My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Вы не можете выбрать более 25 тем Темы должны начинаться с буквы или цифры, могут содержать дефисы(-) и должны содержать не более 35 символов.

platformio.ini 45KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281
  1. #
  2. # Marlin Firmware
  3. # PlatformIO Configuration File
  4. #
  5. # For detailed documentation with EXAMPLES:
  6. #
  7. # https://docs.platformio.org/en/latest/projectconf/index.html
  8. #
  9. # Automatic targets - enable auto-uploading
  10. #targets = upload
  11. #
  12. # By default platformio build will abort after 5 errors.
  13. # Remove '-fmax-errors=5' from build_flags below to see all.
  14. #
  15. [platformio]
  16. src_dir = Marlin
  17. boards_dir = buildroot/share/PlatformIO/boards
  18. default_envs = mega2560
  19. include_dir = Marlin
  20. #
  21. # The 'common' values are used for most Marlin builds
  22. #
  23. [common]
  24. default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
  25. -<src/lcd/HD44780> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft>
  26. -<src/lcd/menu>
  27. -<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
  28. -<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
  29. -<src/lcd/menu/menu_backlash.cpp>
  30. -<src/lcd/menu/menu_bed_corners.cpp>
  31. -<src/lcd/menu/menu_bed_leveling.cpp>
  32. -<src/lcd/menu/menu_cancelobject.cpp>
  33. -<src/lcd/menu/menu_delta_calibrate.cpp>
  34. -<src/lcd/menu/menu_filament.cpp>
  35. -<src/lcd/menu/menu_info.cpp>
  36. -<src/lcd/menu/menu_job_recovery.cpp>
  37. -<src/lcd/menu/menu_led.cpp>
  38. -<src/lcd/menu/menu_media.cpp>
  39. -<src/lcd/menu/menu_mmu2.cpp>
  40. -<src/lcd/menu/menu_password.cpp>
  41. -<src/lcd/menu/menu_power_monitor.cpp>
  42. -<src/lcd/menu/menu_spindle_laser.cpp>
  43. -<src/lcd/menu/menu_temperature.cpp>
  44. -<src/lcd/menu/menu_tmc.cpp>
  45. -<src/lcd/menu/menu_touch_screen.cpp>
  46. -<src/lcd/menu/menu_ubl.cpp>
  47. -<src/lcd/extui/lib/mks_ui>
  48. -<src/lcd/extui/lib/dgus> -<src/lcd/extui_dgus_lcd.cpp>
  49. -<src/lcd/extui_example.cpp>
  50. -<src/lcd/extui_malyan_lcd.cpp>
  51. -<src/lcd/extui/lib/ftdi_eve_touch_ui>
  52. -<src/lcd/extui/lib/anycubic_i3mega>
  53. -<src/lcd/extui_anycubic_tft.cpp>
  54. -<src/lcd/lcdprint.cpp>
  55. -<src/sd/usb_flashdrive>
  56. -<src/feature/backlash.cpp>
  57. -<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda>
  58. -<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl>
  59. -<src/feature/bedlevel/mbl> -<src/gcode/bedlevel/mbl>
  60. -<src/feature/bedlevel/ubl> -<src/gcode/bedlevel/ubl>
  61. -<src/feature/binary_stream.cpp> -<src/libs/heatshrink>
  62. -<src/feature/bltouch.cpp>
  63. -<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel>
  64. -<src/feature/caselight> -<src/gcode/feature/caselight>
  65. -<src/feature/closedloop.cpp>
  66. -<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan>
  67. -<src/feature/dac> -<src/feature/digipot>
  68. -<src/feature/direct_stepping.cpp> -<src/gcode/motion/G6.cpp>
  69. -<src/feature/e_parser.cpp>
  70. -<src/feature/encoder_i2c.cpp>
  71. -<src/feature/fanmux.cpp>
  72. -<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth>
  73. -<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract>
  74. -<src/feature/host_actions.cpp>
  75. -<src/feature/hotend_idle.cpp>
  76. -<src/feature/joystick.cpp>
  77. -<src/feature/leds/blinkm.cpp>
  78. -<src/feature/leds/leds.cpp>
  79. -<src/feature/leds/pca9533.cpp>
  80. -<src/feature/leds/pca9632.cpp>
  81. -<src/feature/leds/printer_event_leds.cpp>
  82. -<src/feature/leds/tempstat.cpp>
  83. -<src/feature/max7219.cpp>
  84. -<src/feature/mixing.cpp>
  85. -<src/feature/mmu2> -<src/gcode/feature/prusa_MMU2>
  86. -<src/feature/password> -<src/gcode/feature/password>
  87. -<src/feature/pause.cpp>
  88. -<src/feature/power.cpp>
  89. -<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
  90. -<src/feature/powerloss.cpp> -<src/gcode/feature/powerloss>
  91. -<src/feature/probe_temp_comp.cpp>
  92. -<src/feature/runout.cpp> -<src/gcode/feature/runout>
  93. -<src/feature/snmm.cpp>
  94. -<src/feature/solenoid.cpp>
  95. -<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp>
  96. -<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp>
  97. -<src/feature/twibus.cpp>
  98. -<src/feature/z_stepper_align.cpp>
  99. -<src/gcode/bedlevel/G26.cpp>
  100. -<src/gcode/bedlevel/G35.cpp>
  101. -<src/gcode/bedlevel/G42.cpp>
  102. -<src/gcode/bedlevel/M420.cpp>
  103. -<src/gcode/calibrate/G33.cpp>
  104. -<src/gcode/calibrate/G34_M422.cpp>
  105. -<src/gcode/calibrate/G76_M871.cpp>
  106. -<src/gcode/calibrate/G425.cpp>
  107. -<src/gcode/calibrate/M12.cpp>
  108. -<src/gcode/calibrate/M48.cpp>
  109. -<src/gcode/calibrate/M100.cpp>
  110. -<src/gcode/calibrate/M425.cpp>
  111. -<src/gcode/calibrate/M666.cpp>
  112. -<src/gcode/calibrate/M852.cpp>
  113. -<src/gcode/config/M43.cpp>
  114. -<src/gcode/config/M217.cpp>
  115. -<src/gcode/config/M218.cpp>
  116. -<src/gcode/config/M221.cpp>
  117. -<src/gcode/config/M281.cpp>
  118. -<src/gcode/config/M302.cpp>
  119. -<src/gcode/config/M305.cpp>
  120. -<src/gcode/config/M540.cpp>
  121. -<src/gcode/control/M7-M9.cpp>
  122. -<src/gcode/control/M211.cpp>
  123. -<src/gcode/control/M605.cpp>
  124. -<src/gcode/feature/advance>
  125. -<src/gcode/feature/camera>
  126. -<src/gcode/feature/i2c>
  127. -<src/gcode/feature/L6470>
  128. -<src/gcode/feature/leds/M150.cpp>
  129. -<src/gcode/feature/leds/M7219.cpp>
  130. -<src/gcode/feature/macro>
  131. -<src/gcode/feature/mixing/M163-M165.cpp>
  132. -<src/gcode/feature/mixing/M166.cpp>
  133. -<src/gcode/feature/pause/G27.cpp>
  134. -<src/gcode/feature/pause/G60.cpp>
