123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * German
- *
- * LCD Menu Messages
- * See also http://marlinfw.org/docs/development/lcd_language.html
- *
- */
-
- #define CHARSIZE 2
-
- #define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³")
-
- #define WELCOME_MSG MACHINE_NAME _UxGT(" bereit")
- #define MSG_YES _UxGT("JA")
- #define MSG_NO _UxGT("NEIN")
- #define MSG_BACK _UxGT("Zurück")
- #define MSG_SD_INSERTED _UxGT("SD-Karte erkannt")
- #define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")
- #define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters
- #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft-Endstopp")
- #define MSG_MAIN _UxGT("Hauptmenü")
- #define MSG_ADVANCED_SETTINGS _UxGT("Erw. Einstellungen")
- #define MSG_CONFIGURATION _UxGT("Konfiguration")
- #define MSG_AUTOSTART _UxGT("Autostart")
- #define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84
- #define MSG_DEBUG_MENU _UxGT("Debug-Menü")
- #define MSG_PROGRESS_BAR_TEST _UxGT("Statusbalken-Test")
- #define MSG_AUTO_HOME _UxGT("Home XYZ") // G28
- #define MSG_AUTO_HOME_X _UxGT("Home X")
- #define MSG_AUTO_HOME_Y _UxGT("Home Y")
- #define MSG_AUTO_HOME_Z _UxGT("Home Z")
- #define MSG_AUTO_Z_ALIGN _UxGT("Z-Achsen ausgleichen")
- #define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ")
- #define MSG_LEVEL_BED_WAITING _UxGT("Klick zum Starten")
- #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate")
- #define MSG_LEVEL_BED_DONE _UxGT("Nivellieren fertig!")
- #define MSG_Z_FADE_HEIGHT _UxGT("Ausblendhöhe")
- #define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")
- #define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")
- #define MSG_SET_ORIGIN _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
- #define MSG_PREHEAT_1 _UxGT("Vorwärmen " PREHEAT_1_LABEL)
- #define MSG_PREHEAT_1_N _UxGT("Vorwärmen " PREHEAT_1_LABEL " ")
- #define MSG_PREHEAT_1_ALL _UxGT("Vorw. " PREHEAT_1_LABEL " Alles")
- #define MSG_PREHEAT_1_END _UxGT("Vorw. " PREHEAT_1_LABEL " Extr.")
- #define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. " PREHEAT_1_LABEL " Bett")
- #define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. " PREHEAT_1_LABEL " Einst.")
- #define MSG_PREHEAT_2 _UxGT("Vorwärmen " PREHEAT_2_LABEL)
- #define MSG_PREHEAT_2_N _UxGT("Vorwärmen " PREHEAT_2_LABEL " ")
- #define MSG_PREHEAT_2_ALL _UxGT("Vorw. " PREHEAT_2_LABEL " Alles")
- #define MSG_PREHEAT_2_END _UxGT("Vorw. " PREHEAT_2_LABEL " Extr.")
- #define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. " PREHEAT_2_LABEL " Bett")
- #define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. " PREHEAT_2_LABEL " Einst.")
- #define MSG_PREHEAT_CUSTOM _UxGT("benutzerdef. Heizen")
- #define MSG_COOLDOWN _UxGT("Abkühlen")
- #define MSG_LASER_MENU _UxGT("Laser")
- #define MSG_LASER_OFF _UxGT("Laser aus")
- #define MSG_LASER_ON _UxGT("Laser an")
- #define MSG_LASER_POWER _UxGT("Laserleistung")
- #define MSG_SPINDLE_REVERSE _UxGT("Spindelrichtung")
- #define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")
- #define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")
- #define MSG_EXTRUDE _UxGT("Extrudieren")
- #define MSG_RETRACT _UxGT("Rückzug")
- #define MSG_MOVE_AXIS _UxGT("Achse Bewegen")
- #define MSG_BED_LEVELING _UxGT("Bett-Nivellierung")
- #define MSG_LEVEL_BED _UxGT("Bett nivellieren")
- #define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren")
- #define MSG_NEXT_CORNER _UxGT("Nächste Ecke")
- #define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.")
