUI::status_message_expire_ms; // = 0
- #endif
- statusResetFunc_t MarlinUI::status_reset_callback; // = nullptr
- #endif
-
- #if ENABLED(SET_PROGRESS_MANUALLY)
- #if ENABLED(SET_PROGRESS_PERCENT)
- MarlinUI::progress_t MarlinUI::progress_override; // = 0
- #endif
- #if ENABLED(SET_REMAINING_TIME)
- uint32_t MarlinUI::remaining_time;
- #endif
- #if ENABLED(SET_INTERACTION_TIME)
- uint32_t MarlinUI::interaction_time;
- #endif
- #endif
-
- #if HAS_MULTI_LANGUAGE
- uint8_t MarlinUI::language; // Initialized by settings.load()
- void MarlinUI::set_language(const uint8_t lang) {
- if (lang < NUM_LANGUAGES) {
- language = lang;
- TERN_(HAS_MARLINUI_U8GLIB, update_language_font());
- return_to_status();
- refresh();
- }
- }
- #endif
-
- #if HAS_LCD_CONTRAST
- uint8_t MarlinUI::contrast = LCD_CONTRAST_DEFAULT; // Initialized by settings.load()
- void MarlinUI::set_contrast(const uint8_t value) {
- contrast = constrain(value, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX);
- _set_contrast();
- }
- #endif
-
- #if HAS_LCD_BRIGHTNESS
- uint8_t MarlinUI::brightness = LCD_BRIGHTNESS_DEFAULT;
- bool MarlinUI::backlight = true;
-
- void MarlinUI::set_brightness(const uint8_t value) {
- backlight = !!value;
- if (backlight) brightness = constrain(value, LCD_BRIGHTNESS_MIN, LCD_BRIGHTNESS_MAX);
- _set_brightness();
- }
- #endif
-
- #if ENABLED(SOUND_MENU_ITEM)
- bool MarlinUI::sound_on = ENABLED(SOUND_ON_DEFAULT);
- #endif
-
- #if ENABLED(PCA9632_BUZZER)
- void MarlinUI::buzz(const long duration, const uint16_t freq) {
- if (sound_on) PCA9632_buzz(duration, freq);
- }
- #endif
-
- #if HAS_PREHEAT
- #include "../module/temperature.h"
-
- preheat_t MarlinUI::material_preset[PREHEAT_COUNT]; // Initialized by settings.load()
-
- FSTR_P MarlinUI::get_preheat_label(const uint8_t m) {
- #define _PDEF(N) static PGMSTR(preheat_##N##_label, PREHEAT_##N##_LABEL);
- #define _PLBL(N) preheat_##N##_label,
- REPEAT_1(PREHEAT_COUNT, _PDEF);
- static PGM_P const preheat_labels[PREHEAT_COUNT] PROGMEM = { REPEAT_1(PREHEAT_COUNT, _PLBL) };
- return FPSTR((PGM_P)pgm_read_ptr(&preheat_labels[m]));
- }
-
- void MarlinUI::apply_preheat(const uint8_t m, const uint8_t pmask, const uint8_t e/*=active_extruder*/) {
- const preheat_t &pre = material_preset[m];
- TERN_(HAS_HOTEND, if (TEST(pmask, PT_HOTEND)) thermalManager.setTargetHotend(pre.hotend_temp, e));
- TERN_(HAS_HEATED_BED, if (TEST(pmask, PT_BED)) thermalManager.setTargetBed(pre.bed_temp));
- //TERN_(HAS_HEATED_CHAMBER, if (TEST(pmask, PT_CHAMBER)) thermalManager.setTargetBed(pre.chamber_temp));
- TERN_(HAS_FAN, if (TEST(pmask, PT_FAN)) thermalManager.set_fan_speed(0, pre.fan_speed));
- }
- #endif
-
- #if EITHER(HAS_MARLINUI_MENU, EXTENSIBLE_UI)
- bool MarlinUI::lcd_clicked;
- #endif
-
- #if LCD_WITH_BLINK
-
- bool MarlinUI::get_blink() {
- static uint8_t blink = 0;
- static millis_t next_blink_ms = 0;
- millis_t ms = millis();
- if (ELAPSED(ms, next_blink_ms)) {
- blink ^= 0xFF;
- next_blink_ms = ms + 1000 - (LCD_UPDATE_INTERVAL) / 2;
- }
- return blink != 0;
- }
-
- #endif
-
- // Encoder Handling
- #if HAS_ENCODER_ACTION
- uint32_t MarlinUI::encoderPosition;
- volatile int8_t encoderDiff; // Updated in update_buttons, added to encoderPosition every LCD update
- #endif
-
- #if LCD_BACKLIGHT_TIMEOUT_MINS
-
- constexpr uint8_t MarlinUI::backlight_timeout_min, MarlinUI::backlight_timeout_max;
-
- uint8_t MarlinUI::backlight_timeout_minutes; // Initialized by settings.load()
- millis_t MarlinUI::backlight_off_ms = 0;
- void MarlinUI::refresh_backlight_timeout() {
- backlight_off_ms = backlight_timeout_minutes ? millis() + backlight_timeout_minutes * 60UL * 1000UL : 0;
- WRITE(LCD_BACKLIGHT_PIN, HIGH);
- }
-
- #elif HAS_DISPLAY_SLEEP
-
- constexpr uint8_t MarlinUI::sleep_timeout_min, MarlinUI::sleep_timeout_max;
-
- uint8_t MarlinUI::sleep_timeout_minutes; // Initialized by settings.load()
- millis_t MarlinUI::screen_timeout_millis = 0;
- #if DISABLED(TFT_COLOR_UI)
- void MarlinUI::refresh_screen_timeout() {
- screen_timeout_millis = sleep_timeout_minutes ? millis() + sleep_timeout_minutes * 60UL * 1000UL : 0;
- sleep_display(false);
- }
- #endif
- #endif
-
- void MarlinUI::init() {
-
- init_lcd();
-
- #if HAS_DIGITAL_BUTTONS
- #if BUTTON_EXISTS(EN1)
- SET_INPUT_PULLUP(BTN_EN1);
- #endif
- #if BUTTON_EXISTS(EN2)
- SET_INPUT_PULLUP(BTN_EN2);
- #endif
- #if BUTTON_EXISTS(ENC)
- SET_INPUT_PULLUP(BTN_ENC);
- #endif
- #if BUTTON_EXISTS(ENC_EN)
- SET_INPUT_PULLUP(BTN_ENC_EN);
- #endif
- #if BUTTON_EXISTS(BACK)
- SET_INPUT_PULLUP(BTN_BACK);
- #endif
- #if BUTTON_EXISTS(UP)
- SET_INPUT(BTN_UP);
- #endif
- #if BUTTON_EXISTS(DOWN)
- SET_INPUT(BTN_DOWN);
- #endif
- #if BUTTON_EXISTS(LFT)
- SET_INPUT(BTN_LEFT);
- #endif
- #if BUTTON_EXISTS(RT)
- SET_INPUT(BTN_RIGHT);
- #endif
- #endif
-
- #if HAS_SHIFT_ENCODER
-
- #if ENABLED(SR_LCD_2W_NL) // Non latching 2 wire shift register
-
- SET_OUTPUT(SR_DATA_PIN);
- SET_OUTPUT(SR_CLK_PIN);
-
- #elif PIN_EXISTS(SHIFT_CLK)
-
- SET_OUTPUT(SHIFT_CLK_PIN);
- OUT_WRITE(SHIFT_LD_PIN, HIGH);
- #if PIN_EXISTS(SHIFT_EN)
- OUT_WRITE(SHIFT_EN_PIN, LOW);
- #endif
- SET_INPUT_PULLUP(SHIFT_OUT_PIN);
-
- #endif
-
- #endif // HAS_SHIFT_ENCODER
-
- #if BOTH(HAS_ENCODER_ACTION, HAS_SLOW_BUTTONS)
- slow_buttons = 0;
- #endif
-
- update_buttons();
-
- TERN_(HAS_ENCODER_ACTION, encoderDiff = 0);
-
- reset_status(); // Set welcome message
- }
-
- #if HAS_WIRED_LCD
-
- #if HAS_MARLINUI_U8GLIB
- #include "dogm/marlinui_DOGM.h"
- #endif
-
- #include "lcdprint.h"
-
- #include "../module/temperature.h"
- #include "../module/planner.h"
- #include "../module/motion.h"
-
- #if HAS_MARLINUI_MENU
- #include "../module/settings.h"
- #endif
-
- #if ENABLED(AUTO_BED_LEVELING_UBL)
- #include "../feature/bedlevel/bedlevel.h"
- #endif
-
- #if HAS_TRINAMIC_CONFIG
- #include "../feature/tmc_util.h"
- #endif
-
- #if HAS_ADC_BUTTONS
- #include "../module/thermistor/thermistors.h"
- #endif
-
- #if HAS_POWER_MONITOR
- #include "../feature/power_monitor.h"
- #endif
-
- #if LED_POWEROFF_TIMEOUT > 0
- #include "../feature/power.h"
- #endif
-
- #if HAS_ENCODER_ACTION
- volatile uint8_t MarlinUI::buttons;
- #if HAS_SLOW_BUTTONS
- volatile uint8_t MarlinUI::slow_buttons;
- #endif
- #if HAS_TOUCH_BUTTONS
- #include "touch/touch_buttons.h"
- bool MarlinUI::on_edit_screen = false;
- #endif
- #endif
-
- #if HAS_SCREEN_TIMEOUT
- bool MarlinUI::defer_return_to_status;
- millis_t MarlinUI::return_to_status_ms = 0;
- #endif
-
- uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed
-
- #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
- millis_t MarlinUI::next_filament_display; // = 0
- #endif
-
- millis_t MarlinUI::next_button_update_ms; // = 0
-
- #if HAS_MARLINUI_U8GLIB
- bool MarlinUI::drawing_screen, MarlinUI::first_page; // = false
- #endif
-
- #if IS_DWIN_MARLINUI
- bool MarlinUI::did_first_redraw;
- bool MarlinUI::old_is_printing;
- #endif
-
- #if ENABLED(SDSUPPORT)
-
- #if MARLINUI_SCROLL_NAME
- uint8_t MarlinUI::filename_scroll_pos, MarlinUI::filename_scroll_max;
- #endif
-
- const char * MarlinUI::scrolled_filename(CardReader &theCard, const uint8_t maxlen, uint8_t hash, const bool doScroll) {
- const char *outstr = theCard.longest_filename();
- if (theCard.longFilename[0]) {
- #if MARLINUI_SCROLL_NAME
- if (doScroll) {
- for (uint8_t l = FILENAME_LENGTH; l--;)
- hash = ((hash << 1) | (hash >> 7)) ^ theCard.filename[l]; // rotate, xor
- static uint8_t filename_scroll_hash;
- if (filename_scroll_hash != hash) { // If the hash changed...
