My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Configuration.h 82KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Configuration.h
  25. *
  26. * Basic settings such as:
  27. *
  28. * - Type of electronics
  29. * - Type of temperature sensor
  30. * - Printer geometry
  31. * - Endstop configuration
  32. * - LCD controller
  33. * - Extra features
  34. *
  35. * Advanced settings can be found in Configuration_adv.h
  36. *
  37. */
  38. #define CONFIGURATION_H_VERSION 020000
  39. //===========================================================================
  40. //============================= Getting Started =============================
  41. //===========================================================================
  42. /**
  43. * Here are some standard links for getting your machine calibrated:
  44. *
  45. * http://reprap.org/wiki/Calibration
  46. * http://youtu.be/wAL9d7FgInk
  47. * http://calculator.josefprusa.cz
  48. * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  49. * http://www.thingiverse.com/thing:5573
  50. * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  51. * http://www.thingiverse.com/thing:298812
  52. */
  53. //===========================================================================
  54. //============================= DELTA Printer ===============================
  55. //===========================================================================
  56. // For a Delta printer start with one of the configuration files in the
  57. // config/examples/delta directory and customize for your machine.
  58. //
  59. //===========================================================================
  60. //============================= SCARA Printer ===============================
  61. //===========================================================================
  62. // For a SCARA printer start with the configuration files in
  63. // config/examples/SCARA and customize for your machine.
  64. //
  65. //===========================================================================
  66. //============================= Alfawise Printer ============================
  67. //===========================================================================
  68. // Forum link to help with a tutorial, in French! :
  69. // https://www.lesimprimantes3d.fr/forum/topic/18260-alfawise-u20x-u30-marlin-2x-firmware-alternatif/
  70. //
  71. // 1 - Select your Alfawise U30 or U20 or U20+ printer (NO MORE REQUIRED HERE)
  72. // and the touchscreen version, either 1.1 or 1.2. Most recent in France are v1.2 (blue pcb)
  73. // These defines are set in platformio.ini build parameters, sample for U20 -DU20 -DTS_V12
  74. // U20_PLUS was not tested, as we do not have a printer to test. Print bed PID settings MUST be tuned for it.
  75. // Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4
  76. // Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19
  77. // 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white,
  78. // Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed
  79. // with the proper boot sequence to be developped.
  80. #define LCD_READ_ID 0xD3 // Read display identification information in reg ID4 0xD3, for ILI9341 screens
  81. //#define LCD_READ_ID 0x04 // Read display identification information in reg ID1 0x04 - ST7789V / ILI9328 or others
  82. //===========================================================================
  83. // @section info
  84. // Author info of this build printed to the host during boot and M115
  85. #define STRING_CONFIG_H_AUTHOR "Hobi, tpruvot" // Who made the changes.
  86. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
  87. /**
  88. * *** VENDORS PLEASE READ ***
  89. *
  90. * Marlin allows you to add a custom boot image for Graphical LCDs.
  91. * With this option Marlin will first show your custom screen followed
  92. * by the standard Marlin logo with version number and web URL.
  93. *
  94. * We encourage you to take advantage of this new feature and we also
  95. * respectfully request that you retain the unmodified Marlin boot screen.
  96. */
  97. // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
  98. #define SHOW_BOOTSCREEN
  99. // Show the bitmap in Marlin/_Bootscreen.h on startup.
  100. //#define SHOW_CUSTOM_BOOTSCREEN
  101. // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
  102. #define CUSTOM_STATUS_SCREEN_IMAGE
  103. // @section machine
  104. /**
  105. * Select the serial port on the board to use for communication with the host.
  106. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  107. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  108. *
  109. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  110. */
  111. #define SERIAL_PORT 1
  112. /**
  113. * Select a secondary serial port on the board to use for communication with the host.
  114. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  115. * Serial port -1 is the USB emulated serial port, if available.
  116. *
  117. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  118. */
  119. //#define SERIAL_PORT_2 2
  120. /**
  121. * This setting determines the communication speed of the printer.
  122. *
  123. * 250000 works in most cases, but you might try a lower speed if
  124. * you commonly experience drop-outs during host printing.
  125. * You may try up to 1000000 to speed up SD file transfer.
  126. *
  127. * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  128. */
  129. #define BAUDRATE 250000
  130. // Enable the Bluetooth serial interface on AT90USB devices
  131. //#define BLUETOOTH
  132. // Choose the name from boards.h that matches your setup
  133. #ifndef MOTHERBOARD
  134. #define MOTHERBOARD BOARD_LONGER3D_LK
  135. #endif
  136. // Name displayed in the LCD "Ready" message and Info menu
  137. //#define CUSTOM_MACHINE_NAME "3D Printer"
  138. #ifdef U20
  139. #define CUSTOM_MACHINE_NAME "Alfawise U20"
  140. #elif defined(U30)
  141. #define CUSTOM_MACHINE_NAME "Alfawise U30"
  142. #elif defined(U20_PLUS)
  143. #define CUSTOM_MACHINE_NAME "Alfawise U20+"
  144. #elif defined(LK1)
  145. #define CUSTOM_MACHINE_NAME "Longer3D LK1"
  146. #elif defined(LK2)
  147. #define CUSTOM_MACHINE_NAME "Longer3D LK2"
  148. #elif defined(LK4)
  149. #define CUSTOM_MACHINE_NAME "Longer3D LK4"
  150. #endif
  151. // Printer's unique ID, used by some programs to differentiate between machines.
  152. // Choose your own or use a service like http://www.uuidgenerator.net/version4
  153. //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
  154. // @section extruder
  155. // This defines the number of extruders
  156. // :[1, 2, 3, 4, 5, 6]
  157. #define EXTRUDERS 1
  158. // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
  159. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
  160. // For Cyclops or any "multi-extruder" that shares a single nozzle.
  161. //#define SINGLENOZZLE
  162. /**
  163. * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
  164. *
  165. * This device allows one stepper driver on a control board to drive
  166. * two to eight stepper motors, one at a time, in a manner suitable
  167. * for extruders.
  168. *
  169. * This option only allows the multiplexer to switch on tool-change.
  170. * Additional options to configure custom E moves are pending.
  171. */
  172. //#define MK2_MULTIPLEXER
  173. #if ENABLED(MK2_MULTIPLEXER)
  174. // Override the default DIO selector pins here, if needed.
  175. // Some pins files may provide defaults for these pins.
  176. //#define E_MUX0_PIN 40 // Always Required
  177. //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
  178. //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
  179. #endif
  180. /**
  181. * Prusa Multi-Material Unit v2
  182. *
  183. * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  184. * Requires EXTRUDERS = 5
  185. *
  186. * For additional configuration see Configuration_adv.h
  187. */
  188. //#define PRUSA_MMU2
  189. // A dual extruder that uses a single stepper motor
  190. //#define SWITCHING_EXTRUDER
  191. #if ENABLED(SWITCHING_EXTRUDER)
  192. #define SWITCHING_EXTRUDER_SERVO_NR 0
  193. #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
  194. #if EXTRUDERS > 3
  195. #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
  196. #endif
  197. #endif
  198. // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
  199. //#define SWITCHING_NOZZLE
  200. #if ENABLED(SWITCHING_NOZZLE)
  201. #define SWITCHING_NOZZLE_SERVO_NR 0
  202. //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
  203. #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo)
  204. #endif
  205. /**
  206. * Two separate X-carriages with extruders that connect to a moving part
  207. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
  208. */
  209. //#define PARKING_EXTRUDER
  210. /**
  211. * Two separate X-carriages with extruders that connect to a moving part
  212. * via a magnetic docking mechanism using movements and no solenoid
  213. *
  214. * project : https://www.thingiverse.com/thing:3080893
  215. * movements : https://youtu.be/0xCEiG9VS3k
  216. * https://youtu.be/Bqbcs0CU2FE
  217. */
  218. //#define MAGNETIC_PARKING_EXTRUDER
  219. #if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  220. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
  221. #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
  222. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  223. #if ENABLED(PARKING_EXTRUDER)
  224. #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
  225. #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
  226. #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined.
  227. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  228. #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
  229. #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point
  230. #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple
  231. #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point
  232. #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling
  233. #endif
  234. #endif
  235. /**
  236. * Switching Toolhead
  237. *
  238. * Support for swappable and dockable toolheads, such as
  239. * the E3D Tool Changer. Toolheads are locked with a servo.
  240. */
  241. //#define SWITCHING_TOOLHEAD
  242. /**
  243. * Magnetic Switching Toolhead
  244. *
  245. * Support swappable and dockable toolheads with a magnetic
  246. * docking mechanism using movement and no servo.
  247. */
  248. //#define MAGNETIC_SWITCHING_TOOLHEAD
  249. /**
  250. * Electromagnetic Switching Toolhead
  251. *
  252. * Parking for CoreXY / HBot kinematics.
  253. * Toolheads are parked at one edge and held with an electromagnet.
