123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Mightyboard Rev.E pin assignments
- * also works for Rev D boards. It's all rev E despite what the silk screen says
- */
-
- /**
- * Rev B 2 JAN 2017
- *
- * Added pin definitions for:
- * M3, M4 & M5 spindle control commands
- * case light
- *
- * Corrected pin assignment for EX2_HEAT_PIN pin. Changed it from 9 to 11. The port
- * number (B5) agrees with the schematic but B5 is assigned to logical pin 11.
- */
-
- #define ALLOW_MEGA1280
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Mightyboard"
- #define DEFAULT_MACHINE_NAME "MB Replicator"
-
- //
- // Servos
- //
- #define SERVO0_PIN 36 // C1 (1280-EX1)
- #define SERVO1_PIN 37 // C0 (1280-EX2)
- #define SERVO2_PIN 40 // G1 (1280-EX3)
- #define SERVO3_PIN 41 // G0 (1280-EX4)
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN 49 // L0
- #define X_MAX_PIN 48 // L1
- #define Y_MIN_PIN 47 // L2
- #define Y_MAX_PIN 46 // L3
- #define Z_MIN_PIN 43 // L6
- #define Z_MAX_PIN 42 // L7
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 42
- #endif
-
- //
- // Filament Runout Sensor
- //
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN 49
- #endif
- #ifndef FIL_RUNOUT2_PIN
- #define FIL_RUNOUT2_PIN 47
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 55 // F1
- #define X_DIR_PIN 54 // F0
- #define X_ENABLE_PIN 56 // F2
-
- #define Y_STEP_PIN 59 // F5
- #define Y_DIR_PIN 58 // F4
- #define Y_ENABLE_PIN 60 // F6
-
- #define Z_STEP_PIN 63 // K1
- #define Z_DIR_PIN 62 // K0
- #define Z_ENABLE_PIN 64 // K2
-
- #define E0_STEP_PIN 25 // A3
- #define E0_DIR_PIN 24 // A2
- #define E0_ENABLE_PIN 26 // A4
-
- #define E1_STEP_PIN 29 // A7
- #define E1_DIR_PIN 28 // A6
- #define E1_ENABLE_PIN 39 // G2
-
- //
- // I2C Digipots - MCP4018
- // Address 5E (2F << 1)
- // Set from 0 - 127 with stop bit.
- // (Ex. 3F << 1 | 1)
- //
- #define DIGIPOTS_I2C_SCL 76 // J5
- #define DIGIPOTS_I2C_SDA_X 57 // F3
- #define DIGIPOTS_I2C_SDA_Y 61 // F7
- #define DIGIPOTS_I2C_SDA_Z 65 // K3
- #define DIGIPOTS_I2C_SDA_E0 27 // A5
- #define DIGIPOTS_I2C_SDA_E1 77 // J6
-
- #ifndef DIGIPOT_I2C_ADDRESS_A
- #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
- #endif
- #define DIGIPOT_ENABLE_I2C_PULLUPS // MightyBoard doesn't have hardware I2C pin pull-ups.
-
- //
- // Temperature Sensors
- //
- // K7 - 69 / ADC15 - 15
- #define TEMP_BED_PIN 15
-
- // SPI for MAX Thermocouple
- // Uses a separate SPI bus
- //
- // 3 E5 DO (SO)
- // 5 E3 CS1
- // 2 E4 CS2
- // 78 E2 SCK
- //
- #define TEMP_0_CS_PIN 5 // E3
- #define TEMP_0_SCK_PIN 78 // E2
- #define TEMP_0_MISO_PIN 3 // E5
- //#define TEMP_0_MOSI_PIN ... // For MAX31865
-
- #define TEMP_1_CS_PIN 2 // E4
- #define TEMP_1_SCK_PIN TEMP_0_SCK_PIN
- #define TEMP_1_MISO_PIN TEMP_0_MISO_PIN
- //#define TEMP_1_MOSI_PIN TEMP_0_MOSI_PIN
-
- //
- // FET Pin Mapping - FET 1 is closest to the input power connector
- //
-
- #define MOSFET_1_PIN 6 // Plug EX1 Pin 1-2 -> PH3 #15 -> Logical 06
- #define MOSFET_2_PIN 7 // Plug EX1 Pin 3-4 -> PH4 #16 -> Logical 07
