My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

Configuration.h 82KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Configuration.h
  25. *
  26. * Basic settings such as:
  27. *
  28. * - Type of electronics
  29. * - Type of temperature sensor
  30. * - Printer geometry
  31. * - Endstop configuration
  32. * - LCD controller
  33. * - Extra features
  34. *
  35. * Advanced settings can be found in Configuration_adv.h
  36. *
  37. */
  38. #define CONFIGURATION_H_VERSION 020000
  39. //===========================================================================
  40. //============================= Getting Started =============================
  41. //===========================================================================
  42. /**
  43. * Here are some standard links for getting your machine calibrated:
  44. *
  45. * http://reprap.org/wiki/Calibration
  46. * http://youtu.be/wAL9d7FgInk
  47. * http://calculator.josefprusa.cz
  48. * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  49. * http://www.thingiverse.com/thing:5573
  50. * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  51. * http://www.thingiverse.com/thing:298812
  52. */
  53. //===========================================================================
  54. //============================= DELTA Printer ===============================
  55. //===========================================================================
  56. // For a Delta printer start with one of the configuration files in the
  57. // config/examples/delta directory and customize for your machine.
  58. //
  59. //===========================================================================
  60. //============================= SCARA Printer ===============================
  61. //===========================================================================
  62. // For a SCARA printer start with the configuration files in
  63. // config/examples/SCARA and customize for your machine.
  64. //
  65. //===========================================================================
  66. //============================= Alfawise Printer ============================
  67. //===========================================================================
  68. // Forum link to help with a tutorial, in French! :
  69. // https://www.lesimprimantes3d.fr/forum/topic/18260-alfawise-u20x-u30-marlin-2x-firmware-alternatif/
  70. //
  71. // 1 - Select your Alfawise U30 or U20 or U20+ printer (NO MORE REQUIRED HERE)
  72. // and the touchscreen version, either 1.1 or 1.2. Most recent in France are v1.2 (blue pcb)
  73. // These defines are set in platformio.ini build parameters, sample for U20 -DU20 -DTS_V12
  74. // U20_PLUS was not tested, as we do not have a printer to test. Print bed PID settings MUST be tuned for it.
  75. // Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4
  76. // Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19
  77. // 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white,
  78. // Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed
  79. // with the proper boot sequence to be developped.
  80. #define LCD_READ_ID 0xD3 // Read display identification information in reg ID4 0xD3, for ILI9341 screens
  81. //#define LCD_READ_ID 0x04 // Read display identification information in reg ID1 0x04 - ST7789V / ILI9328 or others
  82. //===========================================================================
  83. // @section info
  84. // Author info of this build printed to the host during boot and M115
  85. #define STRING_CONFIG_H_AUTHOR "Hobi, tpruvot" // Who made the changes.
  86. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
  87. /**
  88. * *** VENDORS PLEASE READ ***
  89. *
  90. * Marlin allows you to add a custom boot image for Graphical LCDs.
  91. * With this option Marlin will first show your custom screen followed
  92. * by the standard Marlin logo with version number and web URL.
  93. *
  94. * We encourage you to take advantage of this new feature and we also
  95. * respectfully request that you retain the unmodified Marlin boot screen.
  96. */
  97. // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
  98. #define SHOW_BOOTSCREEN
  99. // Show the bitmap in Marlin/_Bootscreen.h on startup.
  100. //#define SHOW_CUSTOM_BOOTSCREEN
  101. // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
  102. #define CUSTOM_STATUS_SCREEN_IMAGE
  103. // @section machine
  104. /**
  105. * Select the serial port on the board to use for communication with the host.
  106. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  107. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  108. *
  109. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  110. */
  111. #define SERIAL_PORT 1
  112. /**
  113. * Select a secondary serial port on the board to use for communication with the host.
  114. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  115. * Serial port -1 is the USB emulated serial port, if available.
  116. *
  117. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  118. */
  119. //#define SERIAL_PORT_2 2
  120. /**
  121. * This setting determines the communication speed of the printer.
  122. *
  123. * 250000 works in most cases, but you might try a lower speed if
  124. * you commonly experience drop-outs during host printing.
  125. * You may try up to 1000000 to speed up SD file transfer.
  126. *
  127. * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  128. */
  129. #define BAUDRATE 250000
  130. // Enable the Bluetooth serial interface on AT90USB devices
  131. //#define BLUETOOTH
  132. // Choose the name from boards.h that matches your setup
  133. #ifndef MOTHERBOARD
  134. #define MOTHERBOARD BOARD_LONGER3D_LK
  135. #endif
  136. // Name displayed in the LCD "Ready" message and Info menu
  137. //#define CUSTOM_MACHINE_NAME "3D Printer"
  138. #ifdef U20
  139. #define CUSTOM_MACHINE_NAME "Alfawise U20"
  140. #elif defined(U30)
  141. #define CUSTOM_MACHINE_NAME "Alfawise U30"
  142. #elif defined(U20_PLUS)
  143. #define CUSTOM_MACHINE_NAME "Alfawise U20+"
  144. #elif defined(LK1)
  145. #define CUSTOM_MACHINE_NAME "Longer3D LK1"
  146. #elif defined(LK2)
  147. #define CUSTOM_MACHINE_NAME "Longer3D LK2"
  148. #elif defined(LK4)
  149. #define CUSTOM_MACHINE_NAME "Longer3D LK4"
  150. #endif
  151. // Printer's unique ID, used by some programs to differentiate between machines.
  152. // Choose your own or use a service like http://www.uuidgenerator.net/version4
  153. //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
  154. // @section extruder
  155. // This defines the number of extruders
  156. // :[1, 2, 3, 4, 5, 6]
  157. #define EXTRUDERS 1
  158. // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
  159. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
  160. // For Cyclops or any "multi-extruder" that shares a single nozzle.
  161. //#define SINGLENOZZLE
  162. /**
  163. * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
  164. *
  165. * This device allows one stepper driver on a control board to drive
  166. * two to eight stepper motors, one at a time, in a manner suitable
  167. * for extruders.
  168. *
  169. * This option only allows the multiplexer to switch on tool-change.
  170. * Additional options to configure custom E moves are pending.
  171. */
  172. //#define MK2_MULTIPLEXER
  173. #if ENABLED(MK2_MULTIPLEXER)
  174. // Override the default DIO selector pins here, if needed.
  175. // Some pins files may provide defaults for these pins.
  176. //#define E_MUX0_PIN 40 // Always Required
  177. //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
  178. //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
  179. #endif
  180. /**
  181. * Prusa Multi-Material Unit v2
  182. *
  183. * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  184. * Requires EXTRUDERS = 5
  185. *
  186. * For additional configuration see Configuration_adv.h
  187. */
  188. //#define PRUSA_MMU2
  189. // A dual extruder that uses a single stepper motor
  190. //#define SWITCHING_EXTRUDER
  191. #if ENABLED(SWITCHING_EXTRUDER)
  192. #define SWITCHING_EXTRUDER_SERVO_NR 0
  193. #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
  194. #if EXTRUDERS > 3
  195. #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
  196. #endif
  197. #endif
  198. // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
  199. //#define SWITCHING_NOZZLE
  200. #if ENABLED(SWITCHING_NOZZLE)
  201. #define SWITCHING_NOZZLE_SERVO_NR 0
  202. //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
  203. #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo)
  204. #endif
  205. /**
  206. * Two separate X-carriages with extruders that connect to a moving part
  207. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
  208. */
  209. //#define PARKING_EXTRUDER
  210. /**
  211. * Two separate X-carriages with extruders that connect to a moving part
  212. * via a magnetic docking mechanism using movements and no solenoid
  213. *
  214. * project : https://www.thingiverse.com/thing:3080893
  215. * movements : https://youtu.be/0xCEiG9VS3k
  216. * https://youtu.be/Bqbcs0CU2FE
  217. */
  218. //#define MAGNETIC_PARKING_EXTRUDER
  219. #if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  220. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
  221. #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
  222. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  223. #if ENABLED(PARKING_EXTRUDER)
  224. #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
  225. #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
  226. #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined.
  227. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  228. #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
  229. #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point
  230. #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple
  231. #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point
  232. #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling
  233. #endif
  234. #endif
  235. /**
  236. * Switching Toolhead
  237. *
  238. * Support for swappable and dockable toolheads, such as
  239. * the E3D Tool Changer. Toolheads are locked with a servo.
  240. */
  241. //#define SWITCHING_TOOLHEAD
  242. /**
  243. * Magnetic Switching Toolhead
  244. *
  245. * Support swappable and dockable toolheads with a magnetic
  246. * docking mechanism using movement and no servo.
  247. */
  248. //#define MAGNETIC_SWITCHING_TOOLHEAD
  249. /**
  250. * Electromagnetic Switching Toolhead
  251. *
  252. * Parking for CoreXY / HBot kinematics.
  253. * Toolheads are parked at one edge and held with an electromagnet.