  254. * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
  255. */
  256. //#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
  257. #if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  258. #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
  259. #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
  260. #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
  261. #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
  262. #if ENABLED(SWITCHING_TOOLHEAD)
  263. #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
  264. #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
  265. #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
  266. #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
  267. #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
  268. //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
  269. #if ENABLED(PRIME_BEFORE_REMOVE)
  270. #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
  271. #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
  272. #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
  273. #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
  274. #endif
  275. #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  276. #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
  277. #endif
  278. #endif
  279. /**
  280. * "Mixing Extruder"
  281. * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
  282. * - Extends the stepping routines to move multiple steppers in proportion to the mix.
  283. * - Optional support for Repetier Firmware's 'M164 S<index>' supporting virtual tools.
  284. * - This implementation supports up to two mixing extruders.
  285. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
  286. */
  287. //#define MIXING_EXTRUDER
  288. #if ENABLED(MIXING_EXTRUDER)
  289. #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
  290. #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
  291. //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
  292. //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD
  293. #if ENABLED(GRADIENT_MIX)
  294. //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias
  295. #endif
  296. #endif
  297. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  298. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  299. // For the other hotends it is their distance from the extruder 0 hotend.
  300. //#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
  301. //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
  302. //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
  303. // @section machine
  304. /**
  305. * Power Supply Control
  306. *
  307. * Enable and connect the power supply to the PS_ON_PIN.
  308. * Specify whether the power supply is active HIGH or active LOW.
  309. */
  310. //#define PSU_CONTROL
  311. #define PSU_NAME "360W 24V/15A"
  312. #if ENABLED(PSU_CONTROL)
  313. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
  314. //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
  315. //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
  316. #if ENABLED(AUTO_POWER_CONTROL)
  317. #define AUTO_POWER_FANS // Turn on PSU if fans need power
  318. #define AUTO_POWER_E_FANS
  319. #define AUTO_POWER_CONTROLLERFAN
  320. #define AUTO_POWER_CHAMBER_FAN
  321. //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
  322. //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
  323. #define POWER_TIMEOUT 30
  324. #endif
  325. #endif
  326. // @section temperature
  327. //===========================================================================
  328. //============================= Thermal Settings ============================
  329. //===========================================================================
  330. /**
  331. * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  332. *
  333. * Temperature sensors available:
  334. *
  335. * -4 : thermocouple with AD8495
  336. * -3 : thermocouple with MAX31855 (only for sensor 0)
  337. * -2 : thermocouple with MAX6675 (only for sensor 0)
  338. * -1 : thermocouple with AD595
  339. * 0 : not used
  340. * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  341. * 331 : (3.3V scaled thermistor 1 table)
  342. * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  343. * 3 : Mendel-parts thermistor (4.7k pullup)
  344. * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  345. * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
  346. * 501 : 100K Zonestar (Tronxy X3A) Thermistor
  347. * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  348. * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  349. * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  350. * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  351. * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  352. * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  353. * 10 : 100k RS thermistor 198-961 (4.7k pullup)
  354. * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
  355. * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  356. * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  357. * 15 : 100k thermistor calibration for JGAurora A5 hotend
  358. * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
  359. * 20 : Pt100 with circuit in the Ultimainboard V2.x
  360. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  361. * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  362. * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
  363. * 66 : 4.7M High Temperature thermistor from Dyze Design
  364. * 67 : 450C thermistor from SliceEngineering
  365. * 70 : the 100K thermistor found in the bq Hephestos 2
  366. * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
  367. * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
  368. *
  369. * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
  370. * (but gives greater accuracy and more stable PID)
  371. * 51 : 100k thermistor - EPCOS (1k pullup)
  372. * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  373. * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  374. *
  375. * 1047 : Pt1000 with 4k7 pullup
  376. * 1010 : Pt1000 with 1k pullup (non standard)
  377. * 147 : Pt100 with 4k7 pullup
  378. * 110 : Pt100 with 1k pullup (non standard)
  379. *
  380. * 1000 : Custom - Specify parameters in Configuration_adv.h
  381. *
  382. * Use these for Testing or Development purposes. NEVER for production machine.
  383. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  384. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  385. */
  386. #define TEMP_SENSOR_0 1
  387. #define TEMP_SENSOR_1 0
  388. #define TEMP_SENSOR_2 0
  389. #define TEMP_SENSOR_3 0
  390. #define TEMP_SENSOR_4 0
  391. #define TEMP_SENSOR_5 0
  392. #define TEMP_SENSOR_BED 1
  393. #define TEMP_SENSOR_CHAMBER 0
  394. // Dummy thermistor constant temperature readings, for use with 998 and 999
  395. #define DUMMY_THERMISTOR_998_VALUE 25
  396. #define DUMMY_THERMISTOR_999_VALUE 100
  397. // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
  398. // from the two sensors differ too much the print will be aborted.
  399. //#define TEMP_SENSOR_1_AS_REDUNDANT
  400. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  401. #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
  402. #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  403. #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  404. #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
  405. #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  406. #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  407. // Below this temperature the heater will be switched off
  408. // because it probably indicates a broken thermistor wire.
  409. #define HEATER_0_MINTEMP 5
  410. #define HEATER_1_MINTEMP 5
  411. #define HEATER_2_MINTEMP 5
  412. #define HEATER_3_MINTEMP 5
  413. #define HEATER_4_MINTEMP 5
  414. #define HEATER_5_MINTEMP 5
  415. #define BED_MINTEMP 5
  416. // Above this temperature the heater will be switched off.
  417. // This can protect components from overheating, but NOT from shorts and failures.
  418. // (Use MINTEMP for thermistor short/failure protection.)
  419. #define HEATER_0_MAXTEMP 275
  420. #define HEATER_1_MAXTEMP 275
  421. #define HEATER_2_MAXTEMP 275
  422. #define HEATER_3_MAXTEMP 275
  423. #define HEATER_4_MAXTEMP 275
  424. #define HEATER_5_MAXTEMP 275
  425. #define BED_MAXTEMP 150
  426. //===========================================================================
  427. //============================= PID Settings ================================
  428. //===========================================================================
  429. // PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
  430. // Comment the following line to disable PID and enable bang-bang.
  431. #define PIDTEMP
  432. #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
  433. #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  434. #define PID_K1 0.95 // Smoothing factor within any PID loop
  435. #if ENABLED(PIDTEMP)
  436. //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
  437. //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
  438. //#define PID_DEBUG // Sends debug data to the serial port.
  439. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  440. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  441. //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
  442. // Set/get with gcode: M301 E[extruder number, 0-2]
  443. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  444. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  445. // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
  446. // Alfawise U30/U20
  447. // Please refine the PID settings for your own machine to avoid the E1 hotend error. These a basic settings allowing first startups.
  448. // Use the command M303 E0 S200 C8 each time you make any changes to your extruder
  449. #define DEFAULT_Kp 17.22
  450. #define DEFAULT_Ki 1.00
  451. #define DEFAULT_Kd 74.22
  452. // MakerGear
  453. //#define DEFAULT_Kp 7.0
  454. //#define DEFAULT_Ki 0.1
  455. //#define DEFAULT_Kd 12
  456. // Mendel Parts V9 on 12V
  457. //#define DEFAULT_Kp 63.0
  458. //#define DEFAULT_Ki 2.25
  459. //#define DEFAULT_Kd 440
  460. #endif // PIDTEMP
  461. //===========================================================================
  462. //====================== PID > Bed Temperature Control ======================
  463. //===========================================================================
  464. /**
  465. * PID Bed Heating
  466. *
  467. * If this option is enabled set PID constants below.
  468. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
  469. *
  470. * The PID frequency will be the same as the extruder PWM.
  471. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  472. * which is fine for driving a square wave into a resistive load and does not significantly
  473. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
  474. * heater. If your configuration is significantly different than this and you don't understand
  475. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  476. */
  477. #define PIDTEMPBED
  478. //#define BED_LIMIT_SWITCHING
  479. /**
  480. * Max Bed Power
  481. * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
  482. * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  483. * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  484. */
  485. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  486. #if ENABLED(PIDTEMPBED)
  487. //#define MIN_BED_POWER 0
  488. //#define PID_BED_DEBUG // Sends debug data to the serial port.
  489. //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  490. //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  491. //#define DEFAULT_bedKp 10.00
  492. //#define DEFAULT_bedKi .023
  493. //#define DEFAULT_bedKd 305.4
  494. //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  495. //from pidautotune
  496. //#define DEFAULT_bedKp 97.1
  497. //#define DEFAULT_bedKi 1.41
  498. //#define DEFAULT_bedKd 1675.16
  499. #if defined(U30) || defined(LK2) || defined(LK4)
  500. //From M303 command for Alfawise U30 :
  501. #define DEFAULT_bedKp 338.46
  502. #define DEFAULT_bedKi 63.96
  503. #define DEFAULT_bedKd 447.78
  504. #endif
  505. #if defined(U20) || defined(LK1)
  506. //From M303 command for Alfawise U20 :
  507. #define DEFAULT_bedKp 841.68
  508. #define DEFAULT_bedKi 152.12
  509. #define DEFAULT_bedKd 1164.25
  510. #endif
  511. #ifdef U20_PLUS
  512. // These PID setting MUST be updated.