- filename_scroll_hash = hash; // Save the new hash
- filename_scroll_max = _MAX(0, utf8_strlen(theCard.longFilename) - maxlen); // Update the scroll limit
- filename_scroll_pos = 0; // Reset scroll to the start
- lcd_status_update_delay = 8; // Don't scroll right away
- }
- // Advance byte position corresponding to filename_scroll_pos char position
- outstr += TERN(UTF_FILENAME_SUPPORT, utf8_byte_pos_by_char_num(outstr, filename_scroll_pos), filename_scroll_pos);
- }
- #else
- theCard.longFilename[
- TERN(UTF_FILENAME_SUPPORT, utf8_byte_pos_by_char_num(theCard.longFilename, maxlen), maxlen)
- ] = '\0'; // cutoff at screen edge
- #endif
- }
- return outstr;
- }
-
- #endif
-
- #if HAS_MARLINUI_MENU
- #include "menu/menu.h"
-
- screenFunc_t MarlinUI::currentScreen; // Initialized in CTOR
- bool MarlinUI::screen_changed;
-
- #if ENABLED(ENCODER_RATE_MULTIPLIER)
- bool MarlinUI::encoderRateMultiplierEnabled;
- millis_t MarlinUI::lastEncoderMovementMillis = 0;
- void MarlinUI::enable_encoder_multiplier(const bool onoff) {
- encoderRateMultiplierEnabled = onoff;
- lastEncoderMovementMillis = 0;
- }
- #endif
-
- #if EITHER(REVERSE_MENU_DIRECTION, REVERSE_SELECT_DIRECTION)
- int8_t MarlinUI::encoderDirection = ENCODERBASE;
- #endif
-
- #if HAS_TOUCH_BUTTONS
- uint8_t MarlinUI::touch_buttons;
- uint8_t MarlinUI::repeat_delay;
- #endif
-
- #if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
-
- bool MarlinUI::external_control; // = false
-
- void MarlinUI::wait_for_release() {
- while (button_pressed()) safe_delay(50);
- safe_delay(50);
- }
-
- #endif
-
- #if !HAS_GRAPHICAL_TFT
-
- void _wrap_string(uint8_t &col, uint8_t &row, const char * const string, read_byte_cb_t cb_read_byte, bool wordwrap/*=false*/) {
- SETCURSOR(col, row);
- if (!string) return;
-
- auto _newline = [&col, &row]{
- col = 0; row++; // Move col to string len (plus space)
- SETCURSOR(0, row); // Simulate carriage return
- };
-
- const uint8_t *p = (uint8_t*)string;
- lchar_t wc;
- if (wordwrap) {
- const uint8_t *wrd = nullptr;
- uint8_t c = 0;
- // find the end of the part
- for (;;) {
- if (!wrd) wrd = p; // Get word start /before/ advancing
- p = get_utf8_value_cb(p, cb_read_byte, wc);
- const bool eol = !wc; // zero ends the string
- // End or a break between phrases?
- if (eol || wc == ' ' || wc == '-' || wc == '+' || wc == '.') {
- if (!c && wc == ' ') { if (wrd) wrd++; continue; } // collapse extra spaces
- // Past the right and the word is not too long?
- if (col + c > LCD_WIDTH && col >= (LCD_WIDTH) / 4) _newline(); // should it wrap?
- c += !eol; // +1 so the space will be printed
- col += c; // advance col to new position
- while (c) { // character countdown
- --c; // count down to zero
- wrd = get_utf8_value_cb(wrd, cb_read_byte, wc); // get characters again
- lcd_put_lchar(wc); // character to the LCD
- }
- if (eol) break; // all done!
- wrd = nullptr; // set up for next word
- }
- else c++; // count word characters
- }
- }
- else {
- for (;;) {
- p = get_utf8_value_cb(p, cb_read_byte, wc);
- if (!wc) break;
- lcd_put_lchar(wc);
- col++;
- if (col >= LCD_WIDTH) _newline();
- }
- }
- }
-
- void MarlinUI::draw_select_screen_prompt(FSTR_P const pref, const char * const string/*=nullptr*/, FSTR_P const suff/*=nullptr*/) {
- const uint8_t plen = utf8_strlen(pref), slen = suff ? utf8_strlen(suff) : 0;
- uint8_t col = 0, row = 0;
- if (!string && plen + slen <= LCD_WIDTH) {
- col = (LCD_WIDTH - plen - slen) / 2;
- row = LCD_HEIGHT > 3 ? 1 : 0;
- }
- if (LCD_HEIGHT >= 8) row = LCD_HEIGHT / 2 - 2;
- wrap_string_P(col, row, FTOP(pref), true);
- if (string) {
- if (col) { col = 0; row++; } // Move to the start of the next line
- wrap_string(col, row, string);
- }
- if (suff) wrap_string_P(col, row, FTOP(suff));
- }
-
- #endif // !HAS_GRAPHICAL_TFT
-
- #endif // HAS_MARLINUI_MENU
-
- ////////////////////////////////////////////
- ///////////// Keypad Handling //////////////
- ////////////////////////////////////////////
-
- #if IS_RRW_KEYPAD && HAS_ENCODER_ACTION
-
- volatile uint8_t MarlinUI::keypad_buttons;
-
- #if HAS_MARLINUI_MENU && !HAS_ADC_BUTTONS
-
- void _reprapworld_keypad_move(const AxisEnum axis, const int16_t dir) {
- ui.manual_move.menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
- ui.encoderPosition = dir;
- switch (axis) {
- case X_AXIS:
- TERN_(HAS_Y_AXIS, case Y_AXIS:)
- TERN_(HAS_Z_AXIS, case Z_AXIS:)
- lcd_move_axis(axis);
- default: break;
- }
- }
-
- #endif
-
- bool MarlinUI::handle_keypad() {
-
- #if HAS_ADC_BUTTONS
-
- #define ADC_MIN_KEY_DELAY 100
- if (keypad_buttons) {
- #if HAS_ENCODER_ACTION
- refresh(LCDVIEW_REDRAW_NOW);
- #if HAS_MARLINUI_MENU
- if (encoderDirection == -(ENCODERBASE)) { // HAS_ADC_BUTTONS forces REVERSE_MENU_DIRECTION, so this indicates menu navigation
- if (RRK(EN_KEYPAD_UP)) encoderPosition += ENCODER_STEPS_PER_MENU_ITEM;
- else if (RRK(EN_KEYPAD_DOWN)) encoderPosition -= ENCODER_STEPS_PER_MENU_ITEM;
- else if (RRK(EN_KEYPAD_LEFT)) { MenuItem_back::action(); quick_feedback(); }
- else if (RRK(EN_KEYPAD_RIGHT)) { return_to_status(); quick_feedback(); }
- }
- else
- #endif
- {
- #if HAS_MARLINUI_MENU
- if (RRK(EN_KEYPAD_UP)) encoderPosition -= epps;
- else if (RRK(EN_KEYPAD_DOWN)) encoderPosition += epps;
- else if (RRK(EN_KEYPAD_LEFT)) { MenuItem_back::action(); quick_feedback(); }
- else if (RRK(EN_KEYPAD_RIGHT)) encoderPosition = 0;
- #else
- if (RRK(EN_KEYPAD_UP) || RRK(EN_KEYPAD_LEFT)) encoderPosition -= epps;
- else if (RRK(EN_KEYPAD_DOWN) || RRK(EN_KEYPAD_RIGHT)) encoderPosition += epps;
- #endif
- }
- #endif
- next_button_update_ms = millis() + ADC_MIN_KEY_DELAY;
- return true;
- }
-
- #else // !HAS_ADC_BUTTONS
-
- static uint8_t keypad_debounce = 0;
-
- if (!RRK( EN_KEYPAD_F1 | EN_KEYPAD_F2
- | EN_KEYPAD_F3 | EN_KEYPAD_DOWN
- | EN_KEYPAD_RIGHT | EN_KEYPAD_MIDDLE
- | EN_KEYPAD_UP | EN_KEYPAD_LEFT )
- ) {
- if (keypad_debounce > 0) keypad_debounce--;
- }
- else if (!keypad_debounce) {
- keypad_debounce = 2;
-
- const bool homed = all_axes_homed();
-
- #if HAS_MARLINUI_MENU
-
- if (RRK(EN_KEYPAD_MIDDLE)) goto_screen(menu_move);
-
- #if NONE(DELTA, Z_HOME_TO_MAX)
- if (RRK(EN_KEYPAD_F2)) _reprapworld_keypad_move(Z_AXIS, 1);
- #endif
-
- if (homed) {
- #if EITHER(DELTA, Z_HOME_TO_MAX)
- if (RRK(EN_KEYPAD_F2)) _reprapworld_keypad_move(Z_AXIS, 1);
- #endif
- if (RRK(EN_KEYPAD_F3)) _reprapworld_keypad_move(Z_AXIS, -1);
- if (RRK(EN_KEYPAD_LEFT)) _reprapworld_keypad_move(X_AXIS, -1);
- if (RRK(EN_KEYPAD_RIGHT)) _reprapworld_keypad_move(X_AXIS, 1);
- if (RRK(EN_KEYPAD_DOWN)) _reprapworld_keypad_move(Y_AXIS, 1);
- if (RRK(EN_KEYPAD_UP)) _reprapworld_keypad_move(Y_AXIS, -1);
- }
-
- #endif // HAS_MARLINUI_MENU
-
- if (!homed && RRK(EN_KEYPAD_F1)) queue.inject_P(G28_STR);
- return true;
- }
-
- #endif // !HAS_ADC_BUTTONS
-
- return false;
- }
-
- #endif // IS_RRW_KEYPAD && HAS_ENCODER_ACTION
-
- /**
- * Status Screen
- *
- * This is very display-dependent, so the lcd implementation draws this.