  254. * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
  255. */
  256. //#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
  257. #if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  258. #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
  259. #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
  260. #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
  261. #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
  262. #if ENABLED(SWITCHING_TOOLHEAD)
  263. #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
  264. #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
  265. #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
  266. #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
  267. #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
  268. //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
  269. #if ENABLED(PRIME_BEFORE_REMOVE)
  270. #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
  271. #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
  272. #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
  273. #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
  274. #endif
  275. #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  276. #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
  277. #endif
  278. #endif
  279. /**
  280. * "Mixing Extruder"
  281. * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
  282. * - Extends the stepping routines to move multiple steppers in proportion to the mix.
  283. * - Optional support for Repetier Firmware's 'M164 S<index>' supporting virtual tools.
  284. * - This implementation supports up to two mixing extruders.
  285. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
  286. */
  287. //#define MIXING_EXTRUDER
  288. #if ENABLED(MIXING_EXTRUDER)
  289. #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
  290. #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
  291. //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
  292. //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD
  293. #if ENABLED(GRADIENT_MIX)
  294. //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias
  295. #endif
  296. #endif
  297. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  298. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  299. // For the other hotends it is their distance from the extruder 0 hotend.
  300. //#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
  301. //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
  302. //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
  303. // @section machine
  304. /**
  305. * Power Supply Control
  306. *
  307. * Enable and connect the power supply to the PS_ON_PIN.
  308. * Specify whether the power supply is active HIGH or active LOW.
  309. */
  310. //#define PSU_CONTROL
  311. #define PSU_NAME "360W 24V/15A"
  312. #if ENABLED(PSU_CONTROL)
  313. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
  314. //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
  315. //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
  316. #if ENABLED(AUTO_POWER_CONTROL)
  317. #define AUTO_POWER_FANS // Turn on PSU if fans need power
  318. #define AUTO_POWER_E_FANS
  319. #define AUTO_POWER_CONTROLLERFAN
  320. #define AUTO_POWER_CHAMBER_FAN
  321. //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
  322. //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
  323. #define POWER_TIMEOUT 30
  324. #endif
  325. #endif
  326. // @section temperature
  327. //===========================================================================
  328. //============================= Thermal Settings ============================
  329. //===========================================================================
  330. /**
  331. * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  332. *
  333. * Temperature sensors available:
  334. *
  335. * -4 : thermocouple with AD8495
  336. * -3 : thermocouple with MAX31855 (only for sensor 0)
  337. * -2 : thermocouple with MAX6675 (only for sensor 0)
  338. * -1 : thermocouple with AD595
  339. * 0 : not used
  340. * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  341. * 331 : (3.3V scaled thermistor 1 table)
  342. * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  343. * 3 : Mendel-parts thermistor (4.7k pullup)
  344. * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  345. * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
  346. * 501 : 100K Zonestar (Tronxy X3A) Thermistor
  347. * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  348. * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  349. * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  350. * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  351. * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  352. * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  353. * 10 : 100k RS thermistor 198-961 (4.7k pullup)
  354. * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
  355. * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  356. * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  357. * 15 : 100k thermistor calibration for JGAurora A5 hotend
  358. * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
  359. * 20 : Pt100 with circuit in the Ultimainboard V2.x
  360. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  361. * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  362. * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
  363. * 66 : 4.7M High Temperature thermistor from Dyze Design
  364. * 67 : 450C thermistor from SliceEngineering
  365. * 70 : the 100K thermistor found in the bq Hephestos 2
  366. * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
  367. * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
  368. *
  369. * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
  370. * (but gives greater accuracy and more stable PID)
  371. * 51 : 100k thermistor - EPCOS (1k pullup)
  372. * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  373. * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  374. *
  375. * 1047 : Pt1000 with 4k7 pullup
  376. * 1010 : Pt1000 with 1k pullup (non standard)
  377. * 147 : Pt100 with 4k7 pullup
  378. * 110 : Pt100 with 1k pullup (non standard)
  379. *
  380. * 1000 : Custom - Specify parameters in Configuration_adv.h
  381. *
  382. * Use these for Testing or Development purposes. NEVER for production machine.
  383. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  384. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  385. */
  386. #define TEMP_SENSOR_0 1
  387. #define TEMP_SENSOR_1 0
  388. #define TEMP_SENSOR_2 0
  389. #define TEMP_SENSOR_3 0
  390. #define TEMP_SENSOR_4 0
  391. #define TEMP_SENSOR_5 0
  392. #define TEMP_SENSOR_BED 1
  393. #define TEMP_SENSOR_CHAMBER 0
  394. // Dummy thermistor constant temperature readings, for use with 998 and 999
  395. #define DUMMY_THERMISTOR_998_VALUE 25
  396. #define DUMMY_THERMISTOR_999_VALUE 100
  397. // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
  398. // from the two sensors differ too much the print will be aborted.
  399. //#define TEMP_SENSOR_1_AS_REDUNDANT
  400. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  401. #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
  402. #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  403. #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  404. #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
  405. #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  406. #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  407. // Below this temperature the heater will be switched off
  408. // because it probably indicates a broken thermistor wire.
  409. #define HEATER_0_MINTEMP 5
  410. #define HEATER_1_MINTEMP 5
  411. #define HEATER_2_MINTEMP 5
  412. #define HEATER_3_MINTEMP 5
  413. #define HEATER_4_MINTEMP 5
  414. #define HEATER_5_MINTEMP 5
  415. #define BED_MINTEMP 5
  416. // Above this temperature the heater will be switched off.
  417. // This can protect components from overheating, but NOT from shorts and failures.
  418. // (Use MINTEMP for thermistor short/failure protection.)
  419. #define HEATER_0_MAXTEMP 275
  420. #define HEATER_1_MAXTEMP 275
  421. #define HEATER_2_MAXTEMP 275
  422. #define HEATER_3_MAXTEMP 275
  423. #define HEATER_4_MAXTEMP 275
  424. #define HEATER_5_MAXTEMP 275
  425. #define BED_MAXTEMP 150
  426. //===========================================================================
  427. //============================= PID Settings ================================
  428. //===========================================================================
  429. // PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
  430. // Comment the following line to disable PID and enable bang-bang.
  431. #define PIDTEMP
  432. #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
  433. #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  434. #define PID_K1 0.95 // Smoothing factor within any PID loop
  435. #if ENABLED(PIDTEMP)
  436. //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
  437. //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
  438. //#define PID_DEBUG // Sends debug data to the serial port.
  439. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  440. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  441. //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
  442. // Set/get with gcode: M301 E[extruder number, 0-2]
  443. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  444. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  445. // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
  446. // Alfawise U30/U20
  447. // Please refine the PID settings for your own machine to avoid the E1 hotend error. These a basic settings allowing first startups.
  448. // Use the command M303 E0 S200 C8 each time you make any changes to your extruder
  449. #define DEFAULT_Kp 17.22
  450. #define DEFAULT_Ki 1.00
  451. #define DEFAULT_Kd 74.22
  452. // MakerGear
  453. //#define DEFAULT_Kp 7.0
  454. //#define DEFAULT_Ki 0.1
  455. //#define DEFAULT_Kd 12
  456. // Mendel Parts V9 on 12V
  457. //#define DEFAULT_Kp 63.0
  458. //#define DEFAULT_Ki 2.25
  459. //#define DEFAULT_Kd 440
  460. #endif // PIDTEMP
  461. //===========================================================================
  462. //====================== PID > Bed Temperature Control ======================
  463. //===========================================================================
  464. /**
  465. * PID Bed Heating
  466. *
  467. * If this option is enabled set PID constants below.
  468. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
  469. *
  470. * The PID frequency will be the same as the extruder PWM.
  471. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  472. * which is fine for driving a square wave into a resistive load and does not significantly
  473. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
  474. * heater. If your configuration is significantly different than this and you don't understand
  475. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  476. */
  477. #define PIDTEMPBED
  478. //#define BED_LIMIT_SWITCHING
  479. /**
  480. * Max Bed Power
  481. * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
  482. * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  483. * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  484. */
  485. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  486. #if ENABLED(PIDTEMPBED)
  487. //#define MIN_BED_POWER 0
  488. //#define PID_BED_DEBUG // Sends debug data to the serial port.
  489. //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  490. //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  491. //#define DEFAULT_bedKp 10.00
  492. //#define DEFAULT_bedKi .023
  493. //#define DEFAULT_bedKd 305.4
  494. //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  495. //from pidautotune
  496. //#define DEFAULT_bedKp 97.1
  497. //#define DEFAULT_bedKi 1.41
  498. //#define DEFAULT_bedKd 1675.16
  499. #if defined(U30) || defined(LK2) || defined(LK4)
  500. //From M303 command for Alfawise U30 :
  501. #define DEFAULT_bedKp 338.46
  502. #define DEFAULT_bedKi 63.96
  503. #define DEFAULT_bedKd 447.78
  504. #endif
  505. #if defined(U20) || defined(LK1)
  506. //From M303 command for Alfawise U20 :
  507. #define DEFAULT_bedKp 841.68
  508. #define DEFAULT_bedKi 152.12
  509. #define DEFAULT_bedKd 1164.25
  510. #endif
  511. #ifdef U20_PLUS
  512. // These PID setting MUST be updated.
