123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * lcd/dogm/marlinui_DOGM.h
- */
-
- #include "../../inc/MarlinConfigPre.h"
-
- #include <U8glib-HAL.h>
- #include "HAL_LCD_class_defines.h"
-
- //#define ALTERNATIVE_LCD
-
- #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-
- // RepRapWorld Graphical LCD
-
- #define U8G_CLASS U8GLIB_ST7920_128X64_4X
- #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_ENABLE == SD_MOSI_PIN)
- #define U8G_PARAM LCD_PINS_RS
- #else
- #define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS
- #endif
-
- #elif IS_U8GLIB_ST7920
-
- // RepRap Discount Full Graphics Smart Controller
- // and other variant LCDs using ST7920
-
- #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_ENABLE == SD_MOSI_PIN)
- #define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL // 2 stripes, HW SPI (Shared with SD card. Non-standard LCD adapter on AVR.)
- #define U8G_PARAM LCD_PINS_RS
- #else
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_ST7920_128X64_4X // 2 stripes, SW SPI (Original u8glib device)
- #else
- #define U8G_CLASS U8GLIB_ST7920_128X64_RRD // Adjust stripes with PAGE_HEIGHT in ultralcd_st7920_u8glib_rrd.h
- #endif
- #define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS // AVR version ignores these pin settings
- // HAL version uses these pin settings
- #endif
-
- #elif ENABLED(CARTESIO_UI)
-
- // CartesioUI LCD
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_DOGM128_2X // 4 stripes
- #define FORCE_SOFT_SPI // SW-SPI
- #else
- #define U8G_CLASS U8GLIB_DOGM128_2X // 4 stripes (HW-SPI)
- #endif
-
- #elif IS_U8GLIB_LM6059_AF
-
- // Based on the Adafruit ST7565 (https://www.adafruit.com/products/250)
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_LM6059 // 8 stripes (HW-SPI)
- #else
- #define U8G_CLASS U8GLIB_LM6059_2X // 4 stripes (HW-SPI)
- #endif
-
- #elif IS_U8GLIB_ST7565_64128N
-
- // MaKrPanel, Mini Viki, Viki 2.0, AZSMZ 12864 ST7565 controller
-
- #define SMART_RAMPS MB(RAMPS_SMART_EFB, RAMPS_SMART_EEB, RAMPS_SMART_EFF, RAMPS_SMART_EEF, RAMPS_SMART_SF)
- #define U8G_CLASS U8GLIB_64128N_2X_HAL // 4 stripes (HW-SPI)
-
- #if (SMART_RAMPS && defined(__SAM3X8E__)) || DOGLCD_SCK != SD_SCK_PIN || DOGLCD_MOSI != SD_MOSI_PIN
- #define FORCE_SOFT_SPI // SW-SPI
- #endif
-
- #elif ANY(FYSETC_MINI_12864, MKS_MINI_12864, ENDER2_STOCKDISPLAY)
-
- // The FYSETC Mini 12864 display // "4 stripes"
-
- // The MKS_MINI_12864 V1/V2 aren't exact copies of the MiniPanel.
- // Panel management is in u8g_dev_uc1701_mini12864_HAL.cpp with
- // extra delays added to remove glitches seen with fast MCUs.