  135. -<src/gcode/feature/pause/G61.cpp>
  136. -<src/gcode/feature/pause/M125.cpp>
  137. -<src/gcode/feature/pause/M600.cpp>
  138. -<src/gcode/feature/pause/M603.cpp>
  139. -<src/gcode/feature/pause/M701_M702.cpp>
  140. -<src/gcode/feature/trinamic/M122.cpp>
  141. -<src/gcode/feature/trinamic/M569.cpp>
  142. -<src/gcode/feature/trinamic/M906.cpp>
  143. -<src/gcode/feature/trinamic/M911-M914.cpp>
  144. -<src/gcode/geometry/G17-G19.cpp>
  145. -<src/gcode/geometry/G53-G59.cpp>
  146. -<src/gcode/geometry/M206_M428.cpp>
  147. -<src/gcode/host/M16.cpp>
  148. -<src/gcode/host/M113.cpp>
  149. -<src/gcode/host/M360.cpp>
  150. -<src/gcode/host/M876.cpp>
  151. -<src/gcode/lcd/M0_M1.cpp>
  152. -<src/gcode/lcd/M145.cpp>
  153. -<src/gcode/lcd/M250.cpp>
  154. -<src/gcode/lcd/M73.cpp>
  155. -<src/gcode/lcd/M995.cpp>
  156. -<src/gcode/motion/G2_G3.cpp>
  157. -<src/gcode/motion/G5.cpp>
  158. -<src/gcode/motion/G80.cpp>
  159. -<src/gcode/motion/M290.cpp>
  160. -<src/gcode/probe/G30.cpp>
  161. -<src/gcode/probe/G31_G32.cpp>
  162. -<src/gcode/probe/G38.cpp>
  163. -<src/gcode/probe/M401_M402.cpp>
  164. -<src/gcode/probe/M851.cpp>
  165. -<src/gcode/probe/M951.cpp>
  166. -<src/gcode/scara>
  167. -<src/gcode/sd>
  168. -<src/gcode/temp/M104_M109.cpp>
  169. -<src/gcode/units/G20_G21.cpp>
  170. -<src/gcode/units/M149.cpp>
  171. -<src/libs/L64XX> -<src/module/stepper/L64xx.cpp>
  172. -<src/libs/hex_print.cpp>
  173. -<src/libs/least_squares_fit.cpp>
  174. -<src/libs/nozzle.cpp> -<src/gcode/feature/clean>
  175. -<src/module/delta.cpp>
  176. -<src/module/planner_bezier.cpp>
  177. -<src/module/printcounter.cpp>
  178. -<src/module/probe.cpp>
  179. -<src/module/scara.cpp> -<src/gcode/calibrate/M665.cpp>
  180. -<src/module/stepper/TMC26X.cpp>
  181. extra_scripts =
  182. pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  183. pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
  184. build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__ -fmerge-all-constants
  185. lib_deps =
  186. #
  187. # Feature Dependencies
  188. #
  189. [features]
  190. HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/MKS-LittlevGL/archive/master.zip
  191. src_filter=+<src/lcd/extui/lib/mks_ui>
  192. extra_scripts=download_mks_assets.py
  193. HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1
  194. src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
  195. HAS_STEALTHCHOP = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
  196. SR_LCD_3W_NL = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
  197. HAS_I2C_DIGIPOT = SlowSoftI2CMaster
  198. src_filter=+<src/feature/digipot>
  199. HAS_TMC26X = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  200. src_filter=+<src/module/TMC26X.cpp>
  201. HAS_L64XX = Arduino-L6470@0.8.0
  202. src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470>
  203. NEOPIXEL_LED = Adafruit NeoPixel@1.5.0
  204. src_filter=+<src/feature/leds/neopixel.cpp>
  205. MAX6675_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0
  206. HAS_GRAPHICAL_LCD = U8glib-HAL@0.4.1
  207. src_filter=+<src/lcd/dogm>
  208. USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0
  209. USES_LIQUIDTWI2 = LiquidTWI2@1.2.7
  210. DWIN_CREALITY_LCD = src_filter=+<src/lcd/dwin>
  211. HAS_CHARACTER_LCD = src_filter=+<src/lcd/HD44780>
  212. HAS_GRAPHICAL_TFT = src_filter=+<src/lcd/tft>
  213. HAS_LCD_MENU = src_filter=+<src/lcd/menu>
  214. HAS_GAMES = src_filter=+<src/lcd/menu/game/game.cpp>
  215. MARLIN_BRICKOUT = src_filter=+<src/lcd/menu/game/brickout.cpp>
  216. MARLIN_INVADERS = src_filter=+<src/lcd/menu/game/invaders.cpp>
  217. MARLIN_MAZE = src_filter=+<src/lcd/menu/game/maze.cpp>
  218. MARLIN_SNAKE = src_filter=+<src/lcd/menu/game/snake.cpp>
  219. HAS_MENU_BACKLASH = src_filter=+<src/lcd/menu/menu_backlash.cpp>
  220. HAS_MENU_BED_CORNERS = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
  221. LCD_BED_LEVELING = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
  222. HAS_MENU_CANCELOBJECT = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
  223. HAS_MENU_DELTA_CALIBRATE = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
  224. HAS_MENU_FILAMENT = src_filter=+<src/lcd/menu/menu_filament.cpp>
  225. LCD_INFO_MENU = src_filter=+<src/lcd/menu/menu_info.cpp>
  226. HAS_MENU_JOB_RECOVERY = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
  227. HAS_MENU_LED = src_filter=+<src/lcd/menu/menu_led.cpp>
  228. HAS_MENU_MEDIA = src_filter=+<src/lcd/menu/menu_media.cpp>
  229. HAS_MENU_MIXER = src_filter=+<src/lcd/menu/menu_mixer.cpp>
  230. HAS_MENU_MMU2 = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
  231. HAS_MENU_PASSWORD = src_filter=+<src/lcd/menu/menu_password.cpp>
  232. HAS_MENU_POWER_MONITOR = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
  233. HAS_MENU_CUTTER = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
  234. HAS_MENU_TEMPERATURE = src_filter=+<src/lcd/menu/menu_temperature.cpp>
  235. HAS_MENU_TMC = src_filter=+<src/lcd/menu/menu_tmc.cpp>
  236. HAS_MENU_TOUCH_SCREEN = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
  237. HAS_MENU_UBL = src_filter=+<src/lcd/menu/menu_ubl.cpp>
  238. ANYCUBIC_LCD_I3MEGA = src_filter=+<src/lcd/extui/lib/anycubic_i3mega>
  239. HAS_DGUS_LCD = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui_dgus_lcd.cpp>
  240. TOUCH_UI_FTDI_EVE = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
  241. HAS_ANYCUBIC_TFT_EXTUI = src_filter=+<src/lcd/extui_anycubic_tft.cpp>
  242. EXTUI_EXAMPLE = src_filter=+<src/lcd/extui_example.cpp>
  243. MALYAN_LCD = src_filter=+<src/lcd/extui_malyan_lcd.cpp>
  244. HAS_SPI_LCD = src_filter=+<src/lcd/lcdprint.cpp>
  245. USB_FLASH_DRIVE_SUPPORT = src_filter=+<src/sd/usb_flashdrive>