  513. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  514. #define DEFAULT_bedKp 841.68
  515. #define DEFAULT_bedKi 152.12
  516. #define DEFAULT_bedKd 1164.25
  517. #endif
  518. #endif // PIDTEMPBED
  519. // @section extruder
  520. /**
  521. * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
  522. * Add M302 to set the minimum extrusion temperature and/or turn
  523. * cold extrusion prevention on and off.
  524. *
  525. * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
  526. */
  527. #define PREVENT_COLD_EXTRUSION
  528. #define EXTRUDE_MINTEMP 170
  529. /**
  530. * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
  531. * Note: For Bowden Extruders make this large enough to allow load/unload.
  532. */
  533. #define PREVENT_LENGTHY_EXTRUDE
  534. #define EXTRUDE_MAXLENGTH 200
  535. //===========================================================================
  536. //======================== Thermal Runaway Protection =======================
  537. //===========================================================================
  538. /**
  539. * Thermal Protection provides additional protection to your printer from damage
  540. * and fire. Marlin always includes safe min and max temperature ranges which
  541. * protect against a broken or disconnected thermistor wire.
  542. *
  543. * The issue: If a thermistor falls out, it will report the much lower
  544. * temperature of the air in the room, and the the firmware will keep
  545. * the heater on.
  546. *
  547. * If you get "Thermal Runaway" or "Heating failed" errors the
  548. * details can be tuned in Configuration_adv.h
  549. */
  550. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  551. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  552. //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
  553. //===========================================================================
  554. //============================= Mechanical Settings =========================
  555. //===========================================================================
  556. // @section machine
  557. // Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
  558. // either in the usual order or reversed
  559. //#define COREXY
  560. //#define COREXZ
  561. //#define COREYZ
  562. //#define COREYX
  563. //#define COREZX
  564. //#define COREZY
  565. //===========================================================================
  566. //============================== Endstop Settings ===========================
  567. //===========================================================================
  568. // @section homing
  569. // Specify here all the endstop connectors that are connected to any endstop or probe.
  570. // Almost all printers will be using one per axis. Probes will use one or more of the
  571. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
  572. #define USE_XMIN_PLUG
  573. #define USE_YMIN_PLUG
  574. #define USE_ZMIN_PLUG
  575. //#define USE_XMAX_PLUG
  576. //#define USE_YMAX_PLUG
  577. //#define USE_ZMAX_PLUG
  578. // Enable pullup for all endstops to prevent a floating state
  579. //#define ENDSTOPPULLUPS
  580. #if DISABLED(ENDSTOPPULLUPS)
  581. // Disable ENDSTOPPULLUPS to set pullups individually
  582. //#define ENDSTOPPULLUP_XMAX
  583. //#define ENDSTOPPULLUP_YMAX
  584. //#define ENDSTOPPULLUP_ZMAX
  585. //#define ENDSTOPPULLUP_XMIN
  586. //#define ENDSTOPPULLUP_YMIN
  587. //#define ENDSTOPPULLUP_ZMIN
  588. #define ENDSTOPPULLUP_ZMIN_PROBE
  589. #endif
  590. // Enable pulldown for all endstops to prevent a floating state
  591. //#define ENDSTOPPULLDOWNS
  592. #if DISABLED(ENDSTOPPULLDOWNS)
  593. // Disable ENDSTOPPULLDOWNS to set pulldowns individually
  594. //#define ENDSTOPPULLDOWN_XMAX
  595. //#define ENDSTOPPULLDOWN_YMAX
  596. //#define ENDSTOPPULLDOWN_ZMAX
  597. //#define ENDSTOPPULLDOWN_XMIN
  598. //#define ENDSTOPPULLDOWN_YMIN
  599. //#define ENDSTOPPULLDOWN_ZMIN
  600. //#define ENDSTOPPULLDOWN_ZMIN_PROBE
  601. #endif
  602. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  603. #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  604. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  605. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  606. #define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  607. #define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  608. #define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  609. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
  610. /**
  611. * Stepper Drivers
  612. *
  613. * These settings allow Marlin to tune stepper driver timing and enable advanced options for
  614. * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
  615. *
  616. * A4988 is assumed for unspecified drivers.
  617. *
  618. * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  619. * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
  620. * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
  621. * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
  622. * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  623. * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  624. */
  625. #define X_DRIVER_TYPE A4988
  626. #define Y_DRIVER_TYPE A4988
  627. #define Z_DRIVER_TYPE A4988
  628. //#define X2_DRIVER_TYPE A4988
  629. //#define Y2_DRIVER_TYPE A4988
  630. //#define Z2_DRIVER_TYPE A4988
  631. //#define Z3_DRIVER_TYPE A4988
  632. #define E0_DRIVER_TYPE A4988
  633. //#define E1_DRIVER_TYPE A4988
  634. //#define E2_DRIVER_TYPE A4988
  635. //#define E3_DRIVER_TYPE A4988
  636. //#define E4_DRIVER_TYPE A4988
  637. //#define E5_DRIVER_TYPE A4988
  638. // Enable this feature if all enabled endstop pins are interrupt-capable.
  639. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
  640. #define ENDSTOP_INTERRUPTS_FEATURE
  641. /**
  642. * Endstop Noise Threshold
  643. *
  644. * Enable if your probe or endstops falsely trigger due to noise.
  645. *
  646. * - Higher values may affect repeatability or accuracy of some bed probes.
  647. * - To fix noise install a 100nF ceramic capacitor inline with the switch.
  648. * - This feature is not required for common micro-switches mounted on PCBs
  649. * based on the Makerbot design, which already have the 100nF capacitor.
  650. *
  651. * :[2,3,4,5,6,7]
  652. */
  653. //#define ENDSTOP_NOISE_THRESHOLD 2
  654. //=============================================================================
  655. //============================== Movement Settings ============================
  656. //=============================================================================
  657. // @section motion
  658. /**
  659. * Default Settings
  660. *
  661. * These settings can be reset by M502
  662. *
  663. * Note that if EEPROM is enabled, saved values will override these.
  664. */
  665. /**
  666. * With this option each E stepper can have its own factors for the
  667. * following movement settings. If fewer factors are given than the
  668. * total number of extruders, the last value applies to the rest.
  669. */
  670. //#define DISTINCT_E_FACTORS
  671. /**
  672. * Default Axis Steps Per Unit (steps/mm)
  673. * Override with M92
  674. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  675. */
  676. #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 }
  677. /**
  678. * Default Max Feed Rate (mm/s)
  679. * Override with M203
  680. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  681. */
  682. #define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 }
  683. #define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
  684. #if ENABLED(LIMITED_MAX_FR_EDITING)
  685. #define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits
  686. #endif
  687. /**
  688. * Default Max Acceleration (change/s) change = mm/s
  689. * (Maximum start speed for accelerated moves)
  690. * Override with M201
  691. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  692. */
  693. #define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 }
  694. #define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
  695. #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
  696. #define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits
  697. #endif
  698. /**
  699. * Default Acceleration (change/s) change = mm/s
  700. * Override with M204
  701. *
  702. * M204 P Acceleration
  703. * M204 R Retract Acceleration
  704. * M204 T Travel Acceleration
  705. */
  706. #define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves
  707. #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
  708. #define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves
  709. /**
  710. * Default Jerk limits (mm/s)
  711. * Override with M205 X Y Z E
  712. *
  713. * "Jerk" specifies the minimum speed change that requires acceleration.
  714. * When changing speed and direction, if the difference is less than the
  715. * value set here, it may happen instantaneously.
  716. */
  717. #define CLASSIC_JERK
  718. #if ENABLED(CLASSIC_JERK)
  719. #define DEFAULT_XJERK 10.0
  720. #define DEFAULT_YJERK 10.0
  721. #define DEFAULT_ZJERK 0.4
  722. #define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
  723. #if ENABLED(LIMITED_JERK_EDITING)
  724. #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
  725. #endif
  726. #endif
  727. #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
  728. /**
  729. * Junction Deviation Factor
  730. *
  731. * See:
  732. * https://reprap.org/forum/read.php?1,739819
  733. * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  734. */
  735. #if DISABLED(CLASSIC_JERK)
  736. #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge
  737. #endif
  738. /**
  739. * S-Curve Acceleration
  740. *
  741. * This option eliminates vibration during printing by fitting a Bézier
  742. * curve to move acceleration, producing much smoother direction changes.
  743. *
  744. * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  745. */
  746. //#define S_CURVE_ACCELERATION
  747. //===========================================================================
  748. //============================= Z Probe Options =============================
  749. //===========================================================================
  750. // @section probes
  751. //
  752. // See http://marlinfw.org/docs/configuration/probes.html
  753. //
  754. /**
  755. * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  756. *
  757. * Enable this option for a probe connected to the Z Min endstop pin.
  758. */
  759. #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  760. /**
  761. * Z_MIN_PROBE_PIN
  762. *
  763. * Define this pin if the probe is not connected to Z_MIN_PIN.
  764. * If not defined the default pin for the selected MOTHERBOARD
  765. * will be used. Most of the time the default is what you want.
  766. *
  767. * - The simplest option is to use a free endstop connector.
  768. * - Use 5V for powered (usually inductive) sensors.
  769. *
  770. * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
  771. * - For simple switches connect...
  772. * - normally-closed switches to GND and D32.
