123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Creality v2.5.S1 (STM32F103RE / STM32F103RC) as found in the CR-10 Smart Pro
- */
-
- #include "env_validate.h"
-
- #if HAS_MULTI_HOTEND || E_STEPPERS > 1
- #error "Creality V2.5.S1 only supports 1 hotend / E stepper."
- #endif
-
- #define BOARD_INFO_NAME "Creality v2.5.S1"
- #define DEFAULT_MACHINE_NAME "Creality3D"
-
- //
- // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
- //
- #define DISABLE_DEBUG
-
- //
- // EEPROM
- //
- #if NO_EEPROM_SELECTED
- #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0
- //#define SDCARD_EEPROM_EMULATION
- //#define FLASH_EEPROM_EMULATION
- #endif
-
- #if ENABLED(IIC_BL24CXX_EEPROM)
- #define IIC_EEPROM_SDA PA11
- #define IIC_EEPROM_SCL PA12
- #define MARLIN_EEPROM_SIZE 0x800 // 2K (24C16)
- #elif EITHER(SDCARD_EEPROM_EMULATION, FLASH_EEPROM_EMULATION)
- #define MARLIN_EEPROM_SIZE 0x800 // 2K
- #endif
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN PC4
- #define Y_STOP_PIN PC5
-
- #if ENABLED(BLTOUCH)
- #define Z_STOP_PIN -1
- #define SERVO0_PIN PC14 // BLTouch OUT PIN
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN PC15 // BLTouch IN PIN
- #endif
- #else
- #define Z_STOP_PIN PC15
- #if ENABLED(PROBE_ACTIVATION_SWITCH)
- #define PROBE_TARE_PIN PC14
- #define PROBE_ACTIVATION_SWITCH_PIN PB2
- #endif
- #endif
-
- //
- // Filament Runout Sensor
- //
- #if ENABLED(FILAMENT_RUNOUT_SENSOR)
- #define FIL_RUNOUT_PIN PA15 // "Pulled-high"
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN PB8
- #define X_DIR_PIN PB7
- #define X_ENABLE_PIN PC3
-
- #define Y_STEP_PIN PB6
- #define Y_DIR_PIN PB5
- #define Y_ENABLE_PIN X_ENABLE_PIN
-
- #define Z_STEP_PIN PB4
- #define Z_DIR_PIN PB3
- #define Z_ENABLE_PIN X_ENABLE_PIN
-
- #define E0_STEP_PIN PC2
- #define E0_DIR_PIN PB9
- #define E0_ENABLE_PIN X_ENABLE_PIN
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PB1 // TH1
- #define TEMP_BED_PIN PB0 // TB1
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PB14 // HEATER1
- #define HEATER_BED_PIN PB13 // HOT BED
-
- #define FAN_PIN PB15 // FAN
- #ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN PC13 // FAN
- #endif
- #define FAN_SOFT_PWM_REQUIRED
-
- //
- // SD Card
- //
- #define SD_DETECT_PIN PC7
- #define SDCARD_CONNECTION ONBOARD
- #define ON_BOARD_SPI_DEVICE 1
- #define ONBOARD_SD_CS_PIN PC12 // SDSS
- #define SDIO_SUPPORT
- #define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer
-
- //
- // Misc. Functions
- //
- #define CASE_LIGHT_PIN PA7
-
- //
- // Suicide Power
- //
- #define PS_ON_PIN PA0
- #define MOTOR_CIRCUIT_PIN PA1
-
- //
- // Motor Protect
- //
- #define MOTOR_PROTECT_PIN PC0
-
- //
- // WiFi Reset
- //
- #define RESET_WIFI_PIN PB12
|