marlin/Marlin/dogm_lcd_implementation.h

/**
 *dogm_lcd_implementation.h
 *
 *Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
 *Demonstrator: http://www.reprap.org/wiki/STB_Electronics
 *License: http://opensource.org/licenses/BSD-3-Clause
 *
 *With the use of:
 *u8glib by Oliver Kraus
 *http://code.google.com/p/u8glib/
 *License: http://opensource.org/licenses/BSD-3-Clause
 */


#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H
#define ULTRA_LCD_IMPLEMENTATION_DOGM_H

/**
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
**/


// CHANGE_DE begin ***
#include <U8glib.h>	// DE_U8glib
#include "DOGMbitmaps.h"
#include "ultralcd.h"


/* Russian language not supported yet, needs custom font

#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
#include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal
#endif
*/

// DOGM parameters (size in pixels)
#define DOG_CHAR_WIDTH			6
#define DOG_CHAR_HEIGHT			12
#define DOG_CHAR_WIDTH_LARGE	9
#define DOG_CHAR_HEIGHT_LARGE	18


#define START_ROW				0


/* Custom characters defined in font font_6x10_marlin.c */
#define LCD_STR_BEDTEMP     "\xFE"
#define LCD_STR_DEGREE      "\xB0"
#define LCD_STR_THERMOMETER "\xFF"
#define LCD_STR_UPLEVEL     "\xFB"
#define LCD_STR_REFRESH     "\xF8"
#define LCD_STR_FOLDER      "\xF9"
#define LCD_STR_FEEDRATE    "\xFD"
#define LCD_STR_CLOCK       "\xFC"
#define LCD_STR_ARROW_RIGHT "\xFA"

#define FONT_STATUSMENU	u8g_font_6x9


// LCD selection
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);	// HW-SPI Com: CS, A0

static void lcd_implementation_init()
{
	//  Uncomment this if you have the first generation (V1.10) of STBs board
	//  pinMode(17, OUTPUT);	// Enable LCD backlight
	//  digitalWrite(17, HIGH);
	
	u8g.firstPage();
	do {
		u8g.setFont(u8g_font_6x10_marlin);
		u8g.setColorIndex(1);
		u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
		u8g.setColorIndex(1);
	   } while( u8g.nextPage() );

#ifdef LCD_SCREEN_ROT_90
	u8g.setRot90();	// Rotate screen by 90°
#endif

#ifdef LCD_SCREEN_ROT_180;
	u8g.setRot180();	// Rotate screen by 180°
#endif

#ifdef LCD_SCREEN_ROT_270;
	u8g.setRot270();	// Rotate screen by 270°
#endif

   
	u8g.firstPage();
	do {
			// RepRap init bmp
			u8g.drawBitmapP(0,0,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
			// Welcome message
			u8g.setFont(u8g_font_6x10_marlin);
			u8g.drawStr(62,10,"MARLIN"); 
			u8g.setFont(u8g_font_5x8);
			u8g.drawStr(62,19,"V1.0.0 RC2");
			u8g.setFont(u8g_font_6x10_marlin);
			u8g.drawStr(62,28,"by ErikZalm");
			u8g.drawStr(62,41,"DOGM128 LCD");
			u8g.setFont(u8g_font_5x8);
			u8g.drawStr(62,48,"enhancements");
			u8g.setFont(u8g_font_5x8);
			u8g.drawStr(62,55,"by STB");
			u8g.drawStr(62,61,"uses u");
			u8g.drawStr90(92,57,"8");
			u8g.drawStr(100,61,"glib");
	   } while( u8g.nextPage() );
}

static void lcd_implementation_clear()
{
	u8g.firstPage();
	do {	
			u8g.setColorIndex(0);
			u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
			u8g.setColorIndex(1);
		} while( u8g.nextPage() );
}

/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
static void lcd_printPGM(const char* str)
{
    char c;
    while((c = pgm_read_byte(str++)) != '\0')
    {
			u8g.print(c);
    }
}


static void lcd_implementation_status_screen()
{

 static unsigned char fan_rot = 0;
 
 u8g.setColorIndex(1);	// black on white
 
 // Symbols menu graphics, animated fan
 if ((blink % 2) &&  fanSpeed )	u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT,status_screen0_bmp);
	else u8g.drawBitmapP(9,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT,status_screen1_bmp);
 
 #ifdef SDSUPPORT
 //SD Card Symbol
 u8g.drawBox(42,42,8,7);
 u8g.drawBox(50,44,2,5);
 u8g.drawFrame(42,49,10,4);
 u8g.drawPixel(50,43);
 // Progress bar
 u8g.drawFrame(54,49,73,4);
 