-
- #define U8G_CLASS U8GLIB_MINI12864_2X_HAL // 8 stripes (HW-SPI)
-
- #elif ENABLED(MINIPANEL)
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_MINI12864
- #else
- #define U8G_CLASS U8GLIB_MINI12864_2X // 8 stripes (HW-SPI)
- #endif
-
- #elif ENABLED(MKS_12864OLED_SSD1306)
-
- // MKS 128x64 (SSD1306) OLED I2C LCD
-
- #define FORCE_SOFT_SPI // SW-SPI
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_SSD1306_128X64_2X // 4 stripes
- #else
- #define U8G_CLASS U8GLIB_SSD1306_128X64 // 8 stripes
- #endif
-
- #elif EITHER(FYSETC_242_OLED_12864, K3D_242_OLED_CONTROLLER)
-
- // FYSETC OLED 2.42" 128 × 64 Full Graphics Controller
- // or K3D OLED 2.42" 128 × 64 Full Graphics Controller
-
- #define FORCE_SOFT_SPI // SW-SPI
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_SSD1306_128X64_2X // 4 stripes
- #else
- #define U8G_CLASS U8GLIB_SSD1309_128X64_HAL
- #endif
-
- #elif ENABLED(ZONESTAR_12864OLED_SSD1306)
-
- // Zonestar SSD1306 OLED SPI LCD
-
- #define FORCE_SOFT_SPI // SW-SPI
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_SH1306_128X64_2X // 4 stripes
- #else
- #define U8G_CLASS U8GLIB_SH1306_128X64 // 8 stripes
- #endif
-
- #elif EITHER(MKS_12864OLED, ZONESTAR_12864OLED)
-
- // MKS 128x64 (SH1106) OLED I2C LCD
- // - or -
- // Zonestar SH1106 OLED SPI LCD
-
- #define FORCE_SOFT_SPI // SW-SPI
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_SH1106_128X64_2X // 4 stripes
- #else
- #define U8G_CLASS U8GLIB_SH1106_128X64 // 8 stripes
- #endif
-
- #elif ENABLED(U8GLIB_SH1106_EINSTART)
-
- // Connected via motherboard header
-
- #define U8G_CLASS U8GLIB_SH1106_128X64
- #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS
-
- #elif ENABLED(U8GLIB_SH1106)
-
- // Generic SH1106 OLED I2C LCD
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_SH1106_128X64_2X_I2C_2_WIRE // 4 stripes
- #else
- #define U8G_CLASS U8GLIB_SH1106_128X64_2X // 4 stripes
- #endif
- #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // I2C
-
- #elif ENABLED(U8GLIB_SSD1309)
-
- // Generic support for SSD1309 OLED I2C LCDs
-
- #define U8G_CLASS U8GLIB_SSD1309_128X64
- #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST) // I2C
-
- #elif ENABLED(U8GLIB_SSD1306)
-
- // Generic SSD1306 OLED I2C LCD
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_SSD1306_128X64_2X_I2C_2_WIRE // 4 stripes
- #else
- #define U8G_CLASS U8GLIB_SSD1306_128X64_2X // 4 stripes
- #endif
- #define U8G_PARAM (U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST)
-
- #elif TFT_SCALED_DOGLCD
-
- // Unspecified 320x240 TFT pre-initialized by built-in bootloader
-
- #define U8G_CLASS U8GLIB_TFT_320X240_UPSCALE_FROM_128X64
- #if HAS_FSMC_GRAPHICAL_TFT
- #define U8G_PARAM FSMC_CS_PIN, FSMC_RS_PIN
- #else
- #define U8G_PARAM -1, -1
- #endif
-
- #else
-
- #if ENABLED(ALTERNATIVE_LCD)
- #define U8G_CLASS U8GLIB_DOGM128 // 8 stripes (HW-SPI)
- #else
- #define U8G_CLASS U8GLIB_DOGM128_2X // 4 stripes (HW-SPI)
- #endif
-
- #endif
-
- // Use HW-SPI if no other option is specified
- #ifndef U8G_PARAM
- #if ENABLED(FORCE_SOFT_SPI)
- #define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // SW-SPI
- #else
- #define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // HW-SPI
- #endif
- #endif
-
- // For selective rendering within a Y range
- #define PAGE_OVER(ya) ((ya) <= u8g.getU8g()->current_page.y1) // Does the current page follow a region top?
- #define PAGE_UNDER(yb) ((yb) >= u8g.getU8g()->current_page.y0) // Does the current page precede a region bottom?
- #define PAGE_CONTAINS(ya, yb) ((yb) >= u8g.getU8g()->current_page.y0 && (ya) <= u8g.getU8g()->current_page.y1) // Do two vertical regions overlap?
-
- extern U8G_CLASS u8g;
|