My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.

pins_MINITRONICS.h 3.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Minitronics v1.0/1.1 pin assignments
  24. */
  25. #ifndef __AVR_ATmega1281__
  26. #error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #if HOTENDS > 2
  29. #error "Minitronics supports up to 2 hotends. Comment this line to keep going."
  30. #endif
  31. #define BOARD_NAME "Minitronics v1.0 / v1.1"
  32. #define LARGE_FLASH true
  33. //
  34. // Limit Switches
  35. //
  36. #define X_MIN_PIN 5
  37. #define X_MAX_PIN 2
  38. #define Y_MIN_PIN 2
  39. #define Y_MAX_PIN 15
  40. #define Z_MIN_PIN 6
  41. #define Z_MAX_PIN -1
  42. //
  43. // Steppers
  44. //
  45. #define X_STEP_PIN 48
  46. #define X_DIR_PIN 47
  47. #define X_ENABLE_PIN 49
  48. #define Y_STEP_PIN 39 // A6
  49. #define Y_DIR_PIN 40 // A0
  50. #define Y_ENABLE_PIN 38
  51. #define Z_STEP_PIN 42 // A2
  52. #define Z_DIR_PIN 43 // A6
  53. #define Z_ENABLE_PIN 41 // A1
  54. #define E0_STEP_PIN 45
  55. #define E0_DIR_PIN 44
  56. #define E0_ENABLE_PIN 27
  57. #define E1_STEP_PIN 36
  58. #define E1_DIR_PIN 35
  59. #define E1_ENABLE_PIN 37
  60. //
  61. // Temperature Sensors
  62. //
  63. #define TEMP_0_PIN 7 // Analog Input
  64. #define TEMP_1_PIN 6 // Analog Input
  65. #define TEMP_BED_PIN 6 // Analog Input
  66. //
  67. // Heaters / Fans
  68. //
  69. #define HEATER_0_PIN 7 // EXTRUDER 1
  70. #define HEATER_1_PIN 8 // EXTRUDER 2
  71. #define HEATER_BED_PIN 3 // BED
  72. #define FAN_PIN 9
  73. //
  74. // Misc. Functions
  75. //
  76. #define SDSS 16
  77. #define LED_PIN 46
  78. //
  79. // LCD / Controller
  80. //
  81. #define BEEPER_PIN -1
  82. #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  83. #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
  84. #define LCD_PINS_ENABLE 11 // SID (MOSI)
  85. #define LCD_PINS_D4 10 // SCK (CLK) clock
  86. #define BTN_EN1 18
  87. #define BTN_EN2 17
  88. #define BTN_ENC 25
  89. #define SD_DETECT_PIN 30
  90. #else
  91. #define LCD_PINS_RS -1
  92. #define LCD_PINS_ENABLE -1
  93. #define LCD_PINS_D4 -1
  94. #define LCD_PINS_D5 -1
  95. #define LCD_PINS_D6 -1
  96. #define LCD_PINS_D7 -1
  97. // Buttons are directly attached using keypad
  98. #define BTN_EN1 -1
  99. #define BTN_EN2 -1
  100. #define BTN_ENC -1
  101. #define SD_DETECT_PIN -1 // Minitronics doesn't use this
  102. #endif