 // SD Card Progress bar and clock
 u8g.setFont(FONT_STATUSMENU);
 
 if (IS_SD_PRINTING)
   {
	// Progress bar
	u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
   }
    else {
			// do nothing
		 }
 
 u8g.setPrintPos(80,47);
 if(starttime != 0)
    {
        uint16_t time = millis()/60000 - starttime/60000;

		u8g.print(itostr2(time/60));
		u8g.print(':');
		u8g.print(itostr2(time%60));
    }else{
			lcd_printPGM(PSTR("--:--"));
		 }
 #endif
 
 // Extruder 1
 u8g.setFont(FONT_STATUSMENU);
 u8g.setPrintPos(6,6);
 u8g.print(itostr3(int(degTargetHotend(0) + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 u8g.setPrintPos(6,27);
 u8g.print(itostr3(int(degHotend(0) + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 if (!isHeatingHotend(0)) u8g.drawBox(13,17,2,2);
	else
		{
		 u8g.setColorIndex(0);	// white on black
		 u8g.drawBox(13,17,2,2);
		 u8g.setColorIndex(1);	// black on white
		}
 
 // Extruder 2
 u8g.setFont(FONT_STATUSMENU);
 #if EXTRUDERS > 1
 u8g.setPrintPos(31,6);
 u8g.print(itostr3(int(degTargetHotend(1) + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 u8g.setPrintPos(31,27);
 u8g.print(itostr3(int(degHotend(1) + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 if (!isHeatingHotend(1)) u8g.drawBox(38,17,2,2);
	else
		{
		 u8g.setColorIndex(0);	// white on black
		 u8g.drawBox(38,17,2,2);
		 u8g.setColorIndex(1);	// black on white
		}
 #else
 u8g.setPrintPos(31,27);
 u8g.print("---");
 #endif
 
 // Extruder 3
 u8g.setFont(FONT_STATUSMENU);
 # if EXTRUDERS > 2
 u8g.setPrintPos(55,6);
 u8g.print(itostr3(int(degTargetHotend(2) + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 u8g.setPrintPos(55,27);
 u8g.print(itostr3(int(degHotend(2) + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 if (!isHeatingHotend(2)) u8g.drawBox(62,17,2,2);
	else
		{
		 u8g.setColorIndex(0);	// white on black
		 u8g.drawBox(62,17,2,2);
		 u8g.setColorIndex(1);	// black on white
		}
 #else
 u8g.setPrintPos(55,27);
 u8g.print("---");
 #endif
 
 // Heatbed
 u8g.setFont(FONT_STATUSMENU);
 u8g.setPrintPos(81,6);
 u8g.print(itostr3(int(degTargetBed() + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 u8g.setPrintPos(81,27);
 u8g.print(itostr3(int(degBed() + 0.5)));
 lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
 if (!isHeatingBed()) u8g.drawBox(88,18,2,2);
	else
		{
		 u8g.setColorIndex(0);	// white on black
		 u8g.drawBox(88,18,2,2);
		 u8g.setColorIndex(1);	// black on white
		}
 
 // Fan
 u8g.setFont(FONT_STATUSMENU);
 u8g.setPrintPos(104,27);
 #if FAN_PIN > 0
 u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
 u8g.print("%");
 #else
 u8g.print("---");
 #endif
 
 
 // X, Y, Z-Coordinates
 u8g.setFont(FONT_STATUSMENU);
 u8g.drawBox(0,29,128,10);
 u8g.setColorIndex(0);	// white on black
 u8g.setPrintPos(2,37);
 u8g.print("X");
 u8g.drawPixel(8,33);
 u8g.drawPixel(8,35);
 u8g.setPrintPos(10,37);
 u8g.print(ftostr31ns(current_position[X_AXIS]));
 u8g.setPrintPos(43,37);
 lcd_printPGM(PSTR("Y"));
 u8g.drawPixel(49,33);
 u8g.drawPixel(49,35);
 u8g.setPrintPos(51,37);
 u8g.print(ftostr31ns(current_position[Y_AXIS]));
 u8g.setPrintPos(83,37);
 u8g.print("Z");
 u8g.drawPixel(89,33);
 u8g.drawPixel(89,35);
 u8g.setPrintPos(91,37);
 u8g.print(ftostr31(current_position[Z_AXIS]));
 u8g.setColorIndex(1);	// black on white
 
 // Feedrate
 u8g.setFont(u8g_font_6x10_marlin);
 u8g.setPrintPos(3,49);
 u8g.print(LCD_STR_FEEDRATE[0]);
 u8g.setFont(FONT_STATUSMENU);
 u8g.setPrintPos(12,48);
 u8g.print(itostr3(feedmultiply));
 u8g.print('%');