- #define MSG_MESH_X _UxGT("Index X")
- #define MSG_MESH_Y _UxGT("Index Y")
- #define MSG_MESH_EDIT_Z _UxGT("Z-Wert")
- #define MSG_USER_MENU _UxGT("Benutzer-Menü")
- #define MSG_UBL_DOING_G29 _UxGT("G29 ausführen")
- #define MSG_UBL_UNHOMED _UxGT("Home XYZ zuerst")
- #define MSG_UBL_TOOLS _UxGT("UBL-Werkzeuge")
- #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
- #define MSG_IDEX_MENU _UxGT("IDEX-Modus")
- #define MSG_OFFSETS_MENU _UxGT("Werkzeugversätze")
- #define MSG_IDEX_MODE_AUTOPARK _UxGT("Autom. Parken")
- #define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplizieren")
- #define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Spiegelkopie")
- #define MSG_IDEX_MODE_FULL_CTRL _UxGT("vollstä. Kontrolle")
- #define MSG_X_OFFSET _UxGT("2. Düse X")
- #define MSG_Y_OFFSET _UxGT("2. Düse Y")
- #define MSG_Z_OFFSET _UxGT("2. Düse Z")
- #define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.")
- #define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen")
- #define MSG_UBL_BC_INSERT2 _UxGT("Messen")
- #define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen")
- #define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...")
- #define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren")
- #define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren")
- #define MSG_UBL_SET_TEMP_BED _UxGT("Betttemperatur")
- #define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
- #define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend-Temp.")
- #define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
- #define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten")
- #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.")
- #define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...")
- #define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet")
- #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.")
- #define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen")
- #define MSG_UBL_BUILD_MESH_M1 _UxGT("Netz erstellen " PREHEAT_1_LABEL)
- #define MSG_UBL_BUILD_MESH_M2 _UxGT("Netz erstellen " PREHEAT_2_LABEL)
- #define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")
- #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netzhöhe einst.")
- #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe")
- #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")
- #define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Netz validieren " PREHEAT_1_LABEL)
- #define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Netz validieren " PREHEAT_2_LABEL)
- #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")
- #define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")
- #define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung")
- #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt-Nivell.")
- #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz-Nivell.")
- #define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren")
- #define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte")
- #define MSG_UBL_MAP_TYPE _UxGT("Kartentyp")
- #define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben")
- #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host")
- #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV")
- #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Externe Sicherung")
- #define MSG_UBL_INFO_UBL _UxGT("UBL-Info ausgeben")
- #define MSG_EDIT_MESH _UxGT("Netz bearbeiten")
- #define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Füllung")
- #define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Füllen")
- #define MSG_UBL_SMART_FILLIN _UxGT("Cleveres Füllen")
- #define MSG_UBL_FILLIN_MESH _UxGT("Netz Füllen")
- #define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren")
- #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.")
- #define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinst. Alles")
- #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.")
- #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz-Speicherplatz")
- #define MSG_UBL_STORAGE_SLOT _UxGT("Speicherort")
- #define MSG_UBL_LOAD_MESH _UxGT("Bettnetz laden")
- #define MSG_UBL_SAVE_MESH _UxGT("Bettnetz speichern")
- #define MSG_MESH_LOADED _UxGT("Netz %i geladen")
- #define MSG_MESH_SAVED _UxGT("Netz %i gespeichert")
- #define MSG_NO_STORAGE _UxGT("Kein Speicher")
- #define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern")
- #define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.")
- #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten")
- #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL")
-
- #define MSG_LED_CONTROL _UxGT("LED-Steuerung")
- #define MSG_LEDS _UxGT("Licht")
- #define MSG_LED_PRESETS _UxGT("Licht-Einstellungen")
- #define MSG_SET_LEDS_RED _UxGT("Rot")
- #define MSG_SET_LEDS_ORANGE _UxGT("Orange")
- #define MSG_SET_LEDS_YELLOW _UxGT("Gelb")
- #define MSG_SET_LEDS_GREEN _UxGT("Grün")
- #define MSG_SET_LEDS_BLUE _UxGT("Blau")
- #define MSG_SET_LEDS_INDIGO _UxGT("Indigo")
- #define MSG_SET_LEDS_VIOLET _UxGT("Violett")
- #define MSG_SET_LEDS_WHITE _UxGT("Weiß")
- #define MSG_SET_LEDS_DEFAULT _UxGT("Standard")
- #define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.")