  773. * - normally-open switches to 5V and D32.
  774. *
  775. */
  776. //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
  777. /**
  778. * Probe Type
  779. *
  780. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
  781. * Activate one of these to use Auto Bed Leveling below.
  782. */
  783. /**
  784. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
  785. * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  786. * or (with LCD_BED_LEVELING) the LCD controller.
  787. */
  788. #define PROBE_MANUALLY
  789. #define MANUAL_PROBE_START_Z 0.2
  790. /**
  791. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  792. * (e.g., an inductive probe or a nozzle-based probe-switch.)
  793. */
  794. //#define FIX_MOUNTED_PROBE
  795. /**
  796. * Z Servo Probe, such as an endstop switch on a rotating arm.
  797. */
  798. //#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
  799. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
  800. /**
  801. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  802. */
  803. #define BLTOUCH
  804. /**
  805. * Touch-MI Probe by hotends.fr
  806. *
  807. * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
  808. * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
  809. * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
  810. *
  811. * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
  812. * and a minimum Z_HOMING_HEIGHT of 10.
  813. */
  814. //#define TOUCH_MI_PROBE
  815. #if ENABLED(TOUCH_MI_PROBE)
  816. #undef PROBE_MANUALLY
  817. #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
  818. //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
  819. //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu)
  820. #endif
  821. // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
  822. //#define SOLENOID_PROBE
  823. // A sled-mounted probe like those designed by Charles Bell.
  824. //#define Z_PROBE_SLED
  825. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  826. // A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
  827. //#define RACK_AND_PINION_PROBE
  828. #if ENABLED(RACK_AND_PINION_PROBE)
  829. #define Z_PROBE_DEPLOY_X X_MIN_POS
  830. #define Z_PROBE_RETRACT_X X_MAX_POS
  831. #endif
  832. //
  833. // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
  834. //
  835. /**
  836. * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
  837. *
  838. * In the following example the X and Y offsets are both positive:
  839. *
  840. * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
  841. *
  842. * +-- BACK ---+
  843. * | |
  844. * L | (+) P | R <-- probe (20,20)
  845. * E | | I
  846. * F | (-) N (+) | G <-- nozzle (10,10)
  847. * T | | H
  848. * | (-) | T
  849. * | |
  850. * O-- FRONT --+
  851. * (0,0)
  852. *
  853. * Specify a Probe position as { X, Y, Z }
  854. */
  855. #define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 }
  856. // Certain types of probes need to stay away from edges
  857. #define MIN_PROBE_EDGE 10
  858. // X and Y axis travel speed (mm/m) between probes
  859. #define XY_PROBE_SPEED 8000
  860. // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
  861. #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
  862. // Feedrate (mm/m) for the "accurate" probe of each point
  863. #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
  864. /**
  865. * Multiple Probing
  866. *
  867. * You may get improved results by probing 2 or more times.
  868. * With EXTRA_PROBING the more atypical reading(s) will be disregarded.
  869. *
  870. * A total of 2 does fast/slow probes with a weighted average.
  871. * A total of 3 or more adds more slow probes, taking the average.
  872. */
  873. #define MULTIPLE_PROBING 2
  874. //#define EXTRA_PROBING 1
  875. /**
  876. * Z probes require clearance when deploying, stowing, and moving between
  877. * probe points to avoid hitting the bed and other hardware.
  878. * Servo-mounted probes require extra space for the arm to rotate.
  879. * Inductive probes need space to keep from triggering early.
  880. *
  881. * Use these settings to specify the distance (mm) to raise the probe (or
  882. * lower the bed). The values set here apply over and above any (negative)
  883. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  884. * Only integer values >= 1 are valid here.
  885. *
  886. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
  887. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
  888. */
  889. #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
  890. #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
  891. #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
  892. //#define Z_AFTER_PROBING 5 // Z position after probing is done
  893. #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
  894. // For M851 give a range for adjusting the Z probe offset
  895. #define Z_PROBE_OFFSET_RANGE_MIN -20
  896. #define Z_PROBE_OFFSET_RANGE_MAX 20
  897. // Enable the M48 repeatability test to test probe accuracy
  898. #define Z_MIN_PROBE_REPEATABILITY_TEST
  899. // Before deploy/stow pause for user confirmation
  900. //#define PAUSE_BEFORE_DEPLOY_STOW
  901. #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
  902. //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
  903. #endif
  904. /**
  905. * Enable one or more of the following if probing seems unreliable.
  906. * Heaters and/or fans can be disabled during probing to minimize electrical
  907. * noise. A delay can also be added to allow noise and vibration to settle.
  908. * These options are most useful for the BLTouch probe, but may also improve
  909. * readings with inductive probes and piezo sensors.
  910. */
  911. //#define PROBING_HEATERS_OFF // Turn heaters off when probing
  912. #if ENABLED(PROBING_HEATERS_OFF)
  913. //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
  914. #endif
  915. //#define PROBING_FANS_OFF // Turn fans off when probing
  916. //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
  917. //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
  918. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  919. // :{ 0:'Low', 1:'High' }
  920. #define X_ENABLE_ON 0
  921. #define Y_ENABLE_ON 0
  922. #define Z_ENABLE_ON 0
  923. #define E_ENABLE_ON 0 // For all extruders
  924. // Disables axis stepper immediately when it's not being used.
  925. // WARNING: When motors turn off there is a chance of losing position accuracy!
  926. #define DISABLE_X false
  927. #define DISABLE_Y false
  928. #define DISABLE_Z false
  929. // Warn on display about possibly reduced accuracy
  930. //#define DISABLE_REDUCED_ACCURACY_WARNING
  931. // @section extruder
  932. #define DISABLE_E false // For all extruders
  933. #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
  934. // @section machine
  935. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  936. #define INVERT_X_DIR true
  937. #define INVERT_Y_DIR false
  938. #define INVERT_Z_DIR true
  939. // @section extruder
  940. // For direct drive extruder v9 set to true, for geared extruder set to false.
  941. #define INVERT_E0_DIR false
  942. #define INVERT_E1_DIR false
  943. #define INVERT_E2_DIR false
  944. #define INVERT_E3_DIR false
  945. #define INVERT_E4_DIR false
  946. #define INVERT_E5_DIR false
  947. // @section homing
  948. //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
  949. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
  950. //#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
  951. // Be sure you have this distance over your Z_MAX_POS in case.
  952. // Direction of endstops when homing; 1=MAX, -1=MIN
  953. // :[-1,1]
  954. #define X_HOME_DIR -1
  955. #define Y_HOME_DIR -1
  956. #define Z_HOME_DIR -1
  957. // @section machine
  958. #if defined(U30) || defined(LK2) || defined(LK4)
  959. #define X_BED_SIZE 220
  960. #define Y_BED_SIZE 220
  961. #define Z_MACHINE_MAX 250
  962. #endif
  963. #if defined(U20) || defined(LK1)
  964. #define X_BED_SIZE 300
  965. #define Y_BED_SIZE 300
  966. #define Z_MACHINE_MAX 400
  967. #endif
  968. #ifdef U20_PLUS
  969. #define X_BED_SIZE 400
  970. #define Y_BED_SIZE 400
  971. #define Z_MACHINE_MAX 500
  972. #endif
  973. // Travel limits (mm) after homing, corresponding to endstop positions.
  974. #define X_MIN_POS 0
  975. #define Y_MIN_POS 0
  976. #define Z_MIN_POS 0
  977. #define X_MAX_POS X_BED_SIZE
  978. #define Y_MAX_POS Y_BED_SIZE
  979. #define Z_MAX_POS Z_MACHINE_MAX
  980. /**
  981. * Software Endstops
  982. *
  983. * - Prevent moves outside the set machine bounds.
  984. * - Individual axes can be disabled, if desired.
  985. * - X and Y only apply to Cartesian robots.
  986. * - Use 'M211' to set software endstops on/off or report current state
  987. */
  988. // Min software endstops constrain movement within minimum coordinate bounds
  989. #define MIN_SOFTWARE_ENDSTOPS
  990. #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  991. #define MIN_SOFTWARE_ENDSTOP_X
  992. #define MIN_SOFTWARE_ENDSTOP_Y
  993. #define MIN_SOFTWARE_ENDSTOP_Z
  994. #endif
  995. // Max software endstops constrain movement within maximum coordinate bounds
  996. #define MAX_SOFTWARE_ENDSTOPS
  997. #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
  998. #define MAX_SOFTWARE_ENDSTOP_X
  999. #define MAX_SOFTWARE_ENDSTOP_Y
  1000. #define MAX_SOFTWARE_ENDSTOP_Z
  1001. #endif
  1002. #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  1003. //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
  1004. #endif
  1005. /**
  1006. * Filament Runout Sensors
  1007. * Mechanical or opto endstops are used to check for the presence of filament.
  1008. *
  1009. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  1010. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  1011. * By default the firmware assumes HIGH=FILAMENT PRESENT.
  1012. */
  1013. #define FILAMENT_RUNOUT_SENSOR
  1014. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  1015. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
  1016. #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor.
  1017. //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
  1018. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
  1019. // Set one or more commands to execute on filament runout.
  1020. // (After 'M412 H' Marlin will ask the host to handle the process.)
