| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960 |
- #!/usr/bin/env bash
- #
- # Build tests for BigTreeTech GTR 1.0
- #
-
- # exit on first failure
- set -e
-
- restore_configs
- opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
- opt_set SERIAL_PORT -1
- opt_set EXTRUDERS 8
- opt_set TEMP_SENSOR_1 1
- opt_set TEMP_SENSOR_2 1
- opt_set TEMP_SENSOR_3 1
- opt_set TEMP_SENSOR_4 1
- opt_set TEMP_SENSOR_5 1
- opt_set TEMP_SENSOR_6 1
- opt_set TEMP_SENSOR_7 1
- # Not necessary to enable auto-fan for all extruders to hit problematic code paths
- opt_set E0_AUTO_FAN_PIN PC10
- opt_set E1_AUTO_FAN_PIN PC11
- opt_set E2_AUTO_FAN_PIN PC12
- opt_set X_DRIVER_TYPE TMC2208
- opt_set Y_DRIVER_TYPE TMC2130
- opt_set NEOPIXEL_PIN PF13
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING
- opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
- opt_set FIL_RUNOUT_PIN 3
- opt_set FIL_RUNOUT2_PIN 4
- opt_set FIL_RUNOUT3_PIN 5
- opt_set FIL_RUNOUT4_PIN 6
- opt_set FIL_RUNOUT5_PIN 7
- opt_set FIL_RUNOUT6_PIN 8
- opt_set FIL_RUNOUT7_PIN 9
- opt_set FIL_RUNOUT8_PIN 10
- opt_set FIL_RUNOUT4_STATE HIGH
- opt_enable FIL_RUNOUT4_PULLUP
- opt_set FIL_RUNOUT8_STATE HIGH
- opt_enable FIL_RUNOUT8_PULLUP
- exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states" "$3"
-
- restore_configs
- opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0
- opt_set SERIAL_PORT -1
- opt_set EXTRUDERS 6
- opt_set TEMP_SENSOR_1 1
- opt_set TEMP_SENSOR_2 1
- opt_set TEMP_SENSOR_3 1
- opt_set TEMP_SENSOR_4 1
- opt_set TEMP_SENSOR_5 1
- opt_set NUM_Z_STEPPER_DRIVERS 3
- opt_set DEFAULT_Kp_LIST "{ 22.2, 20.0, 21.0, 19.0, 18.0, 17.0 }"
- opt_set DEFAULT_Ki_LIST "{ 1.08 }"
- opt_set DEFAULT_Kd_LIST "{ 114.0, 112.0, 110.0, 108.0 }"
- opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_INIT_BEFORE_SWAP TOOLCHANGE_FS_PRIME_FIRST_USED PID_PARAMS_PER_HOTEND
- exec_test $1 $2 "BigTreeTech GTR 6 Extruders Triple Z" "$3"
-
- # clean up
- restore_configs
|
