123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
- //
- // Temperature Menu
- //
-
- #include "../../inc/MarlinConfig.h"
-
- #if HAS_LCD_MENU && HAS_TEMPERATURE
-
- #include "menu_item.h"
- #include "../../module/temperature.h"
-
- #if FAN_COUNT > 1 || ENABLED(SINGLENOZZLE)
- #include "../../module/motion.h"
- #endif
-
- #if ENABLED(SINGLENOZZLE)
- #include "../../module/tool_change.h"
- #endif
-
- //
- // "Temperature" submenu items
- //
-
- void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb) {
- #if HAS_HOTEND
- if (indh >= 0 && ui.material_preset[indh].hotend_temp > 0)
- setTargetHotend(_MIN(thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, ui.material_preset[indh].hotend_temp), e);
- #else
- UNUSED(e); UNUSED(indh);
- #endif
- #if HAS_HEATED_BED
- if (indb >= 0 && ui.material_preset[indb].bed_temp > 0) setTargetBed(ui.material_preset[indb].bed_temp);
- #else
- UNUSED(indb);
- #endif
- #if HAS_FAN
- set_fan_speed((
- #if FAN_COUNT > 1
- active_extruder < FAN_COUNT ? active_extruder :
- #endif
- 0), ui.material_preset[indh].fan_speed
- );
- #endif
- ui.return_to_status();
- }
-
- #if PREHEAT_COUNT
-
- #if HAS_TEMP_HOTEND
- inline void _preheat_end(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, -1); }
- #if HAS_HEATED_BED
- inline void _preheat_both(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, m); }
- #endif
- #endif
- #if HAS_HEATED_BED
- inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(-1, -1, m); }
- #endif
-
- #if HAS_TEMP_HOTEND && HAS_HEATED_BED
-
- // Indexed "Preheat ABC" and "Heat Bed" items
- #define PREHEAT_ITEMS(M,E) do{ \
- ACTION_ITEM_N_S(E, ui.get_preheat_label(M), MSG_PREHEAT_M_H, []{ _preheat_both(M, MenuItemBase::itemIndex); }); \
- ACTION_ITEM_N_S(E, ui.get_preheat_label(M), MSG_PREHEAT_M_END_E, []{ _preheat_end(M, MenuItemBase::itemIndex); }); \
- }while(0)
-
- #elif HAS_MULTI_HOTEND
-
- // No heated bed, so just indexed "Preheat ABC" items
- #define PREHEAT_ITEMS(M,E) ACTION_ITEM_N_S(E, ui.get_preheat_label(M), MSG_PREHEAT_M_H, []{ _preheat_end(M, MenuItemBase::itemIndex); })
-
- #endif
-
- void do_preheat_end_m() { _preheat_end(editable.int8, 0); }
-
- #if HAS_MULTI_HOTEND || HAS_HEATED_BED
-
- // Set editable.int8 to the Material index before entering this menu
- // because MenuItemBase::itemIndex will be re-used by PREHEAT_ITEMS
- void menu_preheat_m() {
- const uint8_t m = editable.int8; // Don't re-use 'editable' in this menu
-
- START_MENU();
- BACK_ITEM(MSG_TEMPERATURE);
-
- #if HOTENDS == 1
-
- #if HAS_HEATED_BED
- ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M, []{ _preheat_both(editable.int8, 0); });
- ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M_END, do_preheat_end_m);
- #else
- ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M, do_preheat_end_m);
- #endif
-
- #elif HAS_MULTI_HOTEND
-
- HOTEND_LOOP() PREHEAT_ITEMS(editable.int8, e);
- ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M_ALL, []() {
- TERN_(HAS_HEATED_BED, []{ _preheat_bed(editable.int8); });