- #define MSG_INTENSITY_R _UxGT("Intensität Rot")
- #define MSG_INTENSITY_G _UxGT("Intensität Grün")
- #define MSG_INTENSITY_B _UxGT("Intensität Blau")
- #define MSG_INTENSITY_W _UxGT("Intensität Weiß")
- #define MSG_LED_BRIGHTNESS _UxGT("Helligkeit")
-
- #define MSG_MOVING _UxGT("In Bewegung...")
- #define MSG_FREE_XY _UxGT("Abstand XY")
- #define MSG_MOVE_X _UxGT("Bewege X")
- #define MSG_MOVE_Y _UxGT("Bewege Y")
- #define MSG_MOVE_Z _UxGT("Bewege Z")
- #define MSG_MOVE_E _UxGT("Bewege Extruder")
- #define MSG_HOTEND_TOO_COLD _UxGT("Hotend zu kalt")
- #define MSG_MOVE_01MM _UxGT(" 0,1 mm")
- #define MSG_MOVE_1MM _UxGT(" 1,0 mm")
- #define MSG_MOVE_10MM _UxGT("10,0 mm")
- #define MSG_SPEED _UxGT("Geschw.")
- #define MSG_BED_Z _UxGT("Bett Z")
- #define MSG_NOZZLE _UxGT("Düse")
- #define MSG_BED _UxGT("Bett")
- #define MSG_CHAMBER _UxGT("Gehäuse")
- #define MSG_FAN_SPEED _UxGT("Lüfter")
- #define MSG_EXTRA_FAN_SPEED _UxGT("Geschw. Extralüfter")
- #define MSG_FLOW _UxGT("Flussrate")
- #define MSG_CONTROL _UxGT("Einstellungen")
- #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min")
- #define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")
- #define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")
- #define MSG_AUTOTEMP _UxGT("Auto Temperatur")
- #define MSG_LCD_ON _UxGT("Ein")
- #define MSG_LCD_OFF _UxGT("Aus")
- #define MSG_PID_P _UxGT("PID P")
- #define MSG_PID_I _UxGT("PID I")
- #define MSG_PID_D _UxGT("PID D")
- #define MSG_PID_C _UxGT("PID C")
- #define MSG_SELECT _UxGT("Auswählen")
- #define MSG_ACC _UxGT("Beschleunigung")
- #define MSG_JERK _UxGT("Jerk")
- #if IS_KINEMATIC
- #define MSG_VA_JERK _UxGT("V A Jerk")
- #define MSG_VB_JERK _UxGT("V B Jerk")
- #define MSG_VC_JERK _UxGT("V C Jerk")
- #else
- #define MSG_VA_JERK _UxGT("V X Jerk")
- #define MSG_VB_JERK _UxGT("V Y Jerk")
- #define MSG_VC_JERK _UxGT("V Z Jerk")
- #endif
- #define MSG_VE_JERK _UxGT("V E Jerk")
- #define MSG_JUNCTION_DEVIATION _UxGT("Junction Dev")
- #define MSG_VELOCITY _UxGT("Geschwindigkeit")
- #define MSG_VMAX _UxGT("V max ") // space intentional
- #define MSG_VMIN _UxGT("V min")
- #define MSG_VTRAV_MIN _UxGT("V min Leerfahrt")
- #define MSG_ACCELERATION _UxGT("Beschleunigung")
- #define MSG_AMAX _UxGT("A max ") // space intentional
- #define MSG_A_RETRACT _UxGT("A Rückzug")
- #define MSG_A_TRAVEL _UxGT("A Leerfahrt")
- #define MSG_STEPS_PER_MM _UxGT("Steps/mm")
- #if IS_KINEMATIC
- #define MSG_ASTEPS _UxGT("A Steps/mm")
- #define MSG_BSTEPS _UxGT("B Steps/mm")
- #define MSG_CSTEPS _UxGT("C Steps/mm")
- #else
- #define MSG_ASTEPS _UxGT("X Steps/mm")
- #define MSG_BSTEPS _UxGT("Y Steps/mm")
- #define MSG_CSTEPS _UxGT("Z Steps/mm")
- #endif
- #define MSG_ESTEPS _UxGT("E Steps/mm")
- #define MSG_E1STEPS _UxGT("E1 Steps/mm")
- #define MSG_E2STEPS _UxGT("E2 Steps/mm")