- #define MOSFET_3_PIN 11 // Plug EX2 1-2 -> PB5 #24 -> Logical 11
- #define MOSFET_4_PIN 12 // Plug EX2 3-4 -> PB6 #25 -> Logical 12
- #define MOSFET_5_PIN 45 // Plug HBD 1-2 -> PL4 #39 -> Logical 45
- #define MOSFET_6_PIN 44 // Plug Extra 1-2 -> PL5 #40 -> Logical 44 (FET not soldered in all boards)
-
- //
- // Heaters / Fans (24V)
- //
-
- #define HEATER_0_PIN MOSFET_1_PIN // EX1
- #define HEATER_1_PIN MOSFET_3_PIN // EX2
- #define HEATER_BED_PIN MOSFET_5_PIN // HBP
-
- // EX1 FAN (Automatic Fans are disabled by default in Configuration_adv.h - comment that out for auto fans)
- #ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN MOSFET_2_PIN
- #else
- #ifndef FAN_PIN
- #define FAN_PIN MOSFET_2_PIN
- #endif
- #endif
- // EX2 FAN (Automatic Fans are disabled by default in Configuration_adv.h - comment that out for auto fans)
- #ifndef E1_AUTO_FAN_PIN
- #define E1_AUTO_FAN_PIN MOSFET_4_PIN
- #else
- #ifndef FAN1_PIN
- #define FAN1_PIN MOSFET_4_PIN
- #endif
- #endif
-
- //
- // Misc. Functions
- //
- #define LED_PIN 13 // B7
- #define CUTOFF_RESET_PIN 16 // H1
- #define CUTOFF_TEST_PIN 17 // H0
- #define CUTOFF_SR_CHECK_PIN 70 // G4 (TOSC1)
-
- //
- // LCD / Controller
- //
- #if HAS_WIRED_LCD
-
- #if IS_RRD_FG_SC
-
- #define LCD_PINS_RS 33 // C4: LCD-STROBE
- #define LCD_PINS_ENABLE 72 // J2: LEFT
- #define LCD_PINS_D4 35 // C2: LCD-CLK
- #define LCD_PINS_D5 32 // C5: RLED
- #define LCD_PINS_D6 34 // C3: LCD-DATA
- #define LCD_PINS_D7 31 // C6: GLED
-
- #define BTN_EN2 75 // J4, UP
- #define BTN_EN1 73 // J3, DOWN
- // STOP button connected as KILL_PIN
- #define KILL_PIN 14 // J1, RIGHT (not connected)
-
- #define BEEPER_PIN 8 // H5, SD_WP
-
- // Onboard leds
- #define STAT_LED_RED_PIN SERVO0_PIN // C1 (1280-EX1, DEBUG2)
- #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
-
- #else
- // Replicator uses a 3-wire SR controller with HD44780
- #define SR_DATA_PIN 34 // C3
- #define SR_CLK_PIN 35 // C2
- #define SR_STROBE_PIN 33 // C4
-
- #define BTN_UP 75 // J4
- #define BTN_DOWN 73 // J3
- #define BTN_LEFT 72 // J2
- #define BTN_RIGHT 14 // J1
-
- // Disable encoder
- #undef BTN_EN1
- #undef BTN_EN2
-
- #define BEEPER_PIN 4 // G5
-
- #define STAT_LED_RED_PIN 32 // C5
- #define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
-
- #endif
-
- #define BTN_CENTER 15 // J0
- #define BTN_ENC BTN_CENTER
-
- #endif // HAS_WIRED_LCD
-
- //
- // SD Card
- //
- #define SDSS 53 // B0
- #define SD_DETECT_PIN 9 // H6
-
- #if HAS_TMC_UART
- /**
- * TMC220x stepper drivers
- *
- * Hardware serial communication ports.
- * If undefined software serial is used according to the pins below
- */
- #define X_HARDWARE_SERIAL Serial2
- #define Y_HARDWARE_SERIAL Serial1
-
- /**
- * Software serial
- */
-
- #define X_SERIAL_TX_PIN 16
- #define X_SERIAL_RX_PIN 17
-
- #define Y_SERIAL_TX_PIN 18
- #define Y_SERIAL_RX_PIN 19
-
- #define Z_SERIAL_TX_PIN 41
- #define Z_SERIAL_RX_PIN 66
-
- #define E0_SERIAL_TX_PIN 40
- #define E0_SERIAL_RX_PIN 67
-
- #define E1_SERIAL_TX_PIN 37
- #define E1_SERIAL_RX_PIN 68
-
- #endif
|