- HOTEND_LOOP() thermalManager.setTargetHotend(ui.material_preset[editable.int8].hotend_temp, e);
- });
-
- #endif
-
- #if HAS_HEATED_BED
- ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M_BEDONLY, []{ _preheat_bed(editable.int8); });
- #endif
-
- END_MENU();
- }
-
- #endif // HAS_MULTI_HOTEND || HAS_HEATED_BED
-
- #endif // PREHEAT_COUNT
-
- #if HAS_TEMP_HOTEND || HAS_HEATED_BED
-
- void lcd_cooldown() {
- thermalManager.zero_fan_speeds();
- thermalManager.disable_all_heaters();
- ui.return_to_status();
- }
-
- #endif // HAS_TEMP_HOTEND || HAS_HEATED_BED
-
- void menu_temperature() {
- #if HAS_TEMP_HOTEND || HAS_HEATED_BED
- bool has_heat = false;
- #if HAS_TEMP_HOTEND
- HOTEND_LOOP() if (thermalManager.temp_hotend[HOTEND_INDEX].target) { has_heat = true; break; }
- #endif
- #endif
-
- START_MENU();
- BACK_ITEM(MSG_MAIN);
-
- //
- // Nozzle:
- // Nozzle [1-5]:
- //
- #if HOTENDS == 1
- EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(0); });
- #elif HAS_MULTI_HOTEND
- HOTEND_LOOP()
- EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.heater_maxtemp[e] - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
- #endif
-
- #if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
- LOOP_S_L_N(e, 1, EXTRUDERS)
- EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &singlenozzle_temp[e], 0, thermalManager.heater_maxtemp[0] - (HOTEND_OVERSHOOT));
- #endif
-
- //
- // Bed:
- //
- #if HAS_HEATED_BED
- EDIT_ITEM_FAST(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAX_TARGET, thermalManager.start_watching_bed);
- #endif
-
- //
- // Chamber:
- //
- #if HAS_HEATED_CHAMBER
- EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber);
- #endif
-
- //
- // Fan Speed:
- //
- #if HAS_FAN
-
- DEFINE_SINGLENOZZLE_ITEM();
-
- #if HAS_FAN0
- _FAN_EDIT_ITEMS(0,FIRST_FAN_SPEED);
- #endif
- #if HAS_FAN1
- FAN_EDIT_ITEMS(1);
- #elif SNFAN(1)
- singlenozzle_item(1);
- #endif
- #if HAS_FAN2
- FAN_EDIT_ITEMS(2);
- #elif SNFAN(2)
- singlenozzle_item(2);
- #endif
- #if HAS_FAN3
- FAN_EDIT_ITEMS(3);
- #elif SNFAN(3)
- singlenozzle_item(3);
- #endif
- #if HAS_FAN4
- FAN_EDIT_ITEMS(4);
- #elif SNFAN(4)
- singlenozzle_item(4);
- #endif
- #if HAS_FAN5
- FAN_EDIT_ITEMS(5);
- #elif SNFAN(5)
- singlenozzle_item(5);
- #endif
- #if HAS_FAN6
- FAN_EDIT_ITEMS(6);
- #elif SNFAN(6)
- singlenozzle_item(6);
- #endif
- #if HAS_FAN7
- FAN_EDIT_ITEMS(7);
- #elif SNFAN(7)
- singlenozzle_item(7);
- #endif
-
- #endif // HAS_FAN
-
- #if PREHEAT_COUNT
- //
- // Preheat for Materials 1 to 5
- //
- LOOP_L_N(m, PREHEAT_COUNT) {
- editable.int8 = m;
- #if HOTENDS > 1 || HAS_HEATED_BED
- SUBMENU_S(ui.get_preheat_label(m), MSG_PREHEAT_M, menu_preheat_m);
- #else
- ACTION_ITEM_S(ui.get_preheat_label(m), MSG_PREHEAT_M, do_preheat_end_m);
- #endif
- }
- #endif
-
- #if HAS_TEMP_HOTEND || HAS_HEATED_BED
- //
- // Cooldown
- //
- if (TERN0(HAS_HEATED_BED, thermalManager.temp_bed.target)) has_heat = true;
- if (has_heat) ACTION_ITEM(MSG_COOLDOWN, lcd_cooldown);
- #endif
-
- END_MENU();
- }
-
- #endif // HAS_LCD_MENU && HAS_TEMPERATURE
|