- #define MSG_E3STEPS _UxGT("E3 Steps/mm")
- #define MSG_E4STEPS _UxGT("E4 Steps/mm")
- #define MSG_E5STEPS _UxGT("E5 Steps/mm")
- #define MSG_E6STEPS _UxGT("E6 Steps/mm")
- #define MSG_TEMPERATURE _UxGT("Temperatur")
- #define MSG_MOTION _UxGT("Bewegung")
- #define MSG_FILAMENT _UxGT("Filament")
- #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³")
- #define MSG_FILAMENT_DIAM _UxGT("Durchm. Filament")
- #define MSG_FILAMENT_UNLOAD _UxGT("Entladen mm")
- #define MSG_FILAMENT_LOAD _UxGT("Laden mm")
- #define MSG_ADVANCE_K _UxGT("Vorschubfaktor")
- #define MSG_CONTRAST _UxGT("LCD-Kontrast")
- #define MSG_STORE_EEPROM _UxGT("Konfig. speichern")
- #define MSG_LOAD_EEPROM _UxGT("Konfig. laden")
- #define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden")
- #define MSG_INIT_EEPROM _UxGT("Werkseinstellungen")
- #define MSG_SD_UPDATE _UxGT("SD-Firmware-Update")
- #define MSG_RESET_PRINTER _UxGT("Drucker neustarten")
- #define MSG_REFRESH _UxGT("Aktualisieren")
- #define MSG_WATCH _UxGT("Info")
- #define MSG_PREPARE _UxGT("Vorbereitung")
- #define MSG_TUNE _UxGT("Justierung")
- #define MSG_START_PRINT _UxGT("Starte Druck")
- #define MSG_BUTTON_PRINT _UxGT("Drucke")
- #define MSG_BUTTON_CANCEL _UxGT("Abbrechen")
- #define MSG_PAUSE_PRINT _UxGT("SD-Druck pausieren")
- #define MSG_RESUME_PRINT _UxGT("SD-Druck fortsetzen")
- #define MSG_STOP_PRINT _UxGT("SD-Druck abbrechen")
- #define MSG_OUTAGE_RECOVERY _UxGT("Wiederh. n. Stroma.")
- #define MSG_CARD_MENU _UxGT("Druck v. SD-Karte")
- #define MSG_NO_CARD _UxGT("Keine SD-Karte")
- #define MSG_DWELL _UxGT("Warten...")
- #define MSG_USERWAIT _UxGT("Klick zum Fortsetzen")
- #define MSG_PRINT_PAUSED _UxGT("Druck pausiert...")
- #define MSG_PRINTING _UxGT("Druckt...")
- #define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen")
- #define MSG_NO_MOVE _UxGT("Motoren angeschaltet")
- #define MSG_KILLED _UxGT("ABGEBROCHEN")
- #define MSG_STOPPED _UxGT("ANGEHALTEN")
- #define MSG_CONTROL_RETRACT _UxGT("Rückzug mm")
- #define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Rückzug mm")
- #define MSG_CONTROL_RETRACTF _UxGT("Rückzug V")
- #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Z-Sprung mm")
- #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
- #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")
- #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
- #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
- #define MSG_AUTORETRACT _UxGT("Autom. Rückzug")
- #define MSG_FILAMENT_SWAP_LENGTH _UxGT("Rückzugslänge")
- #define MSG_TOOL_CHANGE _UxGT("Werkzeugwechsel")
- #define MSG_TOOL_CHANGE_ZLIFT _UxGT("Z anheben")
- #define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Prime-Geschwin.")
- #define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Rückzug-Geschwin.")