  246. AUTO_BED_LEVELING_BILINEAR = src_filter=+<src/feature/bedlevel/abl>
  247. AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
  248. MESH_BED_LEVELING = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
  249. AUTO_BED_LEVELING_UBL = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
  250. BACKLASH_COMPENSATION = src_filter=+<src/feature/backlash.cpp>
  251. BARICUDA = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
  252. BINARY_FILE_TRANSFER = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
  253. BLTOUCH = src_filter=+<src/feature/bltouch.cpp>
  254. CANCEL_OBJECTS = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
  255. CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight> +<src/gcode/feature/caselight>
  256. EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
  257. USE_CONTROLLER_FAN = src_filter=+<src/feature/controllerfan.cpp>
  258. DAC_STEPPER_CURRENT = src_filter=+<src/feature/dac>
  259. DIRECT_STEPPING = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
  260. EMERGENCY_PARSER = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
  261. I2C_POSITION_ENCODERS = src_filter=+<src/feature/encoder_i2c.cpp>
  262. HAS_FANMUX = src_filter=+<src/feature/fanmux.cpp>
  263. FILAMENT_WIDTH_SENSOR = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
  264. FWRETRACT = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
  265. HOST_ACTION_COMMANDS = src_filter=+<src/feature/host_actions.cpp>
  266. HOTEND_IDLE_TIMEOUT = src_filter=+<src/feature/hotend_idle.cpp>
  267. JOYSTICK = src_filter=+<src/feature/joystick.cpp>
  268. BLINKM = src_filter=+<src/feature/leds/blinkm.cpp>
  269. HAS_COLOR_LEDS = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
  270. PCA9533 = src_filter=+<src/feature/leds/pca9533.cpp>
  271. PCA9632 = src_filter=+<src/feature/leds/pca9632.cpp>
  272. PRINTER_EVENT_LEDS = src_filter=+<src/feature/leds/printer_event_leds.cpp>
  273. TEMP_STAT_LEDS = src_filter=+<src/feature/leds/tempstat.cpp>
  274. MAX7219_DEBUG = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
  275. MIXING_EXTRUDER = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
  276. PRUSA_MMU2 = src_filter=+<src/feature/mmu2> +<src/gcode/feature/prusa_MMU2>
  277. PASSWORD_FEATURE = src_filter=+<src/feature/password> +<src/gcode/feature/password>
  278. ADVANCED_PAUSE_FEATURE = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
  279. AUTO_POWER_CONTROL = src_filter=+<src/feature/power.cpp>
  280. HAS_POWER_MONITOR = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
  281. POWER_LOSS_RECOVERY = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
  282. PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M871.cpp>
  283. HAS_FILAMENT_SENSOR = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
  284. MK2_MULTIPLEXER = src_filter=+<src/feature/snmm.cpp>
  285. EXT_SOLENOID|MANUAL_SOLENOID_CONTROL = src_filter=+<src/feature/solenoid.cpp>
  286. HAS_CUTTER = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
  287. EXPERIMENTAL_I2CBUS = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
  288. Z_STEPPER_AUTO_ALIGN = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
  289. G26_MESH_VALIDATION = src_filter=+<src/gcode/bedlevel/G26.cpp>
  290. ASSISTED_TRAMMING = src_filter=+<src/gcode/bedlevel/G35.cpp>
  291. HAS_MESH = src_filter=+<src/gcode/bedlevel/G42.cpp>
  292. HAS_LEVELING = src_filter=+<src/gcode/bedlevel/M420.cpp>
  293. DELTA_AUTO_CALIBRATION = src_filter=+<src/gcode/calibrate/G33.cpp>
  294. CALIBRATION_GCODE = src_filter=+<src/gcode/calibrate/G425.cpp>
  295. Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+<src/gcode/calibrate/M48.cpp>
  296. M100_FREE_MEMORY_WATCHER = src_filter=+<src/gcode/calibrate/M100.cpp>
  297. BACKLASH_GCODE = src_filter=+<src/gcode/calibrate/M425.cpp>
  298. IS_KINEMATIC = src_filter=+<src/gcode/calibrate/M665.cpp>
  299. HAS_EXTRA_ENDSTOPS = src_filter=+<src/gcode/calibrate/M666.cpp>
  300. SKEW_CORRECTION_GCODE = src_filter=+<src/gcode/calibrate/M852.cpp>
  301. PINS_DEBUGGING = src_filter=-<src/gcode/config/M43.cpp>
  302. NO_VOLUMETRICS = src_filter=-<src/gcode/config/M200-M205.cpp>
  303. HAS_MULTI_EXTRUDER = src_filter=+<src/gcode/config/M217.cpp>
  304. HAS_HOTEND_OFFSET = src_filter=+<src/gcode/config/M218.cpp>
  305. EDITABLE_SERVO_ANGLES = src_filter=+<src/gcode/config/M281.cpp>
  306. PREVENT_COLD_EXTRUSION = src_filter=+<src/gcode/config/M302.cpp>
  307. HAS_USER_THERMISTORS = src_filter=+<src/gcode/config/M305.cpp>
  308. SD_ABORT_ON_ENDSTOP_HIT = src_filter=+<src/gcode/config/M540.cpp>
  309. COOLANT_CONTROL = src_filter=+<src/gcode/control/M7-M9.cpp>
  310. HAS_SOFTWARE_ENDSTOPS = src_filter=+<src/gcode/control/M211.cpp>
  311. HAS_DUPLICATION_MODE = src_filter=+<src/gcode/control/M605.cpp>
  312. LIN_ADVANCE = src_filter=+<src/gcode/feature/advance>
  313. PHOTO_GCODE = src_filter=+<src/gcode/feature/camera>
  314. CONTROLLER_FAN_EDITABLE = src_filter=+<src/gcode/feature/controllerfan>
  315. GCODE_MACROS = src_filter=+<src/gcode/feature/macro>
  316. GRADIENT_MIX = src_filter=+<src/gcode/feature/mixing/M166.cpp>
  317. HAS_SAVED_POSITIONS = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
  318. PARK_HEAD_ON_PAUSE = src_filter=+<src/gcode/feature/pause/M125.cpp>
  319. FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
  320. CNC_WORKSPACE_PLANES = src_filter=+<src/gcode/geometry/G17-G19.cpp>
  321. CNC_COORDINATE_SYSTEMS = src_filter=+<src/gcode/geometry/G53-G59.cpp>
  322. HAS_M206_COMMAND = src_filter=+<src/gcode/geometry/M206_M428.cpp>
  323. EXPECTED_PRINTER_CHECK = src_filter=+<src/gcode/host/M16.cpp>
  324. HOST_KEEPALIVE_FEATURE = src_filter=+<src/gcode/host/M113.cpp>
  325. REPETIER_GCODE_M360 = src_filter=+<src/gcode/host/M360.cpp>