- */
-
- #if BASIC_PROGRESS_BAR
- millis_t MarlinUI::progress_bar_ms; // = 0
- #if PROGRESS_MSG_EXPIRE > 0
- millis_t MarlinUI::expire_status_ms; // = 0
- #endif
- #endif
-
- void MarlinUI::status_screen() {
-
- TERN_(HAS_MARLINUI_MENU, ENCODER_RATE_MULTIPLY(false));
-
- #if BASIC_PROGRESS_BAR
-
- //
- // HD44780 implements the following message blinking and
- // message expiration because Status Line and Progress Bar
- // share the same line on the display.
- //
-
- #if DISABLED(PROGRESS_MSG_ONCE) || PROGRESS_MSG_EXPIRE > 0
- #define GOT_MS
- const millis_t ms = millis();
- #endif
-
- // If the message will blink rather than expire...
- #if DISABLED(PROGRESS_MSG_ONCE)
- if (ELAPSED(ms, progress_bar_ms + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME))
- progress_bar_ms = ms;
- #endif
-
- #if PROGRESS_MSG_EXPIRE > 0
-
- // Handle message expire
- if (expire_status_ms) {
-
- // Expire the message if a job is active and the bar has ticks
- if (get_progress_percent() > 2 && !print_job_timer.isPaused()) {
- if (ELAPSED(ms, expire_status_ms)) {
- status_message[0] = '\0';
- expire_status_ms = 0;
- }
- }
- else {
- // Defer message expiration before bar appears
- // and during any pause (not just SD)
- expire_status_ms += LCD_UPDATE_INTERVAL;
- }
- }
-
- #endif // PROGRESS_MSG_EXPIRE
-
- #endif // BASIC_PROGRESS_BAR
-
- bool did_expire = status_reset_callback && (*status_reset_callback)();
-
- #if HAS_STATUS_MESSAGE_TIMEOUT
- #ifndef GOT_MS
- #define GOT_MS
- const millis_t ms = millis();
- #endif
- did_expire |= status_message_expire_ms && ELAPSED(ms, status_message_expire_ms);
- #endif
-
- if (did_expire) reset_status();
-
- #if HAS_MARLINUI_MENU
- if (use_click()) {
- #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
- next_filament_display = millis() + 5000UL; // Show status message for 5s
- #endif
- goto_screen(menu_main);
- reinit_lcd(); // Revive a noisy shared SPI LCD
- return;
- }
-
- #endif
-
- #if ENABLED(ULTIPANEL_FEEDMULTIPLY)
-
- const int16_t old_frm = feedrate_percentage;
- int16_t new_frm = old_frm + int16_t(encoderPosition);
-
- // Dead zone at 100% feedrate
- if (old_frm == 100) {
- if (int16_t(encoderPosition) > ENCODER_FEEDRATE_DEADZONE)
- new_frm -= ENCODER_FEEDRATE_DEADZONE;
- else if (int16_t(encoderPosition) < -(ENCODER_FEEDRATE_DEADZONE))
- new_frm += ENCODER_FEEDRATE_DEADZONE;
- else
- new_frm = old_frm;
- }
- else if ((old_frm < 100 && new_frm > 100) || (old_frm > 100 && new_frm < 100))
- new_frm = 100;
-
- LIMIT(new_frm, 10, 999);
-
- if (old_frm != new_frm) {
- feedrate_percentage = new_frm;
- encoderPosition = 0;
- #if BOTH(HAS_SOUND, BEEP_ON_FEEDRATE_CHANGE)
- static millis_t next_beep;
- #ifndef GOT_MS
- const millis_t ms = millis();
- #endif
- if (ELAPSED(ms, next_beep)) {
- BUZZ(FEEDRATE_CHANGE_BEEP_DURATION, FEEDRATE_CHANGE_BEEP_FREQUENCY);
- next_beep = ms + 500UL;
- }
- #endif
- }
-
- #endif // ULTIPANEL_FEEDMULTIPLY
-
- draw_status_screen();
- }
-
- void MarlinUI::kill_screen(FSTR_P const lcd_error, FSTR_P const lcd_component) {
- init();
- status_printf(1, F(S_FMT ": " S_FMT), FTOP(lcd_error), FTOP(lcd_component));
- TERN_(HAS_MARLINUI_MENU, return_to_status());
-
- // RED ALERT. RED ALERT.
- #if ENABLED(PRINTER_EVENT_LEDS)
- leds.set_color(LEDColorRed());
- #ifdef NEOPIXEL_BKGD_INDEX_FIRST
- neo.set_background_color(255, 0, 0, 0);
- neo.show();
- #endif
- #endif
-
- draw_kill_screen();
- }
-
- #if HAS_TOUCH_SLEEP
- #if HAS_TOUCH_BUTTONS
- #include "touch/touch_buttons.h"
- #else
- #include "tft/touch.h"
- #endif
- // Wake up a sleeping TFT
- void MarlinUI::wakeup_screen() {
- TERN(HAS_TOUCH_BUTTONS, touchBt.wakeUp(), touch.wakeUp());
- }
- #endif
-
- void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
- TERN_(HAS_TOUCH_SLEEP, wakeup_screen()); // Wake up the TFT with most buttons
- TERN_(HAS_MARLINUI_MENU, refresh());
-
- #if HAS_ENCODER_ACTION
- if (clear_buttons)
- TERN_(HAS_ADC_BUTTONS, keypad_buttons =) buttons = 0;
- next_button_update_ms = millis() + 500;
- #else
- UNUSED(clear_buttons);
- #endif
-
- chirp(); // Buzz and wait. Is the delay needed for buttons to settle?
-
- #if HAS_CHIRP && HAS_MARLINUI_MENU
- #if HAS_BEEPER
- for (int8_t i = 5; i--;) { buzzer.tick(); delay(2); }
- #else
- delay(10);
- #endif
- #endif
- }
-
- ////////////////////////////////////////////
- /////////////// Manual Move ////////////////
- ////////////////////////////////////////////
-
- #if HAS_MARLINUI_MENU
-
- ManualMove MarlinUI::manual_move{};
-
- millis_t ManualMove::start_time = 0;
- float ManualMove::menu_scale = 1;
- screenFunc_t ManualMove::screen_ptr;
- #if IS_KINEMATIC
- float ManualMove::offset = 0;
- xyze_pos_t ManualMove::all_axes_destination = { 0 };
- bool ManualMove::processing = false;
- #endif
- #if MULTI_E_MANUAL
- int8_t ManualMove::e_index = 0;
- #endif
- AxisEnum ManualMove::axis = NO_AXIS_ENUM;
- #if ENABLED(MANUAL_E_MOVES_RELATIVE)
- float ManualMove::e_origin = 0;
- #endif
-
- /**
- * If a manual move has been posted and its time has arrived, and if the planner
- * has a space for it, then add a linear move to current_position the planner.
- *
- * If any manual move needs to be interrupted, make sure to force a manual move
- * by setting manual_move.start_time to millis() after updating current_position.
- *
- * To post a manual move:
- * - Update current_position to the new place you want to go.
- * - Set manual_move.axis to an axis like X_AXIS. Use ALL_AXES_ENUM for diagonal moves.