- #define MSG_NOZZLE_STANDBY _UxGT("Düsen-Standby")
- #define MSG_FILAMENTCHANGE _UxGT("Filament wechseln")
- #define MSG_FILAMENTLOAD _UxGT("Filament laden")
- #define MSG_FILAMENTUNLOAD _UxGT("Filament entladen")
- #define MSG_FILAMENTUNLOAD_ALL _UxGT("Alles entladen")
- #define MSG_INIT_SDCARD _UxGT("SD-Karte initialisi.") // Manually initialize the SD-card via user interface
- #define MSG_CHANGE_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
- #define MSG_ZPROBE_OUT _UxGT("Z-Sonde außerhalb")
- #define MSG_SKEW_FACTOR _UxGT("Korrekturfaktor")
- #define MSG_BLTOUCH _UxGT("BLTouch")
- #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selbsttest")
- #define MSG_BLTOUCH_RESET _UxGT("BLTouch zurücks.")
- #define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch ausfahren")
- #define MSG_BLTOUCH_SW_MODE _UxGT("BLTouch SW-Modus")
- #define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V-Modus")
- #define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren")
- #define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren")
- #define MSG_MANUAL_DEPLOY _UxGT("Z-Sonde ausfahren")
- #define MSG_MANUAL_STOW _UxGT("Z-Sonde einfahren")
- #define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
- #define MSG_FIRST _UxGT("homen")
- #define MSG_ZPROBE_ZOFFSET _UxGT("Sondenversatz Z")
- #define MSG_BABYSTEP_X _UxGT("Babystep X")
- #define MSG_BABYSTEP_Y _UxGT("Babystep Y")
- #define MSG_BABYSTEP_Z _UxGT("Babystep Z")
- #define MSG_BABYSTEP_TOTAL _UxGT("Total")
- #define MSG_ENDSTOP_ABORT _UxGT("Endstopp Abbr.")
- #define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN ERFOLGLOS")
- #define MSG_HEATING_FAILED_LCD_BED _UxGT("Bett heizen fehlge.")
- #define MSG_HEATING_FAILED_LCD_CHAMBER _UxGT("Geh. heizen fehlge.")
- #define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMP-ABWEI.")
- #define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
- #define MSG_THERMAL_RUNAWAY_BED _UxGT("BETT") MSG_THERMAL_RUNAWAY
- #define MSG_THERMAL_RUNAWAY_CHAMBER _UxGT("GEH.") MSG_THERMAL_RUNAWAY
- #define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
- #define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
- #define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
- #define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
- #define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err: GEHÄUSE MAX TEM")
- #define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err: GEHÄUSE MIN TEM")
- #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
- #define MSG_HALTED _UxGT("DRUCKER STOPP")
- #define MSG_PLEASE_RESET _UxGT("Bitte neustarten")
- #define MSG_SHORT_DAY _UxGT("t") // One character only
- #define MSG_SHORT_HOUR _UxGT("h") // One character only
- #define MSG_SHORT_MINUTE _UxGT("m") // One character only
- #define MSG_HEATING _UxGT("Extr. heizt...")
- #define MSG_COOLING _UxGT("Extr. kühlt...")
- #define MSG_BED_HEATING _UxGT("Bett heizt...")
- #define MSG_BED_COOLING _UxGT("Bett kühlt...")
- #define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren")
- #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X")
- #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y")
- #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z")
- #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte")
- #define MSG_DELTA_SETTINGS _UxGT("Delta Einst. anzeig.")
- #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung")
- #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen")
- #define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Sondenversatz Z")
- #define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod")
- #define MSG_DELTA_HEIGHT _UxGT("Höhe")
- #define MSG_DELTA_RADIUS _UxGT("Radius")
- #define MSG_INFO_MENU _UxGT("Über den Drucker")
- #define MSG_INFO_PRINTER_MENU _UxGT("Drucker-Info")
- #define MSG_3POINT_LEVELING _UxGT("3-Punkt-Nivellierung")
- #define MSG_LINEAR_LEVELING _UxGT("Lineare Nivellierung")
- #define MSG_BILINEAR_LEVELING _UxGT("Bilineare Nivell.")