  1021. #define FILAMENT_RUNOUT_SCRIPT "M600"
  1022. // After a runout is detected, continue printing this length of filament
  1023. // before executing the runout script. Useful for a sensor at the end of
  1024. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
  1025. //#define FILAMENT_RUNOUT_DISTANCE_MM 25
  1026. #ifdef FILAMENT_RUNOUT_DISTANCE_MM
  1027. // Enable this option to use an encoder disc that toggles the runout pin
  1028. // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
  1029. // large enough to avoid false positives.)
  1030. //#define FILAMENT_MOTION_SENSOR
  1031. #endif
  1032. #endif
  1033. //===========================================================================
  1034. //=============================== Bed Leveling ==============================
  1035. //===========================================================================
  1036. // @section calibrate
  1037. /**
  1038. * Choose one of the options below to enable G29 Bed Leveling. The parameters
  1039. * and behavior of G29 will change depending on your selection.
  1040. *
  1041. * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
  1042. *
  1043. * - AUTO_BED_LEVELING_3POINT
  1044. * Probe 3 arbitrary points on the bed (that aren't collinear)
  1045. * You specify the XY coordinates of all 3 points.
  1046. * The result is a single tilted plane. Best for a flat bed.
  1047. *
  1048. * - AUTO_BED_LEVELING_LINEAR
  1049. * Probe several points in a grid.
  1050. * You specify the rectangle and the density of sample points.
  1051. * The result is a single tilted plane. Best for a flat bed.
  1052. *
  1053. * - AUTO_BED_LEVELING_BILINEAR
  1054. * Probe several points in a grid.
  1055. * You specify the rectangle and the density of sample points.
  1056. * The result is a mesh, best for large or uneven beds.
  1057. *
  1058. * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  1059. * A comprehensive bed leveling system combining the features and benefits
  1060. * of other systems. UBL also includes integrated Mesh Generation, Mesh
  1061. * Validation and Mesh Editing systems.
  1062. *
  1063. * - MESH_BED_LEVELING
  1064. * Probe a grid manually
  1065. * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
  1066. * For machines without a probe, Mesh Bed Leveling provides a method to perform
  1067. * leveling in steps so you can manually adjust the Z height at each grid-point.
  1068. * With an LCD controller the process is guided step-by-step.
  1069. */
  1070. //#define AUTO_BED_LEVELING_3POINT
  1071. //#define AUTO_BED_LEVELING_LINEAR
  1072. #define AUTO_BED_LEVELING_BILINEAR
  1073. //#define AUTO_BED_LEVELING_UBL
  1074. //#define MESH_BED_LEVELING
  1075. /**
  1076. * Normally G28 leaves leveling disabled on completion. Enable
  1077. * this option to have G28 restore the prior leveling state.
  1078. */
  1079. //#define RESTORE_LEVELING_AFTER_G28
  1080. /**
  1081. * Enable detailed logging of G28, G29, M48, etc.
  1082. * Turn on with the command 'M111 S32'.
  1083. * NOTE: Requires a lot of PROGMEM!
  1084. */
  1085. //#define DEBUG_LEVELING_FEATURE
  1086. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  1087. // Gradually reduce leveling correction until a set height is reached,
  1088. // at which point movement will be level to the machine's XY plane.
  1089. // The height can be set with M420 Z<height>
  1090. #define ENABLE_LEVELING_FADE_HEIGHT
  1091. // For Cartesian machines, instead of dividing moves on mesh boundaries,
  1092. // split up moves into short segments like a Delta. This follows the
  1093. // contours of the bed more closely than edge-to-edge straight moves.
  1094. #define SEGMENT_LEVELED_MOVES
  1095. #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
  1096. /**
  1097. * Enable the G26 Mesh Validation Pattern tool.
  1098. */
  1099. //#define G26_MESH_VALIDATION
  1100. #if ENABLED(G26_MESH_VALIDATION)
  1101. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
  1102. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
  1103. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
  1104. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
  1105. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
  1106. #endif
  1107. #endif
  1108. #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  1109. // Set the number of grid points per dimension.
  1110. #define GRID_MAX_POINTS_X 4
  1111. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1112. // Probe along the Y axis, advancing X after each column
  1113. //#define PROBE_Y_FIRST
  1114. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  1115. // Beyond the probed grid, continue the implied tilt?
  1116. // Default is to maintain the height of the nearest edge.
  1117. //#define EXTRAPOLATE_BEYOND_GRID
  1118. //
  1119. // Experimental Subdivision of the grid by Catmull-Rom method.
  1120. // Synthesizes intermediate points to produce a more detailed mesh.
  1121. //
  1122. //#define ABL_BILINEAR_SUBDIVISION
  1123. #if ENABLED(ABL_BILINEAR_SUBDIVISION)
  1124. // Number of subdivisions between probe points
  1125. #define BILINEAR_SUBDIVISIONS 3
  1126. #endif
  1127. #endif
  1128. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  1129. //===========================================================================
  1130. //========================= Unified Bed Leveling ============================
  1131. //===========================================================================
  1132. //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
  1133. #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
  1134. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
  1135. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1136. #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
  1137. #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
  1138. //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
  1139. // as the Z-Height correction value.
  1140. #elif ENABLED(MESH_BED_LEVELING)
  1141. //===========================================================================
  1142. //=================================== Mesh ==================================
  1143. //===========================================================================
  1144. #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
  1145. #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
  1146. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1147. //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
  1148. #endif // BED_LEVELING
  1149. /**
  1150. * Add a bed leveling sub-menu for ABL or MBL.
  1151. * Include a guided procedure if manual probing is enabled.
  1152. */
  1153. //#define LCD_BED_LEVELING
  1154. #if ENABLED(LCD_BED_LEVELING)
  1155. #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
  1156. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
  1157. //#define MESH_EDIT_MENU // Add a menu to edit mesh points
  1158. #endif
  1159. // Add a menu item to move between bed corners for manual bed adjustment
  1160. #define LEVEL_BED_CORNERS
  1161. #if ENABLED(LEVEL_BED_CORNERS)
  1162. #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
  1163. #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
  1164. #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points
  1165. #define LEVEL_CENTER_TOO // Move to the center after the last corner
  1166. #endif
  1167. /**
  1168. * Commands to execute at the end of G29 probing.
  1169. * Useful to retract or move the Z probe out of the way.
  1170. */
  1171. //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
  1172. // @section homing
  1173. // The center of the bed is at (X=0, Y=0)
  1174. //#define BED_CENTER_AT_0_0
  1175. // Manually set the home position. Leave these undefined for automatic settings.
  1176. // For DELTA this is the top-center of the Cartesian print volume.
  1177. //#define MANUAL_X_HOME_POS 0
  1178. //#define MANUAL_Y_HOME_POS 0
  1179. //#define MANUAL_Z_HOME_POS 0
  1180. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
  1181. //
  1182. // With this feature enabled:
  1183. //
  1184. // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
  1185. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
  1186. // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
  1187. // - Prevent Z homing when the Z probe is outside bed area.
  1188. //
  1189. #define Z_SAFE_HOMING
  1190. #if ENABLED(Z_SAFE_HOMING)
  1191. #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
  1192. //#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
  1193. #define Z_SAFE_HOMING_Y_POINT 4
  1194. #endif
  1195. // Homing speeds (mm/m)
  1196. #define HOMING_FEEDRATE_XY (40*60)
  1197. #define HOMING_FEEDRATE_Z (7*60)
  1198. // Validate that endstops are triggered on homing moves
  1199. #define VALIDATE_HOMING_ENDSTOPS
  1200. // @section calibrate
  1201. /**
  1202. * Bed Skew Compensation
  1203. *
  1204. * This feature corrects for misalignment in the XYZ axes.
  1205. *
  1206. * Take the following steps to get the bed skew in the XY plane:
  1207. * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
  1208. * 2. For XY_DIAG_AC measure the diagonal A to C
  1209. * 3. For XY_DIAG_BD measure the diagonal B to D
  1210. * 4. For XY_SIDE_AD measure the edge A to D
  1211. *
  1212. * Marlin automatically computes skew factors from these measurements.
  1213. * Skew factors may also be computed and set manually:
  1214. *
  1215. * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
  1216. * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
  1217. *
  1218. * If desired, follow the same procedure for XZ and YZ.