  513. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  514. #define DEFAULT_bedKp 841.68
  515. #define DEFAULT_bedKi 152.12
  516. #define DEFAULT_bedKd 1164.25
  517. #endif
  518. #endif // PIDTEMPBED
  519. // @section extruder
  520. /**
  521. * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
  522. * Add M302 to set the minimum extrusion temperature and/or turn
  523. * cold extrusion prevention on and off.
  524. *
  525. * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
  526. */
  527. #define PREVENT_COLD_EXTRUSION
  528. #define EXTRUDE_MINTEMP 170
  529. /**
  530. * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
  531. * Note: For Bowden Extruders make this large enough to allow load/unload.
  532. */
  533. #define PREVENT_LENGTHY_EXTRUDE
  534. #define EXTRUDE_MAXLENGTH 200
  535. //===========================================================================
  536. //======================== Thermal Runaway Protection =======================
  537. //===========================================================================
  538. /**
  539. * Thermal Protection provides additional protection to your printer from damage
  540. * and fire. Marlin always includes safe min and max temperature ranges which
  541. * protect against a broken or disconnected thermistor wire.
  542. *
  543. * The issue: If a thermistor falls out, it will report the much lower
  544. * temperature of the air in the room, and the the firmware will keep
  545. * the heater on.
  546. *
  547. * If you get "Thermal Runaway" or "Heating failed" errors the
  548. * details can be tuned in Configuration_adv.h
  549. */
  550. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  551. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  552. //#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
  553. //===========================================================================
  554. //============================= Mechanical Settings =========================
  555. //===========================================================================
  556. // @section machine
  557. // Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
  558. // either in the usual order or reversed
  559. //#define COREXY
  560. //#define COREXZ
  561. //#define COREYZ
  562. //#define COREYX
  563. //#define COREZX
  564. //#define COREZY
  565. //===========================================================================
  566. //============================== Endstop Settings ===========================
  567. //===========================================================================
  568. // @section homing
  569. // Specify here all the endstop connectors that are connected to any endstop or probe.
  570. // Almost all printers will be using one per axis. Probes will use one or more of the
  571. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
  572. #define USE_XMIN_PLUG
  573. #define USE_YMIN_PLUG
  574. #define USE_ZMIN_PLUG
  575. //#define USE_XMAX_PLUG
  576. //#define USE_YMAX_PLUG
  577. //#define USE_ZMAX_PLUG
  578. // Enable pullup for all endstops to prevent a floating state
  579. //#define ENDSTOPPULLUPS
  580. #if DISABLED(ENDSTOPPULLUPS)
  581. // Disable ENDSTOPPULLUPS to set pullups individually
  582. //#define ENDSTOPPULLUP_XMAX
  583. //#define ENDSTOPPULLUP_YMAX
  584. //#define ENDSTOPPULLUP_ZMAX
  585. //#define ENDSTOPPULLUP_XMIN
  586. //#define ENDSTOPPULLUP_YMIN
  587. //#define ENDSTOPPULLUP_ZMIN
  588. //#define ENDSTOPPULLUP_ZMIN_PROBE
  589. #endif
  590. // Enable pulldown for all endstops to prevent a floating state
  591. //#define ENDSTOPPULLDOWNS
  592. #if DISABLED(ENDSTOPPULLDOWNS)
  593. // Disable ENDSTOPPULLDOWNS to set pulldowns individually
  594. //#define ENDSTOPPULLDOWN_XMAX
  595. //#define ENDSTOPPULLDOWN_YMAX
  596. //#define ENDSTOPPULLDOWN_ZMAX
  597. //#define ENDSTOPPULLDOWN_XMIN
  598. //#define ENDSTOPPULLDOWN_YMIN
  599. //#define ENDSTOPPULLDOWN_ZMIN
  600. //#define ENDSTOPPULLDOWN_ZMIN_PROBE
  601. #endif
  602. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  603. #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  604. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  605. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  606. #define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  607. #define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  608. #define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  609. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
  610. /**
  611. * Stepper Drivers
  612. *
  613. * These settings allow Marlin to tune stepper driver timing and enable advanced options for
  614. * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
  615. *
  616. * A4988 is assumed for unspecified drivers.
  617. *
  618. * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  619. * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
  620. * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
  621. * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
  622. * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  623. * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  624. */
  625. #define X_DRIVER_TYPE A4988
  626. #define Y_DRIVER_TYPE A4988
  627. #define Z_DRIVER_TYPE A4988
  628. //#define X2_DRIVER_TYPE A4988
  629. //#define Y2_DRIVER_TYPE A4988
  630. //#define Z2_DRIVER_TYPE A4988
  631. //#define Z3_DRIVER_TYPE A4988
  632. #define E0_DRIVER_TYPE A4988
  633. //#define E1_DRIVER_TYPE A4988
  634. //#define E2_DRIVER_TYPE A4988
  635. //#define E3_DRIVER_TYPE A4988
  636. //#define E4_DRIVER_TYPE A4988
  637. //#define E5_DRIVER_TYPE A4988
  638. // Enable this feature if all enabled endstop pins are interrupt-capable.
  639. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
  640. #define ENDSTOP_INTERRUPTS_FEATURE
  641. /**
  642. * Endstop Noise Threshold
  643. *
  644. * Enable if your probe or endstops falsely trigger due to noise.
  645. *
  646. * - Higher values may affect repeatability or accuracy of some bed probes.
  647. * - To fix noise install a 100nF ceramic capacitor inline with the switch.
  648. * - This feature is not required for common micro-switches mounted on PCBs
  649. * based on the Makerbot design, which already have the 100nF capacitor.
  650. *
  651. * :[2,3,4,5,6,7]
  652. */
  653. //#define ENDSTOP_NOISE_THRESHOLD 2
  654. //=============================================================================
  655. //============================== Movement Settings ============================
  656. //=============================================================================
  657. // @section motion
  658. /**
  659. * Default Settings
  660. *
  661. * These settings can be reset by M502
  662. *
  663. * Note that if EEPROM is enabled, saved values will override these.
  664. */
  665. /**
  666. * With this option each E stepper can have its own factors for the
  667. * following movement settings. If fewer factors are given than the
  668. * total number of extruders, the last value applies to the rest.
  669. */
  670. //#define DISTINCT_E_FACTORS
  671. /**
  672. * Default Axis Steps Per Unit (steps/mm)
  673. * Override with M92
  674. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  675. */
  676. #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 }
  677. /**
  678. * Default Max Feed Rate (mm/s)
  679. * Override with M203
  680. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  681. */
  682. #define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 }
  683. #define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
  684. #if ENABLED(LIMITED_MAX_FR_EDITING)
  685. #define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits
  686. #endif
  687. /**
  688. * Default Max Acceleration (change/s) change = mm/s
  689. * (Maximum start speed for accelerated moves)
  690. * Override with M201
  691. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  692. */
  693. #define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 }
  694. #define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
  695. #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
  696. #define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits
  697. #endif
  698. /**
  699. * Default Acceleration (change/s) change = mm/s
  700. * Override with M204
  701. *
  702. * M204 P Acceleration
  703. * M204 R Retract Acceleration
  704. * M204 T Travel Acceleration
  705. */
  706. #define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves
  707. #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
  708. #define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves
  709. /**
  710. * Default Jerk limits (mm/s)
  711. * Override with M205 X Y Z E
  712. *
  713. * "Jerk" specifies the minimum speed change that requires acceleration.
  714. * When changing speed and direction, if the difference is less than the
  715. * value set here, it may happen instantaneously.
  716. */
  717. #define CLASSIC_JERK
  718. #if ENABLED(CLASSIC_JERK)
  719. #define DEFAULT_XJERK 10.0
  720. #define DEFAULT_YJERK 10.0
  721. #define DEFAULT_ZJERK 0.4
  722. #define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
  723. #if ENABLED(LIMITED_JERK_EDITING)
  724. #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
  725. #endif
  726. #endif
  727. #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
  728. /**
  729. * Junction Deviation Factor
  730. *
  731. * See:
  732. * https://reprap.org/forum/read.php?1,739819
  733. * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  734. */
  735. #if DISABLED(CLASSIC_JERK)
  736. #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge
  737. #endif
  738. /**
  739. * S-Curve Acceleration
  740. *
  741. * This option eliminates vibration during printing by fitting a Bézier
  742. * curve to move acceleration, producing much smoother direction changes.
  743. *
  744. * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  745. */
  746. //#define S_CURVE_ACCELERATION
  747. //===========================================================================
  748. //============================= Z Probe Options =============================
  749. //===========================================================================
  750. // @section probes
  751. //
  752. // See http://marlinfw.org/docs/configuration/probes.html
  753. //
  754. /**
  755. * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  756. *
  757. * Enable this option for a probe connected to the Z Min endstop pin.
  758. */
  759. #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  760. /**
  761. * Z_MIN_PROBE_PIN
  762. *
  763. * Define this pin if the probe is not connected to Z_MIN_PIN.
  764. * If not defined the default pin for the selected MOTHERBOARD
  765. * will be used. Most of the time the default is what you want.
  766. *
  767. * - The simplest option is to use a free endstop connector.
  768. * - Use 5V for powered (usually inductive) sensors.
  769. *
  770. * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
  771. * - For simple switches connect...
  772. * - normally-closed switches to GND and D32.
  773. * - normally-open switches to 5V and D32.