- #define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling")
- #define MSG_MESH_LEVELING _UxGT("Netz-Nivellierung")
- #define MSG_INFO_STATS_MENU _UxGT("Drucker-Statistik")
- #define MSG_INFO_BOARD_MENU _UxGT("Board-Info")
- #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren")
- #define MSG_INFO_EXTRUDERS _UxGT("Extruder")
- #define MSG_INFO_BAUDRATE _UxGT("Baudrate")
- #define MSG_INFO_PROTOCOL _UxGT("Protokoll")
- #define MSG_CASE_LIGHT _UxGT("Beleuchtung")
- #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit")
-
- #if LCD_WIDTH >= 20
- #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
- #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette Drucke")
- #define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit")
- #define MSG_INFO_PRINT_LONGEST _UxGT("Längste Druckzeit")
- #define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert")
- #else
- #define MSG_INFO_PRINT_COUNT _UxGT("Drucke")
- #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette")
- #define MSG_INFO_PRINT_TIME _UxGT("Gesamte")
- #define MSG_INFO_PRINT_LONGEST _UxGT("Längste")
- #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.")
- #endif
-
- #define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
- #define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
- #define MSG_INFO_PSU _UxGT("Netzteil")
- #define MSG_DRIVE_STRENGTH _UxGT("Motorleistung")
- #define MSG_DAC_PERCENT _UxGT("Treiber %")
- #define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
- #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT")
- #define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("FILAMENT LADEN")
- #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("FILAMENT ENTLADEN")
- #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:")
- #define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Mehr entladen")
- #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Druck weiter")
- #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")
- #define MSG_RUNOUT_SENSOR _UxGT("Auslaufsensor")
- #define MSG_ERR_HOMING_FAILED _UxGT("Homing gescheitert")
- #define MSG_ERR_PROBING_FAILED _UxGT("Probing gescheitert")
- #define MSG_M600_TOO_COLD _UxGT("M600: zu kalt")
-
- #define MSG_MMU2_FILAMENT_CHANGE_HEADER _UxGT("FILAMENT WECHSEL")
- #define MSG_MMU2_CHOOSE_FILAMENT_HEADER _UxGT("FILAMENT WÄHLEN")
- #define MSG_MMU2_MENU _UxGT("MMU")
- #define MSG_MMU2_WRONG_FIRMWARE _UxGT("Update MMU Firmware!")
- #define MSG_MMU2_NOT_RESPONDING _UxGT("MMU handeln erfor.")
- #define MSG_MMU2_RESUME _UxGT("Druck fortsetzen")
- #define MSG_MMU2_RESUMING _UxGT("Fortfahren...")
- #define MSG_MMU2_LOAD_FILAMENT MSG_FILAMENTLOAD
- #define MSG_MMU2_LOAD_ALL _UxGT("Lade alle")
- #define MSG_MMU2_LOAD_TO_NOZZLE _UxGT("Düse laden")
- #define MSG_MMU2_EJECT_FILAMENT _UxGT("Filament auswerfen")
- #define MSG_MMU2_EJECT_FILAMENT0 _UxGT("Filament 1 auswerfen")
- #define MSG_MMU2_EJECT_FILAMENT1 _UxGT("Filament 2 auswerfen")
- #define MSG_MMU2_EJECT_FILAMENT2 _UxGT("Filament 3 auswerfen")
- #define MSG_MMU2_EJECT_FILAMENT3 _UxGT("Filament 4 auswerfen")
- #define MSG_MMU2_EJECT_FILAMENT4 _UxGT("Filament 5 auswerfen")
- #define MSG_MMU2_UNLOAD_FILAMENT MSG_FILAMENTUNLOAD
- #define MSG_MMU2_LOADING_FILAMENT _UxGT("Lade Fila. %i...")
- #define MSG_MMU2_EJECTING_FILAMENT _UxGT("Fila. auswerfen...")
- #define MSG_MMU2_UNLOADING_FILAMENT _UxGT("Fila. entladen...")
- #define MSG_MMU2_ALL _UxGT("Alle")
- #define MSG_MMU2_FILAMENT0 _UxGT("Filament 1")
- #define MSG_MMU2_FILAMENT1 _UxGT("Filament 2")
- #define MSG_MMU2_FILAMENT2 _UxGT("Filament 3")
- #define MSG_MMU2_FILAMENT3 _UxGT("Filament 4")
- #define MSG_MMU2_FILAMENT4 _UxGT("Filament 5")
- #define MSG_MMU2_RESET _UxGT("setz MMU zurück")
- #define MSG_MMU2_RESETTING _UxGT("MMU zurücksetzen...")