- * - Set manual_move.start_time to a point in the future (in ms) when the move should be done.
- *
- * For kinematic machines:
- * - Set manual_move.offset to modify one axis and post the move.
- * This is used to achieve more rapid stepping on kinematic machines.
- */
- void ManualMove::task() {
-
- if (processing) return; // Prevent re-entry from idle() calls
-
- // Add a manual move to the queue?
- if (axis != NO_AXIS_ENUM && ELAPSED(millis(), start_time) && !planner.is_full()) {
-
- const feedRate_t fr_mm_s = (axis < LOGICAL_AXES) ? manual_feedrate_mm_s[axis] : XY_PROBE_FEEDRATE_MM_S;
-
- #if IS_KINEMATIC
-
- #if HAS_MULTI_EXTRUDER
- REMEMBER(ae, active_extruder);
- #if MULTI_E_MANUAL
- if (axis == E_AXIS) active_extruder = e_index;
- #endif
- #endif
-
- // Apply a linear offset to a single axis
- if (axis == ALL_AXES_ENUM)
- destination = all_axes_destination;
- else if (axis <= XYZE) {
- destination = current_position;
- destination[axis] += offset;
- }
-
- // Reset for the next move
- offset = 0;
- axis = NO_AXIS_ENUM;
-
- // DELTA and SCARA machines use segmented moves, which could fill the planner during the call to
- // move_to_destination. This will cause idle() to be called, which can then call this function while the
- // previous invocation is being blocked. Modifications to offset shouldn't be made while
- // processing is true or the planner will get out of sync.
- processing = true;
- prepare_internal_move_to_destination(fr_mm_s); // will set current_position from destination
- processing = false;
-
- #else
-
- // For Cartesian / Core motion simply move to the current_position
- planner.buffer_line(current_position, fr_mm_s,
- TERN_(MULTI_E_MANUAL, axis == E_AXIS ? e_index :) active_extruder
- );
-
- //SERIAL_ECHOLNPGM("Add planner.move with Axis ", AS_CHAR(AXIS_CHAR(axis)), " at FR ", fr_mm_s);
-
- axis = NO_AXIS_ENUM;
-
- #endif
- }
- }
-
- //
- // Tell ui.update() to start a move to current_position after a short delay.
- //
- void ManualMove::soon(const AxisEnum move_axis
- OPTARG(MULTI_E_MANUAL, const int8_t eindex/*=active_extruder*/)
- ) {
- TERN_(MULTI_E_MANUAL, if (move_axis == E_AXIS) e_index = eindex);
- start_time = millis() + (menu_scale < 0.99f ? 0UL : 250UL); // delay for bigger moves
- axis = move_axis;
- //SERIAL_ECHOLNPGM("Post Move with Axis ", AS_CHAR(AXIS_CHAR(axis)), " soon.");
- }
-
- #if ENABLED(AUTO_BED_LEVELING_UBL)
-
- void MarlinUI::external_encoder() {
- if (external_control && encoderDiff) {
- bedlevel.encoder_diff += encoderDiff; // Encoder for UBL G29 mesh editing
- encoderDiff = 0; // Hide encoder events from the screen handler
- refresh(LCDVIEW_REDRAW_NOW); // ...but keep the refresh.
- }
- }
-
- #endif
-
- #endif // HAS_MARLINUI_MENU
-
- /**
- * Update the LCD, read encoder buttons, etc.
- * - Read button states
- * - Check the SD Card slot state
- * - Act on RepRap World keypad input
- * - Update the encoder position
- * - Apply acceleration to the encoder position
- * - Do refresh(LCDVIEW_CALL_REDRAW_NOW) on controller events
- * - Reset the Info Screen timeout if there's any input
- * - Update status indicators, if any
- *
- * Run the current LCD menu handler callback function:
- * - Call the handler only if lcdDrawUpdate != LCDVIEW_NONE
- * - Before calling the handler, LCDVIEW_CALL_NO_REDRAW => LCDVIEW_NONE
- * - Call the menu handler. Menu handlers should do the following:
- * - If a value changes, set lcdDrawUpdate to LCDVIEW_REDRAW_NOW and draw the value
- * (Encoder events automatically set lcdDrawUpdate for you.)
- * - if (should_draw()) { redraw }
- * - Before exiting the handler set lcdDrawUpdate to:
- * - LCDVIEW_CLEAR_CALL_REDRAW to clear screen and set LCDVIEW_CALL_REDRAW_NEXT.
- * - LCDVIEW_REDRAW_NOW to draw now (including remaining stripes).
- * - LCDVIEW_CALL_REDRAW_NEXT to draw now and get LCDVIEW_REDRAW_NOW on the next loop.
- * - LCDVIEW_CALL_NO_REDRAW to draw now and get LCDVIEW_NONE on the next loop.
- * - NOTE: For graphical displays menu handlers may be called 2 or more times per loop,
- * so don't change lcdDrawUpdate without considering this.
- *
- * After the menu handler callback runs (or not):
- * - Clear the LCD if lcdDrawUpdate == LCDVIEW_CLEAR_CALL_REDRAW
- * - Update lcdDrawUpdate for the next loop (i.e., move one state down, usually)
- *
- * This function is only called from the main thread.
- */
-
- LCDViewAction MarlinUI::lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW;
- millis_t next_lcd_update_ms;
-
- inline bool can_encode() {
- return !BUTTON_PRESSED(ENC_EN); // Update encoder only when ENC_EN is not LOW (pressed)
- }
-
- void MarlinUI::update() {
-
- static uint16_t max_display_update_time = 0;
- millis_t ms = millis();
-
- #if LED_POWEROFF_TIMEOUT > 0
- leds.update_timeout(powerManager.psu_on);
- #endif
-
- #if HAS_MARLINUI_MENU
-
- // Handle any queued Move Axis motion
- manual_move.task();
-
- // Update button states for button_pressed(), etc.
- // If the state changes the next update may be delayed 300-500ms.
- update_buttons();
-
- // If the action button is pressed...
- static bool wait_for_unclick; // = false
-
- auto do_click = [&]{
- wait_for_unclick = true; // - Set debounce flag to ignore continuous clicks
- lcd_clicked = !wait_for_user; // - Keep the click if not waiting for a user-click
- wait_for_user = false; // - Any click clears wait for user
- quick_feedback(); // - Always make a click sound
- };
-
- #if HAS_TOUCH_BUTTONS
- if (touch_buttons) {
- reset_status_timeout(ms);
- if (touch_buttons & (EN_A | EN_B)) { // Menu arrows, in priority
- if (ELAPSED(ms, next_button_update_ms)) {
- encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * epps * encoderDirection;
- if (touch_buttons & EN_A) encoderDiff *= -1;
- TERN_(AUTO_BED_LEVELING_UBL, external_encoder());
- next_button_update_ms = ms + repeat_delay; // Assume the repeat delay
- if (!wait_for_unclick) {
- next_button_update_ms += 250; // Longer delay on first press
- wait_for_unclick = true; // Avoid Back/Select click while repeating
- chirp();
- }
- }
- }
- else if (!wait_for_unclick && (buttons & EN_C)) // OK button, if not waiting for a debounce release:
- do_click();
- }
- // keep wait_for_unclick value
- #endif
-
- if (!touch_buttons) {
- // Integrated LCD click handling via button_pressed
- if (!external_control && button_pressed()) {
- if (!wait_for_unclick) do_click(); // Handle the click
- }
- else
- wait_for_unclick = false;
- }
-
- if (LCD_BACK_CLICKED()) {
- quick_feedback();
- goto_previous_screen();
- }
-
- #endif // HAS_MARLINUI_MENU
-
- if (ELAPSED(ms, next_lcd_update_ms) || TERN0(HAS_MARLINUI_U8GLIB, drawing_screen)) {
-
- next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL;
-
- #if HAS_TOUCH_BUTTONS
-
- if (on_status_screen()) next_lcd_update_ms += (LCD_UPDATE_INTERVAL) * 2;
-
- TERN_(HAS_ENCODER_ACTION, touch_buttons = touchBt.read_buttons());
-
- #endif
-
- TERN_(LCD_HAS_STATUS_INDICATORS, update_indicators());
-
- #if HAS_ENCODER_ACTION
-
- TERN_(HAS_SLOW_BUTTONS, slow_buttons = read_slow_buttons()); // Buttons that take too long to read in interrupt context
-
- if (TERN0(IS_RRW_KEYPAD, handle_keypad()))
- reset_status_timeout(ms);
-
- uint8_t abs_diff = ABS(encoderDiff);
-
- #if ENCODER_PULSES_PER_STEP > 1
- // When reversing the encoder direction, a movement step can be missed because
- // encoderDiff has a non-zero residual value, making the controller unresponsive.
- // The fix clears the residual value when the encoder is idle.
- // Also check if past half the threshold to compensate for missed single steps.
- static int8_t lastEncoderDiff;
-
- // Timeout? No decoder change since last check. 10 or 20 times per second.
- if (encoderDiff == lastEncoderDiff && abs_diff <= epps / 2) // Same direction & size but not over a half-step?
- encoderDiff = 0; // Clear residual pulses.
- else if (WITHIN(abs_diff, epps / 2 + 1, epps - 1)) { // Past half of threshold?