 // Status line
 u8g.setFont(FONT_STATUSMENU);
 u8g.setPrintPos(0,61);
 u8g.print(lcd_status_message);

}

static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
{
    char c;
    
    uint8_t n = LCD_WIDTH - 1 - 2;
		
		if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] ))
		   {
			u8g.setColorIndex(1);		// black on white
			u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
			u8g.setColorIndex(0);		// following text must be white on black
		   } else u8g.setColorIndex(1); // unmarked text is black on white
		
		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
		if (pre_char != '>') u8g.print(pre_char); else u8g.print(' ');	// Row selector is obsolete


    while( (c = pgm_read_byte(pstr)) != '\0' )
    {
		u8g.print(c);
        pstr++;
        n--;
    }
    while(n--){
					u8g.print(' ');
		}
	   
		u8g.print(post_char);
		u8g.print(' ');
		u8g.setColorIndex(1);		// restore settings to black on white
}

static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
{
    static unsigned int fkt_cnt = 0;
	char c;
    uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
		
		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
		u8g.print(pre_char);
	
    while( (c = pgm_read_byte(pstr)) != '\0' )
    {
			u8g.print(c);
		
        pstr++;
        n--;
    }
	
		u8g.print(':');

    while(n--){
					u8g.print(' ');
			  }

		u8g.print(data);
}

static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
{
    char c;
    uint8_t n= LCD_WIDTH - 1 - 2 - strlen_P(data);

		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
		u8g.print(pre_char);
	
    while( (c = pgm_read_byte(pstr)) != '\0' )
    {
			u8g.print(c);
		
        pstr++;
        n--;
    }

		u8g.print(':');
	
    while(n--){
					u8g.print(' ');
			  }

		lcd_printPGM(data);
}

#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))

void lcd_implementation_drawedit(const char* pstr, char* value)
{
		u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
		u8g.setFont(u8g_font_9x18);
		lcd_printPGM(pstr);
		u8g.print(':');
		u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
		u8g.print(value);
}

static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
    char c;
    uint8_t n = LCD_WIDTH - 1;

    if (longFilename[0] != '\0')
    {
        filename = longFilename;
        longFilename[LCD_WIDTH-1] = '\0';
    }

		u8g.setColorIndex(1);		// black on white
		u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
		u8g.setColorIndex(0);		// following text must be white on black
		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
		u8g.print(' ');	// Indent by 1 char
	   
    while((c = *filename) != '\0')
    {
		u8g.print(c);
        filename++;
        n--;
    }
    while(n--){
					u8g.print(' ');
			   }
	u8g.setColorIndex(1);		// black on white
}

static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
    char c;
    uint8_t n = LCD_WIDTH - 1;

    if (longFilename[0] != '\0')
    {
        filename = longFilename;
        longFilename[LCD_WIDTH-1] = '\0';
    }

		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
		u8g.print(' ');
		
while((c = *filename) != '\0')
    {
			u8g.print(c);
		
        filename++;
        n--;
    }
    while(n--){
					u8g.print(' ');
			   }

}

static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
    char c;
    uint8_t n = LCD_WIDTH - 2;
		
    if (longFilename[0] != '\0')
    {
        filename = longFilename;
        longFilename[LCD_WIDTH-2] = '\0';
    }
		u8g.setColorIndex(1);		// black on white
		u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
		u8g.setColorIndex(0);		// following text must be white on black
		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
		u8g.print(' ');	// Indent by 1 char
		u8g.print(LCD_STR_FOLDER[0]);		
	   
    while((c = *filename) != '\0')
    {
			u8g.print(c);
		
        filename++;
        n--;
    }
    while(n--){
					u8g.print(' ');
			   }
	u8g.setColorIndex(1);		// black on white
}

static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
    char c;
    uint8_t n = LCD_WIDTH - 2;

    if (longFilename[0] != '\0')
    {
        filename = longFilename;
        longFilename[LCD_WIDTH-2] = '\0';
    }

		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
		u8g.print(' ');
		u8g.print(LCD_STR_FOLDER[0]);

    while((c = *filename) != '\0')
    {
			u8g.print(c);
		
        filename++;
        n--;
    }
    while(n--){
					u8g.print(' ');
			   }
}

#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')

static void lcd_implementation_quick_feedback()
{

#if BEEPER > -1
    SET_OUTPUT(BEEPER);
    for(int8_t i=0;i<10;i++)
    {
		WRITE(BEEPER,HIGH);
		delay(3);
		WRITE(BEEPER,LOW);
		delay(3);
    }
#endif
}
#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H