123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- /**
- * Azteeg X5 GT pin assignments
- */
-
- #ifndef TARGET_LPC1768
- #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
- #endif
-
- #ifndef BOARD_NAME
- #define BOARD_NAME "Azteeg X5 GT"
- #define DEFAULT_WEBSITE_URL "https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm"
- #endif
-
- //
- // Limit Switches
- //
-
- #define X_MIN_PIN P1_24
- #define X_MAX_PIN P1_27
- #define Y_MIN_PIN P1_25
- #define Y_MAX_PIN P1_28
- #define Z_MIN_PIN P1_26
- #define Z_MAX_PIN P1_29
-
-
- //
- // Steppers
- //
- #define X_STEP_PIN P2_01
- #define X_DIR_PIN P0_11
- #define X_ENABLE_PIN P0_10
-
- #define Y_STEP_PIN P2_02
- #define Y_DIR_PIN P0_20
- #define Y_ENABLE_PIN P0_19
-
- #define Z_STEP_PIN P2_03
- #define Z_DIR_PIN P0_22
- #define Z_ENABLE_PIN P0_21
-
- #define E0_STEP_PIN P2_00
- #define E0_DIR_PIN P0_05
- #define E0_ENABLE_PIN P0_04
-
- #define E1_STEP_PIN P2_08
- #define E1_DIR_PIN P2_13
- #define E1_ENABLE_PIN P4_29
-
- //
- // Temperature Sensors
- // 3.3V max when defined as an analog input
- //
- #define TEMP_BED_PIN 0 // A0 (TH1)
- #define TEMP_0_PIN 1 // A1 (TH2)
- #define TEMP_1_PIN 2 // A2 (TH3)
-
-
- //
- // Heaters / Fans
- //
-
- #define HEATER_BED_PIN P2_07
- #define HEATER_0_PIN P2_04
- #define HEATER_1_PIN P2_05
- #define FAN_PIN P0_26
- #define FAN1_PIN P1_22
-
- //
- // Display
- //
-
- #if ENABLED(VIKI2) || ENABLED(miniVIKI)
- #define BEEPER_PIN P1_30
- #define DOGLCD_A0 P2_06
- #define DOGLCD_CS P0_16
-
- #define BTN_EN1 P3_25
- #define BTN_EN2 P3_26
- #define BTN_ENC P2_11
-
- #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
-
- #define KILL_PIN -1
-
- #define STAT_LED_RED_PIN P0_26
- #define STAT_LED_BLUE_PIN P1_21
- #endif
-
- //
- // Servo
- //
- #define SERVO0_PIN P1_23
|