- abs_diff = epps; // Treat as a full step size
- encoderDiff = (encoderDiff < 0 ? -1 : 1) * abs_diff; // ...in the spin direction.
- }
- TERN_(HAS_TOUCH_SLEEP, if (lastEncoderDiff != encoderDiff) wakeup_screen());
- lastEncoderDiff = encoderDiff;
- #endif
-
- const bool encoderPastThreshold = (abs_diff >= epps);
- if (encoderPastThreshold || lcd_clicked) {
- if (encoderPastThreshold && TERN1(IS_TFTGLCD_PANEL, !external_control)) {
-
- #if BOTH(HAS_MARLINUI_MENU, ENCODER_RATE_MULTIPLIER)
-
- int32_t encoderMultiplier = 1;
-
- if (encoderRateMultiplierEnabled) {
- const float encoderMovementSteps = float(abs_diff) / epps;
-
- if (lastEncoderMovementMillis) {
- // Note that the rate is always calculated between two passes through the
- // loop and that the abs of the encoderDiff value is tracked.
- const float encoderStepRate = encoderMovementSteps / float(ms - lastEncoderMovementMillis) * 1000;
-
- if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
- else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
-
- // Enable to output the encoder steps per second value
- //#define ENCODER_RATE_MULTIPLIER_DEBUG
- #if ENABLED(ENCODER_RATE_MULTIPLIER_DEBUG)
- SERIAL_ECHO_START();
- SERIAL_ECHOPGM("Enc Step Rate: ", encoderStepRate);
- SERIAL_ECHOPGM(" Multiplier: ", encoderMultiplier);
- SERIAL_ECHOPGM(" ENCODER_10X_STEPS_PER_SEC: ", ENCODER_10X_STEPS_PER_SEC);
- SERIAL_ECHOPGM(" ENCODER_100X_STEPS_PER_SEC: ", ENCODER_100X_STEPS_PER_SEC);
- SERIAL_EOL();
- #endif
- }
-
- lastEncoderMovementMillis = ms;
- } // encoderRateMultiplierEnabled
-
- #else
-
- constexpr int32_t encoderMultiplier = 1;
-
- #endif // ENCODER_RATE_MULTIPLIER
-
- if (can_encode()) encoderPosition += (encoderDiff * encoderMultiplier) / epps;
-
- encoderDiff = 0;
- }
-
- reset_status_timeout(ms);
-
- #if LCD_BACKLIGHT_TIMEOUT_MINS
- refresh_backlight_timeout();
- #elif HAS_DISPLAY_SLEEP && DISABLED(TFT_COLOR_UI)
- refresh_screen_timeout();
- #endif
-
- refresh(LCDVIEW_REDRAW_NOW);
-
- #if LED_POWEROFF_TIMEOUT > 0
- if (!powerManager.psu_on) leds.reset_timeout(ms);
- #endif
- } // encoder activity
-
- #endif // HAS_ENCODER_ACTION
-
- // This runs every ~100ms when idling often enough.
- // Instead of tracking changes just redraw the Status Screen once per second.
- if (on_status_screen() && !lcd_status_update_delay--) {
- lcd_status_update_delay = TERN(HAS_MARLINUI_U8GLIB, 12, 9);
- if (max_display_update_time) max_display_update_time--; // Be sure never go to a very big number
- refresh(LCDVIEW_REDRAW_NOW);
- }
-
- #if BOTH(HAS_MARLINUI_MENU, SCROLL_LONG_FILENAMES)
- // If scrolling of long file names is enabled and we are in the sd card menu,
- // cause a refresh to occur until all the text has scrolled into view.
- if (currentScreen == menu_media && !lcd_status_update_delay--) {
- lcd_status_update_delay = ++filename_scroll_pos >= filename_scroll_max ? 12 : 4; // Long delay at end and start
- if (filename_scroll_pos > filename_scroll_max) filename_scroll_pos = 0;
- refresh(LCDVIEW_REDRAW_NOW);
- reset_status_timeout(ms);
- }
- #endif
-
- // Then we want to use only 50% of the time
- const uint16_t bbr2 = planner.block_buffer_runtime() >> 1;
-
- if ((should_draw() || drawing_screen) && (!bbr2 || bbr2 > max_display_update_time)) {
-
- // Change state of drawing flag between screen updates
- if (!drawing_screen) switch (lcdDrawUpdate) {
- case LCDVIEW_CALL_NO_REDRAW:
- refresh(LCDVIEW_NONE);
- break;
- case LCDVIEW_CLEAR_CALL_REDRAW:
- case LCDVIEW_CALL_REDRAW_NEXT:
- refresh(LCDVIEW_REDRAW_NOW);
- case LCDVIEW_REDRAW_NOW: // set above, or by a handler through LCDVIEW_CALL_REDRAW_NEXT
- case LCDVIEW_NONE:
- break;
- } // switch
-
- TERN_(HAS_ADC_BUTTONS, keypad_buttons = 0);
-
- #if HAS_MARLINUI_U8GLIB
-
- #if ENABLED(LIGHTWEIGHT_UI)
- const bool in_status = on_status_screen(),
- do_u8g_loop = !in_status;
- lcd_in_status(in_status);
- if (in_status) status_screen();
- #else
- constexpr bool do_u8g_loop = true;
- #endif
-
- if (do_u8g_loop) {
- if (!drawing_screen) { // If not already drawing pages
- u8g.firstPage(); // Start the first page
- drawing_screen = first_page = true; // Flag as drawing pages
- }
- set_font(FONT_MENU); // Setup font for every page draw
- u8g.setColorIndex(1); // And reset the color
- run_current_screen(); // Draw and process the current screen
- first_page = false;
-
- // The screen handler can clear drawing_screen for an action that changes the screen.
- // If still drawing and there's another page, update max-time and return now.
- // The nextPage will already be set up on the next call.
- if (drawing_screen && (drawing_screen = u8g.nextPage())) {
- if (on_status_screen())
- NOLESS(max_display_update_time, millis() - ms);
- return;
- }
- }
-
- #else
-
- run_current_screen();
-
- // Apply all DWIN drawing after processing
- TERN_(IS_DWIN_MARLINUI, DWIN_UpdateLCD());
-
- #endif
-
- TERN_(HAS_MARLINUI_MENU, lcd_clicked = false);
-
- // Keeping track of the longest time for an individual LCD update.
- // Used to do screen throttling when the planner starts to fill up.
- if (on_status_screen())
- NOLESS(max_display_update_time, millis() - ms);
- }
-
- #if HAS_SCREEN_TIMEOUT
- // Return to Status Screen after a timeout
- if (on_status_screen() || defer_return_to_status)
- reset_status_timeout(ms);
- else if (ELAPSED(ms, return_to_status_ms))
- return_to_status();
- #endif
-
- #if LCD_BACKLIGHT_TIMEOUT_MINS
- if (backlight_off_ms && ELAPSED(ms, backlight_off_ms)) {
- WRITE(LCD_BACKLIGHT_PIN, LOW); // Backlight off
- backlight_off_ms = 0;
- }
- #elif HAS_DISPLAY_SLEEP && DISABLED(TFT_COLOR_UI)
- if (screen_timeout_millis && ELAPSED(ms, screen_timeout_millis))
- sleep_display(true);
- #endif
-
- // Change state of drawing flag between screen updates
- if (!drawing_screen) switch (lcdDrawUpdate) {
- case LCDVIEW_CLEAR_CALL_REDRAW:
- clear_lcd(); break;
- case LCDVIEW_REDRAW_NOW:
- refresh(LCDVIEW_NONE);
- case LCDVIEW_NONE:
- case LCDVIEW_CALL_REDRAW_NEXT:
- case LCDVIEW_CALL_NO_REDRAW:
- default: break;
- } // switch
-
- } // ELAPSED(ms, next_lcd_update_ms)
-
- TERN_(HAS_GRAPHICAL_TFT, tft_idle());
- }
-
- #if HAS_ADC_BUTTONS
-
- typedef struct {
- raw_adc_t ADCKeyValueMin, ADCKeyValueMax;
- uint8_t ADCKeyNo;
- } _stADCKeypadTable_;
-
- #ifndef ADC_BUTTONS_VALUE_SCALE
- #define ADC_BUTTONS_VALUE_SCALE 1.0 // for the power voltage equal to the reference voltage
- #endif
- #ifndef ADC_BUTTONS_R_PULLUP
- #define ADC_BUTTONS_R_PULLUP 4.7 // common pull-up resistor in the voltage divider
- #endif
- #ifndef ADC_BUTTONS_LEFT_R_PULLDOWN
- #define ADC_BUTTONS_LEFT_R_PULLDOWN 0.47 // pull-down resistor for LEFT button voltage divider
- #endif