  774. *
  775. */
  776. //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
  777. /**
  778. * Probe Type
  779. *
  780. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
  781. * Activate one of these to use Auto Bed Leveling below.
  782. */
  783. /**
  784. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
  785. * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  786. * or (with LCD_BED_LEVELING) the LCD controller.
  787. */
  788. #define PROBE_MANUALLY
  789. #define MANUAL_PROBE_START_Z 0.2
  790. /**
  791. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  792. * (e.g., an inductive probe or a nozzle-based probe-switch.)
  793. */
  794. //#define FIX_MOUNTED_PROBE
  795. /**
  796. * Z Servo Probe, such as an endstop switch on a rotating arm.
  797. */
  798. //#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
  799. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
  800. /**
  801. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  802. */
  803. //#define BLTOUCH
  804. /**
  805. * Touch-MI Probe by hotends.fr
  806. *
  807. * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
  808. * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
  809. * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
  810. *
  811. * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
  812. * and a minimum Z_HOMING_HEIGHT of 10.
  813. */
  814. //#define TOUCH_MI_PROBE
  815. #if ENABLED(TOUCH_MI_PROBE)
  816. #undef PROBE_MANUALLY
  817. #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
  818. //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
  819. //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu)
  820. #endif
  821. // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
  822. //#define SOLENOID_PROBE
  823. // A sled-mounted probe like those designed by Charles Bell.
  824. //#define Z_PROBE_SLED
  825. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  826. // A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
  827. //#define RACK_AND_PINION_PROBE
  828. #if ENABLED(RACK_AND_PINION_PROBE)
  829. #define Z_PROBE_DEPLOY_X X_MIN_POS
  830. #define Z_PROBE_RETRACT_X X_MAX_POS
  831. #endif
  832. //
  833. // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
  834. //
  835. /**
  836. * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
  837. *
  838. * In the following example the X and Y offsets are both positive:
  839. *
  840. * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
  841. *
  842. * +-- BACK ---+
  843. * | |
  844. * L | (+) P | R <-- probe (20,20)
  845. * E | | I
  846. * F | (-) N (+) | G <-- nozzle (10,10)
  847. * T | | H
  848. * | (-) | T
  849. * | |
  850. * O-- FRONT --+
  851. * (0,0)
  852. *
  853. * Specify a Probe position as { X, Y, Z }
  854. */
  855. #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
  856. // Certain types of probes need to stay away from edges
  857. #define MIN_PROBE_EDGE 10
  858. // X and Y axis travel speed (mm/m) between probes
  859. #define XY_PROBE_SPEED 8000
  860. // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
  861. #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
  862. // Feedrate (mm/m) for the "accurate" probe of each point
  863. #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
  864. /**
  865. * Multiple Probing
  866. *
  867. * You may get improved results by probing 2 or more times.
  868. * With EXTRA_PROBING the more atypical reading(s) will be disregarded.
  869. *
  870. * A total of 2 does fast/slow probes with a weighted average.
  871. * A total of 3 or more adds more slow probes, taking the average.
  872. */
  873. //#define MULTIPLE_PROBING 2
  874. //#define EXTRA_PROBING 1
  875. /**
  876. * Z probes require clearance when deploying, stowing, and moving between
  877. * probe points to avoid hitting the bed and other hardware.
  878. * Servo-mounted probes require extra space for the arm to rotate.
  879. * Inductive probes need space to keep from triggering early.
  880. *
  881. * Use these settings to specify the distance (mm) to raise the probe (or
  882. * lower the bed). The values set here apply over and above any (negative)
  883. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  884. * Only integer values >= 1 are valid here.
  885. *
  886. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
  887. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
  888. */
  889. #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
  890. #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
  891. #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
  892. //#define Z_AFTER_PROBING 5 // Z position after probing is done
  893. #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
  894. // For M851 give a range for adjusting the Z probe offset
  895. #define Z_PROBE_OFFSET_RANGE_MIN -20
  896. #define Z_PROBE_OFFSET_RANGE_MAX 20
  897. // Enable the M48 repeatability test to test probe accuracy
  898. //#define Z_MIN_PROBE_REPEATABILITY_TEST
  899. // Before deploy/stow pause for user confirmation
  900. //#define PAUSE_BEFORE_DEPLOY_STOW
  901. #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
  902. //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
  903. #endif
  904. /**
  905. * Enable one or more of the following if probing seems unreliable.
  906. * Heaters and/or fans can be disabled during probing to minimize electrical
  907. * noise. A delay can also be added to allow noise and vibration to settle.
  908. * These options are most useful for the BLTouch probe, but may also improve
  909. * readings with inductive probes and piezo sensors.
  910. */
  911. //#define PROBING_HEATERS_OFF // Turn heaters off when probing
  912. #if ENABLED(PROBING_HEATERS_OFF)
  913. //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
  914. #endif
  915. //#define PROBING_FANS_OFF // Turn fans off when probing
  916. //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
  917. //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
  918. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  919. // :{ 0:'Low', 1:'High' }
  920. #define X_ENABLE_ON 0
  921. #define Y_ENABLE_ON 0
  922. #define Z_ENABLE_ON 0
  923. #define E_ENABLE_ON 0 // For all extruders
  924. // Disables axis stepper immediately when it's not being used.
  925. // WARNING: When motors turn off there is a chance of losing position accuracy!
  926. #define DISABLE_X false
  927. #define DISABLE_Y false
  928. #define DISABLE_Z false
  929. // Warn on display about possibly reduced accuracy
  930. //#define DISABLE_REDUCED_ACCURACY_WARNING
  931. // @section extruder
  932. #define DISABLE_E false // For all extruders
  933. #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
  934. // @section machine
  935. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  936. #define INVERT_X_DIR true
  937. #define INVERT_Y_DIR false
  938. #define INVERT_Z_DIR true
  939. // @section extruder
  940. // For direct drive extruder v9 set to true, for geared extruder set to false.
  941. #define INVERT_E0_DIR false
  942. #define INVERT_E1_DIR false
  943. #define INVERT_E2_DIR false
  944. #define INVERT_E3_DIR false
  945. #define INVERT_E4_DIR false
  946. #define INVERT_E5_DIR false
  947. // @section homing
  948. //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
  949. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
  950. //#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
  951. // Be sure you have this distance over your Z_MAX_POS in case.
  952. // Direction of endstops when homing; 1=MAX, -1=MIN
  953. // :[-1,1]
  954. #define X_HOME_DIR -1
  955. #define Y_HOME_DIR -1
  956. #define Z_HOME_DIR -1
  957. // @section machine
  958. #if defined(U30) || defined(LK2) || defined(LK4)
  959. #define X_BED_SIZE 220
  960. #define Y_BED_SIZE 220
  961. #define Z_MACHINE_MAX 250
  962. #endif
  963. #if defined(U20) || defined(LK1)
  964. #define X_BED_SIZE 300
  965. #define Y_BED_SIZE 300
  966. #define Z_MACHINE_MAX 400
  967. #endif
  968. #ifdef U20_PLUS
  969. #define X_BED_SIZE 400
  970. #define Y_BED_SIZE 400
  971. #define Z_MACHINE_MAX 500
  972. #endif
  973. // Travel limits (mm) after homing, corresponding to endstop positions.
  974. #define X_MIN_POS 0
  975. #define Y_MIN_POS 0
  976. #define Z_MIN_POS 0
  977. #define X_MAX_POS X_BED_SIZE
  978. #define Y_MAX_POS Y_BED_SIZE
  979. #define Z_MAX_POS Z_MACHINE_MAX
  980. /**
  981. * Software Endstops
  982. *
  983. * - Prevent moves outside the set machine bounds.
  984. * - Individual axes can be disabled, if desired.
  985. * - X and Y only apply to Cartesian robots.
  986. * - Use 'M211' to set software endstops on/off or report current state
  987. */
  988. // Min software endstops constrain movement within minimum coordinate bounds
  989. #define MIN_SOFTWARE_ENDSTOPS
  990. #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  991. #define MIN_SOFTWARE_ENDSTOP_X
  992. #define MIN_SOFTWARE_ENDSTOP_Y
  993. #define MIN_SOFTWARE_ENDSTOP_Z
  994. #endif
  995. // Max software endstops constrain movement within maximum coordinate bounds
  996. #define MAX_SOFTWARE_ENDSTOPS
  997. #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
  998. #define MAX_SOFTWARE_ENDSTOP_X
  999. #define MAX_SOFTWARE_ENDSTOP_Y
  1000. #define MAX_SOFTWARE_ENDSTOP_Z
  1001. #endif
  1002. #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  1003. //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
  1004. #endif
  1005. /**
  1006. * Filament Runout Sensors
  1007. * Mechanical or opto endstops are used to check for the presence of filament.
  1008. *
  1009. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  1010. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  1011. * By default the firmware assumes HIGH=FILAMENT PRESENT.
  1012. */
  1013. #define FILAMENT_RUNOUT_SENSOR
  1014. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  1015. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
  1016. #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor.
  1017. //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
  1018. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
  1019. // Set one or more commands to execute on filament runout.
  1020. // (After 'M412 H' Marlin will ask the host to handle the process.)
