123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Panda common pin assignments
- */
-
- #include "env_validate.h"
-
- #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
-
- //
- // Servos
- //
- #define SERVO0_PIN 0
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 4
- #define Y_STOP_PIN 35
- #define Z_STOP_PIN 21
-
- //
- // Steppers
- //
- #define X_STEP_PIN 101
- #define X_DIR_PIN 100
-
- #define Y_STEP_PIN 103
- #define Y_DIR_PIN 102
-
- #define Z_STEP_PIN 105
- #define Z_DIR_PIN 104
-
- #define E0_STEP_PIN 107
- #define E0_DIR_PIN 106
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 39 // Analog Input
- #define TEMP_BED_PIN 36 // Analog Input
-
- #if ENABLED(MAX31856_PANDAPI)
- #define MAX31856_CLK_PIN 29
- #define MAX31856_MISO_PIN 24
- #define MAX31856_MOSI_PIN 28
- #define MAX31856_CS_PIN 27
- #endif
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 108
- #define HEATER_BED_PIN 109
- #define FAN_PIN 118 // FAN0
- #define FAN1_PIN 119 // FAN1
-
- #ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN 120 // FAN2
- #endif
-
- /** ------ ------
- * (MISO 19?) | 1 2 | (18 SCK?) (BEEPER) 129 | 1 2 | 12 (^ENC)
- * (EN1) 33 | 3 4 | (5 SDSS?) (EN) 26 | 3 4 | 27 (RS)
- * (EN2) 32 5 6 | (23 MOSI?) (D4) 14 | 5 6 --
- * (SDDET 2?) | 7 8 | (RESET) -- | 7 8 | --
- * -- | 9 10 | -- (GND) | 9 10 | (5V)
- * ------ ------
- * EXP2 EXP1
- */
- #define EXP1_01_PIN 129
- #define EXP1_02_PIN 12
- #define EXP1_03_PIN 26
- #define EXP1_04_PIN 27
- #define EXP1_05_PIN 14
-
- #define EXP2_01_PIN 19 // ?
- #define EXP2_02_PIN 18 // ?
- #define EXP2_03_PIN 33
- #define EXP2_04_PIN 5 // ?
- #define EXP2_05_PIN 32
- #define EXP2_06_PIN 23 // ?
- #define EXP2_07_PIN 2 // ?
-
- //
- // SD Card
- //
- #if ENABLED(SDSUPPORT)
- #define SD_MOSI_PIN EXP2_06_PIN
- #define SD_MISO_PIN EXP2_01_PIN
- #define SD_SCK_PIN EXP2_02_PIN
- #define SDSS EXP2_04_PIN
- #define SD_DETECT_PIN EXP2_07_PIN
- #endif
-
- #if HAS_WIRED_LCD
- #define BEEPER_PIN EXP1_01_PIN
-
- #define BTN_ENC EXP1_02_PIN
- #define BTN_EN1 EXP2_03_PIN
- #define BTN_EN2 EXP2_05_PIN
-
- #define LCD_PINS_RS EXP1_04_PIN
- #define LCD_PINS_ENABLE EXP1_03_PIN
- #define LCD_PINS_D4 EXP1_05_PIN
- #endif
|