- #ifndef ADC_BUTTONS_RIGHT_R_PULLDOWN
- #define ADC_BUTTONS_RIGHT_R_PULLDOWN 4.7 // pull-down resistor for RIGHT button voltage divider
- #endif
- #ifndef ADC_BUTTONS_UP_R_PULLDOWN
- #define ADC_BUTTONS_UP_R_PULLDOWN 1.0 // pull-down resistor for UP button voltage divider
- #endif
- #ifndef ADC_BUTTONS_DOWN_R_PULLDOWN
- #define ADC_BUTTONS_DOWN_R_PULLDOWN 10.0 // pull-down resistor for DOWN button voltage divider
- #endif
- #ifndef ADC_BUTTONS_MIDDLE_R_PULLDOWN
- #define ADC_BUTTONS_MIDDLE_R_PULLDOWN 2.2 // pull-down resistor for MIDDLE button voltage divider
- #endif
-
- // Calculate the ADC value for the voltage divider with specified pull-down resistor value
- #define ADC_BUTTON_VALUE(r) raw_adc_t(HAL_ADC_RANGE * (ADC_BUTTONS_VALUE_SCALE) * r / (r + ADC_BUTTONS_R_PULLUP))
-
- static constexpr raw_adc_t adc_button_tolerance = HAL_ADC_RANGE * 25 / 1024,
- adc_other_button = raw_adc_t(uint32_t(HAL_ADC_RANGE * 1000UL) / 1024UL);
- static const _stADCKeypadTable_ stADCKeyTable[] PROGMEM = {
- // VALUE_MIN, VALUE_MAX, KEY
- { adc_other_button, HAL_ADC_RANGE, 1 + BLEN_KEYPAD_F1 }, // F1
- { adc_other_button, HAL_ADC_RANGE, 1 + BLEN_KEYPAD_F2 }, // F2
- { adc_other_button, HAL_ADC_RANGE, 1 + BLEN_KEYPAD_F3 }, // F3
- { ADC_BUTTON_VALUE(ADC_BUTTONS_LEFT_R_PULLDOWN) - adc_button_tolerance,
- ADC_BUTTON_VALUE(ADC_BUTTONS_LEFT_R_PULLDOWN) + adc_button_tolerance, 1 + BLEN_KEYPAD_LEFT }, // LEFT ( 272 ... 472)
- { ADC_BUTTON_VALUE(ADC_BUTTONS_RIGHT_R_PULLDOWN) - adc_button_tolerance,
- ADC_BUTTON_VALUE(ADC_BUTTONS_RIGHT_R_PULLDOWN) + adc_button_tolerance, 1 + BLEN_KEYPAD_RIGHT }, // RIGHT (1948 ... 2148)
- { ADC_BUTTON_VALUE(ADC_BUTTONS_UP_R_PULLDOWN) - adc_button_tolerance,
- ADC_BUTTON_VALUE(ADC_BUTTONS_UP_R_PULLDOWN) + adc_button_tolerance, 1 + BLEN_KEYPAD_UP }, // UP ( 618 ... 818)
- { ADC_BUTTON_VALUE(ADC_BUTTONS_DOWN_R_PULLDOWN) - adc_button_tolerance,
- ADC_BUTTON_VALUE(ADC_BUTTONS_DOWN_R_PULLDOWN) + adc_button_tolerance, 1 + BLEN_KEYPAD_DOWN }, // DOWN (2686 ... 2886)
- { ADC_BUTTON_VALUE(ADC_BUTTONS_MIDDLE_R_PULLDOWN) - adc_button_tolerance,
- ADC_BUTTON_VALUE(ADC_BUTTONS_MIDDLE_R_PULLDOWN) + adc_button_tolerance, 1 + BLEN_KEYPAD_MIDDLE }, // ENTER (1205 ... 1405)
- };
-
- uint8_t get_ADC_keyValue() {
- if (thermalManager.ADCKey_count >= 16) {
- const raw_adc_t currentkpADCValue = thermalManager.current_ADCKey_raw;
- thermalManager.current_ADCKey_raw = HAL_ADC_RANGE;
- thermalManager.ADCKey_count = 0;
- if (currentkpADCValue < adc_other_button)
- LOOP_L_N(i, ADC_KEY_NUM) {
- const raw_adc_t lo = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMin),
- hi = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMax);
- if (WITHIN(currentkpADCValue, lo, hi)) return pgm_read_byte(&stADCKeyTable[i].ADCKeyNo);
- }
- }
- return 0;
- }
-
- #endif // HAS_ADC_BUTTONS
-
- #if HAS_ENCODER_ACTION
-
- /**
- * Read encoder buttons from the hardware registers
- * Warning: This function is called from interrupt context!
- */
- void MarlinUI::update_buttons() {
- const millis_t now = millis();
- if (ELAPSED(now, next_button_update_ms)) {
-
- #if HAS_DIGITAL_BUTTONS
-
- #if ANY_BUTTON(EN1, EN2, ENC, BACK)
-
- uint8_t newbutton = 0;
- if (BUTTON_PRESSED(EN1)) newbutton |= EN_A;
- if (BUTTON_PRESSED(EN2)) newbutton |= EN_B;
- if (can_encode() && BUTTON_PRESSED(ENC)) newbutton |= EN_C;
- if (BUTTON_PRESSED(BACK)) newbutton |= EN_D;
-
- #else
-
- constexpr uint8_t newbutton = 0;
-
- #endif
-
- //
- // Directional buttons
- //
- #if ANY_BUTTON(UP, DOWN, LEFT, RIGHT)
-
- const int8_t pulses = epps * encoderDirection;
-
- if (BUTTON_PRESSED(UP)) {
- encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * pulses;
- next_button_update_ms = now + 300;
- }
- else if (BUTTON_PRESSED(DOWN)) {
- encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * pulses;
- next_button_update_ms = now + 300;
- }
- else if (BUTTON_PRESSED(LEFT)) {
- encoderDiff = -pulses;
- next_button_update_ms = now + 300;
- }
- else if (BUTTON_PRESSED(RIGHT)) {
- encoderDiff = pulses;
- next_button_update_ms = now + 300;
- }
-
- #endif // UP || DOWN || LEFT || RIGHT
-
- buttons = (newbutton | TERN0(HAS_SLOW_BUTTONS, slow_buttons)
- #if BOTH(HAS_TOUCH_BUTTONS, HAS_ENCODER_ACTION)
- | (touch_buttons & TERN(HAS_ENCODER_WHEEL, ~(EN_A | EN_B), 0xFF))
- #endif
- );
-
- #elif HAS_ADC_BUTTONS
-
- buttons = 0;
-
- #endif
-
- #if HAS_ADC_BUTTONS
- if (keypad_buttons == 0) {
- const uint8_t b = get_ADC_keyValue();
- if (WITHIN(b, 1, 8)) keypad_buttons = _BV(b - 1);
- }
- #endif
-
- #if HAS_SHIFT_ENCODER
- /**
- * Set up Rotary Encoder bit values (for two pin encoders to indicate movement).
- * These values are independent of which pins are used for EN_A / EN_B indications.
- * The rotary encoder part is also independent of the LCD chipset.
- */
- uint8_t val = 0;
- WRITE(SHIFT_LD_PIN, LOW);
- WRITE(SHIFT_LD_PIN, HIGH);
- LOOP_L_N(i, 8) {
- val >>= 1;
- if (READ(SHIFT_OUT_PIN)) SBI(val, 7);
- WRITE(SHIFT_CLK_PIN, HIGH);
- WRITE(SHIFT_CLK_PIN, LOW);
- }
- TERN(REPRAPWORLD_KEYPAD, keypad_buttons, buttons) = ~val;
- #endif
-
- #if IS_TFTGLCD_PANEL
- next_button_update_ms = now + (LCD_UPDATE_INTERVAL / 2);
- buttons = slow_buttons;
- TERN_(AUTO_BED_LEVELING_UBL, external_encoder());
- #endif
-
- } // next_button_update_ms
-
- #if HAS_ENCODER_WHEEL
- static uint8_t lastEncoderBits;
-
- // Manage encoder rotation
- #define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: encoderDiff += encoderDirection; break; case _E2: encoderDiff -= encoderDirection; }
-
- uint8_t enc = 0;
- if (buttons & EN_A) enc |= B01;
- if (buttons & EN_B) enc |= B10;
- if (enc != lastEncoderBits) {
- switch (enc) {
- case 0: ENCODER_SPIN(1, 2); break;
- case 2: ENCODER_SPIN(0, 3); break;
- case 3: ENCODER_SPIN(2, 1); break;
- case 1: ENCODER_SPIN(3, 0); break;
- }
- #if BOTH(HAS_MARLINUI_MENU, AUTO_BED_LEVELING_UBL)
- external_encoder();
- #endif
- lastEncoderBits = enc;
- }
-
- #endif // HAS_ENCODER_WHEEL
- }
-
- #endif // HAS_ENCODER_ACTION
-
- #endif // HAS_WIRED_LCD
-
- #if HAS_STATUS_MESSAGE
-
- ////////////////////////////////////////////
- ////////////// Status Message //////////////
- ////////////////////////////////////////////
-
- #if ENABLED(EXTENSIBLE_UI)
- #include "extui/ui_api.h"
- #endif
-
- bool MarlinUI::has_status() { return (status_message[0] != '\0'); }
-
- void MarlinUI::set_status(const char * const cstr, const bool persist) {
- if (alert_level) return;
-
- TERN_(HOST_STATUS_NOTIFICATIONS, hostui.notify(cstr));
-
- // Here we have a problem. The message is encoded in UTF8, so
- // arbitrarily cutting it will be a problem. We MUST be sure
- // that there is no cutting in the middle of a multibyte character!
