1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- /**
- * Brainwave Pro pin assignments (AT90USB1286)
- *
- * Requires hardware bundle for Arduino:
- * https://github.com/unrepentantgeek/brainwave-arduino
- */
-
- #ifndef __AVR_AT90USB1286__
- #error "Oops! Make sure you have 'Brainwave Pro' selected from the 'Tools -> Boards' menu."
- #endif
-
- #include "fastio.h"
-
- #ifndef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical.
- #error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
- #endif
-
- #define BOARD_NAME "Brainwave Pro"
-
- #define LARGE_FLASH true
-
- #define X_STEP_PIN 33
- #define X_DIR_PIN 32
- #define X_ENABLE_PIN 11
- #define X_STOP_PIN 47
-
- #define Y_STEP_PIN 31
- #define Y_DIR_PIN 30
- #define Y_ENABLE_PIN 8
- #define Y_STOP_PIN 18
-
- #define Z_STEP_PIN 29
- #define Z_DIR_PIN 28
- #define Z_ENABLE_PIN 37
- #define Z_MAX_PIN 36
- #define Z_MIN_PROBE_PIN 17 // Bed Z probe
-
- #define E0_STEP_PIN 35
- #define E0_DIR_PIN 34
- #define E0_ENABLE_PIN 13
-
- #define HEATER_0_PIN 15
- #define HEATER_BED_PIN 14 // Bed
- #define FAN_PIN 16 // Fan, PWM
-
- #define TEMP_0_PIN 2 // Extruder / Analog pin numbering
- #define TEMP_1_PIN 1 // Spare / Analog pin numbering
- #define TEMP_BED_PIN 0 // Bed / Analog pin numbering
-
- #define SDSS 20
- #define LED_PIN 19
- #define SD_DETECT_PIN 12
|