123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Arduino Mega for Tronxy X5S-2E, etc.
- */
-
- #define REQUIRE_MEGA2560
- #include "env_validate.h"
-
- #if HOTENDS > 2 || E_STEPPERS > 2
- #error "TRONXY-V3-1.0 supports up to 2 hotends/E steppers."
- #endif
-
- #define BOARD_INFO_NAME "TRONXY-V3-1.0"
-
- //
- // Servos
- //
- #define SERVO1_PIN 12 // 2560 PIN 25/PB6
-
- //
- // Import RAMPS 1.4 pins
- //
- #include "pins_RAMPS.h"
-
- /**
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
- * ===== AUX-1 connector =====
- *
- * 2 4 6 8
- * #----------------#
- * #2 | ° ° ° ° |
- * #1 | ° ° ° ° |
- * NOTCH #------ ------#
- * 1 3 5 7
- *
- * ###################################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ###################################
- * # 1 | VCC | + #
- * # 2 | VCC | + #
- * # 3 | GND | - #
- * # 4 | GND | - #
- * # 5 | N/C | #
- * # 6 | 3 / PE1 (TXD0) | D1 #
- * # 7 | N/C | #
- * # 8 | 2 / PE0 (RXD0) | D0 #
- * ###################################
- *
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
- * ===== Limit Switch connectors =====
- *
- * ############## X+ #################
- * X+ # Pin | ATMEGA2560 Pin | Arduino #
- * 1 2 3 ###################################
- * #- --- -# # 1 | 6 / PE4 (INT4) | D2 #
- * | ° ° ° | # 2 | GND | - #
- * #-------# # 3 | VCC | + #
- * ###################################
- *
- * ############## X- #################
- * X- # Pin | ATMEGA2560 Pin | Arduino #
- * 1 2 3 ###################################
- * #- --- -# # 1 | 7 / PE5 (INT5) | D3 #
- * | ° ° ° | # 2 | GND | - #
- * #-------# # 3 | VCC | + #
- * ###################################
- *
- * ############## Y+ #################
- * Y+ # Pin | ATMEGA2560 Pin | Arduino #
- * 1 2 3 ###################################
- * #- --- -# # 1 | 63/PJ0 (PCINT9) | D15 #
- * | ° ° ° | # 2 | GND | - #
- * #-------# # 3 | VCC | + #
- * ###################################
- *
- * ############## Y- #################
- * Y- # Pin | ATMEGA2560 Pin | Arduino #
- * 1 2 3 ###################################
- * #- --- -# # 1 | 64/PJ1 (PCINT10)| D14 #
- * | ° ° ° | # 2 | GND | - #
- * #-------# # 3 | VCC | + #
- * ###################################
- *
- * ############## Z+ #################
- * Z+ # Pin | ATMEGA2560 Pin | Arduino #
- * 1 2 3 ###################################
- * #- --- -# # 1 | 45 / PD2 (INT2) | D19 #
- * | ° ° ° | # 2 | GND | - #
- * #-------# # 3 | VCC | + #
- * ###################################
- *
- * ############## Z- #################
- * Z- # Pin | ATMEGA2560 Pin | Arduino #
- * 1 2 3 ###################################
- * #- --- -# # 1 | 46 / PD3 (INT3) | D18 #
- * | ° ° ° | # 2 | GND | - #
- * #-------# # 3 | VCC | + #
- * ###################################
- *
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
- * ===== EXP1/EXP2 connectors =====
- *
- * (NOTE ORDER) EXP2 EXP1
- * 2 4 6 8 10 2 4 6 8 10
- * #-------------------# #-------------------#
- * #2 | ° ° ° ° ° | #2 | ° ° ° ° ° |
- * #1 | ° ° ° ° ° | #1 | ° ° ° ° ° |
- * NOTCH #-------- -------# NOTCH #-------- -------#
- * 1 3 5 7 9 1 3 5 7 9
- *
- * ############# EXP1 ################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ###################################
- * # 1 | 53 / PC0 | D37 #
- * # 2 | 55 / PC2 | D35 #
- * # 3 | 12 / PH0 (RXD2) | D17 #
- * # 4 | 13 / PH1 (TXD2) | D16 #
- * # 5 | 77 / PA1 | D23 #
- * # 6 | 75 / PA3 | D25 #
- * # 7 | 73 / PA5 | D27 #
- * # 8 | 71 / PA7 | D29 #
- * # 9 | GND | - #
- * # 10 | VCC | + #
- * ###################################
- *
- * ############# EXP2 ################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ###################################
