123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #define ALLOW_MEGA644P
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Zonestar ZMIB_V2"
- #define BOARD_WEBSITE_URL "www.aliexpress.com/item/32957490744.html"
-
- #define IS_ZMIB_V2
-
- /**
- * ZMIB pin assignments
- *
- * The ZMIB board needs a bootloader installed before Marlin can be uploaded.
- * If you don't have a chip programmer you can use a spare Arduino plus a few
- * electronic components to write the bootloader.
- *
- * See https://www.instructables.com/Burn-Arduino-Bootloader-with-Arduino-MEGA/
- */
-
- /**
- * PIN: 0 Port: B0 HEATER_0_PIN
- * PIN: 1 Port: B1 HEATER_BED_PIN
- * PIN: 2 Port: B2 EXP1_4(BTN_EN2)
- * PIN: 3 Port: B3 V1: SD_DETECT_PIN
- * PIN: 3 Port: B3 V2: EXP1_6
- * PIN: 4 Port: B4 SDSS
- * PIN: 4 Port: B4 V1: EXP1_6
- * PIN: 5 Port: B5 AVR_MOSI_PIN
- * . SD_MOSI_PIN
- * PIN: 6 Port: B6 AVR_MISO_PIN
- * . EXP1_9(SD_MISO_PIN)
- * PIN: 7 Port: B7 AVR_SCK_PIN
- * . EXP1_10(SD_SCK_PIN)
- * PIN: 8 Port: D0 RXD
- * PIN: 9 Port: D1 TXD
- * PIN: 10 Port: D2 EXP1_8
- * PIN: 11 Port: D3 EXP1_7
- * PIN: 12 Port: D4 EXP1_5(BTN_EN1)
- * PIN: 13 Port: D5 Z_MIN_PIN
- * PIN: 14 Port: D6 E1_DIR_PIN
- * PIN: 15 Port: D7 E1_STEP_PIN
- * PIN: 16 Port: C0 Z_DIR_PIN
- * PIN: 17 Port: C1 Z_STEP_PIN
- * PIN: 18 Port: C2 Y_MIN_PIN
- * PIN: 19 Port: C3 Y_DIR_PIN
- * PIN: 20 Port: C4 Y_STEP_PIN
- * PIN: 21 Port: C5 X_MIN_PIN
- * PIN: 22 Port: C6 X_DIR_PIN
- * PIN: 23 Port: C7 X_STEP_PIN
- * PIN: 24 Port: A7 X_ENABLE_PIN
- * Y_ENABLE_PIN
- * Z_ENABLE_PIN
- * E0_ENABLE_PIN
- * E1_ENABLE_PIN
- * PIN: 25 Port: A6 FIL_RUNOUT_PIN
- * PIN: 26 Port: A5 E0_DIR_PIN
- * PIN: 27 Port: A4 E0_STEP_PIN
- * PIN: 28 Port: A3 FAN_PIN
- * PIN: 29 Port: A2 EXP1_3(BTN_ENC)
- * ADC_KEY_PIN
- * PIN: 30 Port: A1 TEMP_0_PIN
- * PIN: 31 Port: A0 TEMP_BED_PIN
- */
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN 21
- #define Y_MIN_PIN 18
-
- #if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
- #define Z_MIN_PIN 25
- #else
- #define Z_MIN_PIN 13
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 23
- #define X_DIR_PIN 22
- #define X_ENABLE_PIN 24
-
- #define Y_STEP_PIN 20
- #define Y_DIR_PIN 19
- #define Y_ENABLE_PIN 24
-
- #if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
- #define Z_STEP_PIN 27
- #define Z_DIR_PIN 26
- #else
- #define Z_STEP_PIN 17
- #define Z_DIR_PIN 16
- #endif
-
- #define Z_ENABLE_PIN 24
-
- #if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
- #define E0_STEP_PIN 15
- #define E0_DIR_PIN 14
- #else
- #define E0_STEP_PIN 27
- #define E0_DIR_PIN 26
- #endif
-
- #define E0_ENABLE_PIN 24
-
- #define E1_STEP_PIN 15
- #define E1_DIR_PIN 14
- #define E1_ENABLE_PIN 24
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 1 // Analog Input
- #define TEMP_BED_PIN 0 // Analog Input
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 0
- #define HEATER_BED_PIN 1
- #define FAN_PIN 28
- #define FAN1_PIN -1
-
- //
- // Filament Runout Sensor
- //
- #if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT)
- #define FIL_RUNOUT_PIN 13
- #else
- #define FIL_RUNOUT_PIN 25 // Z-MIN
- #endif
-
- //
- // SD card
- //
- #if ENABLED(SDSUPPORT)
- #define SDSS 4
- #endif
- #define SD_DETECT_PIN -1
-
- /** EXP1
- * ------
- * (MOSI) D5 | 1 2 | D7 (SCK)
- * (CS) D11 | 3 4 | D10 (DC/D4)
- * (EN2) D12 5 6 | D4 or D3 (EN/RS)
- * (ENC) D29 | 7 8 | D2 (EN1)
- * (GND) | 9 10 | (5V)
- * ------
- */
- #define EXP1_01_PIN 5
- #define EXP1_02_PIN 7
- #define EXP1_03_PIN 11
- #define EXP1_04_PIN 10
- #define EXP1_05_PIN 12
- #ifndef IS_ZMIB_V2
- #define EXP1_06_PIN 4 // ZMIB V1
- #else
- #define EXP1_06_PIN 3 // ZMIB V2
- #endif
- #define EXP1_07_PIN 29
- #define EXP1_08_PIN 2
-
- #if ENABLED(ZONESTAR_12864LCD)
- //
- // LCD 128x64
- //
- #define LCDSCREEN_NAME "ZONESTAR_12864LCD"
- #define FORCE_SOFT_SPI
- //#define LCD_SDSS EXP1_03_PIN
- #define LCD_PINS_RS EXP1_03_PIN // ST7920_CS_PIN (LCD module pin 4)
- #define LCD_PINS_ENABLE EXP1_06_PIN // ST7920_DAT_PIN (LCD module pin 5)
- #define LCD_PINS_D4 EXP1_04_PIN // ST7920_CLK_PIN (LCD module pin 6)
-
- #define BOARD_ST7920_DELAY_1 DELAY_2_NOP
- #define BOARD_ST7920_DELAY_2 DELAY_2_NOP
- #define BOARD_ST7920_DELAY_3 DELAY_2_NOP
-
- #elif EITHER(ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306)
- //
- // OLED 128x64
- //
- #define LCDSCREEN_NAME "ZONESTAR 12864OLED"
- #define FORCE_SOFT_SPI
- #define LCD_PINS_RS EXP1_06_PIN
- #define LCD_PINS_DC EXP1_04_PIN
- #define DOGLCD_CS EXP1_03_PIN
-
- #if ENABLED(OLED_HW_IIC)
- #error "Oops! can't choose HW IIC for ZMIB board!!"
- #else
- #define DOGLCD_A0 LCD_PINS_DC
- #if DISABLED(OLED_HW_SPI)
- #define DOGLCD_MOSI AVR_MOSI_PIN // Software SPI
- #define DOGLCD_SCK AVR_SCK_PIN
- #endif
- #endif
- #endif
-
- //
- // All the above are also RRDSC with rotary encoder
- //
- #if IS_RRD_SC
- #define BTN_EN1 EXP1_08_PIN
- #define BTN_EN2 EXP1_05_PIN
- #define BTN_ENC EXP1_07_PIN
- #define BEEPER_PIN -1
- #define KILL_PIN -1
- #endif
|