123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141 |
- /**
- * Danish
- *
- * LCD Menu Messages
- * See also documentation/LCDLanguageFont.md
- *
- */
- #ifndef LANGUAGE_DA_H
- #define LANGUAGE_DA_H
-
- #define MAPPER_C2C3
- // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
- //#define SIMULATE_ROMFONT
- #define DISPLAY_CHARSET_ISO10646_1
-
- #define MSG_MAIN "Menu"
- #define WELCOME_MSG MACHINE_NAME " er klar"
- #define MSG_SD_INSERTED "Kort isat"
- #define MSG_SD_REMOVED "Kort fjernet"
- #define MSG_AUTOSTART "Autostart"
- #define MSG_AUTO_HOME "Home" // G28
- #define MSG_COOLDOWN "Afkøl"
- #define MSG_DISABLE_STEPPERS "Slå stepper fra"
- #define MSG_SET_HOME_OFFSETS "Sæt home offsets"
- #define MSG_SET_ORIGIN "Sæt origin"
- #define MSG_SWITCH_PS_ON "Slå strøm til"
- #define MSG_SWITCH_PS_OFF "Slå strøm fra"
- #define MSG_PREHEAT_PLA "Forvarm PLA"
- #define MSG_PREHEAT_PLA_N "Forvarm PLA "
- #define MSG_PREHEAT_PLA_ALL "Forvarm PLA Alle"
- #define MSG_PREHEAT_PLA_BEDONLY "Forvarm PLA Bed"
- #define MSG_PREHEAT_PLA_SETTINGS "Forvarm PLA conf"
- #define MSG_PREHEAT_ABS "Forvarm ABS"
- #define MSG_PREHEAT_ABS_N "Forvarm ABS "
- #define MSG_PREHEAT_ABS_ALL "Forvarm ABS Alle"
- #define MSG_PREHEAT_ABS_BEDONLY "Forvarm ABS Bed"
- #define MSG_PREHEAT_ABS_SETTINGS "Forvarm ABS conf"
- #define MSG_EXTRUDE "Extruder"
- #define MSG_RETRACT "Retract"
- #define MSG_MOVE_AXIS "Flyt akser"
- #define MSG_MOVE_X "Flyt X"
- #define MSG_MOVE_Y "Flyt Y"
- #define MSG_MOVE_Z "Flyt Z"
- #define MSG_MOVE_E "Extruder"
- #define MSG_MOVE_01MM "Flyt 0.1mm"
- #define MSG_MOVE_1MM "Flyt 1mm"
- #define MSG_MOVE_10MM "Flyt 10mm"
- #define MSG_SPEED "Hastighed"
- #define MSG_NOZZLE "Dyse"
- #define MSG_NOZZLE1 "Dyse2"
- #define MSG_NOZZLE2 "Dyse3"
- #define MSG_BED "Plade"
- #define MSG_FAN_SPEED "Blæser hastighed"
- #define MSG_FLOW "Flow"
- #define MSG_CONTROL "Kontrol"
- #define MSG_MIN " \002 Min"
- #define MSG_MAX " \002 Max"
- #define MSG_FACTOR " \002 Fact"
- #define MSG_AUTOTEMP "Autotemp"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P "PID-P"
- #define MSG_PID_I "PID-I"
- #define MSG_PID_D "PID-D"
- #define MSG_PID_C "PID-C"
- #define MSG_ACC "Accel"
- #define MSG_VXY_JERK "Vxy-jerk"
- #define MSG_VZ_JERK "Vz-jerk"
- #define MSG_VE_JERK "Ve-jerk"
- #define MSG_VMAX "Vmax "
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "Vmin"
- #define MSG_VTRAV_MIN "VTrav min"
- #define MSG_AMAX "Amax "
- #define MSG_A_RETRACT "A-retract"
- #define MSG_XSTEPS "Xsteps/mm"
- #define MSG_YSTEPS "Ysteps/mm"
- #define MSG_ZSTEPS "Zsteps/mm"
- #define MSG_ESTEPS "Esteps/mm"
- #define MSG_TEMPERATURE "Temperatur"
- #define MSG_MOTION "Motion"
- #define MSG_VOLUMETRIC "Filament"
- #define MSG_VOLUMETRIC_ENABLED "E in mm3"
- #define MSG_FILAMENT_DIAM "Fil. Dia."
- #define MSG_CONTRAST "LCD kontrast"
- #define MSG_STORE_EPROM "Gem i EEPROM"
- #define MSG_LOAD_EPROM "Hent fra EEPROM"
- #define MSG_RESTORE_FAILSAFE "Gendan failsafe"
- #define MSG_REFRESH "Genopfrisk"
- #define MSG_WATCH "Info skærm"
- #define MSG_PREPARE "Forbered"
- #define MSG_TUNE "Tune"
- #define MSG_PAUSE_PRINT "Pause printet"
- #define MSG_RESUME_PRINT "Forsæt printet"
- #define MSG_STOP_PRINT "Stop printet"
- #define MSG_CARD_MENU "Print fra SD"
- #define MSG_NO_CARD "Intet SD kort"
- #define MSG_DWELL "Dvale..."
- #define MSG_USERWAIT "Venter på bruger..."
- #define MSG_RESUMING "Forsætter printet"
- #define MSG_PRINT_ABORTED "Print annuleret"
- #define MSG_NO_MOVE "No move."
- #define MSG_KILLED "KILLED. "
- #define MSG_STOPPED "STOPPED. "
- #define MSG_CONTROL_RETRACT "Tilbagetraek mm"
- #define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm"
- #define MSG_CONTROL_RETRACTF "Tilbagetræk V"
- #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
- #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
- #define MSG_AUTORETRACT "AutoRetr."
- #define MSG_ZPROBE_OUT "Probe udenfor plade"
- #define MSG_FILAMENTCHANGE "Skift filament"
- #define MSG_INIT_SDCARD "Init. SD card"
- #define MSG_CNG_SDCARD "Skift SD kort"
- #define MSG_POSITION_UNKNOWN "Home X/Y før Z"
- #define MSG_ZPROBE_ZOFFSET "Z Offset"
- #define MSG_BABYSTEP_X "Babystep X"
- #define MSG_BABYSTEP_Y "Babystep Y"
- #define MSG_BABYSTEP_Z "Babystep Z"
- #define MSG_END_HOUR "Timer"
- #define MSG_END_MINUTE "Minutter"
- #define MSG_HEATING "Opvarmer..."
- #define MSG_HEATING_COMPLETE "Opvarmet"
- #define MSG_BED_HEATING "Opvarmer plade"
- #define MSG_BED_DONE "Plade opvarmet"
- #define MSG_ENDSTOP_ABORT "Endstop abort"
-
- #ifdef DELTA_CALIBRATION_MENU
- #define MSG_DELTA_CALIBRATE "Delta Kalibrering"
- #define MSG_DELTA_CALIBRATE_X "Kalibrer X"
- #define MSG_DELTA_CALIBRATE_Y "Kalibrer Y"
- #define MSG_DELTA_CALIBRATE_Z "Kalibrer Z"
- #define MSG_DELTA_CALIBRATE_CENTER "Kalibrerings Center"
- #endif // DELTA_CALIBRATION_MENU
-
- #endif // LANGUAGE_DA_H
|