- #define MSG_MMU2_EJECT_RECOVER _UxGT("Entfernen, klicken")
-
- #define MSG_MIX _UxGT("Mix")
- #define MSG_MIX_COMPONENT _UxGT("Komponente")
- #define MSG_MIXER _UxGT("Mixer")
- #define MSG_GRADIENT _UxGT("Gradient") // equal Farbverlauf
- #define MSG_FULL_GRADIENT _UxGT("Volle Gradient")
- #define MSG_TOGGLE_MIX _UxGT("Mix umschalten")
- #define MSG_CYCLE_MIX _UxGT("Zyklus Mix")
- #define MSG_GRADIENT_MIX _UxGT("Gradient Mix")
- #define MSG_REVERSE_GRADIENT _UxGT("Umgekehrte Gradient")
- #define MSG_ACTIVE_VTOOL _UxGT("Aktives V-Tool")
- #define MSG_START_VTOOL _UxGT("V-Tool Start")
- #define MSG_END_VTOOL _UxGT("V-Tool Ende")
- #define MSG_GRADIENT_ALIAS _UxGT("V-Tool Alias")
- #define MSG_RESET_VTOOLS _UxGT("V-Tools Reseten")
- #define MSG_COMMIT_VTOOL _UxGT("V-Tool Mix sichern")
- #define MSG_VTOOLS_RESET _UxGT("V-Tools ist resetet")
- #define MSG_START_Z _UxGT("Z Start")
- #define MSG_END_Z _UxGT("Z End")
- #define MSG_BRICKOUT _UxGT("Brickout")
- #define MSG_INVADERS _UxGT("Invaders")
- #define MSG_SNAKE _UxGT("Sn4k3")
- #define MSG_MAZE _UxGT("Maze")
-
- //
- // Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen
- // ...oder 2 Zeilen auf einem 3-Zeilen-Display.
- #if LCD_HEIGHT >= 4
- #define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Knopf drücken um")
- #define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("Druck fortzusetzen")
- #define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parken...")
- #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den")
- #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des")
- #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels...")
- #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen")
- #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf drücken")
- #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("um fortzusetzen")
- #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um")
- #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen")
- #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf")
- #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("bitte warten...")
- #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf")
- #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme")
- #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments...")
- #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
- #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
- #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments...")
- #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Warte auf")
- #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Entladen des")
- #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("Filaments...")
- #define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Klicke um")
- #define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("die Fila-Entladung")
- #define MSG_FILAMENT_CHANGE_CONT_PURGE_3 _UxGT("zu beenden")
- #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
- #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzen des")
- #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Drucks...")
- #else // LCD_HEIGHT < 4
- #define MSG_ADVANCED_PAUSE_WAITING_1 MSG_USERWAIT
- #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...")
- #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
- #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klick zum Heizen")
- #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")
- #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Entladen...")
- #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
- #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Entladen...")
- #define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Klick zum beenden")
- #define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("der Fila-Entladung")
- #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")
- #endif // LCD_HEIGHT < 4
-
- #define MSG_TMC_DRIVERS _UxGT("TMC Treiber") // Max length 18 characters
- #define MSG_TMC_CURRENT _UxGT("Treiber Strom")
- #define MSG_TMC_HYBRID_THRS _UxGT("Hybrid threshold")
- #define MSG_TMC_HOMING_THRS _UxGT("Sensorloses Homing")
- #define MSG_TMC_STEPPING_MODE _UxGT("Schrittmodus")
- #define MSG_TMC_STEALTH_ENABLED _UxGT("StealthChop einsch.")
- #define MSG_SERVICE_RESET _UxGT("Reset")
- #define MSG_SERVICE_IN _UxGT(" im:")
- #define MSG_BACKLASH _UxGT("Spiel")
- #define MSG_BACKLASH_CORRECTION _UxGT("Korrektur")
- #define MSG_BACKLASH_SMOOTHING _UxGT("Glätten")
|