  326. HAS_GCODE_M876 = src_filter=+<src/gcode/host/M876.cpp>
  327. HAS_RESUME_CONTINUE = src_filter=+<src/gcode/lcd/M0_M1.cpp>
  328. HAS_PREHEAT_COUNT = src_filter=+<src/gcode/lcd/M145.cpp>
  329. HAS_LCD_CONTRAST = src_filter=+<src/gcode/lcd/M250.cpp>
  330. LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
  331. TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>
  332. ARC_SUPPORT = src_filter=+<src/gcode/motion/G2_G3.cpp>
  333. GCODE_MOTION_MODES = src_filter=+<src/gcode/motion/G80.cpp>
  334. BABYSTEPPING = src_filter=+<src/gcode/motion/M290.cpp>
  335. Z_PROBE_SLED = src_filter=+<src/gcode/probe/G31_G32.cpp>
  336. G38_PROBE_TARGET = src_filter=+<src/gcode/probe/G38.cpp>
  337. MAGNETIC_PARKING_EXTRUDER = src_filter=+<src/gcode/probe/M951.cpp>
  338. SDSUPPORT = src_filter=+<src/gcode/sd>
  339. HAS_EXTRUDERS = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
  340. INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
  341. TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
  342. NEED_HEX_PRINT = src_filter=+<src/libs/hex_print.cpp>
  343. NEED_LSF = src_filter=+<src/libs/least_squares_fit.cpp>
  344. NOZZLE_PARK_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
  345. NOZZLE_CLEAN_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
  346. DELTA = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
  347. BEZIER_CURVE_SUPPORT = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
  348. PRINTCOUNTER = src_filter=+<src/module/printcounter.cpp>
  349. HAS_BED_PROBE = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
  350. IS_SCARA = src_filter=+<src/module/scara.cpp>
  351. MORGAN_SCARA = src_filter=+<src/gcode/scara>
  352. (ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer
  353. ESP3DLib=https://github.com/luc-github/ESP3DLib.git
  354. arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git
  355. ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git
  356. lib_ignore=ESPAsyncTCP
  357. #
  358. # Default values apply to all 'env:' prefixed environments
  359. #
  360. [env]
  361. framework = arduino
  362. extra_scripts = ${common.extra_scripts}
  363. build_flags = ${common.build_flags}
  364. lib_deps = ${common.lib_deps}
  365. monitor_speed = 250000
  366. monitor_flags =
  367. --quiet
  368. --echo
  369. --eol
  370. LF
  371. --filter
  372. colorize
  373. --filter
  374. time
  375. #################################
  376. # #
  377. # Unique Core Architectures #
  378. # #
  379. # Add a new "env" below if no #
  380. # entry has values suitable to #
  381. # build for a given board. #
  382. # #
  383. #################################
  384. #################################
  385. # #
  386. # AVR Architecture #
  387. # #
  388. #################################
  389. #
  390. # AVR (8-bit) Common Environment values
  391. #
  392. [common_avr8]
  393. board_build.f_cpu = 16000000L
  394. src_filter = ${common.default_src_filter} +<src/HAL/AVR>
  395. #
  396. # ATmega2560
  397. #
  398. [env:mega2560]
  399. platform = atmelavr
  400. extends = common_avr8
  401. board = megaatmega2560
  402. #
  403. # ATmega1280
  404. #
  405. [env:mega1280]
  406. platform = atmelavr
  407. extends = common_avr8
  408. board = megaatmega1280
  409. #
  410. # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
  411. #
  412. [env:MightyBoard1280]
  413. platform = atmelavr
  414. extends = common_avr8
  415. board = ATmega1280
  416. upload_speed = 57600
  417. #
  418. # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
  419. #
  420. [env:MightyBoard2560]
  421. platform = atmelavr
  422. extends = common_avr8
  423. board = ATmega2560
  424. upload_protocol = wiring
  425. upload_speed = 57600
  426. board_upload.maximum_size = 253952
  427. #
  428. # RAMBo
  429. #
  430. [env:rambo]
  431. platform = atmelavr
  432. extends = common_avr8
  433. board = reprap_rambo
  434. #
  435. # FYSETC F6 V1.3
  436. #
  437. [env:FYSETC_F6_13]
  438. platform = atmelavr
  439. extends = common_avr8
  440. board = fysetc_f6_13
  441. #
  442. # FYSETC F6 V1.4
  443. #
  444. [env:FYSETC_F6_14]
  445. platform = atmelavr
  446. extends = common_avr8
  447. board = fysetc_f6_14
  448. #
  449. # Sanguinololu (ATmega644p)
  450. #
  451. [env:sanguino644p]
  452. platform = atmelavr
  453. extends = common_avr8
  454. board = sanguino_atmega644p
  455. #
  456. # Sanguinololu (ATmega1284p)
  457. #
  458. [env:sanguino1284p]
  459. platform = atmelavr
  460. extends = common_avr8
  461. board = sanguino_atmega1284p
  462. board_upload.maximum_size = 126976
  463. #
  464. # Melzi and clones (ATmega1284p)
  465. #
  466. [env:melzi]
  467. platform = atmelavr
  468. extends = common_avr8
  469. board = sanguino_atmega1284p
  470. upload_speed = 57600
  471. board_upload.maximum_size = 126976
  472. #
  473. # Melzi and clones (Optiboot bootloader)
  474. #
  475. [env:melzi_optiboot]
  476. platform = atmelavr
  477. extends = common_avr8
  478. board = sanguino_atmega1284p
  479. upload_speed = 115200
  480. #
  481. # Melzi and clones (Zonestar Melzi2 with tuned flags)
  482. #
  483. [env:melzi_optimized]
  484. platform = atmelavr
  485. extends = env:melzi_optiboot
  486. build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues
  487. build_unflags = -g -ggdb
  488. #
  489. # AT90USB1286 boards using CDC bootloader
  490. # - BRAINWAVE
  491. # - BRAINWAVE_PRO
  492. # - SAV_MKI
  493. # - TEENSYLU
  494. #
  495. [env:at90usb1286_cdc]
  496. platform = teensy
  497. extends = common_avr8
  498. board = at90usb1286
  499. #
  500. # AT90USB1286 boards using DFU bootloader
  501. # - PrintrBoard
  502. # - PrintrBoard Rev.F
  503. # - ? 5DPRINT ?