  1021. #define FILAMENT_RUNOUT_SCRIPT "M600"
  1022. // After a runout is detected, continue printing this length of filament
  1023. // before executing the runout script. Useful for a sensor at the end of
  1024. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
  1025. //#define FILAMENT_RUNOUT_DISTANCE_MM 25
  1026. #ifdef FILAMENT_RUNOUT_DISTANCE_MM
  1027. // Enable this option to use an encoder disc that toggles the runout pin
  1028. // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
  1029. // large enough to avoid false positives.)
  1030. //#define FILAMENT_MOTION_SENSOR
  1031. #endif
  1032. #endif
  1033. //===========================================================================
  1034. //=============================== Bed Leveling ==============================
  1035. //===========================================================================
  1036. // @section calibrate
  1037. /**
  1038. * Choose one of the options below to enable G29 Bed Leveling. The parameters
  1039. * and behavior of G29 will change depending on your selection.
  1040. *
  1041. * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
  1042. *
  1043. * - AUTO_BED_LEVELING_3POINT
  1044. * Probe 3 arbitrary points on the bed (that aren't collinear)
  1045. * You specify the XY coordinates of all 3 points.
  1046. * The result is a single tilted plane. Best for a flat bed.
  1047. *
  1048. * - AUTO_BED_LEVELING_LINEAR
  1049. * Probe several points in a grid.
  1050. * You specify the rectangle and the density of sample points.
  1051. * The result is a single tilted plane. Best for a flat bed.
  1052. *
  1053. * - AUTO_BED_LEVELING_BILINEAR
  1054. * Probe several points in a grid.
  1055. * You specify the rectangle and the density of sample points.
  1056. * The result is a mesh, best for large or uneven beds.
  1057. *
  1058. * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  1059. * A comprehensive bed leveling system combining the features and benefits
  1060. * of other systems. UBL also includes integrated Mesh Generation, Mesh
  1061. * Validation and Mesh Editing systems.
  1062. *
  1063. * - MESH_BED_LEVELING
  1064. * Probe a grid manually
  1065. * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
  1066. * For machines without a probe, Mesh Bed Leveling provides a method to perform
  1067. * leveling in steps so you can manually adjust the Z height at each grid-point.
  1068. * With an LCD controller the process is guided step-by-step.
  1069. */
  1070. //#define AUTO_BED_LEVELING_3POINT
  1071. //#define AUTO_BED_LEVELING_LINEAR
  1072. //#define AUTO_BED_LEVELING_BILINEAR
  1073. //#define AUTO_BED_LEVELING_UBL
  1074. #define MESH_BED_LEVELING
  1075. /**
  1076. * Normally G28 leaves leveling disabled on completion. Enable
  1077. * this option to have G28 restore the prior leveling state.
  1078. */
  1079. //#define RESTORE_LEVELING_AFTER_G28
  1080. /**
  1081. * Enable detailed logging of G28, G29, M48, etc.
  1082. * Turn on with the command 'M111 S32'.
  1083. * NOTE: Requires a lot of PROGMEM!
  1084. */
  1085. //#define DEBUG_LEVELING_FEATURE
  1086. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  1087. // Gradually reduce leveling correction until a set height is reached,
  1088. // at which point movement will be level to the machine's XY plane.
  1089. // The height can be set with M420 Z<height>
  1090. #define ENABLE_LEVELING_FADE_HEIGHT
  1091. // For Cartesian machines, instead of dividing moves on mesh boundaries,
  1092. // split up moves into short segments like a Delta. This follows the
  1093. // contours of the bed more closely than edge-to-edge straight moves.
  1094. #define SEGMENT_LEVELED_MOVES
  1095. #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
  1096. /**
  1097. * Enable the G26 Mesh Validation Pattern tool.
  1098. */
  1099. //#define G26_MESH_VALIDATION
  1100. #if ENABLED(G26_MESH_VALIDATION)
  1101. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
  1102. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
  1103. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
  1104. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
  1105. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
  1106. #endif
  1107. #endif
  1108. #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  1109. // Set the number of grid points per dimension.
  1110. #define GRID_MAX_POINTS_X 3
  1111. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1112. // Probe along the Y axis, advancing X after each column
  1113. //#define PROBE_Y_FIRST
  1114. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  1115. // Beyond the probed grid, continue the implied tilt?
  1116. // Default is to maintain the height of the nearest edge.
  1117. //#define EXTRAPOLATE_BEYOND_GRID
  1118. //
  1119. // Experimental Subdivision of the grid by Catmull-Rom method.
  1120. // Synthesizes intermediate points to produce a more detailed mesh.
  1121. //
  1122. //#define ABL_BILINEAR_SUBDIVISION
  1123. #if ENABLED(ABL_BILINEAR_SUBDIVISION)
  1124. // Number of subdivisions between probe points
  1125. #define BILINEAR_SUBDIVISIONS 3
  1126. #endif
  1127. #endif
  1128. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  1129. //===========================================================================
  1130. //========================= Unified Bed Leveling ============================
  1131. //===========================================================================
  1132. //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
  1133. #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
  1134. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
  1135. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1136. #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
  1137. #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
  1138. //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
  1139. // as the Z-Height correction value.
  1140. #elif ENABLED(MESH_BED_LEVELING)
  1141. //===========================================================================
  1142. //=================================== Mesh ==================================
  1143. //===========================================================================
  1144. #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
  1145. #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
  1146. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1147. //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
  1148. #endif // BED_LEVELING
  1149. /**
  1150. * Add a bed leveling sub-menu for ABL or MBL.
  1151. * Include a guided procedure if manual probing is enabled.
  1152. */
  1153. //#define LCD_BED_LEVELING
  1154. #if ENABLED(LCD_BED_LEVELING)
  1155. #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
  1156. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
  1157. //#define MESH_EDIT_MENU // Add a menu to edit mesh points
  1158. #endif
  1159. // Add a menu item to move between bed corners for manual bed adjustment
  1160. #define LEVEL_BED_CORNERS
  1161. #if ENABLED(LEVEL_BED_CORNERS)
  1162. #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
  1163. #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
  1164. #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points
  1165. #define LEVEL_CENTER_TOO // Move to the center after the last corner
  1166. #endif
  1167. /**
  1168. * Commands to execute at the end of G29 probing.
  1169. * Useful to retract or move the Z probe out of the way.
  1170. */
  1171. //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
  1172. // @section homing
  1173. // The center of the bed is at (X=0, Y=0)
  1174. //#define BED_CENTER_AT_0_0
  1175. // Manually set the home position. Leave these undefined for automatic settings.
  1176. // For DELTA this is the top-center of the Cartesian print volume.
  1177. //#define MANUAL_X_HOME_POS 0
  1178. //#define MANUAL_Y_HOME_POS 0
  1179. //#define MANUAL_Z_HOME_POS 0
  1180. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
  1181. //
  1182. // With this feature enabled:
  1183. //
  1184. // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
  1185. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
  1186. // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
  1187. // - Prevent Z homing when the Z probe is outside bed area.
  1188. //
  1189. //#define Z_SAFE_HOMING
  1190. #if ENABLED(Z_SAFE_HOMING)
  1191. #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
  1192. #define Z_SAFE_HOMING_Y_POINT 4 // Y point for Z homing when homing all axes (G28).
  1193. #endif
  1194. // Homing speeds (mm/m)
  1195. #define HOMING_FEEDRATE_XY (40*60)
  1196. #define HOMING_FEEDRATE_Z (7*60)
  1197. // Validate that endstops are triggered on homing moves
  1198. #define VALIDATE_HOMING_ENDSTOPS
  1199. // @section calibrate
  1200. /**
  1201. * Bed Skew Compensation
  1202. *
  1203. * This feature corrects for misalignment in the XYZ axes.
  1204. *
  1205. * Take the following steps to get the bed skew in the XY plane:
  1206. * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
  1207. * 2. For XY_DIAG_AC measure the diagonal A to C
  1208. * 3. For XY_DIAG_BD measure the diagonal B to D
  1209. * 4. For XY_SIDE_AD measure the edge A to D
  1210. *
  1211. * Marlin automatically computes skew factors from these measurements.
  1212. * Skew factors may also be computed and set manually:
  1213. *
  1214. * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
  1215. * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
  1216. *
  1217. * If desired, follow the same procedure for XZ and YZ.