- * # 1 | 22 / PB3 (MISO) | D50 #
- * # 2 | 20 / PB1 (SCK) | D52 #
- * # 3 | 59 / PC6 | D31 #
- * # 4 | N/C | #
- * # 5 | 57 / PC4 | D33 #
- * # 6 | 21 / PB2 (MOSI) | D51 #
- * # 7 | N/C | #
- * # 8 | 30 / !RESET | RESET #
- * # 9 | GND | - #
- * # 10 | 51 / PG0 | D41 #
- * ###################################
- *
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
- * ===== ICSP connector =====
- *
- * 2 4 6
- * #---------#
- * | ° ° ° |
- * | ° ° ° |
- * #---------#
- * 1 3 5
- *
- * ##################################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ##################################
- * # 1 | 22 / PB3 (MISO)| 50 #
- * # 2 | VCC | + #
- * # 3 | 20 / PB1 (SCK) | 52 #
- * # 4 | 21 / PB2 (MOSI)| 51 #
- * # 5 | 30 / !RESET | RESET #
- * # 6 | GND | - #
- * ##################################
- *
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
- * ===== SERVOS connector =====
- *
- * 2 4 6
- * #---------#
- * | ° ° ° |
- * | ° ° ° |
- * #---------#
- * 1 3 5
- *
- * ##################################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ##################################
- * # 1 | 25 / PB6 (OC1B)| D12 #
- * # 2 | 24 / PB5 (OC1A)| D11 #
- * # 3 | GND | - #
- * # 4 | GND | - #
- * # 5 | VCC | + #
- * # 6 | VCC | + #
- * ##################################
- *
- * NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs.
- *
- * NOTE: Check servo wiring before connecting, for example:
- * + Airtronics (non-Z) use: Red = +; Black = -; Black & White, White or Orange = signal.
- * + Airtronics-Z use: Red = +; Black = -; Blue = signal.
- * + Futaba use: Red = +; Black = -; White = signal.
- * + Hitec use: Red = +; Black = -; Yellow = signal.
- * + JR use: Red = +; Brown = -; Orange = signal.
- *
- * NOTE: Test your servo limits:
- * Due to effects of component tolerances and/or age, the usable range of S-values for individual servos may be less than the settable 0-255 range. For example:
- * 1. One servo may have a fully usable range of M280 P0 S0 through M280 P0 S255.
- * 2. A different servo (of the same brand and model) may have a usable range of only M280 P0 S0 through M280 P0 S165 after which you experience binding.
- *
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
- * ===== Thermistor connectors =====
- *
- * (NOTE ORDER) TH2 TH1 TB
- * 1 2 1 2 1 2
- * #- -# #- -# #- -#
- * | ° ° | | ° ° | | ° ° |
- * #-----# #-----# #-----#
- *
- * ############## TB #################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ###################################
- * # 1 | GND | - #
- * # 2 | 83 / PK6 (ADC14)| A14 #
- * ###################################
- *
- * ############## TH1 ################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ###################################
- * # 1 | GND | - #
- * # 2 | 84 / PK5 (ADC13)| A13 #
- * ###################################
- *
- * ############## TH2 ################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ###################################
- * # 1 | GND | - #
- * # 2 | 82 / PK7 (ADC15)| A15 #
- * ###################################
- *
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- *
- * ===== XS3 connector =====
- *
- * 2 4 6
- * #---------#
- * | ° ° ° |
- * | ° ° ° |
- * #---------#
- * 1 3 5
- *
- * ##################################
- * # Pin | ATMEGA2560 Pin | Arduino #
- * ##################################
- * # 1 | 85 / ADC12 | A12 #
- * # 2 | 86 / ADC11 | A11 #
- * # 3 | GND | - #
- * # 4 | GND | - #
- * # 5 | VCC | + #
- * # 6 | VCC | + #
- * ##################################
- *
- * NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs.
- *
- * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
- */
|