  1219. * Use these diagrams for reference:
  1220. *
  1221. * Y Z Z
  1222. * ^ B-------C ^ B-------C ^ B-------C
  1223. * | / / | / / | / /
  1224. * | / / | / / | / /
  1225. * | A-------D | A-------D | A-------D
  1226. * +-------------->X +-------------->X +-------------->Y
  1227. * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
  1228. */
  1229. //#define SKEW_CORRECTION
  1230. #if ENABLED(SKEW_CORRECTION)
  1231. // Input all length measurements here:
  1232. #define XY_DIAG_AC 282.8427124746
  1233. #define XY_DIAG_BD 282.8427124746
  1234. #define XY_SIDE_AD 200
  1235. // Or, set the default skew factors directly here
  1236. // to override the above measurements:
  1237. #define XY_SKEW_FACTOR 0.0
  1238. //#define SKEW_CORRECTION_FOR_Z
  1239. #if ENABLED(SKEW_CORRECTION_FOR_Z)
  1240. #define XZ_DIAG_AC 282.8427124746
  1241. #define XZ_DIAG_BD 282.8427124746
  1242. #define YZ_DIAG_AC 282.8427124746
  1243. #define YZ_DIAG_BD 282.8427124746
  1244. #define YZ_SIDE_AD 200
  1245. #define XZ_SKEW_FACTOR 0.0
  1246. #define YZ_SKEW_FACTOR 0.0
  1247. #endif
  1248. // Enable this option for M852 to set skew at runtime
  1249. //#define SKEW_CORRECTION_GCODE
  1250. #endif
  1251. //=============================================================================
  1252. //============================= Additional Features ===========================
  1253. //=============================================================================
  1254. // @section extras
  1255. /**
  1256. * EEPROM
  1257. *
  1258. * Persistent storage to preserve configurable settings across reboots.
  1259. *
  1260. * M500 - Store settings to EEPROM.
  1261. * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  1262. * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  1263. */
  1264. #define EEPROM_SETTINGS // Persistent storage with M500 and M501
  1265. //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
  1266. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
  1267. #if ENABLED(EEPROM_SETTINGS)
  1268. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
  1269. #endif
  1270. //
  1271. // Host Keepalive
  1272. //
  1273. // When enabled Marlin will send a busy status message to the host
  1274. // every couple of seconds when it can't accept commands.
  1275. //
  1276. #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
  1277. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
  1278. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
  1279. //
  1280. // M100 Free Memory Watcher
  1281. //
  1282. //#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
  1283. //
  1284. // G20/G21 Inch mode support
  1285. //
  1286. //#define INCH_MODE_SUPPORT
  1287. //
  1288. // M149 Set temperature units support
  1289. //
  1290. //#define TEMPERATURE_UNITS_SUPPORT
  1291. // @section temperature
  1292. // Preheat Constants
  1293. #define PREHEAT_1_LABEL "PLA"
  1294. #define PREHEAT_1_TEMP_HOTEND 200
  1295. #define PREHEAT_1_TEMP_BED 60
  1296. #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
  1297. #define PREHEAT_2_LABEL "ABS"
  1298. #define PREHEAT_2_TEMP_HOTEND 250
  1299. #define PREHEAT_2_TEMP_BED 100
  1300. #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
  1301. /**
  1302. * Nozzle Park
  1303. *
  1304. * Park the nozzle at the given XYZ position on idle or G27.
  1305. *
  1306. * The "P" parameter controls the action applied to the Z axis:
  1307. *
  1308. * P0 (Default) If Z is below park Z raise the nozzle.
  1309. * P1 Raise the nozzle always to Z-park height.
  1310. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  1311. */
  1312. #define NOZZLE_PARK_FEATURE
  1313. #if ENABLED(NOZZLE_PARK_FEATURE)
  1314. // Specify a park position as { X, Y, Z_raise }
  1315. #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
  1316. #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
  1317. #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
  1318. #endif
  1319. /**
  1320. * Clean Nozzle Feature -- EXPERIMENTAL
  1321. *
  1322. * Adds the G12 command to perform a nozzle cleaning process.
  1323. *
  1324. * Parameters:
  1325. * P Pattern
  1326. * S Strokes / Repetitions
  1327. * T Triangles (P1 only)
  1328. *
  1329. * Patterns:
  1330. * P0 Straight line (default). This process requires a sponge type material
  1331. * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
  1332. * between the start / end points.
  1333. *
  1334. * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
  1335. * number of zig-zag triangles to do. "S" defines the number of strokes.
  1336. * Zig-zags are done in whichever is the narrower dimension.
  1337. * For example, "G12 P1 S1 T3" will execute:
  1338. *
  1339. * --
  1340. * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
  1341. * | | / \ / \ / \ |
  1342. * A | | / \ / \ / \ |
  1343. * | | / \ / \ / \ |
  1344. * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
  1345. * -- +--------------------------------+
  1346. * |________|_________|_________|
  1347. * T1 T2 T3
  1348. *
  1349. * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
  1350. * "R" specifies the radius. "S" specifies the stroke count.
  1351. * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
  1352. *
  1353. * Caveats: The ending Z should be the same as starting Z.
  1354. * Attention: EXPERIMENTAL. G-code arguments may change.
  1355. *
  1356. */
  1357. //#define NOZZLE_CLEAN_FEATURE
  1358. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  1359. // Default number of pattern repetitions
  1360. #define NOZZLE_CLEAN_STROKES 12
  1361. // Default number of triangles
  1362. #define NOZZLE_CLEAN_TRIANGLES 3
  1363. // Specify positions as { X, Y, Z }
  1364. #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
  1365. #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
  1366. // Circular pattern radius
  1367. #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
  1368. // Circular pattern circle fragments number
  1369. #define NOZZLE_CLEAN_CIRCLE_FN 10
  1370. // Middle point of circle
  1371. #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
  1372. // Move the nozzle to the initial position after cleaning
  1373. #define NOZZLE_CLEAN_GOBACK
  1374. // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
  1375. //#define NOZZLE_CLEAN_NO_Z
  1376. #endif
  1377. /**
  1378. * Print Job Timer
  1379. *
  1380. * Automatically start and stop the print job timer on M104/M109/M190.
  1381. *
  1382. * M104 (hotend, no wait) - high temp = none, low temp = stop timer
  1383. * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
  1384. * M190 (bed, wait) - high temp = start timer, low temp = none
  1385. *
  1386. * The timer can also be controlled with the following commands:
  1387. *
  1388. * M75 - Start the print job timer
  1389. * M76 - Pause the print job timer
  1390. * M77 - Stop the print job timer
  1391. */
  1392. #define PRINTJOB_TIMER_AUTOSTART
  1393. /**
  1394. * Print Counter
  1395. *
  1396. * Track statistical data such as:
  1397. *
  1398. * - Total print jobs
  1399. * - Total successful print jobs
  1400. * - Total failed print jobs
  1401. * - Total time printing
  1402. *
  1403. * View the current statistics with M78.
  1404. */
  1405. //#define PRINTCOUNTER
  1406. //=============================================================================
  1407. //============================= LCD and SD support ============================
  1408. //=============================================================================
  1409. // @section lcd
  1410. /**
  1411. * LCD LANGUAGE
  1412. *
  1413. * Select the language to display on the LCD. These languages are available:
  1414. *
  1415. * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana,
  1416. * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test
  1417. *
  1418. * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  1419. */
  1420. #define LCD_LANGUAGE en
  1421. /**
  1422. * LCD Character Set
  1423. *
  1424. * Note: This option is NOT applicable to Graphical Displays.
  1425. *
  1426. * All character-based LCDs provide ASCII plus one of these
  1427. * language extensions:
  1428. *
  1429. * - JAPANESE ... the most common
  1430. * - WESTERN ... with more accented characters
  1431. * - CYRILLIC ... for the Russian language
  1432. *
  1433. * To determine the language extension installed on your controller:
  1434. *
  1435. * - Compile and upload with LCD_LANGUAGE set to 'test'
  1436. * - Click the controller to view the LCD menu
  1437. * - The LCD will display Japanese, Western, or Cyrillic text
  1438. *
  1439. * See http://marlinfw.org/docs/development/lcd_language.html
  1440. *
  1441. * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  1442. */
  1443. #define DISPLAY_CHARSET_HD44780 JAPANESE
  1444. /**
  1445. * Info Screen Style (0:Classic, 1:Prusa)
  1446. *
  1447. * :[0:'Classic', 1:'Prusa']
  1448. */
  1449. #define LCD_INFO_SCREEN_STYLE 0
  1450. /**
  1451. * SD CARD
  1452. *
  1453. * SD Card support is disabled by default. If your controller has an SD slot,
  1454. * you must uncomment the following option or it won't work.
  1455. *
  1456. */
  1457. #define SDSUPPORT
  1458. #define SDIO_SUPPORT // Note from Hobi : Added as was not present in the file...
  1459. /**
  1460. * SD CARD: SPI SPEED
  1461. *
  1462. * Enable one of the following items for a slower SPI transfer speed.
  1463. * This may be required to resolve "volume init" errors.
  1464. */
  1465. //#define SPI_SPEED SPI_HALF_SPEED
  1466. //#define SPI_SPEED SPI_QUARTER_SPEED
  1467. //#define SPI_SPEED SPI_EIGHTH_SPEED
  1468. /**
  1469. * SD CARD: ENABLE CRC
  1470. *
  1471. * Use CRC checks and retries on the SD communication.
  1472. */
  1473. //#define SD_CHECK_AND_RETRY
  1474. /**
  1475. * LCD Menu Items
  1476. *
  1477. * Disable all menus and only display the Status Screen, or
  1478. * just remove some extraneous menu items to recover space.
  1479. */
  1480. //#define NO_LCD_MENUS
  1481. //#define SLIM_LCD_MENUS
  1482. //
  1483. // ENCODER SETTINGS
  1484. //
  1485. // This option overrides the default number of encoder pulses needed to
  1486. // produce one step. Should be increased for high-resolution encoders.