  1218. * Use these diagrams for reference:
  1219. *
  1220. * Y Z Z
  1221. * ^ B-------C ^ B-------C ^ B-------C
  1222. * | / / | / / | / /
  1223. * | / / | / / | / /
  1224. * | A-------D | A-------D | A-------D
  1225. * +-------------->X +-------------->X +-------------->Y
  1226. * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
  1227. */
  1228. //#define SKEW_CORRECTION
  1229. #if ENABLED(SKEW_CORRECTION)
  1230. // Input all length measurements here:
  1231. #define XY_DIAG_AC 282.8427124746
  1232. #define XY_DIAG_BD 282.8427124746
  1233. #define XY_SIDE_AD 200
  1234. // Or, set the default skew factors directly here
  1235. // to override the above measurements:
  1236. #define XY_SKEW_FACTOR 0.0
  1237. //#define SKEW_CORRECTION_FOR_Z
  1238. #if ENABLED(SKEW_CORRECTION_FOR_Z)
  1239. #define XZ_DIAG_AC 282.8427124746
  1240. #define XZ_DIAG_BD 282.8427124746
  1241. #define YZ_DIAG_AC 282.8427124746
  1242. #define YZ_DIAG_BD 282.8427124746
  1243. #define YZ_SIDE_AD 200
  1244. #define XZ_SKEW_FACTOR 0.0
  1245. #define YZ_SKEW_FACTOR 0.0
  1246. #endif
  1247. // Enable this option for M852 to set skew at runtime
  1248. //#define SKEW_CORRECTION_GCODE
  1249. #endif
  1250. //=============================================================================
  1251. //============================= Additional Features ===========================
  1252. //=============================================================================
  1253. // @section extras
  1254. /**
  1255. * EEPROM
  1256. *
  1257. * Persistent storage to preserve configurable settings across reboots.
  1258. *
  1259. * M500 - Store settings to EEPROM.
  1260. * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  1261. * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  1262. */
  1263. #define EEPROM_SETTINGS // Persistent storage with M500 and M501
  1264. //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
  1265. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
  1266. #if ENABLED(EEPROM_SETTINGS)
  1267. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
  1268. #endif
  1269. //
  1270. // Host Keepalive
  1271. //
  1272. // When enabled Marlin will send a busy status message to the host
  1273. // every couple of seconds when it can't accept commands.
  1274. //
  1275. #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
  1276. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
  1277. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
  1278. //
  1279. // M100 Free Memory Watcher
  1280. //
  1281. //#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
  1282. //
  1283. // G20/G21 Inch mode support
  1284. //
  1285. //#define INCH_MODE_SUPPORT
  1286. //
  1287. // M149 Set temperature units support
  1288. //
  1289. //#define TEMPERATURE_UNITS_SUPPORT
  1290. // @section temperature
  1291. // Preheat Constants
  1292. #define PREHEAT_1_LABEL "PLA"
  1293. #define PREHEAT_1_TEMP_HOTEND 200
  1294. #define PREHEAT_1_TEMP_BED 60
  1295. #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
  1296. #define PREHEAT_2_LABEL "ABS"
  1297. #define PREHEAT_2_TEMP_HOTEND 250
  1298. #define PREHEAT_2_TEMP_BED 100
  1299. #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
  1300. /**
  1301. * Nozzle Park
  1302. *
  1303. * Park the nozzle at the given XYZ position on idle or G27.
  1304. *
  1305. * The "P" parameter controls the action applied to the Z axis:
  1306. *
  1307. * P0 (Default) If Z is below park Z raise the nozzle.
  1308. * P1 Raise the nozzle always to Z-park height.
  1309. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  1310. */
  1311. #define NOZZLE_PARK_FEATURE
  1312. #if ENABLED(NOZZLE_PARK_FEATURE)
  1313. // Specify a park position as { X, Y, Z_raise }
  1314. #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
  1315. #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
  1316. #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
  1317. #endif
  1318. /**
  1319. * Clean Nozzle Feature -- EXPERIMENTAL
  1320. *
  1321. * Adds the G12 command to perform a nozzle cleaning process.
  1322. *
  1323. * Parameters:
  1324. * P Pattern
  1325. * S Strokes / Repetitions
  1326. * T Triangles (P1 only)
  1327. *
  1328. * Patterns:
  1329. * P0 Straight line (default). This process requires a sponge type material
  1330. * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
  1331. * between the start / end points.
  1332. *
  1333. * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
  1334. * number of zig-zag triangles to do. "S" defines the number of strokes.
  1335. * Zig-zags are done in whichever is the narrower dimension.
  1336. * For example, "G12 P1 S1 T3" will execute:
  1337. *
  1338. * --
  1339. * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
  1340. * | | / \ / \ / \ |
  1341. * A | | / \ / \ / \ |
  1342. * | | / \ / \ / \ |
  1343. * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
  1344. * -- +--------------------------------+
  1345. * |________|_________|_________|
  1346. * T1 T2 T3
  1347. *
  1348. * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
  1349. * "R" specifies the radius. "S" specifies the stroke count.
  1350. * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
  1351. *
  1352. * Caveats: The ending Z should be the same as starting Z.
  1353. * Attention: EXPERIMENTAL. G-code arguments may change.
  1354. *
  1355. */
  1356. //#define NOZZLE_CLEAN_FEATURE
  1357. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  1358. // Default number of pattern repetitions
  1359. #define NOZZLE_CLEAN_STROKES 12
  1360. // Default number of triangles
  1361. #define NOZZLE_CLEAN_TRIANGLES 3
  1362. // Specify positions as { X, Y, Z }
  1363. #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) }
  1364. #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
  1365. // Circular pattern radius
  1366. #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
  1367. // Circular pattern circle fragments number
  1368. #define NOZZLE_CLEAN_CIRCLE_FN 10
  1369. // Middle point of circle
  1370. #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
  1371. // Move the nozzle to the initial position after cleaning
  1372. #define NOZZLE_CLEAN_GOBACK
  1373. // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
  1374. //#define NOZZLE_CLEAN_NO_Z
  1375. #endif
  1376. /**
  1377. * Print Job Timer
  1378. *
  1379. * Automatically start and stop the print job timer on M104/M109/M190.
  1380. *
  1381. * M104 (hotend, no wait) - high temp = none, low temp = stop timer
  1382. * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
  1383. * M190 (bed, wait) - high temp = start timer, low temp = none
  1384. *
  1385. * The timer can also be controlled with the following commands:
  1386. *
  1387. * M75 - Start the print job timer
  1388. * M76 - Pause the print job timer
  1389. * M77 - Stop the print job timer
  1390. */
  1391. #define PRINTJOB_TIMER_AUTOSTART
  1392. /**
  1393. * Print Counter
  1394. *
  1395. * Track statistical data such as:
  1396. *
  1397. * - Total print jobs
  1398. * - Total successful print jobs
  1399. * - Total failed print jobs
  1400. * - Total time printing
  1401. *
  1402. * View the current statistics with M78.
  1403. */
  1404. //#define PRINTCOUNTER
  1405. //=============================================================================
  1406. //============================= LCD and SD support ============================
  1407. //=============================================================================
  1408. // @section lcd
  1409. /**
  1410. * LCD LANGUAGE
  1411. *
  1412. * Select the language to display on the LCD. These languages are available:
  1413. *
  1414. * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana,
  1415. * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test
  1416. *
  1417. * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  1418. */
  1419. #define LCD_LANGUAGE en
  1420. /**
  1421. * LCD Character Set
  1422. *
  1423. * Note: This option is NOT applicable to Graphical Displays.
  1424. *
  1425. * All character-based LCDs provide ASCII plus one of these
  1426. * language extensions:
  1427. *
  1428. * - JAPANESE ... the most common
  1429. * - WESTERN ... with more accented characters
  1430. * - CYRILLIC ... for the Russian language
  1431. *
  1432. * To determine the language extension installed on your controller:
  1433. *
  1434. * - Compile and upload with LCD_LANGUAGE set to 'test'
  1435. * - Click the controller to view the LCD menu
  1436. * - The LCD will display Japanese, Western, or Cyrillic text
  1437. *
  1438. * See http://marlinfw.org/docs/development/lcd_language.html
  1439. *
  1440. * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  1441. */
  1442. #define DISPLAY_CHARSET_HD44780 JAPANESE
  1443. /**
  1444. * Info Screen Style (0:Classic, 1:Prusa)
  1445. *
  1446. * :[0:'Classic', 1:'Prusa']
  1447. */
  1448. #define LCD_INFO_SCREEN_STYLE 0
  1449. /**
  1450. * SD CARD
  1451. *
  1452. * SD Card support is disabled by default. If your controller has an SD slot,
  1453. * you must uncomment the following option or it won't work.
  1454. *
  1455. */
  1456. #define SDSUPPORT
  1457. #define SDIO_SUPPORT // Note from Hobi : Added as was not present in the file...
  1458. /**
  1459. * SD CARD: SPI SPEED
  1460. *
  1461. * Enable one of the following items for a slower SPI transfer speed.
  1462. * This may be required to resolve "volume init" errors.
  1463. */
  1464. //#define SPI_SPEED SPI_HALF_SPEED
  1465. //#define SPI_SPEED SPI_QUARTER_SPEED
  1466. //#define SPI_SPEED SPI_EIGHTH_SPEED
  1467. /**
  1468. * SD CARD: ENABLE CRC
  1469. *
  1470. * Use CRC checks and retries on the SD communication.
  1471. */
  1472. //#define SD_CHECK_AND_RETRY
  1473. /**
  1474. * LCD Menu Items
  1475. *
  1476. * Disable all menus and only display the Status Screen, or
  1477. * just remove some extraneous menu items to recover space.
  1478. */
  1479. //#define NO_LCD_MENUS
  1480. //#define SLIM_LCD_MENUS
  1481. //
  1482. // ENCODER SETTINGS
  1483. //
  1484. // This option overrides the default number of encoder pulses needed to
  1485. // produce one step. Should be increased for high-resolution encoders.