-
- // Get a pointer to the null terminator
- const char* pend = cstr + strlen(cstr);
-
- // If length of supplied UTF8 string is greater than
- // our buffer size, start cutting whole UTF8 chars
- while ((pend - cstr) > MAX_MESSAGE_LENGTH) {
- --pend;
- while (!START_OF_UTF8_CHAR(*pend)) --pend;
- };
-
- // At this point, we have the proper cut point. Use it
- uint8_t maxLen = pend - cstr;
- strncpy(status_message, cstr, maxLen);
- status_message[maxLen] = '\0';
-
- finish_status(persist);
- }
-
- /**
- * Reset the status message
- */
-
- void MarlinUI::reset_status(const bool no_welcome) {
- #if SERVICE_INTERVAL_1 > 0
- static PGMSTR(service1, "> " SERVICE_NAME_1 "!");
- #endif
- #if SERVICE_INTERVAL_2 > 0
- static PGMSTR(service2, "> " SERVICE_NAME_2 "!");
- #endif
- #if SERVICE_INTERVAL_3 > 0
- static PGMSTR(service3, "> " SERVICE_NAME_3 "!");
- #endif
-
- FSTR_P msg;
- if (printingIsPaused())
- msg = GET_TEXT_F(MSG_PRINT_PAUSED);
- #if ENABLED(SDSUPPORT)
- else if (IS_SD_PRINTING())
- return set_status(card.longest_filename(), true);
- #endif
- else if (print_job_timer.isRunning())
- msg = GET_TEXT_F(MSG_PRINTING);
-
- #if SERVICE_INTERVAL_1 > 0
- else if (print_job_timer.needsService(1)) msg = FPSTR(service1);
- #endif
- #if SERVICE_INTERVAL_2 > 0
- else if (print_job_timer.needsService(2)) msg = FPSTR(service2);
- #endif
- #if SERVICE_INTERVAL_3 > 0
- else if (print_job_timer.needsService(3)) msg = FPSTR(service3);
- #endif
-
- else if (!no_welcome) msg = GET_TEXT_F(WELCOME_MSG);
-
- else if (ENABLED(DWIN_LCD_PROUI))
- msg = F("");
- else
- return;
-
- set_status(msg, -1);
- }
-
- /**
- * Set Status with a fixed string and alert level.
- * @param fstr A constant F-string to set as the status.
- * @param level Alert level. Negative to ignore and reset the level. Non-zero never expires.
- */
- void MarlinUI::set_status(FSTR_P const fstr, int8_t level) {
- // Alerts block lower priority messages
- if (level < 0) level = alert_level = 0;
- if (level < alert_level) return;
- alert_level = level;
-
- PGM_P const pstr = FTOP(fstr);
-
- // Since the message is encoded in UTF8 it must
- // only be cut on a character boundary.
-
- // Get a pointer to the null terminator
- PGM_P pend = pstr + strlen_P(pstr);
-
- // If length of supplied UTF8 string is greater than
- // the buffer size, start cutting whole UTF8 chars
- while ((pend - pstr) > MAX_MESSAGE_LENGTH) {
- --pend;
- while (!START_OF_UTF8_CHAR(pgm_read_byte(pend))) --pend;
- };
-
- // At this point, we have the proper cut point. Use it
- uint8_t maxLen = pend - pstr;
- strncpy_P(status_message, pstr, maxLen);
- status_message[maxLen] = '\0';
-
- TERN_(HOST_STATUS_NOTIFICATIONS, hostui.notify(fstr));
-
- finish_status(level > 0);
- }
-
- void MarlinUI::set_alert_status(FSTR_P const fstr) {
- set_status(fstr, 1);
- TERN_(HAS_TOUCH_SLEEP, wakeup_screen());
- TERN_(HAS_MARLINUI_MENU, return_to_status());
- }
-
- #include <stdarg.h>
-
- void MarlinUI::status_printf(int8_t level, FSTR_P const fmt, ...) {
- // Alerts block lower priority messages
- if (level < 0) level = alert_level = 0;
- if (level < alert_level) return;
- alert_level = level;
-
- va_list args;
- va_start(args, FTOP(fmt));
- vsnprintf_P(status_message, MAX_MESSAGE_LENGTH, FTOP(fmt), args);
- va_end(args);
-
- TERN_(HOST_STATUS_NOTIFICATIONS, hostui.notify(status_message));
-
- finish_status(level > 0);
- }
-
- void MarlinUI::finish_status(const bool persist) {
-
- UNUSED(persist);
-
- set_status_reset_fn();
-
- TERN_(HAS_STATUS_MESSAGE_TIMEOUT, status_message_expire_ms = persist ? 0 : millis() + (STATUS_MESSAGE_TIMEOUT_SEC) * 1000UL);
-
- #if HAS_WIRED_LCD
-
- #if BASIC_PROGRESS_BAR || BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
- const millis_t ms = millis();
- #endif
-
- #if BASIC_PROGRESS_BAR
- progress_bar_ms = ms;
- #if PROGRESS_MSG_EXPIRE > 0
- expire_status_ms = persist ? 0 : ms + PROGRESS_MSG_EXPIRE;
- #endif
- #endif
-
- #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
- next_filament_display = ms + 5000UL; // Show status message for 5s
- #endif
-
- #endif
-
- #if ENABLED(STATUS_MESSAGE_SCROLLING) && EITHER(HAS_WIRED_LCD, DWIN_LCD_PROUI)
- status_scroll_offset = 0;
- #endif
-
- TERN_(EXTENSIBLE_UI, ExtUI::onStatusChanged(status_message));
- TERN_(DWIN_CREALITY_LCD, DWIN_StatusChanged(status_message));
- TERN_(DWIN_LCD_PROUI, DWIN_CheckStatusMessage());
- TERN_(DWIN_CREALITY_LCD_JYERSUI, CrealityDWIN.Update_Status(status_message));
- }
-
- #if ENABLED(STATUS_MESSAGE_SCROLLING)
-
- void MarlinUI::advance_status_scroll() {
- // Advance by one UTF8 code-word
- if (status_scroll_offset < utf8_strlen(status_message))
- while (!START_OF_UTF8_CHAR(status_message[++status_scroll_offset]));
- else
- status_scroll_offset = 0;
- }
-
- char* MarlinUI::status_and_len(uint8_t &len) {
- char *out = status_message + status_scroll_offset;
- len = utf8_strlen(out);
- return out;
- }
-
- #endif
-
- #else // !HAS_STATUS_MESSAGE
-
- //
- // Send the status line as a host notification
- //
- void MarlinUI::set_status(const char * const cstr, const bool) {
- TERN(HOST_PROMPT_SUPPORT, hostui.notify(cstr), UNUSED(cstr));
- }
- void MarlinUI::set_status(FSTR_P const fstr, const int8_t) {
- TERN(HOST_PROMPT_SUPPORT, hostui.notify(fstr), UNUSED(fstr));
- }
- void MarlinUI::status_printf(int8_t, FSTR_P const fstr, ...) {
- TERN(HOST_PROMPT_SUPPORT, hostui.notify(fstr), UNUSED(fstr));
- }
-
- #endif // !HAS_STATUS_MESSAGE
-
- #if HAS_DISPLAY
-
- #if ENABLED(SDSUPPORT)
- extern bool wait_for_user, wait_for_heatup;
- #endif
-
- void MarlinUI::abort_print() {
- #if ENABLED(SDSUPPORT)
- wait_for_heatup = wait_for_user = false;
- card.abortFilePrintSoon();
- #endif
- #ifdef ACTION_ON_CANCEL
- hostui.cancel();
- #endif
- print_job_timer.stop();
- TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_open(PROMPT_INFO, F("UI Aborted"), FPSTR(DISMISS_STR)));
- LCD_MESSAGE(MSG_PRINT_ABORTED);
- TERN_(HAS_MARLINUI_MENU, return_to_status());
- }
-
- #if BOTH(HAS_MARLINUI_MENU, PSU_CONTROL)
-
- void MarlinUI::poweroff() {
- queue.inject(F("M81" TERN_(POWER_OFF_WAIT_FOR_COOLDOWN, "S")));
- return_to_status();
- }
-
- #endif
-
- void MarlinUI::flow_fault() {
- LCD_ALERTMESSAGE(MSG_FLOWMETER_FAULT);
- BUZZ(1000, 440);
- TERN_(HAS_MARLINUI_MENU, return_to_status());
- }
-
- void MarlinUI::pause_print() {
- #if HAS_MARLINUI_MENU
- synchronize(GET_TEXT_F(MSG_PAUSING));
- defer_status_screen();
- #endif
-
- TERN_(HAS_TOUCH_SLEEP, wakeup_screen());
- TERN_(HOST_PROMPT_SUPPORT, hostui.prompt_open(PROMPT_PAUSE_RESUME, F("UI Pause"), F("Resume")));
-
- LCD_MESSAGE(MSG_PRINT_PAUSED);
-
- #if ENABLED(PARK_HEAD_ON_PAUSE)
- pause_show_message(PAUSE_MESSAGE_PARKING, PAUSE_MODE_PAUSE_PRINT); // Show message immediately to let user know about pause in progress
- queue.inject(F("M25 P\nM24"));
- #elif ENABLED(SDSUPPORT)
- queue.inject(F("M25"));
- #elif defined(ACTION_ON_PAUSE)
- hostui.pause();
- #endif
- }
-
- void MarlinUI::resume_print() {
- reset_status();
- TERN_(PARK_HEAD_ON_PAUSE, wait_for_heatup = wait_for_user = false);
- TERN_(SDSUPPORT, if (IS_SD_PAUSED()) queue.inject_P(M24_STR));
- #ifdef ACTION_ON_RESUME
- hostui.resume();
- #endif
- print_job_timer.start(); // Also called by M24
- }
-
- #if HAS_TOUCH_BUTTONS
-
- //
- // Screen Click
- // - On menu screens move directly to the touched item
- // - On menu screens, right side (last 3 cols) acts like a scroll - half up => prev page, half down = next page
- // - On select screens (and others) touch the Right Half for +, Left Half for -
- // - On edit screens, touch Up Half for -, Bottom Half to +
- //
- void MarlinUI::screen_click(const uint8_t row, const uint8_t col, const uint8_t, const uint8_t) {
- const millis_t now = millis();
- if (PENDING(now, next_button_update_ms)) return;
- next_button_update_ms = now + repeat_delay; // Assume the repeat delay
- const int8_t xdir = col < (LCD_WIDTH ) / 2 ? -1 : 1,
- ydir = row < (LCD_HEIGHT) / 2 ? -1 : 1;
- if (on_edit_screen)
- encoderDiff = epps * ydir;
- else if (screen_items > 0) {
- // Last 5 cols act as a scroll :-)
- if (col > (LCD_WIDTH) - 5)
- // 2 * LCD_HEIGHT to scroll to bottom of next page. (LCD_HEIGHT would only go 1 item down.)
