My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

pins_CHEAPTRONICv2.h 4.6KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <https://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Cheaptronic v2.0 pin assignments
  25. * Built and sold by Michal Dyntar - RRO
  26. * www.reprapobchod.cz
  27. */
  28. #include "env_validate.h"
  29. #define BOARD_INFO_NAME "Cheaptronic v2.0"
  30. //
  31. // Limit Switches
  32. //
  33. #define X_MIN_PIN 30
  34. #define X_MAX_PIN 31
  35. #define Y_MIN_PIN 32
  36. #define Y_MAX_PIN 33
  37. #define Z_MIN_PIN 34
  38. #define Z_MAX_PIN 35
  39. //
  40. // Steppers
  41. //
  42. #define X_STEP_PIN 17
  43. #define X_DIR_PIN 16
  44. #define X_ENABLE_PIN 48
  45. #define Y_STEP_PIN 54
  46. #define Y_DIR_PIN 47
  47. #define Y_ENABLE_PIN 55
  48. #define Z_STEP_PIN 57
  49. #define Z_DIR_PIN 56
  50. #define Z_ENABLE_PIN 62
  51. #define E0_STEP_PIN 23
  52. #define E0_DIR_PIN 22
  53. #define E0_ENABLE_PIN 24
  54. #define E1_STEP_PIN 26
  55. #define E1_DIR_PIN 25
  56. #define E1_ENABLE_PIN 27
  57. #define E2_STEP_PIN 29
  58. #define E2_DIR_PIN 28
  59. #define E2_ENABLE_PIN 39
  60. //
  61. // Temperature sensors
  62. //
  63. #define TEMP_0_PIN 15
  64. #define TEMP_1_PIN 13
  65. #define TEMP_2_PIN 14
  66. #define TEMP_3_PIN 11 // should be used for chamber temperature control
  67. #define TEMP_BED_PIN 12
  68. //
  69. // Heaters / Fans
  70. //
  71. #define HEATER_0_PIN 6
  72. #define HEATER_1_PIN 7
  73. #define HEATER_2_PIN 8
  74. #define HEATER_BED_PIN 9
  75. #ifndef FAN_PIN
  76. #define FAN_PIN 3
  77. #endif
  78. #define FAN2_PIN 58 // additional fan or light control output
  79. //
  80. // Other board specific pins
  81. //
  82. #ifndef FIL_RUNOUT_PIN
  83. #define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
  84. #endif
  85. #define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
  86. #define LED_PIN 13
  87. #define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
  88. #define EXT_2 5 // additional PWM pin 2 at JP1 connector
  89. #define EXT_3 2 // additional PWM pin 3 at JP1 connector
  90. #define PS_ON_PIN 45
  91. #define KILL_PIN 46
  92. #ifndef FILWIDTH_PIN
  93. #define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
  94. #endif
  95. //
  96. // LCD / Controller
  97. //
  98. #define LCD_PINS_RS 19
  99. #define LCD_PINS_ENABLE 42
  100. #define LCD_PINS_D4 18
  101. #define LCD_PINS_D5 38
  102. #define LCD_PINS_D6 41
  103. #define LCD_PINS_D7 40
  104. #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
  105. #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
  106. #endif
  107. //
  108. // Beeper, SD Card, Encoder
  109. //
  110. #define BEEPER_PIN 44
  111. #if ENABLED(SDSUPPORT)
  112. #define SDSS 53
  113. #define SD_DETECT_PIN 49
  114. #endif
  115. #if IS_NEWPANEL
  116. #define BTN_EN1 11
  117. #define BTN_EN2 12
  118. #define BTN_ENC 43
  119. #endif