  1487. //
  1488. //#define ENCODER_PULSES_PER_STEP 4
  1489. //
  1490. // Use this option to override the number of step signals required to
  1491. // move between next/prev menu items.
  1492. //
  1493. //#define ENCODER_STEPS_PER_MENU_ITEM 1
  1494. /**
  1495. * Encoder Direction Options
  1496. *
  1497. * Test your encoder's behavior first with both options disabled.
  1498. *
  1499. * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
  1500. * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
  1501. * Reversed Value Editing only? Enable BOTH options.
  1502. */
  1503. //
  1504. // This option reverses the encoder direction everywhere.
  1505. //
  1506. // Set this option if CLOCKWISE causes values to DECREASE
  1507. //
  1508. //#define REVERSE_ENCODER_DIRECTION
  1509. //
  1510. // This option reverses the encoder direction for navigating LCD menus.
  1511. //
  1512. // If CLOCKWISE normally moves DOWN this makes it go UP.
  1513. // If CLOCKWISE normally moves UP this makes it go DOWN.
  1514. //
  1515. //#define REVERSE_MENU_DIRECTION
  1516. //
  1517. // This option reverses the encoder direction for Select Screen.
  1518. //
  1519. // If CLOCKWISE normally moves LEFT this makes it go RIGHT.
  1520. // If CLOCKWISE normally moves RIGHT this makes it go LEFT.
  1521. //
  1522. //#define REVERSE_SELECT_DIRECTION
  1523. //
  1524. // Individual Axis Homing
  1525. //
  1526. // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
  1527. //
  1528. #define INDIVIDUAL_AXIS_HOMING_MENU
  1529. //
  1530. // SPEAKER/BUZZER
  1531. //
  1532. // If you have a speaker that can produce tones, enable it here.
  1533. // By default Marlin assumes you have a buzzer with a fixed frequency.
  1534. //
  1535. //#define SPEAKER
  1536. //
  1537. // The duration and frequency for the UI feedback sound.
  1538. // Set these to 0 to disable audio feedback in the LCD menus.
  1539. //
  1540. // Note: Test audio output with the G-Code:
  1541. // M300 S<frequency Hz> P<duration ms>
  1542. //
  1543. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 250
  1544. //#define LCD_FEEDBACK_FREQUENCY_HZ 1000
  1545. //=============================================================================
  1546. //======================== LCD / Controller Selection =========================
  1547. //======================== (Character-based LCDs) =========================
  1548. //=============================================================================
  1549. //
  1550. // RepRapDiscount Smart Controller.
  1551. // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
  1552. //
  1553. // Note: Usually sold with a white PCB.
  1554. //
  1555. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  1556. //
  1557. // Original RADDS LCD Display+Encoder+SDCardReader
  1558. // http://doku.radds.org/dokumentation/lcd-display/
  1559. //
  1560. //#define RADDS_DISPLAY
  1561. //
  1562. // ULTIMAKER Controller.
  1563. //
  1564. //#define ULTIMAKERCONTROLLER
  1565. //
  1566. // ULTIPANEL as seen on Thingiverse.
  1567. //
  1568. //#define ULTIPANEL
  1569. //
  1570. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  1571. // http://reprap.org/wiki/PanelOne
  1572. //
  1573. //#define PANEL_ONE
  1574. //
  1575. // GADGETS3D G3D LCD/SD Controller
  1576. // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  1577. //
  1578. // Note: Usually sold with a blue PCB.
  1579. //
  1580. //#define G3D_PANEL
  1581. //
  1582. // RigidBot Panel V1.0
  1583. // http://www.inventapart.com/
  1584. //
  1585. //#define RIGIDBOT_PANEL
  1586. //
  1587. // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
  1588. // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
  1589. //
  1590. //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
  1591. //
  1592. // ANET and Tronxy 20x4 Controller
  1593. //
  1594. //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
  1595. // This LCD is known to be susceptible to electrical interference
  1596. // which scrambles the display. Pressing any button clears it up.
  1597. // This is a LCD2004 display with 5 analog buttons.
  1598. //
  1599. // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
  1600. //
  1601. //#define ULTRA_LCD
  1602. //=============================================================================
  1603. //======================== LCD / Controller Selection =========================
  1604. //===================== (I2C and Shift-Register LCDs) =====================
  1605. //=============================================================================
  1606. //
  1607. // CONTROLLER TYPE: I2C
  1608. //
  1609. // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
  1610. // library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  1611. //
  1612. //
  1613. // Elefu RA Board Control Panel
  1614. // http://www.elefu.com/index.php?route=product/product&product_id=53
  1615. //
  1616. //#define RA_CONTROL_PANEL
  1617. //
  1618. // Sainsmart (YwRobot) LCD Displays
  1619. //
  1620. // These require F.Malpartida's LiquidCrystal_I2C library
  1621. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
  1622. //
  1623. //#define LCD_SAINSMART_I2C_1602
  1624. //#define LCD_SAINSMART_I2C_2004
  1625. //
  1626. // Generic LCM1602 LCD adapter
  1627. //
  1628. //#define LCM1602
  1629. //
  1630. // PANELOLU2 LCD with status LEDs,
  1631. // separate encoder and click inputs.
  1632. //
  1633. // Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
  1634. // For more info: https://github.com/lincomatic/LiquidTWI2
  1635. //
  1636. // Note: The PANELOLU2 encoder click input can either be directly connected to
  1637. // a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  1638. //
  1639. //#define LCD_I2C_PANELOLU2
  1640. //
  1641. // Panucatt VIKI LCD with status LEDs,
  1642. // integrated click & L/R/U/D buttons, separate encoder inputs.
  1643. //
  1644. //#define LCD_I2C_VIKI
  1645. //
  1646. // CONTROLLER TYPE: Shift register panels
  1647. //
  1648. //
  1649. // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
  1650. // LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
  1651. //
  1652. //#define SAV_3DLCD
  1653. //
  1654. // 3-wire SR LCD with strobe using 74HC4094
  1655. // https://github.com/mikeshub/SailfishLCD
  1656. // Uses the code directly from Sailfish
  1657. //
  1658. //#define FF_INTERFACEBOARD
  1659. //=============================================================================
  1660. //======================= LCD / Controller Selection =======================
  1661. //========================= (Graphical LCDs) ========================
  1662. //=============================================================================
  1663. //
  1664. // CONTROLLER TYPE: Graphical 128x64 (DOGM)
  1665. //
  1666. // IMPORTANT: The U8glib library is required for Graphical Display!
  1667. // https://github.com/olikraus/U8glib_Arduino
  1668. //
  1669. //
  1670. // RepRapDiscount FULL GRAPHIC Smart Controller
  1671. // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  1672. //
  1673. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  1674. //
  1675. // ReprapWorld Graphical LCD
  1676. // https://reprapworld.com/?products_details&products_id/1218
  1677. //
  1678. //#define REPRAPWORLD_GRAPHICAL_LCD
  1679. //
  1680. // Activate one of these if you have a Panucatt Devices
  1681. // Viki 2.0 or mini Viki with Graphic LCD
  1682. // http://panucatt.com
  1683. //
  1684. //#define VIKI2
  1685. //#define miniVIKI
  1686. //
  1687. // MakerLab Mini Panel with graphic
  1688. // controller and SD support - http://reprap.org/wiki/Mini_panel
  1689. //
  1690. //#define MINIPANEL
  1691. //
  1692. // MaKr3d Makr-Panel with graphic controller and SD support.
  1693. // http://reprap.org/wiki/MaKr3d_MaKrPanel
  1694. //
  1695. //#define MAKRPANEL
  1696. //
  1697. // Adafruit ST7565 Full Graphic Controller.
  1698. // https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  1699. //
  1700. //#define ELB_FULL_GRAPHIC_CONTROLLER
  1701. //
  1702. // BQ LCD Smart Controller shipped by
  1703. // default with the BQ Hephestos 2 and Witbox 2.
  1704. //
  1705. //#define BQ_LCD_SMART_CONTROLLER
  1706. //
  1707. // Cartesio UI
  1708. // http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
  1709. //
  1710. //#define CARTESIO_UI
  1711. //
  1712. // LCD for Melzi Card with Graphical LCD
  1713. //
  1714. //#define LCD_FOR_MELZI
  1715. //
  1716. // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
  1717. // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
  1718. //
  1719. //#define ULTI_CONTROLLER
  1720. //
  1721. // MKS MINI12864 with graphic controller and SD support
  1722. // https://reprap.org/wiki/MKS_MINI_12864
  1723. //
  1724. //#define MKS_MINI_12864
  1725. //
  1726. // FYSETC variant of the MINI12864 graphic controller with SD support
  1727. // https://wiki.fysetc.com/Mini12864_Panel/
  1728. //
  1729. //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
  1730. //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
  1731. //#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
  1732. //#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight
  1733. //
  1734. // Factory display for Creality CR-10
  1735. // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
  1736. //
  1737. // This is RAMPS-compatible using a single 10-pin connector.
  1738. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
  1739. //
  1740. //#define CR10_STOCKDISPLAY
  1741. //
  1742. // ANET and Tronxy Graphical Controller
  1743. //
  1744. // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
  1745. // A clone of the RepRapDiscount full graphics display but with
  1746. // different pins/wiring (see pins_ANET_10.h).
