My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

RRD Full Graphic Smart Controller.md 1.5KB

RepRap Discount Full Graphics Smart Controller

Many MKS products have the EXP1 & EXP2 LCD connectors rotated 180 degrees from the ones on the RepRap LCD controllers. So there are three options for connecting the RepRap Discount Full Graphic Smart Controller:

  1. Slice, file, or grind the key off one end of the cables and plug the cables in backwards.
  2. Carefully pry the plastic housings off the board or controller, rotate them 180 degrees, and press them back onto the board.
  3. Make custom cables with one end’s connector rotated 180 degrees.

3 DEC 2017

The current Marlin 2.0.x firmware can’t access some of the pins on the EXP2 connector. A custom cable that gets three of the signals from a different connector is required to use the RepRap Discount Full Graphic Smart Controller. Use that cable to move the following connections:

From|To --|-- P0.8|J8-3 P0.7|J8-2 P0.5|J8-4

If using pins other than the J8 pins listed above the spi_pins.h file will need to be modified.

An octopus cable like the Adafruit 1199 10-pin IDC Socket Rainbow Breakout Cable can simplify the construction of the custom cable. Just plug the Adafruit 1199 into one of the cables that came with the LCD and the individual pins into J8 and EXP2 as needed.


27 APR 2018

For a functional SD_DETECT_PIN, also move the following pin:

From|To --|-- P0.27|J8-5

If a different pin is used, modify the pins_MKS_SBASE.h file.