123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Intamsys Funmat HT V4.0 Mainboard
- * 4988 Drivers Tested
- * 2208 version exists and may or may not work
- */
-
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Intamsys 4.0"
-
- //
- // Servos
- //
- #define SERVO0_PIN 12 // Uses High Temp Present Jumper Pin
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 22
- #define Y_STOP_PIN 26
- #define Z_MIN_PIN 29
- #define Z_MAX_PIN 69
-
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 69
- #endif
-
- #define FIL_RUNOUT_PIN 10
-
- //
- // Steppers
- //
- #define X_STEP_PIN 25
- #define X_DIR_PIN 23
- #define X_ENABLE_PIN 27 // 44
-
- #define Y_STEP_PIN 32 // 33
- #define Y_DIR_PIN 33 // 31, 32
- #define Y_ENABLE_PIN 31 // 32
-
- #define Z_STEP_PIN 35 // 35
- #define Z_DIR_PIN 36
- #define Z_ENABLE_PIN 34 // 34
-
- #define E0_STEP_PIN 42
- #define E0_DIR_PIN 43
- #define E0_ENABLE_PIN 37
-
- #define E1_STEP_PIN 49
- #define E1_DIR_PIN 47
- #define E1_ENABLE_PIN 48
-
- #define MOTOR_CURRENT_PWM_X_PIN 11
- #define MOTOR_CURRENT_PWM_Y_PIN 44
- #define MOTOR_CURRENT_PWM_Z_PIN 45
- #define MOTOR_CURRENT_PWM_E_PIN 46
-
- // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
- #ifndef MOTOR_CURRENT_PWM_RANGE
- #define MOTOR_CURRENT_PWM_RANGE 2000
- #endif
- #define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 }
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 8 // Analog Input D62
- #define TEMP_BED_PIN 10 // Analog Input D64
-
- #define TEMP_CHAMBER_PIN 9 // Analog Input D63
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 2 // PWM
- #define HEATER_BED_PIN 4 // PWM
- #define HEATER_CHAMBER_PIN 3 // PWM
- #define FAN_PIN 7 // PWM
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define SD_DETECT_PIN 39
-
- #if ENABLED(CASE_LIGHT_ENABLE)
- #define CASE_LIGHT_PIN 8
- #endif
-
- #if ENABLED(PSU_CONTROL)
- #define PS_ON_PIN 38 // UPS Module
- #endif
-
- //
- // LCD Controller
- //
-
- #define BEEPER_PIN 18
-
- #if HAS_WIRED_LCD
- #define LCD_PINS_RS 20
- #define LCD_PINS_ENABLE 30
- #define LCD_PINS_D4 14
- #define LCD_PINS_D5 21
- #define LCD_PINS_D6 5
- #define LCD_PINS_D7 6
- #define BTN_EN1 40
- #define BTN_EN2 41
- #define BTN_ENC 19
- #endif
-
- ///////////////////// SPARE HEADERS //////////////
-
- /**
- * J25
- * 1 D54
- * 2 D55
- * 3 D56
- * 4 D57
- * 5 D58
- * 6 D59
- * 7 D60
- * 8 D61
-
- Hotend High Temp Connected : D12
- */
|