  1747. //
  1748. //#define ANET_FULL_GRAPHICS_LCD
  1749. //
  1750. // AZSMZ 12864 LCD with SD
  1751. // https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
  1752. //
  1753. //#define AZSMZ_12864
  1754. //
  1755. // Silvergate GLCD controller
  1756. // http://github.com/android444/Silvergate
  1757. //
  1758. //#define SILVER_GATE_GLCD_CONTROLLER
  1759. //=============================================================================
  1760. //============================== OLED Displays ==============================
  1761. //=============================================================================
  1762. //
  1763. // SSD1306 OLED full graphics generic display
  1764. //
  1765. //#define U8GLIB_SSD1306
  1766. //
  1767. // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
  1768. //
  1769. //#define SAV_3DGLCD
  1770. #if ENABLED(SAV_3DGLCD)
  1771. #define U8GLIB_SSD1306
  1772. //#define U8GLIB_SH1106
  1773. #endif
  1774. //
  1775. // TinyBoy2 128x64 OLED / Encoder Panel
  1776. //
  1777. //#define OLED_PANEL_TINYBOY2
  1778. //
  1779. // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
  1780. // http://reprap.org/wiki/MKS_12864OLED
  1781. //
  1782. // Tiny, but very sharp OLED display
  1783. //
  1784. //#define MKS_12864OLED // Uses the SH1106 controller (default)
  1785. //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
  1786. //
  1787. // Einstart S OLED SSD1306
  1788. //
  1789. //#define U8GLIB_SH1106_EINSTART
  1790. //
  1791. // Overlord OLED display/controller with i2c buzzer and LEDs
  1792. //
  1793. //#define OVERLORD_OLED
  1794. //=============================================================================
  1795. //========================== Extensible UI Displays ===========================
  1796. //=============================================================================
  1797. //
  1798. // DGUS Touch Display with DWIN OS
  1799. //
  1800. //#define DGUS_LCD
  1801. //
  1802. // Touch-screen LCD for Malyan M200 printers
  1803. //
  1804. //#define MALYAN_LCD
  1805. //
  1806. // LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
  1807. // See Configuration_adv.h for all configuration options.
  1808. //
  1809. //#define LULZBOT_TOUCH_UI
  1810. //
  1811. // Third-party or vendor-customized controller interfaces.
  1812. // Sources should be installed in 'src/lcd/extensible_ui'.
  1813. //
  1814. //#define EXTENSIBLE_UI
  1815. //=============================================================================
  1816. //=============================== Graphical TFTs ==============================
  1817. //=============================================================================
  1818. //
  1819. // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.)
  1820. //
  1821. #define FSMC_GRAPHICAL_TFT
  1822. //=============================================================================
  1823. //============================ Other Controllers ============================
  1824. //=============================================================================
  1825. //
  1826. // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
  1827. //
  1828. #define TOUCH_BUTTONS
  1829. #if ENABLED(TOUCH_BUTTONS)
  1830. #define TOUCH_CALIBRATION // Include user calibration widget in menus (Alfawise)
  1831. #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
  1832. #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus
  1833. #if ENABLED(TS_V11)
  1834. // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen
  1835. #define XPT2046_X_CALIBRATION 12000
  1836. #define XPT2046_Y_CALIBRATION 9000
  1837. #define XPT2046_X_OFFSET -24
  1838. #define XPT2046_Y_OFFSET -17
  1839. #endif
  1840. #if ENABLED(TS_V12)
  1841. // Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen
  1842. #define XPT2046_X_CALIBRATION 12000
  1843. #define XPT2046_Y_CALIBRATION -9000
  1844. #define XPT2046_X_OFFSET -43
  1845. #define XPT2046_Y_OFFSET 257
  1846. #endif
  1847. #if ENABLED(TS_V19)
  1848. // Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D
  1849. #define XPT2046_X_CALIBRATION -12000
  1850. #define XPT2046_Y_CALIBRATION 9000
  1851. #define XPT2046_X_OFFSET 320
  1852. #define XPT2046_Y_OFFSET 0
  1853. #endif
  1854. #endif
  1855. //
  1856. // RepRapWorld REPRAPWORLD_KEYPAD v1.1
  1857. // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
  1858. //
  1859. //#define REPRAPWORLD_KEYPAD
  1860. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
  1861. //=============================================================================
  1862. //=============================== Extra Features ==============================
  1863. //=============================================================================
  1864. // @section extras
  1865. // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
  1866. //#define FAST_PWM_FAN
  1867. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  1868. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  1869. // is too low, you should also increment SOFT_PWM_SCALE.
  1870. //#define FAN_SOFT_PWM
  1871. // Incrementing this by 1 will double the software PWM frequency,
  1872. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  1873. // However, control resolution will be halved for each increment;
  1874. // at zero value, there are 128 effective control positions.
  1875. // :[0,1,2,3,4,5,6,7]
  1876. #define SOFT_PWM_SCALE 0
  1877. // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
  1878. // be used to mitigate the associated resolution loss. If enabled,
  1879. // some of the PWM cycles are stretched so on average the desired
  1880. // duty cycle is attained.
  1881. //#define SOFT_PWM_DITHER
  1882. // Temperature status LEDs that display the hotend and bed temperature.
  1883. // If all hotends, bed temperature, and target temperature are under 54C
  1884. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
  1885. //#define TEMP_STAT_LEDS
  1886. // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
  1887. //#define SF_ARC_FIX
  1888. // Support for the BariCUDA Paste Extruder
  1889. //#define BARICUDA
  1890. // Support for BlinkM/CyzRgb
  1891. //#define BLINKM
  1892. // Support for PCA9632 PWM LED driver
  1893. //#define PCA9632
  1894. // Support for PCA9533 PWM LED driver
  1895. // https://github.com/mikeshub/SailfishRGB_LED
  1896. //#define PCA9533
  1897. /**
  1898. * RGB LED / LED Strip Control
  1899. *
  1900. * Enable support for an RGB LED connected to 5V digital pins, or
  1901. * an RGB Strip connected to MOSFETs controlled by digital pins.
  1902. *
  1903. * Adds the M150 command to set the LED (or LED strip) color.
  1904. * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  1905. * luminance values can be set from 0 to 255.
  1906. * For Neopixel LED an overall brightness parameter is also available.
  1907. *
  1908. * *** CAUTION ***
  1909. * LED Strips require a MOSFET Chip between PWM lines and LEDs,
  1910. * as the Arduino cannot handle the current the LEDs will require.
  1911. * Failure to follow this precaution can destroy your Arduino!
  1912. * NOTE: A separate 5V power supply is required! The Neopixel LED needs
  1913. * more current than the Arduino 5V linear regulator can produce.
  1914. * *** CAUTION ***
  1915. *
  1916. * LED Type. Enable only one of the following two options.
  1917. *
  1918. */
  1919. //#define RGB_LED
  1920. //#define RGBW_LED
  1921. #if EITHER(RGB_LED, RGBW_LED)
  1922. //#define RGB_LED_R_PIN 34
  1923. //#define RGB_LED_G_PIN 43
  1924. //#define RGB_LED_B_PIN 35
  1925. //#define RGB_LED_W_PIN -1
  1926. #endif
  1927. // Support for Adafruit Neopixel LED driver
  1928. //#define NEOPIXEL_LED
  1929. #if ENABLED(NEOPIXEL_LED)
  1930. #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
  1931. #define NEOPIXEL_PIN 4 // LED driving pin
  1932. //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
  1933. //#define NEOPIXEL2_PIN 5
  1934. #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
  1935. #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
  1936. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
  1937. //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
  1938. // Use a single Neopixel LED for static (background) lighting
  1939. //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use
  1940. //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
  1941. #endif
  1942. /**
  1943. * Printer Event LEDs
  1944. *
  1945. * During printing, the LEDs will reflect the printer status:
  1946. *
  1947. * - Gradually change from blue to violet as the heated bed gets to target temp
  1948. * - Gradually change from violet to red as the hotend gets to temperature
  1949. * - Change to white to illuminate work surface
  1950. * - Change to green once print has finished
  1951. * - Turn off after the print has finished and the user has pushed a button
  1952. */
  1953. #if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  1954. #define PRINTER_EVENT_LEDS
  1955. #endif
  1956. /**
  1957. * R/C SERVO support
  1958. * Sponsored by TrinityLabs, Reworked by codexmas
  1959. */
  1960. /**
  1961. * Number of servos
  1962. *
  1963. * For some servo-related options NUM_SERVOS will be set automatically.
  1964. * Set this manually if there are extra servos needing manual control.
  1965. * Leave undefined or set to 0 to entirely disable the servo subsystem.
  1966. */
  1967. //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
  1968. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
  1969. // 300ms is a good value but you can try less delay.
  1970. // If the servo can't reach the requested position, increase it.
  1971. #define SERVO_DELAY { 300 }
  1972. // Only power servos during movement, otherwise leave off to prevent jitter
  1973. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  1974. // Allow servo angle to be edited and saved to EEPROM
  1975. //#define EDITABLE_SERVO_ANGLES