  504. #
  505. [env:at90usb1286_dfu]
  506. platform = teensy
  507. extends = env:at90usb1286_cdc
  508. #################################
  509. # #
  510. # DUE Architecture #
  511. # #
  512. #################################
  513. #
  514. # Due (Atmel SAM3X8E ARM Cortex-M3)
  515. #
  516. # - RAMPS4DUE
  517. # - RADDS
  518. #
  519. [env:DUE]
  520. platform = atmelsam
  521. board = due
  522. src_filter = ${common.default_src_filter} +<src/HAL/DUE>
  523. [env:DUE_USB]
  524. platform = atmelsam
  525. extends = env:DUE
  526. board = dueUSB
  527. [env:DUE_debug]
  528. # Used when WATCHDOG_RESET_MANUAL is enabled
  529. platform = atmelsam
  530. extends = env:DUE
  531. build_flags = ${common.build_flags}
  532. -funwind-tables
  533. -mpoke-function-name
  534. #
  535. # Archim SAM
  536. #
  537. [common_DUE_archim]
  538. platform = atmelsam
  539. extends = env:DUE
  540. build_flags = ${common.build_flags}
  541. -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON
  542. extra_scripts = ${common.extra_scripts}
  543. Marlin/src/HAL/DUE/upload_extra_script.py
  544. [env:DUE_archim]
  545. platform = ${common_DUE_archim.platform}
  546. extends = common_DUE_archim
  547. # Used when WATCHDOG_RESET_MANUAL is enabled
  548. [env:DUE_archim_debug]
  549. platform = ${common_DUE_archim.platform}
  550. extends = common_DUE_archim
  551. build_flags = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name
  552. #################################
  553. # #
  554. # SAMD51 Architecture #
  555. # #
  556. #################################
  557. #
  558. # Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
  559. #
  560. [env:SAMD51_grandcentral_m4]
  561. platform = atmelsam
  562. board = adafruit_grandcentral_m4
  563. build_flags = ${common.build_flags} -std=gnu++17
  564. build_unflags = -std=gnu++11
  565. src_filter = ${common.default_src_filter} +<src/HAL/SAMD51>
  566. lib_deps = ${common.lib_deps}
  567. SoftwareSerialM
  568. Adafruit SPIFlash
  569. custom_marlin.SDSUPPORT = SdFat - Adafruit Fork
  570. debug_tool = jlink
  571. #################################
  572. # #
  573. # LPC176x Architecture #
  574. # #
  575. #################################
  576. #
  577. # NXP LPC176x ARM Cortex-M3
  578. #
  579. [common_LPC]
  580. platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip
  581. board = nxp_lpc1768
  582. lib_ldf_mode = off
  583. lib_compat_mode = strict
  584. extra_scripts = ${common.extra_scripts}
  585. Marlin/src/HAL/LPC1768/upload_extra_script.py
  586. src_filter = ${common.default_src_filter} +<src/HAL/LPC1768>
  587. lib_deps = ${common.lib_deps}
  588. Servo
  589. custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0
  590. custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
  591. build_flags = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g
  592. # debug options for backtrace
  593. #-funwind-tables
  594. #-mpoke-function-name
  595. #
  596. # NXP LPC176x ARM Cortex-M3
  597. #
  598. [env:LPC1768]
  599. platform = ${common_LPC.platform}
  600. extends = common_LPC
  601. board = nxp_lpc1768
  602. [env:LPC1769]
  603. platform = ${common_LPC.platform}
  604. extends = common_LPC
  605. board = nxp_lpc1769
  606. #################################
  607. # #
  608. # STM32 Architecture #
  609. # #
  610. #################################
  611. #
  612. # HAL/STM32 Base Environment values
  613. #
  614. [common_stm32]
  615. platform = ststm32@~6.1.0
  616. platform_packages = framework-arduinoststm32@>=4.10700,<4.10800
  617. lib_ignore = SoftwareSerial
  618. build_flags = ${common.build_flags}
  619. -IMarlin/src/HAL/STM32 -std=gnu++14
  620. -DUSBCON -DUSBD_USE_CDC
  621. -DUSBD_VID=0x0483
  622. -DTIM_IRQ_PRIO=13
  623. build_unflags = -std=gnu++11
  624. src_filter = ${common.default_src_filter} +<src/HAL/STM32>
  625. #
  626. # HAL/STM32F1 Common Environment values
  627. #
  628. [common_stm32f1]
  629. platform = ${common_stm32.platform}
  630. build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
  631. ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL
  632. build_unflags = -std=gnu11 -std=gnu++11
  633. src_filter = ${common.default_src_filter} +<src/HAL/STM32F1>
  634. lib_ignore = SPI
  635. lib_deps = ${common.lib_deps}
  636. SoftwareSerialM
  637. #
  638. # STM32F103RC
  639. #
  640. [env:STM32F103RC]
  641. platform = ${common_stm32f1.platform}
  642. extends = common_stm32f1
  643. board = genericSTM32F103RC
  644. platform_packages = tool-stm32duino
  645. monitor_speed = 115200
  646. #
  647. # MEEB_3DP (STM32F103RCT6 with 512K)
  648. #
  649. [env:STM32F103RC_meeb]
  650. platform = ${common_stm32f1.platform}
  651. extends = common_stm32f1
  652. board = MEEB_3DP
  653. platform_packages = tool-stm32duino
  654. build_flags = ${common_stm32f1.build_flags}
  655. -DDEBUG_LEVEL=0
  656. -DSS_TIMER=4
  657. -DSTM32_FLASH_SIZE=512
  658. -DHSE_VALUE=12000000U
  659. -DUSE_USB_COMPOSITE
  660. -DVECT_TAB_OFFSET=0x2000
  661. -DGENERIC_BOOTLOADER
  662. extra_scripts = ${common.extra_scripts}
  663. pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  664. buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
  665. lib_deps = ${common.lib_deps}
  666. SoftwareSerialM
  667. USBComposite for STM32F1@0.91
  668. custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
  669. debug_tool = stlink
  670. upload_protocol = dfu
  671. #
  672. # STM32F103RC_fysetc
  673. #
  674. [env:STM32F103RC_fysetc]
  675. platform = ${common_stm32f1.platform}
  676. extends = env:STM32F103RC
  677. extra_scripts = ${common.extra_scripts}
  678. buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
  679. build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0
  680. lib_ldf_mode = chain
  681. debug_tool = stlink
  682. upload_protocol = serial
  683. #
  684. # BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
  685. #
  686. # STM32F103RC_btt ............. RCT6 with 256K
  687. # STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
  688. # STM32F103RC_btt_512K ........ RCT6 with 512K
  689. # STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage)
  690. #