  1486. //
  1487. //#define ENCODER_PULSES_PER_STEP 4
  1488. //
  1489. // Use this option to override the number of step signals required to
  1490. // move between next/prev menu items.
  1491. //
  1492. //#define ENCODER_STEPS_PER_MENU_ITEM 1
  1493. /**
  1494. * Encoder Direction Options
  1495. *
  1496. * Test your encoder's behavior first with both options disabled.
  1497. *
  1498. * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
  1499. * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
  1500. * Reversed Value Editing only? Enable BOTH options.
  1501. */
  1502. //
  1503. // This option reverses the encoder direction everywhere.
  1504. //
  1505. // Set this option if CLOCKWISE causes values to DECREASE
  1506. //
  1507. //#define REVERSE_ENCODER_DIRECTION
  1508. //
  1509. // This option reverses the encoder direction for navigating LCD menus.
  1510. //
  1511. // If CLOCKWISE normally moves DOWN this makes it go UP.
  1512. // If CLOCKWISE normally moves UP this makes it go DOWN.
  1513. //
  1514. //#define REVERSE_MENU_DIRECTION
  1515. //
  1516. // This option reverses the encoder direction for Select Screen.
  1517. //
  1518. // If CLOCKWISE normally moves LEFT this makes it go RIGHT.
  1519. // If CLOCKWISE normally moves RIGHT this makes it go LEFT.
  1520. //
  1521. //#define REVERSE_SELECT_DIRECTION
  1522. //
  1523. // Individual Axis Homing
  1524. //
  1525. // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
  1526. //
  1527. #define INDIVIDUAL_AXIS_HOMING_MENU
  1528. //
  1529. // SPEAKER/BUZZER
  1530. //
  1531. // If you have a speaker that can produce tones, enable it here.
  1532. // By default Marlin assumes you have a buzzer with a fixed frequency.
  1533. //
  1534. //#define SPEAKER
  1535. //
  1536. // The duration and frequency for the UI feedback sound.
  1537. // Set these to 0 to disable audio feedback in the LCD menus.
  1538. //
  1539. // Note: Test audio output with the G-Code:
  1540. // M300 S<frequency Hz> P<duration ms>
  1541. //
  1542. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 250
  1543. //#define LCD_FEEDBACK_FREQUENCY_HZ 1000
  1544. //=============================================================================
  1545. //======================== LCD / Controller Selection =========================
  1546. //======================== (Character-based LCDs) =========================
  1547. //=============================================================================
  1548. //
  1549. // RepRapDiscount Smart Controller.
  1550. // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
  1551. //
  1552. // Note: Usually sold with a white PCB.
  1553. //
  1554. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  1555. //
  1556. // Original RADDS LCD Display+Encoder+SDCardReader
  1557. // http://doku.radds.org/dokumentation/lcd-display/
  1558. //
  1559. //#define RADDS_DISPLAY
  1560. //
  1561. // ULTIMAKER Controller.
  1562. //
  1563. //#define ULTIMAKERCONTROLLER
  1564. //
  1565. // ULTIPANEL as seen on Thingiverse.
  1566. //
  1567. //#define ULTIPANEL
  1568. //
  1569. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  1570. // http://reprap.org/wiki/PanelOne
  1571. //
  1572. //#define PANEL_ONE
  1573. //
  1574. // GADGETS3D G3D LCD/SD Controller
  1575. // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  1576. //
  1577. // Note: Usually sold with a blue PCB.
  1578. //
  1579. //#define G3D_PANEL
  1580. //
  1581. // RigidBot Panel V1.0
  1582. // http://www.inventapart.com/
  1583. //
  1584. //#define RIGIDBOT_PANEL
  1585. //
  1586. // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
  1587. // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
  1588. //
  1589. //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
  1590. //
  1591. // ANET and Tronxy 20x4 Controller
  1592. //
  1593. //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
  1594. // This LCD is known to be susceptible to electrical interference
  1595. // which scrambles the display. Pressing any button clears it up.
  1596. // This is a LCD2004 display with 5 analog buttons.
  1597. //
  1598. // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
  1599. //
  1600. //#define ULTRA_LCD
  1601. //=============================================================================
  1602. //======================== LCD / Controller Selection =========================
  1603. //===================== (I2C and Shift-Register LCDs) =====================
  1604. //=============================================================================
  1605. //
  1606. // CONTROLLER TYPE: I2C
  1607. //
  1608. // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
  1609. // library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  1610. //
  1611. //
  1612. // Elefu RA Board Control Panel
  1613. // http://www.elefu.com/index.php?route=product/product&product_id=53
  1614. //
  1615. //#define RA_CONTROL_PANEL
  1616. //
  1617. // Sainsmart (YwRobot) LCD Displays
  1618. //
  1619. // These require F.Malpartida's LiquidCrystal_I2C library
  1620. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
  1621. //
  1622. //#define LCD_SAINSMART_I2C_1602
  1623. //#define LCD_SAINSMART_I2C_2004
  1624. //
  1625. // Generic LCM1602 LCD adapter
  1626. //
  1627. //#define LCM1602
  1628. //
  1629. // PANELOLU2 LCD with status LEDs,
  1630. // separate encoder and click inputs.
  1631. //
  1632. // Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
  1633. // For more info: https://github.com/lincomatic/LiquidTWI2
  1634. //
  1635. // Note: The PANELOLU2 encoder click input can either be directly connected to
  1636. // a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  1637. //
  1638. //#define LCD_I2C_PANELOLU2
  1639. //
  1640. // Panucatt VIKI LCD with status LEDs,
  1641. // integrated click & L/R/U/D buttons, separate encoder inputs.
  1642. //
  1643. //#define LCD_I2C_VIKI
  1644. //
  1645. // CONTROLLER TYPE: Shift register panels
  1646. //
  1647. //
  1648. // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
  1649. // LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
  1650. //
  1651. //#define SAV_3DLCD
  1652. //
  1653. // 3-wire SR LCD with strobe using 74HC4094
  1654. // https://github.com/mikeshub/SailfishLCD
  1655. // Uses the code directly from Sailfish
  1656. //
  1657. //#define FF_INTERFACEBOARD
  1658. //=============================================================================
  1659. //======================= LCD / Controller Selection =======================
  1660. //========================= (Graphical LCDs) ========================
  1661. //=============================================================================
  1662. //
  1663. // CONTROLLER TYPE: Graphical 128x64 (DOGM)
  1664. //
  1665. // IMPORTANT: The U8glib library is required for Graphical Display!
  1666. // https://github.com/olikraus/U8glib_Arduino
  1667. //
  1668. //
  1669. // RepRapDiscount FULL GRAPHIC Smart Controller
  1670. // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  1671. //
  1672. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  1673. //
  1674. // ReprapWorld Graphical LCD
  1675. // https://reprapworld.com/?products_details&products_id/1218
  1676. //
  1677. //#define REPRAPWORLD_GRAPHICAL_LCD
  1678. //
  1679. // Activate one of these if you have a Panucatt Devices
  1680. // Viki 2.0 or mini Viki with Graphic LCD
  1681. // http://panucatt.com
  1682. //
  1683. //#define VIKI2
  1684. //#define miniVIKI
  1685. //
  1686. // MakerLab Mini Panel with graphic
  1687. // controller and SD support - http://reprap.org/wiki/Mini_panel
  1688. //
  1689. //#define MINIPANEL
  1690. //
  1691. // MaKr3d Makr-Panel with graphic controller and SD support.
  1692. // http://reprap.org/wiki/MaKr3d_MaKrPanel
  1693. //
  1694. //#define MAKRPANEL
  1695. //
  1696. // Adafruit ST7565 Full Graphic Controller.
  1697. // https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  1698. //
  1699. //#define ELB_FULL_GRAPHIC_CONTROLLER
  1700. //
  1701. // BQ LCD Smart Controller shipped by
  1702. // default with the BQ Hephestos 2 and Witbox 2.
  1703. //
  1704. //#define BQ_LCD_SMART_CONTROLLER
  1705. //
  1706. // Cartesio UI
  1707. // http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
  1708. //
  1709. //#define CARTESIO_UI
  1710. //
  1711. // LCD for Melzi Card with Graphical LCD
  1712. //
  1713. //#define LCD_FOR_MELZI
  1714. //
  1715. // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
  1716. // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
  1717. //
  1718. //#define ULTI_CONTROLLER
  1719. //
  1720. // MKS MINI12864 with graphic controller and SD support
  1721. // https://reprap.org/wiki/MKS_MINI_12864
  1722. //
  1723. //#define MKS_MINI_12864
  1724. //
  1725. // FYSETC variant of the MINI12864 graphic controller with SD support
  1726. // https://wiki.fysetc.com/Mini12864_Panel/
  1727. //
  1728. //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
  1729. //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
  1730. //#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
  1731. //#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight
  1732. //
  1733. // Factory display for Creality CR-10
  1734. // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
  1735. //
  1736. // This is RAMPS-compatible using a single 10-pin connector.
  1737. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
  1738. //
  1739. //#define CR10_STOCKDISPLAY
  1740. //
  1741. // ANET and Tronxy Graphical Controller
  1742. //
  1743. // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
  1744. // A clone of the RepRapDiscount full graphics display but with
  1745. // different pins/wiring (see pins_ANET_10.h).