- encoderDiff = epps * (encoderLine - encoderTopLine + 2 * (LCD_HEIGHT)) * ydir;
- else
- encoderDiff = epps * (row - encoderPosition + encoderTopLine);
- }
- else if (!on_status_screen())
- encoderDiff = epps * xdir;
- }
-
- #endif
-
- #endif // HAS_DISPLAY
-
- #if HAS_PRINT_PROGRESS
-
- MarlinUI::progress_t MarlinUI::_get_progress() {
- return (
- TERN0(SET_PROGRESS_PERCENT, (progress_override & PROGRESS_MASK))
- #if ENABLED(SDSUPPORT)
- ?: TERN(HAS_PRINT_PROGRESS_PERMYRIAD, card.permyriadDone(), card.percentDone())
- #endif
- );
- }
-
- #if LCD_WITH_BLINK && DISABLED(HAS_GRAPHICAL_TFT)
- typedef void (*PrintProgress_t)();
- void MarlinUI::rotate_progress() { // Renew and redraw all enabled progress strings
- const PrintProgress_t progFunc[] = {
- OPTITEM(SHOW_PROGRESS_PERCENT, drawPercent)
- OPTITEM(SHOW_ELAPSED_TIME, drawElapsed)
- OPTITEM(SHOW_REMAINING_TIME, drawRemain)
- OPTITEM(SHOW_INTERACTION_TIME, drawInter)
- };
- static bool prev_blink;
- static uint8_t i;
- if (prev_blink != get_blink()) {
- prev_blink = get_blink();
- if (++i >= COUNT(progFunc)) i = 0;
- (*progFunc[i])();
- }
- }
- #endif
-
- #endif // HAS_PRINT_PROGRESS
-
- #if ENABLED(SDSUPPORT)
-
- #if ENABLED(EXTENSIBLE_UI)
- #include "extui/ui_api.h"
- #endif
-
- void MarlinUI::media_changed(const uint8_t old_status, const uint8_t status) {
- if (old_status == status) {
- TERN_(EXTENSIBLE_UI, ExtUI::onMediaError()); // Failed to mount/unmount
- return;
- }
-
- if (status) {
- if (old_status < 2) {
- #if ENABLED(EXTENSIBLE_UI)
- ExtUI::onMediaInserted();
- #elif ENABLED(BROWSE_MEDIA_ON_INSERT)
- clear_menu_history();
- quick_feedback();
- goto_screen(MEDIA_MENU_GATEWAY);
- #else
- LCD_MESSAGE(MSG_MEDIA_INSERTED);
- #endif
- }
- }
- else {
- if (old_status < 2) {
- #if ENABLED(EXTENSIBLE_UI)
- ExtUI::onMediaRemoved();
- #elif HAS_SD_DETECT
- LCD_MESSAGE(MSG_MEDIA_REMOVED);
- #if HAS_MARLINUI_MENU
- if (!defer_return_to_status) return_to_status();
- #endif
- #endif
- }
- }
-
- reinit_lcd(); // Revive a noisy shared SPI LCD
-
- refresh();
-
- #if HAS_WIRED_LCD || LED_POWEROFF_TIMEOUT > 0
- const millis_t ms = millis();
- #endif
-
- TERN_(HAS_WIRED_LCD, next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL); // Delay LCD update for SD activity
-
- #if LED_POWEROFF_TIMEOUT > 0
- leds.reset_timeout(ms);
- #endif
- }
-
- #endif // SDSUPPORT
-
- #if HAS_MARLINUI_MENU
- void MarlinUI::reset_settings() {
- settings.reset();
- completion_feedback();
- #if ENABLED(TOUCH_SCREEN_CALIBRATION)
- if (touch_calibration.need_calibration()) ui.goto_screen(touch_screen_calibration);
- #endif
- }
-
- #if EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
- void MarlinUI::zoffset_overlay(const_float_t zvalue) {
- // Determine whether the user is raising or lowering the nozzle.
- static int8_t dir;
- static float old_zvalue;
- if (zvalue != old_zvalue) {
- dir = zvalue ? zvalue < old_zvalue ? -1 : 1 : 0;
- old_zvalue = zvalue;
- }
- zoffset_overlay(dir);
- }
- #endif
-
- #endif
-
- #if BOTH(EXTENSIBLE_UI, ADVANCED_PAUSE_FEATURE)
-
- void MarlinUI::pause_show_message(
- const PauseMessage message,
- const PauseMode mode/*=PAUSE_MODE_SAME*/,
- const uint8_t extruder/*=active_extruder*/
- ) {
- pause_mode = mode;
- ExtUI::pauseModeStatus = message;
- switch (message) {
- case PAUSE_MESSAGE_PARKING: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_PAUSE_PRINT_PARKING)); break;
- case PAUSE_MESSAGE_CHANGING: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_INIT)); break;
- case PAUSE_MESSAGE_UNLOAD: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_UNLOAD)); break;
- case PAUSE_MESSAGE_WAITING: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_ADVANCED_PAUSE_WAITING)); break;
- case PAUSE_MESSAGE_INSERT: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_INSERT)); break;
- case PAUSE_MESSAGE_LOAD: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_LOAD)); break;
- case PAUSE_MESSAGE_PURGE:
- ExtUI::onUserConfirmRequired(GET_TEXT_F(TERN(ADVANCED_PAUSE_CONTINUOUS_PURGE, MSG_FILAMENT_CHANGE_CONT_PURGE, MSG_FILAMENT_CHANGE_PURGE)));
- break;
- case PAUSE_MESSAGE_RESUME: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_RESUME)); break;
- case PAUSE_MESSAGE_HEAT: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_HEAT)); break;
- case PAUSE_MESSAGE_HEATING: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_HEATING)); break;
- case PAUSE_MESSAGE_OPTION: ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_OPTION_HEADER)); break;
- case PAUSE_MESSAGE_STATUS: break;
- default: break;
- }
- }
-
- #endif
-
- #if ENABLED(EEPROM_SETTINGS)
-
- #if HAS_MARLINUI_MENU
- void MarlinUI::init_eeprom() {
- const bool good = settings.init_eeprom();
- completion_feedback(good);
- return_to_status();
- }
- void MarlinUI::load_settings() {
- const bool good = settings.load();
- completion_feedback(good);
- }
- void MarlinUI::store_settings() {
- const bool good = settings.save();
- completion_feedback(good);
- }
- #endif
-
- #if DISABLED(EEPROM_AUTO_INIT)
-
- static inline FSTR_P eeprom_err(const uint8_t msgid) {
- switch (msgid) {
- default:
- case 0: return GET_TEXT_F(MSG_ERR_EEPROM_CRC);
- case 1: return GET_TEXT_F(MSG_ERR_EEPROM_INDEX);
- case 2: return GET_TEXT_F(MSG_ERR_EEPROM_VERSION);
- }
- }
-
- void MarlinUI::eeprom_alert(const uint8_t msgid) {
- #if HAS_MARLINUI_MENU
- editable.uint8 = msgid;
- goto_screen([]{
- FSTR_P const restore_msg = GET_TEXT_F(MSG_INIT_EEPROM);
- char msg[utf8_strlen(restore_msg) + 1];
- strcpy_P(msg, FTOP(restore_msg));
- MenuItem_confirm::select_screen(
- GET_TEXT_F(MSG_BUTTON_RESET), GET_TEXT_F(MSG_BUTTON_IGNORE),
- init_eeprom, return_to_status,
- eeprom_err(editable.uint8), msg, F("?")
- );
- });
- #else
- set_status(eeprom_err(msgid));
- #endif
- }
-
- #endif // EEPROM_AUTO_INIT
-
- #endif // EEPROM_SETTINGS
|