  691. [env:STM32F103RC_btt]
  692. platform = ${common_stm32f1.platform}
  693. extends = env:STM32F103RC
  694. extra_scripts = ${common.extra_scripts}
  695. buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
  696. build_flags = ${common_stm32f1.build_flags}
  697. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  698. monitor_speed = 115200
  699. [env:STM32F103RC_btt_USB]
  700. platform = ${common_stm32f1.platform}
  701. extends = env:STM32F103RC_btt
  702. build_flags = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE
  703. lib_deps = ${env:STM32F103RC_btt.lib_deps}
  704. USBComposite for STM32F1@0.91
  705. [env:STM32F103RC_btt_512K]
  706. platform = ${common_stm32f1.platform}
  707. extends = env:STM32F103RC_btt
  708. board_upload.maximum_size=524288
  709. build_flags = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512
  710. [env:STM32F103RC_btt_512K_USB]
  711. platform = ${common_stm32f1.platform}
  712. extends = env:STM32F103RC_btt_512K
  713. build_flags = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE
  714. lib_deps = ${env:STM32F103RC_btt_512K.lib_deps}
  715. USBComposite for STM32F1@0.91
  716. #
  717. # STM32F103RE
  718. #
  719. [env:STM32F103RE]
  720. platform = ${common_stm32f1.platform}
  721. extends = common_stm32f1
  722. board = genericSTM32F103RE
  723. platform_packages = tool-stm32duino
  724. monitor_speed = 115200
  725. #
  726. # STM32F103RE_btt ............. RET6
  727. # STM32F103RE_btt_USB ......... RET6 (USB mass storage)
  728. #
  729. [env:STM32F103RE_btt]
  730. platform = ${common_stm32f1.platform}
  731. extends = env:STM32F103RE
  732. extra_scripts = ${common.extra_scripts}
  733. buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py
  734. build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4
  735. debug_tool = stlink
  736. upload_protocol = stlink
  737. [env:STM32F103RE_btt_USB]
  738. platform = ${common_stm32f1.platform}
  739. extends = env:STM32F103RE_btt
  740. build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE
  741. lib_deps = ${common_stm32f1.lib_deps}
  742. USBComposite for STM32F1@0.91
  743. #
  744. # STM32F4 with STM32GENERIC
  745. #
  746. [env:STM32F4]
  747. platform = ${common_stm32.platform}
  748. board = disco_f407vg
  749. build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
  750. src_filter = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F7>
  751. #
  752. # STM32F7 with STM32GENERIC
  753. #
  754. [env:STM32F7]
  755. platform = ${common_stm32.platform}
  756. board = remram_v1
  757. build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
  758. src_filter = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F4>
  759. #
  760. # ARMED (STM32)
  761. #
  762. [env:ARMED]
  763. platform = ${common_stm32.platform}
  764. extends = common_stm32
  765. board = armed_v1
  766. build_flags = ${common_stm32.build_flags}
  767. '-DUSB_PRODUCT="ARMED_V1"'
  768. -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
  769. #
  770. # Geeetech GTM32 (STM32F103VET6)
  771. #
  772. [env:STM32F103VE_GTM32]
  773. platform = ${common_stm32f1.platform}
  774. extends = common_stm32f1
  775. board = genericSTM32F103VE
  776. build_flags = ${common_stm32f1.build_flags}
  777. -ffunction-sections -fdata-sections -nostdlib -MMD
  778. -DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v
  779. -DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000
  780. -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  781. upload_protocol = serial
  782. #
  783. # Longer 3D board in Alfawise U20 (STM32F103VET6)
  784. #
  785. [env:STM32F103VE_longer]
  786. platform = ${common_stm32f1.platform}
  787. extends = common_stm32f1
  788. board = genericSTM32F103VE
  789. extra_scripts = ${common.extra_scripts}
  790. buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
  791. build_flags = ${common_stm32f1.build_flags}
  792. -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
  793. build_unflags = ${common_stm32f1.build_unflags}
  794. -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  795. lib_ignore = ${common_stm32f1.lib_ignore}
  796. #
  797. # MKS Robin Mini (STM32F103VET6)
  798. #
  799. [env:mks_robin_mini]
  800. platform = ${common_stm32f1.platform}
  801. extends = common_stm32f1
  802. board = genericSTM32F103VE
  803. extra_scripts = ${common.extra_scripts}
  804. buildroot/share/PlatformIO/scripts/mks_robin_mini.py
  805. build_flags = ${common_stm32f1.build_flags}
  806. -DMCU_STM32F103VE
  807. #
  808. # MKS Robin Nano (STM32F103VET6)
  809. # v1.2 - Emulated Graphical 128x64 (DOGM) UI and LVGL UI
  810. # v2.0 - LVGL UI
  811. #
  812. [env:mks_robin_nano35]
  813. platform = ${common_stm32f1.platform}
  814. extends = common_stm32f1
  815. board = genericSTM32F103VE
  816. platform_packages = tool-stm32duino
  817. extra_scripts = ${common.extra_scripts}
  818. buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
  819. build_flags = ${common_stm32f1.build_flags}
  820. -DMCU_STM32F103VE -DSS_TIMER=4
  821. debug_tool = jlink
  822. upload_protocol = jlink
  823. #
  824. # MKS Robin (STM32F103ZET6)
  825. #
  826. [env:mks_robin]
  827. platform = ${common_stm32f1.platform}
  828. extends = common_stm32f1
  829. board = genericSTM32F103ZE
  830. extra_scripts = ${common.extra_scripts}
  831. buildroot/share/PlatformIO/scripts/mks_robin.py
  832. build_flags = ${common_stm32f1.build_flags}
  833. -DSS_TIMER=4 -DSTM32_XL_DENSITY
  834. # MKS Robin (STM32F103ZET6)
  835. # Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
  836. #
  837. [env:mks_robin_stm32]
  838. platform = ${common_stm32.platform}
  839. extends = common_stm32
  840. board = genericSTM32F103ZE
  841. board_build.core = stm32
  842. board_build.variant = MARLIN_F103Zx
  843. board_build.ldscript = ldscript.ld
  844. board_build.offset = 0x7000
  845. board_build.firmware = Robin.bin
  846. build_flags = ${common_stm32.build_flags}
  847. -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
  848. build_unflags = ${common_stm32.build_unflags}
  849. -DUSBCON -DUSBD_USE_CDC
  850. extra_scripts = ${common.extra_scripts}