  1746. //
  1747. //#define ANET_FULL_GRAPHICS_LCD
  1748. //
  1749. // AZSMZ 12864 LCD with SD
  1750. // https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
  1751. //
  1752. //#define AZSMZ_12864
  1753. //
  1754. // Silvergate GLCD controller
  1755. // http://github.com/android444/Silvergate
  1756. //
  1757. //#define SILVER_GATE_GLCD_CONTROLLER
  1758. //=============================================================================
  1759. //============================== OLED Displays ==============================
  1760. //=============================================================================
  1761. //
  1762. // SSD1306 OLED full graphics generic display
  1763. //
  1764. //#define U8GLIB_SSD1306
  1765. //
  1766. // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
  1767. //
  1768. //#define SAV_3DGLCD
  1769. #if ENABLED(SAV_3DGLCD)
  1770. #define U8GLIB_SSD1306
  1771. //#define U8GLIB_SH1106
  1772. #endif
  1773. //
  1774. // TinyBoy2 128x64 OLED / Encoder Panel
  1775. //
  1776. //#define OLED_PANEL_TINYBOY2
  1777. //
  1778. // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
  1779. // http://reprap.org/wiki/MKS_12864OLED
  1780. //
  1781. // Tiny, but very sharp OLED display
  1782. //
  1783. //#define MKS_12864OLED // Uses the SH1106 controller (default)
  1784. //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
  1785. //
  1786. // Einstart S OLED SSD1306
  1787. //
  1788. //#define U8GLIB_SH1106_EINSTART
  1789. //
  1790. // Overlord OLED display/controller with i2c buzzer and LEDs
  1791. //
  1792. //#define OVERLORD_OLED
  1793. //=============================================================================
  1794. //========================== Extensible UI Displays ===========================
  1795. //=============================================================================
  1796. //
  1797. // DGUS Touch Display with DWIN OS
  1798. //
  1799. //#define DGUS_LCD
  1800. //
  1801. // Touch-screen LCD for Malyan M200 printers
  1802. //
  1803. //#define MALYAN_LCD
  1804. //
  1805. // LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
  1806. // See Configuration_adv.h for all configuration options.
  1807. //
  1808. //#define LULZBOT_TOUCH_UI
  1809. //
  1810. // Third-party or vendor-customized controller interfaces.
  1811. // Sources should be installed in 'src/lcd/extensible_ui'.
  1812. //
  1813. //#define EXTENSIBLE_UI
  1814. //=============================================================================
  1815. //=============================== Graphical TFTs ==============================
  1816. //=============================================================================
  1817. //
  1818. // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.)
  1819. //
  1820. #define FSMC_GRAPHICAL_TFT
  1821. //=============================================================================
  1822. //============================ Other Controllers ============================
  1823. //=============================================================================
  1824. //
  1825. // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
  1826. //
  1827. #define TOUCH_BUTTONS
  1828. #if ENABLED(TOUCH_BUTTONS)
  1829. #define TOUCH_CALIBRATION // Include user calibration widget in menus (Alfawise)
  1830. #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
  1831. #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus
  1832. #if ENABLED(TS_V11)
  1833. // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen
  1834. #define XPT2046_X_CALIBRATION 12000
  1835. #define XPT2046_Y_CALIBRATION 9000
  1836. #define XPT2046_X_OFFSET -24
  1837. #define XPT2046_Y_OFFSET -17
  1838. #endif
  1839. #if ENABLED(TS_V12)
  1840. // Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen
  1841. #define XPT2046_X_CALIBRATION 12000
  1842. #define XPT2046_Y_CALIBRATION -9000
  1843. #define XPT2046_X_OFFSET -43
  1844. #define XPT2046_Y_OFFSET 257
  1845. #endif
  1846. #if ENABLED(TS_V19)
  1847. // Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D
  1848. #define XPT2046_X_CALIBRATION -12000
  1849. #define XPT2046_Y_CALIBRATION 9000
  1850. #define XPT2046_X_OFFSET 320
  1851. #define XPT2046_Y_OFFSET 0
  1852. #endif
  1853. #endif
  1854. //
  1855. // RepRapWorld REPRAPWORLD_KEYPAD v1.1
  1856. // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
  1857. //
  1858. //#define REPRAPWORLD_KEYPAD
  1859. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
  1860. //=============================================================================
  1861. //=============================== Extra Features ==============================
  1862. //=============================================================================
  1863. // @section extras
  1864. // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
  1865. //#define FAST_PWM_FAN
  1866. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  1867. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  1868. // is too low, you should also increment SOFT_PWM_SCALE.
  1869. //#define FAN_SOFT_PWM
  1870. // Incrementing this by 1 will double the software PWM frequency,
  1871. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  1872. // However, control resolution will be halved for each increment;
  1873. // at zero value, there are 128 effective control positions.
  1874. // :[0,1,2,3,4,5,6,7]
  1875. #define SOFT_PWM_SCALE 0
  1876. // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
  1877. // be used to mitigate the associated resolution loss. If enabled,
  1878. // some of the PWM cycles are stretched so on average the desired
  1879. // duty cycle is attained.
  1880. //#define SOFT_PWM_DITHER
  1881. // Temperature status LEDs that display the hotend and bed temperature.
  1882. // If all hotends, bed temperature, and target temperature are under 54C
  1883. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
  1884. //#define TEMP_STAT_LEDS
  1885. // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
  1886. //#define SF_ARC_FIX
  1887. // Support for the BariCUDA Paste Extruder
  1888. //#define BARICUDA
  1889. // Support for BlinkM/CyzRgb
  1890. //#define BLINKM
  1891. // Support for PCA9632 PWM LED driver
  1892. //#define PCA9632
  1893. // Support for PCA9533 PWM LED driver
  1894. // https://github.com/mikeshub/SailfishRGB_LED
  1895. //#define PCA9533
  1896. /**
  1897. * RGB LED / LED Strip Control
  1898. *
  1899. * Enable support for an RGB LED connected to 5V digital pins, or
  1900. * an RGB Strip connected to MOSFETs controlled by digital pins.
  1901. *
  1902. * Adds the M150 command to set the LED (or LED strip) color.
  1903. * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  1904. * luminance values can be set from 0 to 255.
  1905. * For Neopixel LED an overall brightness parameter is also available.
  1906. *
  1907. * *** CAUTION ***
  1908. * LED Strips require a MOSFET Chip between PWM lines and LEDs,
  1909. * as the Arduino cannot handle the current the LEDs will require.
  1910. * Failure to follow this precaution can destroy your Arduino!
  1911. * NOTE: A separate 5V power supply is required! The Neopixel LED needs
  1912. * more current than the Arduino 5V linear regulator can produce.
  1913. * *** CAUTION ***
  1914. *
  1915. * LED Type. Enable only one of the following two options.
  1916. *
  1917. */
  1918. //#define RGB_LED
  1919. //#define RGBW_LED
  1920. #if EITHER(RGB_LED, RGBW_LED)
  1921. //#define RGB_LED_R_PIN 34
  1922. //#define RGB_LED_G_PIN 43
  1923. //#define RGB_LED_B_PIN 35
  1924. //#define RGB_LED_W_PIN -1
  1925. #endif
  1926. // Support for Adafruit Neopixel LED driver
  1927. //#define NEOPIXEL_LED
  1928. #if ENABLED(NEOPIXEL_LED)
  1929. #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
  1930. #define NEOPIXEL_PIN 4 // LED driving pin
  1931. //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
  1932. //#define NEOPIXEL2_PIN 5
  1933. #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
  1934. #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
  1935. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
  1936. //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
  1937. // Use a single Neopixel LED for static (background) lighting
  1938. //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use
  1939. //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
  1940. #endif
  1941. /**
  1942. * Printer Event LEDs
  1943. *
  1944. * During printing, the LEDs will reflect the printer status:
  1945. *
  1946. * - Gradually change from blue to violet as the heated bed gets to target temp
  1947. * - Gradually change from violet to red as the hotend gets to temperature
  1948. * - Change to white to illuminate work surface
  1949. * - Change to green once print has finished
  1950. * - Turn off after the print has finished and the user has pushed a button
  1951. */
  1952. #if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  1953. #define PRINTER_EVENT_LEDS
  1954. #endif
  1955. /**
  1956. * R/C SERVO support
  1957. * Sponsored by TrinityLabs, Reworked by codexmas
  1958. */
  1959. /**
  1960. * Number of servos
  1961. *
  1962. * For some servo-related options NUM_SERVOS will be set automatically.
  1963. * Set this manually if there are extra servos needing manual control.
  1964. * Leave undefined or set to 0 to entirely disable the servo subsystem.
  1965. */
  1966. //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
  1967. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
  1968. // 300ms is a good value but you can try less delay.
  1969. // If the servo can't reach the requested position, increase it.
  1970. #define SERVO_DELAY { 300 }
  1971. // Only power servos during movement, otherwise leave off to prevent jitter
  1972. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  1973. // Allow servo angle to be edited and saved to EEPROM
  1974. //#define EDITABLE_SERVO_ANGLES