  851. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  852. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  853. buildroot/share/PlatformIO/scripts/mks_encrypt.py
  854. lib_deps =
  855. #
  856. # MKS Robin Pro (STM32F103ZET6)
  857. #
  858. [env:mks_robin_pro]
  859. platform = ${common_stm32f1.platform}
  860. extends = env:mks_robin
  861. extra_scripts = ${common.extra_scripts}
  862. buildroot/share/PlatformIO/scripts/mks_robin_pro.py
  863. #
  864. # TRIGORILLA PRO (STM32F103ZET6)
  865. #
  866. [env:trigorilla_pro]
  867. platform = ${common_stm32f1.platform}
  868. extends = env:mks_robin
  869. extra_scripts = ${common.extra_scripts}
  870. #
  871. # MKS Robin E3D (STM32F103RCT6) and
  872. # MKS Robin E3 with TMC2209
  873. #
  874. [env:mks_robin_e3]
  875. platform = ${common_stm32f1.platform}
  876. extends = common_stm32f1
  877. board = genericSTM32F103RC
  878. platform_packages = tool-stm32duino
  879. extra_scripts = ${common.extra_scripts}
  880. buildroot/share/PlatformIO/scripts/mks_robin_e3.py
  881. build_flags = ${common_stm32f1.build_flags}
  882. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  883. #
  884. # MKS Robin Lite/Lite2 (STM32F103RCT6)
  885. #
  886. [env:mks_robin_lite]
  887. platform = ${common_stm32f1.platform}
  888. extends = common_stm32f1
  889. board = genericSTM32F103RC
  890. extra_scripts = ${common.extra_scripts}
  891. buildroot/share/PlatformIO/scripts/mks_robin_lite.py
  892. #
  893. # MKS ROBIN LITE3 (STM32F103RCT6)
  894. #
  895. [env:mks_robin_lite3]
  896. platform = ${common_stm32f1.platform}
  897. extends = common_stm32f1
  898. board = genericSTM32F103RC
  899. extra_scripts = ${common.extra_scripts}
  900. buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
  901. #
  902. # JGAurora A5S A1 (STM32F103ZET6)
  903. #
  904. [env:jgaurora_a5s_a1]
  905. platform = ${common_stm32f1.platform}
  906. extends = common_stm32f1
  907. board = genericSTM32F103ZE
  908. extra_scripts = ${common.extra_scripts}
  909. buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
  910. build_flags = ${common_stm32f1.build_flags}
  911. -DSTM32F1xx -DSTM32_XL_DENSITY
  912. #
  913. # Malyan M200 (STM32F103CB)
  914. #
  915. [env:STM32F103CB_malyan]
  916. platform = ${common_stm32f1.platform}
  917. extends = common_stm32f1
  918. board = malyanM200
  919. build_flags = ${common_stm32f1.build_flags}
  920. -DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections
  921. -Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
  922. lib_ignore = ${common_stm32f1.lib_ignore}
  923. SoftwareSerialM
  924. #
  925. # Malyan M200 v2 (STM32F070RB)
  926. #
  927. [env:STM32F070RB_malyan]
  928. platform = ${common_stm32.platform}
  929. extends = common_stm32
  930. board = malyanM200v2
  931. build_flags = ${common_stm32.build_flags} -DSTM32F0xx -DUSB_PRODUCT=\"STM32F070RB\" -DHAL_PCD_MODULE_ENABLED
  932. -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
  933. -DCUSTOM_STARTUP_FILE
  934. lib_ignore = SoftwareSerial
  935. #
  936. # Malyan M300 (STM32F070CB)
  937. #
  938. [env:malyan_M300]
  939. platform = ststm32@>=6.1.0,<6.2.0
  940. board = malyanm300_f070cb
  941. build_flags = ${common.build_flags}
  942. -DUSBCON -DUSBD_VID=0x0483 "-DUSB_MANUFACTURER=\"Unknown\"" "-DUSB_PRODUCT=\"MALYAN_M300\""
  943. -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED
  944. src_filter = ${common.default_src_filter} +<src/HAL/STM32>
  945. #
  946. # Chitu boards like Tronxy X5s (STM32F103ZET6)
  947. #
  948. [env:chitu_f103]
  949. platform = ${common_stm32f1.platform}
  950. extends = common_stm32f1
  951. board = CHITU_F103
  952. extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  953. pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  954. buildroot/share/PlatformIO/scripts/chitu_crypt.py
  955. build_flags = ${common_stm32f1.build_flags}
  956. -DSTM32F1xx -DSTM32_XL_DENSITY
  957. build_unflags = ${common_stm32f1.build_unflags}
  958. -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  959. #
  960. # Some Chitu V5 boards have a problem with GPIO init.
  961. # Use this target if G28 or G29 are always failing.
  962. #
  963. [env:chitu_v5_gpio_init]
  964. platform = ${common_stm32f1.platform}
  965. extends = env:chitu_f103
  966. build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
  967. #
  968. # Creality (STM32F103RET6)
  969. #
  970. [env:STM32F103RET6_creality]
  971. platform = ${common_stm32f1.platform}
  972. extends = common_stm32f1
  973. board = genericSTM32F103RC
  974. build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
  975. ${common.build_flags} -std=gnu++14 -DSTM32_XL_DENSITY -DTEMP_TIMER_CHAN=4
  976. extra_scripts = ${common.extra_scripts}
  977. pre:buildroot/share/PlatformIO/scripts/random-bin.py
  978. buildroot/share/PlatformIO/scripts/creality.py
  979. lib_ignore = ${common_stm32f1.lib_ignore}
  980. debug_tool = jlink
  981. upload_protocol = jlink
  982. monitor_speed = 115200
  983. #
  984. # STM32F401VE
  985. # 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
  986. #
  987. [env:STM32F401VE_STEVAL]
  988. platform = ${common_stm32.platform}
  989. extends = common_stm32
  990. board = STEVAL_STM32F401VE
  991. build_flags = ${common_stm32.build_flags}
  992. -DTARGET_STM32F4 -DARDUINO_STEVAL -DSTM32F401xE
  993. -DUSB_PRODUCT=\"STEVAL_F401VE\"
  994. -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
  995. extra_scripts = ${common.extra_scripts}
  996. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  997. buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py
  998. lib_ignore = SoftwareSerial
  999. #
  1000. # FLYF407ZG
  1001. #
  1002. [env:FLYF407ZG]
  1003. platform = ${common_stm32.platform}
  1004. extends = common_stm32
  1005. board = FLYF407ZG
  1006. build_flags = ${common_stm32.build_flags}
  1007. -DSTM32F4 -DUSB_PRODUCT=\"STM32F407ZG\"
  1008. -DTARGET_STM32F4 -DVECT_TAB_OFFSET=0x8000
  1009. extra_scripts = ${common.extra_scripts}
  1010. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1011. #
  1012. # FYSETC S6 (STM32F446VET6 ARM Cortex-M4)
  1013. #
  1014. [env:FYSETC_S6]
  1015. platform = ${common_stm32.platform}
  1016. extends = common_stm32
  1017. platform_packages = ${common_stm32.platform_packages}
  1018. tool-stm32duino
  1019. board = fysetc_s6
  1020. build_flags = ${common_stm32.build_flags}
  1021. -DTARGET_STM32F4 -DVECT_TAB_OFFSET=0x10000
  1022. -DHAL_PCD_MODULE_ENABLED '-DUSB_PRODUCT="FYSETC_S6"'
  1023. extra_scripts = ${common.extra_scripts}
  1024. pre:buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
  1025. debug_tool = stlink
  1026. upload_protocol = dfu
  1027. upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
  1028. #
  1029. # STM32F407VET6 with RAMPS-like shield
  1030. # 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
  1031. # Shield - https://github.com/jmz52/Hardware
  1032. #
  1033. [env:STM32F407VE_black]
  1034. platform = ${common_stm32.platform}
  1035. extends = common_stm32
  1036. board = blackSTM32F407VET6
  1037. build_flags = ${common_stm32.build_flags}
  1038. -DTARGET_STM32F4 -DARDUINO_BLACK_F407VE
  1039. -DUSB_PRODUCT=\"BLACK_F407VE\"
  1040. -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
  1041. extra_scripts = ${common.extra_scripts}
  1042. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1043. lib_ignore = SoftwareSerial
  1044. #
  1045. # BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
  1046. #
  1047. [env:BIGTREE_SKR_PRO]
  1048. platform = ${common_stm32.platform}
  1049. extends = common_stm32
  1050. board = BigTree_SKR_Pro
  1051. build_flags = ${common_stm32.build_flags}
  1052. -DUSB_PRODUCT=\"STM32F407ZG\"
  1053. -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
  1054. extra_scripts = ${common.extra_scripts}
  1055. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1056. #upload_protocol = stlink
  1057. #upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
  1058. debug_tool = stlink
  1059. debug_init_break =
  1060. #
  1061. # Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
  1062. #
  1063. [env:BIGTREE_GTR_V1_0]
  1064. platform = ststm32@>=5.7.0,<6.2.0
  1065. extends = common_stm32
  1066. board = BigTree_GTR_v1
  1067. extra_scripts = ${common.extra_scripts}
  1068. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1069. build_flags = ${common_stm32.build_flags}
  1070. -DUSB_PRODUCT=\"STM32F407IG\"
  1071. -DTARGET_STM32F4 -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
  1072. #
  1073. # BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
  1074. #
  1075. [env:BIGTREE_BTT002]
  1076. platform = ${common_stm32.platform}
  1077. extends = common_stm32
  1078. board = BigTree_Btt002
  1079. build_flags = ${common_stm32.build_flags}
  1080. -DUSB_PRODUCT=\"STM32F407VG\"
  1081. -DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
  1082. -DHAVE_HWSERIAL2
  1083. -DHAVE_HWSERIAL3
  1084. -DPIN_SERIAL2_RX=PD_6
  1085. -DPIN_SERIAL2_TX=PD_5
  1086. extra_scripts = ${common.extra_scripts}
  1087. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1088. #
  1089. # Lerdge base
  1090. #
  1091. [lerdge_common]
  1092. platform = ${common_stm32.platform}
  1093. extends = common_stm32
  1094. board = LERDGE
  1095. board_build.offset = 0x10000
  1096. extra_scripts = ${common.extra_scripts}
  1097. pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
  1098. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  1099. buildroot/share/PlatformIO/scripts/lerdge.py
  1100. build_flags = ${common_stm32.build_flags}
  1101. -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
  1102. -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
  1103. -DTRANSFER_CLOCK_DIV=8 -DHAL_SRAM_MODULE_ENABLED
  1104. build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
  1105. #
  1106. # Lerdge X
  1107. #
  1108. [env:LERDGEX]
  1109. extends = lerdge_common
  1110. board_build.firmware = Lerdge_X_firmware_force.bin
  1111. #
  1112. # Lerdge S
  1113. #
  1114. [env:LERDGES]
  1115. extends = lerdge_common
  1116. board_build.firmware = Lerdge_firmware_force.bin
  1117. #
  1118. # Lerdge K
  1119. #
  1120. [env:LERDGEK]
  1121. extends = lerdge_common
  1122. board_build.firmware = Lerdge_K_firmware_force.bin
  1123. build_flags = ${lerdge_common.build_flags}
  1124. -DLERDGEK
  1125. #
  1126. # RUMBA32
  1127. #
  1128. [env:rumba32]
  1129. platform = ${common_stm32.platform}
  1130. extends = common_stm32
  1131. build_flags = ${common_stm32.build_flags}
  1132. -Os
  1133. "-DUSB_PRODUCT=\"RUMBA32\""
  1134. -DHAL_PCD_MODULE_ENABLED
  1135. -DDISABLE_GENERIC_SERIALUSB
  1136. -DHAL_UART_MODULE_ENABLED
  1137. board = rumba32_f446ve
  1138. upload_protocol = dfu
  1139. monitor_speed = 500000
  1140. #################################
  1141. # #
  1142. # Other Architectures #
  1143. # #
  1144. #################################
  1145. #
  1146. # Espressif ESP32
  1147. #
  1148. [env:esp32]
  1149. platform = espressif32@1.11.2
  1150. board = esp32dev
  1151. build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0
  1152. src_filter = ${common.default_src_filter} +<src/HAL/ESP32>
  1153. upload_speed = 115200
  1154. #upload_port = marlinesp.local
  1155. #board_build.flash_mode = qio
  1156. #
  1157. # Teensy 3.1 / 3.2 (ARM Cortex-M4)
  1158. #
  1159. [env:teensy31]
  1160. platform = teensy
  1161. board = teensy31
  1162. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY31_32>
  1163. #
  1164. # Teensy 3.5 / 3.6 (ARM Cortex-M4)
  1165. #
  1166. [env:teensy35]
  1167. platform = teensy
  1168. board = teensy35
  1169. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
  1170. #
  1171. # Native
  1172. # No supported Arduino libraries, base Marlin only
  1173. #
  1174. [env:linux_native]
  1175. platform = native
  1176. framework =
  1177. build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
  1178. src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include
  1179. build_unflags = -Wall
  1180. lib_ldf_mode = off
  1181. lib_deps =
  1182. src_filter = ${common.default_src_filter} +<src/HAL/LINUX>
  1183. #
  1184. # Just print the dependency tree
  1185. #
  1186. [env:include_tree]
  1187. platform = atmelavr
  1188. board = megaatmega2560
  1189. build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
  1190. src_filter = +<src/MarlinCore.cpp>